Vaja case for i4

I ordered an i4 case by Vaja last Friday and got two emails confirming the order. However, the charge has not shown up on my credit card. By contrast, the charge for my iPad showed up almost immediately.
Anyone place an order with Vaja for the i4 that knows how this is working now? I don't want to call their phone number because when I did that for the iPad my order was stopped until I resolved the order by email.

I've owned four Vaja cases over the years, and the leather craftsmanship is lovely, but my last, the nano classic case with "metal hook", has turned me off Vaja for life. I had a problem with the clip, a permanently attached, $5 add-on, which nearly caused the destruction of my iPod nano when it let go during its first use, and they totally blew me off. I paid nearly $70 including shipping, have bought four products from them over the past few years (at as much as $140+ a pop) and they told me in the most polite possible manner to screw myself.
Since they're in Argentina, one lacks options as a consumer and I'm spitting mad over it - aside from warning people that you're screwed if you have a problem with your expensive Vaja case. Lousy customer service is one of my biggest pet peeves. Caveat Emptor.

Similar Messages

  • Has anyone got their Vaja case for their iPhone 4 yet?

    I just got mine and am disappointed. I've bought probably a half-dozen of their cases for earlier iPhones and iPods and have liked them.
    This one doesn't fit well though. The part that folds over the screen doesn't fit tightly enough so that it is very easy to slide it off enough to one side or the other to the extent that it doesn't protect the screen.
    Too bad, waited almost 2 months and now this . . .

    I bought mine at the Vaja store in Paris while there on business. I got the sleeve-model. It is just gorgeous, if way too expensive. BUT within three days, it was too large and too loose and the iPhone 4 just slides right out while it is in your pocket. It's probably better for women who might place it in their purse in a pocket where it isn't going to slide around - but it is unsafe and unusable in a pants pocket. Sadly, I can't return it to Paris...I use it, but only when I can carry my iPhone in my inside suit breast pocket - otherwise, I use an older case for my pocket. Oh well.

  • Vaja Cases for the 5G - a warning!!!

    These cases are beautiful (& expensive) but I am extremely disappointed that when I put my pristine new SCRATCH-FREE 5G ipod in my new Vaja case, the case caused very bad surface scratches all down one edge and across the middle of the iPod front.
    The Vaja case claims to have a soft leather lining - it may do - but despite this, it still scratches the iPod (partly because the fit is very tight). When you pay a fortune for a case to protect the iPod from scratching, the last thing you expect is to have the case actually CAUSE the scratching.
    The case also traps a lot of dust particles and small hairs between the screen and the screen protector, which you can't get rid of without removing the iPod from the case and making the scratching worse.
    Guess who WON'T be making my next case!
    Nigel

    THANK YOU! I was so close to buying one of those off the site. You have saved me the 70$ to actually get more scratches. Good timing there.

  • Vaja case ivolution question

    Anyone have this case. I stumbled upon vaja's website and their ivolution looks pretty cool. I have some questions regarding that.
    1. Speaker, I'm concerned when making phone calls, that hearing the conversation will be more difficult, you're ear is now farther away from speaker. I googled the ivolution for the iPhone and saw one or two complaints
    2. Dust, will dust get inbetween the material and the phone? I have the incase slider now, and I take it off to clean the dust off by the seam of where the phone and the case meet
    3. Pocket use, I keep the phone in my pocket, does the form factor of the iVolution inhibit this, is it too bulky?
    Its a bit pricey, but its a sharp looking case, so if anyone has any thoughts or suggestions I would greatly appreciate the feedback.

    I have owned Vaja cases for other products but not the iPhone. I will tell you that any case adds bulk and you will notice it. This case looks thicker then other leather cases of the past - as thick as some hard shell plastic cases.
    I would think sliding it in and out of a pocket would be hard to do. You will definitely get dust around the edges and have to take it out to clean it - especially if you are slipping it into a pocket. Pockets seem to hold lint and dust.
    I don't think hearing would be a problem though. Vaja makes a fine case, but i decided on none. I have gotten tired of buying accessories for every new phone that add up to more then the phone.

  • Help with a New Case for the ZEN Touch 20

    Does anyone know of a case other than the one that came with the player?Something I can use,not like the pouch. It would be nice to change songs or even adjust the volume with out having to pull the player out all the time. If some one from Creative reads this....do you have any idea how much money you can make if you put out a case that gives end uesers access to all functions with out haveing to remove from the case.PLEASE HELP!!!!!

    Please Creative!! We need to have at least one case option that allows access to the screen and buttons at a reasonable price. Maybe strike a deal with a current case manufacturer to supply an option for all of the desperate users out here. I'm seriously looking at options to make one myself from materials I can find (actually came across a how-to on making a case out of a milk jug--please don't make us resort to such measures).
    By the way, the Vaja case is nice, but $80 (including shipping) is ridiculous IMO when you just need something to hold the player and provide access at the same time.
    My 2 cents.

  • The absolute best case for the BB Playbook!!!

    Ok, I've tried several cases for my Playbook---even a $160 Vaja, the Rolls Royce of cases. Absolutely beautiful Austrailian leather...however it had no cut outs for camera or headphones, therefore worthless. Then I found the Blurex case on Amazon.com. It's truly unbelievable. Real leather, 
    custom fit, 3 position stand, all cutouts, and it only cost $15!. Please trust me, this is an amazing case. In case u think this is just hype, check it out on Amazon. You'll find about 200 reviews, and almost all are 5 stars. I don't know how they sell a custom leather case for $15, but I bought 2! There is no other Playbook case that even comes close....not even the famous Vaja. Call me at 318.(personal info removed) if u need more info....Bill

    The best one is the RIM branded folding case

  • Case for Creative Zen Mi

    <SPAN class=postbody>Anyone looking for a case for their Zen Micro? I actually did a bit of searching on the web and found a Canon compact camera with the same dimensions as the Zen Micro. After some further searching I found these cases for it..
    <SPAN class=postbody><SPAN class=postbody>http://shop.store.yahoo.com/semsons-inc/cadiix30posd.html
    <SPAN class=postbody>My silver/black case arri'ved today and it fits perfectly. The fastener strap at the top actually goes over the headphone jack, protecting it from knocks (you still have access to the on/off button and usb socket either side of the fastener). It is very sturdy and well made and doesn't actually look like a camera case - it doesn't have Canon, Olympus, etc embossed on it (the metal badge on the front says IXY Digital - which is actually the Japanese model name for the camera). OK you don't have access to the touchpad whilst it is in the case, but if like me you stick it on random play or use long playlists then it isn't a problem. If you don't like this case, try searching for other cases for this type of camera. The site lists the model names for the UK, US and Japanese markets so do a bit of searching and you may find a case you like (I think this site had a couple of other alternati'ves as well). As Creative don't look like they will be bringing a case out in the near future its a good alternati've.

    Thanks for posting the information.
    Perhaps Vaja will bring out a case if they get badgered enough. It's a real shame Creative didn't bundle a case with the product as it keeps the player looking good, and really adds to its life.

  • Question About Vaja Cases

    I recently bought a neoprene case for my Zen Touch (not from Vaja). All well and good.
    At the same time, I also bought a rubberized skin for my Touch. Great.
    But the thing is, I can't fit the Zen Touch into my neoprene case while the skin is attached. Anyone know whether the Vaja cases would be able to fit the Zen Touch with the skin on it's
    Thanks. I hate to think that I spent $80 for these two items and can't use one without the other.

    All Vaja cases I've see have a 'snug' fit and my guess is that it wont fit while the silicone case is on.

  • Looking for somewhere to sell Video Ipod cases for WOMEN

    HI ALL !
    DO YOU KNOW WHERE CAN I BUY IPOD CASE FOR WOMEN ..FOR ME .. BECAUSE ALL I SEE BLACK COLOR CASES FOR MAN .. THANK YOU

    I don't get the male/female distinction frankly. To me it's just a quetion of what your style is, what material you'd prefer and whether you are after a case or a skin and waht you're going to be doing with the iPod - working out, being outside in the rain and so on.
    I have just bought a Vaja (vajacases.com) - as a Christmas gift from my parents and I'm really happy to have done so. Don't have it yet, but I'm sure it wont disappoint and at 50 pounds UK for everything incl p & p I don't even think it is that xpensive. Check the site out and you'll see that you can choose from quite a large range of colours.
    They're not as cheap as some, but that's the way I went 'cos it fits my needs.
    A

  • Cases for iTouch

    Does anyone know when they are coming out with the cases and armbands for the iPod touch? Can we use the iPhone cases? I hate not having a case for my iTouch! If anyone knows anything, please let me know!

    actually apple only offers a few cases. THey can be found in the store they are called "ipod socks" Many 3rd party manufacturers make the better cases for the ipods. Search these forums for many likes on forthcoming cases or some that already released now like marware, incase, vaja cases. these manufacturers simply have their own time frame of making cases contact them if you find a case your interested in.
    gff

  • I'm trying to change my phone case, i have the bumper that screws in if i goto the apple store will they unscrew the case for me?

    I have the bumper case that screws in so it doesn't fall apart, but i want to take it off. Will the apple store unscrew the case for me? or would i have to go to At&T to have them screw it off?

    Hey,
    I can confirm what xtremecaron has said, Apple will defo not remove the bumper for you. Best bet is to try different screwdrivers.

  • Trying to buy a protective case for MacBook Pro MD314B/A 13.3"

    Hi
    It's my first message on here so hope someone can help me.  I've been an Apple user for three years now and absolutely love all of their products and currently have a MacBook Air, iPad 2 and iPhone 5.
    I am trying to buy a protective cover/case for a friends son who is getting a MacBook Pro MD314B/A for his birthday but I'm having a lot of trouble trying to find one for that particular model, in all my searches (pretty exhaustive so far) all I seem to find are ones for the model A1278 none seem to be coming up for the MD314B/A model that I am wanting.
    I only have that to go by as that is all I have been given by his mum who's pretty computer and Apple savvy so I presume it's the correct information, I just can't understand why I can't find one as I it was a doddle when I found a cover for my MacBook Air.
    I know it is the 2011 model of MacBook Pro and really don't want to guess and order a wrong cover and disappoint someone on their birthday.
    I hope someone can throw some light on how to make sure I find the right one, obviously I can't check on the MacBook itself as it is all boxed up ready for the big day.
    Many thanks to you all

    Then you want to post in the respective forums, this one is devoted to Mac Pro (tower) not notebooks.
    Place that would be most likely to have accessories, upgrades too: http://www.macsales.com
    MacBook Pro 
    https://discussions.apple.com/community/notebooks/macbook_pro
    https://discussions.apple.com/community/mac_os
    http://www.apple.com/support/macbookpro

  • I want to buy a hard case for my macbook pro, but I don't know what year it is. When I use the serial number to try and find out, all it says is, "~VIN,MacBook Pro (15-inch Glossy)". When I type that into amazon for a case it gives me nothing!

    I want to buy a hard case for my macbook pro, but I don't know what year it is. When I use the serial number to try and find out, all it says is, "~VIN,MacBook Pro (15-inch Glossy)". When I type that into amazon for a case it gives me nothing!

    Hi T,
    Either of these will give you the info you seek:
    http://www.appleserialnumberinfo.com/Desktop/index.php
    http://www.chipmunk.nl/klantenservice/applemodel.html

  • How to relate dispute case for a AR document

    Hi Gurus,
    I have a requirement to change the reason code change date of dispute case(DIspute management) for the related AR document.
    Basically i am posting a AR document through BAPI. Now i wanted to take the last dunned date(MADAT) and find the related dispute case after that change the reason code change date using last dunned date.
    so my question how to relate relevent dispute case for the AR document?
    Thanks advance.
    Regards,
    Radhakrishna.

    Hi.............
                 Better and simplest way you can get it through a simple qury report. Create a query by joining two tables ODLN and OINV. OINV's docdate means the closing date of delivery challan.
    Regards,

  • How can I use the same event case for different controls dynamically

    OS: Linux 2.6.24-1-686 #1 SMP Sat Apr 19 00:37:55 UTC 2008 i686 GNU/Linux
    LabVIEW: Version 8.2
    I have a lot of (about 50) controls (numeric, boolean) on my front panel. If a "Value Change" event will be fired by any of them the same event case shall be executed. As I do not want to add all 50 controls to the same event case manually I am looking for a way to do it at run time. Additionally the VI is still under contruction, i.e. controls will be added and removed.
    Thanks for any help here.
    Regards,
    Johannes
    Solved!
    Go to Solution.

    Hi Johannes,
    collect all your control references (you can use the FP property for it) and create a user event. Connect this user event to your event structure. Now you have one event case for all your controls. See the attached picture.
    Mike
    Attachments:
    Unbenannt1.PNG ‏11 KB

Maybe you are looking for