Valid Feed wrong date and missing episod

Hi there! I've uploaded my update feed but iTunes doesn't catch it.
This is my feed, the validator said it's correct.
http://www.riccidj.com/podcast/podcast.xml
This is my podcast page
http://itunes.apple.com/it/podcast/jacopo-riccis-podcast/id513921187?l=en
The problem is that the dates are incorrect, in fact in the feed the first episode was published on 1 April but on podcast page it says 31 March but in iTunes it's correct. The second episode is shown in the podcast page as uploaded 30 April when in the feed is published 1 May and in iTunes it doesn't show. Can you help me?

The date difference is normally caused by being in a different timezone from the feed (which gives the date and time in CEST). It happens quite a lot and I wouldn't worry about it.
More seriously, your feed is not readable and cannot be subscribed to. You have numerous instances of ampersands (&) which can mess up a feed as they indicate the beginning of a code sequence which is never completed.
Oddly enough both episodes appear in the Store OK but cannot be subscribed to: evidently the Store's software can cope with this but iTunes itself cannot.
The best solution is to go through the feed changing every ampersand to the word 'and'.
Incidentally your category - 'music' - should have a capital M - 'Music' - to be correct.

Similar Messages

Wrong date and time in apple's mail client

All mails in my inbox are displaying date at 1429 a.c. Although through my web gmail interface, dates are correct the mac client is fault. I also tried with Thunderbird e-mail client and i also get wrong date and time. I checked the date and time preferences and everything is correct. Any suggestions?
Thanks

Hi,
In the Initial screen, please remove the tick for Display Header. It will not give any header details after execution. If you want to remove only date, you just check with your ABAPer, he can help by changing in program.
Thanks
Kishore Babu

Validation Script for Dates and General Event Questions

I have just started using Javascript, and am now using some objects and methods etc. that I did not even know about. It's progressing rather well, now I need to know some Livecycle Designer Basics that I can't seem to answer from my searches.
Here's what I am trying to do in English:
I want users to choose a date that they will miss at our Farmers Market. I have the date field on the form - works well.
I want to validate the entry for:
The date must be today or in the future
AND
The date must be before the closing date
AND
The date must be a Saturday
Here's some script I've written and placed in the Validation Event (I have actually written more for testing out that the results are coming out properly):
----- form1.#subform[0].Missdate::validate - (JavaScript, client) ----------------------------------
var entereddate = this.rawValue;// The date vendor will not attend as entered on the form
var dentry = new Date(entereddate.slice(0,4),[entereddate.slice(5,7)-1],entereddate.slice(8,10),0,0,0); // month starts at 0!
var closingdate = "October 04,2008" // closing date of the market
var today = Date();// today
(dentry.getDay() = 6);// and attempt to validate that the day = Saturday - nothing happens!
But now -
How do I actually validate this - my last statement seems to be ignored. How to I force a 'false' being returned? In Formcalc I simply put a camparison statement here and if it resulted in 'False' validation failed and if it resulted in 'True' it passed - What's the JS equivalent? Or are the variables giving me troubles?
Maybe I'm putting this in the wrong Event? If so which one should I place it in.
I want to force the user to enter the correct data - how do I code this - and put in a custom message refering to this. I may even get fancy and ask the user if the next Saturday is what they meant if they enter the incorrect one (this will be a real challenge!)
I think I'm lacking some basic knowledge here that other posts have assumed. Please refer me to any help pages as well - although I've done extensive searching on this and have not really found a good explanation of Validation - only specific pages that are not basic or general enough for my understanding. Thank!

In the validation script you have to allow the field's length to be 0, or
it will not be possible to clear it...

Photo with wrong date and time in icloud

i tried to upload some old photo on icloud photo via PC (windows 7)
however the time of photos shown is 15 hours faster than it was capture.
Do anyone can tell me how to solve it? i want to add back all my old photos from my iphone 4 to my new iphone

Hey Tom -
Apologize for the delayed reply here. Below is what was emailed to me from the P.M. (yes, Product Manager) for FCPX:
"We do try to go into the DV packets during capture and pull out the original date of the capture that’s found in the bitstream.
However—The DV format spec does not require the original date be in the bitstream, and if it’s not there—we have no choice but to use the current date.
So, I can see how what you are describing could happen. Some of the footage has the date, and some doesn’t. If it’s there—it will be used, but we’re sometimes seeing it go missing."

Tecra A10 - Wrong date and error messages

Hello, Toshiba Tecra A10, PTSB0A-002001 running XP pro,
I keep getting the wrong date & error messages on my laptop when I leave my laptop for long periods off without charging, so I guess that the Cmos battery is no good, so I am asking: what is cmos battery number and where can I purchase one?
Thanks

Hi joe75,
Before you exchange the CMOS battery: Leave the AC/DC adapter connected for at least 24 hours. During this procedure the CMOS battery will be recharged and the notebook should be able to store the correct date & time settings again.
Check this!!!

Wrong Dates and Sizes in List View in Finder (10.3.9)

Hi,
I'm in the Finder (Mac OS X 10.3.9) looking at a folder.
The folder is in List View mode.
Here's the problem:
Files that I edited yesterday are continuing to show up as modified "Today."
What's with that?
The Finder window won't update. (And I modified those files 12 hours ago.)
This has been going on for years.
Sometimes clicking on each file will trigger an update of the info, sometimes not.
Sometimes the dates are wrong, sometimes the sizes are wrong.
Is there a cure for this Mac OS bug?
-- JEBrown800
+J. E. Brown has been a software engineer for over 20 years.+

JEBrown800:
Welcome to Apple Discussions.
J. E. Brown has been a software engineer for over 20 years.
Your resume is a bit intimidating to non-technical types like me, and I suspect that whatever I suggest may have already been tried.
However, can you tell us what diagnostic tests or repairs you have attempted? e.g. Repair Disk in DU, Saft Book, Disk Warrior etc.
Good luck.
cornelius

Events in calendar have the wrong date and/or time

I have a 2nd generation iPod Touch and I recently synced my iCal to it using iTunes. However when I looked at the actual events listed in the calendar, after it was synced, some of them had been moved to different dates at different times. Is there a way to fix this?

Some where along the way, the settings are in the wrong time zone. Either the iPod or the server (computer).
My Ex-husband had the same complaint with our shared, online calendar on Yahoo. Whatever I entered on the iPod, came up on a different day and 2 hours off. He didn't have the computer mail account set up to eastern time zone.

Reversing A/P Invoice posted with wrong date and inventory cost adjustment

Here's the situation:
We had a PO dated 9/1/09 for items with a cost of $14.50, a Goods Receipt was entered 9/15/09 for the items with the same cost on the PO of $14.50. Somehow the order got lost in the mix and the AP invoice wasn't entered until today, with a posting date of 1/21/10 and the cost was corrected per the original vendor invoice to the right amount of $19.33. The invoice was actually dated 9/15/09. This resulted in hitting the vendor, purchases clearing and the inventory account (for the cost adjustment) in January 2010 when it should have occurred in September 2009.
The inventory itself has come and gone in the time between the GR and when the invoice was done with the incorrect date. Normally I would try to reverse the transaction with a Credit Memo and start over, however since the inventory side happened so long ago, I don't see any way of easily going backwards. I thought about doing service CM/invoice but what I am most concerned about is having the inventory valuation occur properly at the correct time. I'm not sure how to go about this.
Using SAP B1 2007A PL42 with moving average inventory.
Any thoughts would be appreciated.

Nicole,
I am afraid you may not have ability to do the adjustment based on historical date that long times ago. You know, the moving average has limited calculation based on current quantity and cost. There are no options to go backward especially new year is coming.
Thanks,
Gordon

Validation on start date and end date .

Hi every body ,
Hi have a problem on validation on the start date & end date problem.
I have taken two *<h:inputText>* & one *<t:commandLink>* controls.When I am clicking on the <t:commandLink> control I want to validate that end date should greater than start date .Could any body help me out from this problem .
Here is my code :
<rich:dataTable id="dataTable"
                           value="#{adminBacking.dataModel}"
                           var="item">
   <h:column>
     <f:facet name="header">
          <h:outputText value="Start Date" />
     </f:facet>
     <h:inputText size="11" id="startDate" value="#{item.startDate}" onclick="showCalendarControl(this);" />                      </h:column>
<h:column >
     <f:facet name="header">
          <h:outputText value="End Date" />
     </f:facet>
     <h:inputText size="11" id="endDate" value="#{item.endDate}" onclick="showCalendarControl(this);" />
</h:column>
<h:column>
     <f:facet name="header">
          <h:outputText value="Update Row" />
     </f:facet>
     <t:commandLink id="update" action="#{adminBacking.updateEvent}" value="Update" />
</h:column>
</rich:dataTable>**Here I am taking the date by a simple date picker in the start date & end date field.
Thanks ,
sb

You may find this example useful: [http://balusc.blogspot.com/2007/12/validator-for-multiple-fields.html].

RSS feeds on 11g and missing class file (SymmetricCrypto)

I installed the RSS Feeds component (Samples for Oracle Universal Content Management) and see that logs are being filled up with the below error..
Unable to create service handler. java.lang.NoClassDefFoundError: intradoc/conversion/SymmetricCrypto.
any idea which jar file has this class ?

Hi Bunty ,
Looks to be from How To Components . Here is the link :
https://bitbucket.org/jhult/howtocomponents/commits/c5314b711a5f1c18af277ed95e32312825c6ee58
https://bitbucket.org/jhult/howtocomponents/commits/c5314b711a5f1c18af277ed95e32312825c6ee58#chg-component/HowToComponen…
Hope this helps .
Thanks,
Srinath

Wrong date and year on calendar

Hi there, I did get all things working right. I finilly got my new Tungsten E2 working. But know for some reason every time I open the calendar it opens to 2005. I have go to year change in the this year and date before I see what I am looking for or to put in a new appt. I have look in all of the preferences, options. Nothing is working. I am taken a big dislike to this new PDA.
Post relates to: Tungsten E2

Finally got the date fixed, it was simple once I got palm support. I did a hard reset, then set the date but DID NOT click on TODAY at the bottom of the screen, the secret is to tap on the actual DAY on the calendar, NOT TODAY (after you set the year)
Post relates to: Tungsten E2

Two Tricks that helped me for fixing wrong thumbnails and missing images

I have about 15,000 photos in iPhoto (6.0.2) on an newish iMac. I have seen two oddities:
(1) Sometimes I get the wrong thumbnail.
(2) Sometime when I go to edit a photo, the photo never comes up I just get the spining "beach ball".
Fixes:
(1) Sometimes I get the wrong thumbnail. I have many duplicate file names. (Blame Canon (or the way I use the camera.)) The confused thumbnails are always from other images with the same file name. My fix is to rename the >title< (not filename) to something unique and then rebuild the thumbnails. The easiest way to rename the photos is use Photos>Batch Change (use set the title to text and append a number (I name them after the subject.)) You can rebuild the thumbnails by starting iPhoto with option and command keys down and selecting the rebuild thumbnail options.
(2) Sometime when I go to edit a photo, the photo never comes up I just get the spining "beach ball". Exporting the broken image seems to fix it. (You don't need to re-import. Just try exporting the broken image to somewhere (the desk top works) and see if that fixes the problem. (Then throw the exported images away. You don't need them.)
These forums have been a great help to me. I hope these tricks help someone else. Thanks especially to Lori and Old Toad for consistantly useful answers!
Miket
iPhoto 6.0.2 Mac OS X (10.4.5) 15000+ photos in Library

Are those negative images B/W photos? If so they may be Grayscale mode. Download the "Embed sRGB Profile" Automator application form Toad's Cellar and drop the original files for those photos onto it. If it's a grayscale mode file it will correct the situation. iPhoto 6 does not play well with Grayscale images.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

My apple email address shows wrong dates and emails are lost

Hello,
Today I noticed my emails shows funny dates like 11/19/1393AP and some of my emails are erased.
I think it happend after my flash was used on another computer, not sure it it is virus or malware.
I am In Tanzania now with no access to an apple store. Need help any suggestion
Thank you

Incorrect date or time displayed in various applications

My iphone 3gs has started showing the wrong time and date. All was fine until this afternoon when it changed. My apps have the right time and date. However the world clock is wrong. I have to turn off the automatic time setting to get the right time.

My iphone is showing the wrong time and date. All was well until sometime this afternoon when it changed... to Nov 5 (2 days prior to today), and about 9 hours and some minutes before the actual time. The world clock for my time zone shows the same wrong date and time. My calender shows the same wrong date and time. The phone can not find my time zone any more. The only fix I found was to turn off the automatic setting for time. What is happening? Ideas?

just sorted mine went to
settings-mail,contacts,calender-timezone support
then turned it off then on tapped time zone and typed london
this did sort mine

How to find out Which LineItem is having the wrong data

Hi All,
This is Idoc--File scenario
Iam sending the Idoc from R/3 and it may have several Line items and related data.
If One line item data is wrong also the Idoc will be errored Out in MONI,for this i used UDF in mapping to through the Exceptions. So i have to goto WE05 in R/3 and i have to check each and every line item for wrong data and then i will repost it.
the thing is how can i find out the Particular line item is caused for this Error.
REgards

Hi Sarvesh,
No, in MONI it will not take us to the correct Lineitem which is having the wrong data.
That is only the problem here.
Any Views.........
Regards

Valid Feed wrong date and missing episod

Similar Messages

Maybe you are looking for