Vado vf0570 and windows 7-64 bit

of course everything worked great on xp but now with windows 7, the vado is not recognized
downloaded and installed both VCTRL_PCAPP_LA_2_0_04.exe, windows 7 had issues here, but issues went away when invoking the compatibility option and VADO_PCAPP_LA__0_06.exe installed with now win 7 complaints.
anybody have any luck with the vado vf0570 and win7?
has creative actually revamped these programs to work with win7 64 bit's?
any help or ideas appreciated
bob

devolic wrote:
Can I use Network Magic Pro to share files, and the printer between the two operating systems?
Hi devolic,
Read this thread.
http://forums.linksysbycisco.com/linksys/board/message?board.id=Network_Magic&message.id=1645#M1645
thecreator - Running Network Magic version -5.5..9195.0-Pure0 on Windows XP Home Edition SP 3
Running Network Magic version -5.5.9195.0-Pure0 on Wireless Computer with McAfee Personal Firewall Build 11.5.131 Wireless Computer has D-Link DWA-552 connecting to D-Link DIR-655 A3 Router.

Similar Messages

Hi all, i can't sync over wifi between my iPhone 4 and Windows 7 64 bit, wifi sync works with the same phone and my Windows 8 machine, tried solutions from other threads with no luck, just thought i'd see if anyone else had any ideas, thanks.

Hi all, i can't sync over wifi between my iPhone 4 and Windows 7 64 bit, wifi sync works with the same phone and my Windows 8 machine so the problem seems confined to Windows 7. I've tried solutions from other threads -
Making sure everything is allowed through firewall
Rebooting phone/laptop/router
Disabling ipv6
Disabling all networks except the one curently on
Re-installing iTunes
Restoring iPhone
No luck with any of those unfortunately so i just thought i'd see if anyone else is still without wifi sync after trying those as well and if you ever found a fix, thanks.

I just wanted to leave a note that it's working now. I'm not sure if it was the latest iTunes update that got it working or that i decided to start a new library instead of using the one i had backed up on Windows 8 (it didn't occur to me to check using the old library when i re-installed iTunes). But if anyone is having this problem, it might be worth trying again with a new installation of iTunes to see if the latest update works for you, and if not, try using a fresh library instead of a backup (by fresh library i mean discard your old library completely and start a new library, not just restore as new iPhone, a whole new library).

TS1717 iTunes 11 and Windows 7 (32 bit). iTunes crashes frequently (Windows message : "iTunes has stopped working and will be closed").

iTunes 11.0.1.12 and Windows 7 (32 bit, latest version). iTunes crashes frequently (Windows message : "iTunes has stopped working and will be closed"). I may be trying to search for an App. or book (or anything else), trying to access iTunes store, checking for updates to Apps., inputting my password, etc. etc. I have uninstalled iTunes several times, reinstalled several times, but the error persists. I tried the iTunes 10 suggested fix of running in safe mode, but iTunes again crashed when I was trying to create a new ID.
Any real help would be gratefully received. Thank you.

Still having this issue

TS2529 Tried everything. Still get "backup could not be saved on the computer". Have iPad 1 and Windows 7 (64 bit) with all latest updates.

Tried everything. Still get "backup could not be saved on the computer". Have iPad 1 and Windows 7 (64 bit) with all latest updates. Now what? Is iPad 1 now incompatible with iTunes?

Have you tried here:
iOS: Troubleshooting backup issues in iTunes
Have you tried deleig the existing backup file? I\You can find it location here:
iTunes: About iOS backups
Saying your tried everything provides us with zero information as to what you did try.

Missing *.inf driver for 2605dtn and windows 7 64 bit

missing *.inf driver for 2605dtn and windows 7 64 bit
I just piurchased a new HP laptop with windows 7 64 bit installed. I do not have any windows 7 disks.
Where do I obtain the necessary drivers for this printer?

HI RandyJohnson,
You do not need to download drivers for this product. Print drivers for your product are available within the Windows 7 operating system. Use Devices and Printers, formerly known as the Add Printer Wizard, to obtain the Windows 7 update. For more information, go to Install the Printer Driver through the Windows 7 Operating System (c02536257) (in English).
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Screen print imac with bootcamp and windows 7 64 bit

I have a new 27" Imac i7. I have boot camp installed and windows 7 64 bit. I have auto-cad installed for college. There are several assignments that require a screen print to turn in. I have not been able to figure this out. I have been using the snipping tool, but in certain instances i need a menu drop down included in the screen print. With the snipping tool the menu goes away. I have looked for some ways to do a screen print while in windows, and have been unsuccessful. I have a wireless apple keyboard, the shorter one. The F keys are enabled to be used as the real F keys without using the fn key on the windows side. So when i hit F10 for example it is the real F10 function. Does anyone have any ideas?

I can get those keys to work if i make the keyboard use the shortcut keys that are listed on the top. For example, if i want to use the f10-f12 keys to control the volume without having to hit the fn key. If i set the keyboard up that way that key combo will work. But if i set up the keyboard to use the f keys really be f keys without hitting the fn key, it will not work. Would you know how to get it like that? I have tried just leaving the fn key out of that combo and it will not work.

Adobe Reader X 10.1 Install Failing on XP SP3 and Windows 7 (64 bit)

After using the Customization Wizard 10 to create an .mst and executing the install via SCCM 2007 which I have done many times before, I am getting the following error on both the XP SP3 and Windows 7 (64 bit) machines in the Application Event Log:
Product: Adobe Reader X (10.1.0) -- Error 2229.Database: . Could not load table 'ServiceInstall' in SQL query: SELECT `Name`,`DisplayName`,`ServiceType`,`StartType`,`ErrorControl`,`LoadOrderGroup`,`Dependenc ies`,`StartName`,`Password`,`ComponentId`,`Directory_`,`FileName`,`Arguments`,`Description ` FROM `ServiceInstall`, `Component`, `File` WHERE `ServiceInstall`.`Component_` = `Component`.`Component` AND (`Component`.`KeyPath` = `File`.`File`) AND (`Action` = 1 OR `Action` = 2).
I used the following .msi to create the.mst:
AdbeRdr1010_en_US.msi
Does anyone know where to go from here?
Thanks, Sandy

I have found another possible bug affecting network printing with 10.1.2 in Protected Mode on XP SP3 machines that has not been previously documented:
A number of users in one office were not able to print with 10.1.2 in Protected Mode (even with the printing hotfix/patch previously released) to their default printer; however they were able to print fine with 10.0.1 in Protected Mode OR by disabling Protected Mode in 10.1.2. They could print to Microsoft XPS Document Writer, however.
The cause was determined to be an issue with capitilization of the printer name in the registry! 10.1.2 in Protected Mode seems to be sensitive to this for some strange reason, though other apps don't care.
Check the following keys and ensure the capitalization of any references to name of your printer (or UNC path of the printer share) is consistent:
HKCU\Printers\Connections
HKCU\Printers\Settings
HKCU\software\microsoft\windows nt\currentversion\windows\Device
In our case, the reference to the name of the default printer was in lowercase, while the printer path recorded under settings was in UPPERCASE. Changing this to match immediately fixed the problem.

Wheel Mousr fix and Windows 7 64 bit

I am using Visual Basic 6 and Window 7 64 bit for my OS. I have the wheel mouse fix for XP, and it also works in Windows 7 32 bit, like the fix did for XP. The Wheel Mouse Fix works fine in Windows 7 32 bit, but doesn't using Windows 7 64 bit. It will
move sometimes, but not like in a 32 bit OS. How can I get the Wheel mouse fix to work using Windows 7 64 bit??? Is there some way to make it call the Program Files(x86) folder???
The command line for registering the DLL is:
Click Start, click Run, type regsvr32 C:\VBMouse\VB6IDEMouseWheelAddin.dll, and then click OK.
Like I said it works fine for 32 bit, but not using 64 bit. Anyone out there have any ideas.
Thanks,
dabeartn

Hi,
I'm very pleased to say that I've just this minute figured this one out.
I'm assuming you've grabbed the download from here:
http://support.microsoft.com/kb/837910
The solution is here:
http://support.microsoft.com/kb/282747
What I suggest you do is:
1. Put VB6IDEMouseWheelAddin.dll somewhere where it can live forever more - I went for C:\Windows
2. Open a command prompt (I opened mine as Admin, not sure if it's necessary but why not eh?)
3. cd \windows\syswow64
4. regsvr32 c:\Windows\VB6IDEMouseWheelAddin.dll
Then open VB6 as usual, under the Add-Ins menu click on Add-In Manager and you should see MouseWheel Fix at the very top. Just tick the Load Behavior boxes as you wish and that's it.
Cheers,
Nick
Cheers, Nick

HT5634 27 in late 2009 iMac and using bootcamp 4 and windows 8 64 bit I am getting a error message upon startup

I have a 27 in late 2009 iMac and using bootcamp 4 and windows 8 64 bit I am getting a error message upon startup. Any way to fix it?

Windows 8 is not supported on your computer.
http://support.apple.com/kb/HT5634

How can I sync my iPod Classic with iTunes 11.1.4 and Windows 7 64-bit?

After assistance from ‘b Noir’ (and losing--then finally regaining--my DVD/CD reader in the process), I finally installed the iTunes Version 11.1.4 update on my Windows 7 64-bit PC. So I am again able to import music from CDs, play music on my PC with iTunes, and burn CDs as I could do with previous iTunes versions. Then, however, I purchased some new music and tried to sync iTunes with my iPod Classic for the first time since the update to 11.1.4. So far, I have been spectacularly unsuccessful. Can anyone help me?
With previous iTunes versions, sync was automatic when I connected iPod to a USB port. Now when I connect iPod Classic to PC's USB port (I've tried two different ports), iPod’s screen says “Connecting” but iTunes doesn’t open. And while iPod is connected to the USB port, I can't open iTunes by right-clicking its icon and selecting “Open.” (ITunes, however, always opens OK if iPod is NOT connected). With the iPod connected to a PC's USB port, I opened Windows 7 “Devices and Printers.” Devices shown included both (a) the “Apple iPod USB Device” and (b) “Apple Mobile Device USB Driver.” I right-clicked each of these device icons in turn and selected “troubleshoot.” Both times, the report was “Troubleshooting couldn’t identify the problem.”
I am also unable to properly “eject” the iPod. I tried ejecting (a) from the Windows taskbar's Notification Area, (b) from Windows “Devices and Printers” and (c) by right clicking the iTunes icon and selecting “Eject.” Nothing worked, so I reluctantly pulled the cable out of the iPod without ejecting. That causes a yellow triangle with an exclamation point to appear in “Devices and Printers” for my PC—which disappears after shutting down and rebooting the PC.
If I start iTunes and THEN connect the iPod Classic to the USB port, iTunes does nothing and almost instantly freezes (shows as “not responding” in Windows Task Manager and I have to close it via Task Manager).
Suggestions, please, on what I need to do? My iPod Classic continues to work just fine, but I can't put any of my newly purchased music on it and I guess it will become an expensive paperweight if the battery happens to run down. If nothing else, is there an old version of iTunes I can download somewhere that likely will work with the iPod Classic and my PC setup? Thanks so much!

Hi turingtest2,
Thanks so much for your response--yes, I've seen the TS1363 document.
I was able to open iTunes, start the iPod Diagnostic Device Connectivity Test, and connect the iPod when prompted to do so. The only problem reported by the diagnostic program was "No iPod, iPhone or iPad found." So it does seem as if the TS1363 document should apply. But I have tried connecting the iPod after executing each of Steps 1, 2, 3, 5, 6, and 9 shown there and nothing has worked so far. Details follow:
--Went through the iPod Classic troubleshooting assistant--except I did not "reset" the iPod (because having all my "old" music available on the iPod has value to me).
--Restarted iPod Service.
--Restarted Apple Mobile Device Service.
--Verified that the Apple Mobile Device USB Driver is installed. There is no down arrow or question mark or other indication of problem with it.
--Tried two different USB ports (I assume that is what is meant by "change your iPod's drive letter"?).
--Temporarily disabled Norton Antivirus.
For some reason, there are 368 files and 60 folders in the Temp folder under my user name, and it looks like at least some are "read-only." Windows wouldn't let me delete or move the folder, even after I turned off Norton AntiVirus and closed the programs in the "Notification Area" that I could figure out how to close.
I'm very reluctant to get into messing with Config files or registry keys. And I have already tried uninstalling/reinstalling iTunes 11.4.1 so many times. I'm not sure what to do but am considering uninstalling all of the Apple products (again) and try installing an older version of iTunes. Or maybe I should try to install iTunes 11.4.1 on our Windows 8 laptop and see if the iPod will connect to that (although I really need to be able to sync to my desktop PC). Probably won't have time to do either for a few days--too many other things to do. But please let me know if there's something more that's relatively simple and low-risk I could try. Thanks again!

Dual boot WIndows 8.1 and Windows 7 (32 bits) from separated disks gives error 0XC0000359

Hi all,
I have two disks, each with a (OEM) installed OS on it, a Windows 8.1 (64 bits) and Windows 7.0 (32 bits). The later came from mine old computer that unfortunately died to soon. So I have two disks and two OS in an brand new machine (with UEFI BIOS etc.).
Installing a dual boot option was a pace of cake. However booting into Windows 7.0 gives following error:
"Windows failed to start. A recent hardware of software change might be the cause.
File:\Windows\system32\winload.exe.
Status: 0XC0000359
Info: the application or operating system could't be loaded because a required file is missing or contains errors".
There is lot discussions about installing two OS but that is not mine problem: both are already installed.
Also there is much rumour about the UEFI BIOS and support for older systems. In mine medion computer the Security Boot option is disabled (by the OEM), so booting from a old BIOS should be possible, must isn't.
Someone advised me to run the recovery disk (of Windows 7.0) and run Bootmgr. However the system refuses to boot from CD/DVD with the recovery disk of Windows 7.0 inserted, booting from the recovery disk of Windows 8.1. goes fine.
Removing the disk with Windows 8.1 installed on it and directly booting in Windows 7.0 fails too with the message: "Reboot and Select proper boot device or: Insert boot media in selected boot device and press key". Also in this case the system
refuses to boot from the Windows 7.0 recovery disk.
Could you please help me?

Hi,
To rebuilt boot loader, I suggest we can try following command when you enter Windows 8.1.
Run cmd as administrator and type following command:
BCDboot [Partition Letter with windows 7 installed]:\windows
Note: if you installed Windows 7 on Partition F, the command can be write as: BCDboot F:\windows.
Then, restart and boot into Windows 7.
What’s going on?
Kate Li
TechNet Community Support

ITunes and Windows 7 64 bit doesn't work together?

Running Windows 7 64 bit, iTunes is reporting it is latest and greatest, as is iPod touch. When I tried to move some songs I purchased today to my iPod via iTunes, my system crashed. Tried a few times and it kept crashing. It would transfer 1 maybe 2 songs then crash. I've not installed anything new, nor have I had this problem in the past and the crashes only occur when transferring music. Anyway, after the last crash I was checking my version on iPod touch and noticed it says I have only 2 gig left on space. Yet when I go to my Music I only have 3 songs. In addition, when I plug my ipod into my computer, iTunes sees all my old music from the iPod (listed under devices) AND it will play those songs. From my iPod those songs do not seem to exist but are still taking up space. I am in the process of restoring my iPod but I am curious if anybody has had the same issue, if so what was your resolution... as well as any suggestions. After restoring my iPod I had more issues. I installed iTunes to my XP machine, authorized it and hooked up my iPod and everything is syncing fine now. Seems to be just a problem with my Windows 7 machine. Any word as to when this is going to be fixed? My XP machine is not my preferred machine to keep my music on as it is my work PC.

I'm having a similar problem - my computer tells me that "one of the USB devices attached to this computer has malfunctioned and Windows does not recognize it". I'm also using Windows 7 64bit.

Ipod Touch and Windows 7 64 Bit - Itunes not recognizing

I have Windows 7 64 bit operating system. I have been struggling with getting my Itunes and Ipod touch to work together - somewhere an update or upgrade screwed things up.
Right now, I have Itunes 10 64 bit installed on my computer. When I plug in the Ipod touch to sync, I get a message in Itunes telling me that this Ipod requires the 64 bit Itunes and I need to remove and reinstall the 64 bit version of Itunes.
Needless to say, I've removed and reinstalled the 64 bit version 3 times. Still won't recognize my Ipod Touch.
HELP!
HP Desktop

Hey!!
Well ... After about 3 months of searching, going to the apple Genius bar... (seriously they wanted me to delete my stuff... I couldn't live without my books I downloaded from drinkmalk.com which is now defunct)
So.. I am running a Dell Studio 1557 Windows 7 (no SP installed yet), 64 Bit and I own a 3rd Generation Ipod Touch, 32 Gig and had many of the same problems. In my case... I was able to update software, but I couldn't sync music onto my ipod or transfer purchases I would get: Internal Device error, operation failed... etc etc.. .every sync error you can think of...
MAGIC FIX (For me.. and other users)
1. There is a known bug that says its a chipset issue (Just google Ipod sync chipset issues and realize you aren't alone)... Most likely you don't Have a PCI card slot to put a new usb thing on... so.. that is a no go...
2. SOLUTION (that worked for me) - UPDATE THE BIOS on your PC. If you go to your computer manufacturer's driver site... you can search for these updates. Chances are... you have the version that was installed on your computer that is out of date (its not one of those things that automatically updates). For the most part, you never really need to update it since it doesn't affect regular functioning... most people update it on the advice of a technician. Either way, I went to the Dell support site, looked up my laptop and found the install file.
WARNING BACK UP YOUR HARD DRIVE AHEAD OF TIME IF YOU DECIDE TO DO THIS!! ALSO, RESEARCH HOW TO MAKE A BIOS RECOVERY DISK IN THE CASE IT CRASHES.. BETTER YET, CONSULT YOUR LOCAL GEEK FOR SUPERVISION, IF FOR ANY REASON THE BIOS UPDATE FAILS AND IT DOES HAPPEN SINCE WE KNOW PC's are WONKY... YOU MAY RISK BRICKING YOUR COMPUTER... Just google "Bios Update Failure" to see the horror stories..
However.. that said and done.. I updated it ... made the mistakes above and was able to get my computer back by leaving the battery out for an hour, pressing the power button for 30 seconds and restarting ... after the failure scare... saved me 200 bucks from dell customer service
Good News: With the updated bios... SYNC WORKS PERFECTLY!! I can put music on, transfer stuff out... no errors!! =) JOY!

Sync outlook with Iphone and windows 7 64 bits

Hello,
I have a new computer (HP DV7 3080ef) with windows 7 64 bits, itunes 9.0.2.25 and one iphone 3Gs 3.1.2.
I succeed to import from XP 32 bits my library on my new pc, including my outlook (2007) file.
I can synchronize my computer with iphone, thanks to this forum for the help, but only my outlook data are not transferred from pc to iphone and iphone to pc...without any error message and during the sync process, on the header of itunes we can see the sync for calendar, contacts and notes...Other topics are syncronized without prob.
I am totally lost and would like to continue to use my iphone as I did with my old XP computer.
thanks for your help
Herve

ok I succeed. Maybe it can help somebody. solution is to recreate a new PST file, copy and paste all folders form old to new one (contacts, calendars, notes etc...). Then in outlook open Tools/options/data file, and select the new one as default file.
sync now works, I can use my precious with my laptop.
Hope this topic will help.
Greetings seasons to all.

Scanning problem with HP Laserjet 3050 and Windows 7 64-bit

I understand that to use the HP 3050 with Windows 7 64-bit I must use the Windows Fax and Scan software. However, if I try to scan using anything greater than a 200 dpi resolution, the document takes forever! Any workarounds?
Also, was doesn't pdf show up as a document type choice?

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at: http://h30499.www3.hp.com/t5/Printing-and-Digital-Imaging/ct-p/bsc-412
I hope this helps!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Vado vf0570 and windows 7-64 bit

Similar Messages

Maybe you are looking for