Valid license code for activation that doesn't work HELP!

I had to reinstall CS3 back on to my computer after having to do a factory reset on the computer. I downloaded CS3 from Adobe.com since my CDs are in another state. After installation I go to enter my code for the programs and CS3 won't accept my VALID license code to activate the account. It worked perfectly fine before I had to reset my computer and it is currently installed on one other computer but I need it on this one! Please help! I talked with Adobe already and they said that since the product is outdated I needed to visit the forums to find an answer as to why my activation code won't work or if anyone can help with suggestions. Thank you!

Contact serial number support by web chat.
Mylenium

Similar Messages

  • How can I get Firefox version 5? I use an application for banking that doesn't work with version 6 yet.

    I am using an application for banking with Bank of America that doesn't work with Firefox 6 so I need to install Firefox 5 until Bank of America can update their app to work with Firefox 6. Can you tell me how to find the download for Firefox 5?
    Thank you

    I have an old iPhoto version and it still works with Mavericks, the version before yours, that is puzzling.

  • My redemption code for Adobe CC doesn't work

    Everytime I try to redeem the code it would say "Oops! This code has already been redeemed."

    If you have already used the code once then there is no need to use it again.  The first use of it should result in you acquiring an activation code for your subscription.
    Redemption Code Help
    http://helpx.adobe.com/x-productkb/global/redemption-code-help.html

  • HT3702 I got a bill for something that doesn't work, how do I dispute it?

    Ok, so I ordered pinger's textfree without ads hoping it would speed it up, but it doesn't work.  How do I dispute the charge? thanks!

    Click Support at the top of this page, then click the link under Contact Us.

  • Made new Apple ID and is still asking for old that is not working, help

    Please help me with my Apple ID. We have made a new one because we could not think of our old one and nothing was matching when we tried to regain it. So I cannot update or download anything as it still asks me for the old ID password, I don't know!!! Please help

    IIf you are trying to activate a phone and it is asking for a previous users Apple ID and password you have encountered the Activation Lock. This is a security feature to prevent lost or stolen iPhones from being activated By an unauthorized individual. You must contact the previous owner to either get the Apple ID and password or have them remove the phone from Find My iPhone. If you cannot contact the previous owner you will not be able to activate the phone.
    Find My iPhone Activation Lock: Removing a device from a previous owner’s account

  • Any Special transaction code for Activation of Work flow

    Hi all.
    Any Special transaction code for Activation and deactive of Work flow?
    which have we need to transport after WF (like task,method,rule)?
    To be reward all helpfull answers.
    Regards.
    Jay

    If I understand your question correctly, you want to know how to activate your workflow after transport ?
    Normally, the status of a workflow is included in your transport (if I'm not mistaken)
    So activate/deactivate in your dev-system and transport it..

  • I got a $50 iTunes gift card for Christmas that doesn't seem to work. Everytime I enter the code, a box pops up that "Code entered is not valid". Please help me?

    I got a $50 iTunes gift card for Christmas that doesn't seem to work. Everytime I enter the code, a box pops up that "Code entered is not valid". Please help me?

    iTunes Store: Invalid, inactive, or illegible codes

  • Can there be any activity apart from end state activity that doesn?t have a

    Can there be any activity apart from end state activity that doesn?t have an outgoing transition?
    For Example: there is a decision box with 3 possible outcomes based on the decision taken
    ? Condition 1: If the decision is to MODIFY, control needs to go to one of the previous activities
    ? Condition 2: If decision is to APPROVE, control needs to go to the end activity
    ? Condition 3: If decision is to REJECT, control needs to terminate the process

    don't the approve decision can have a transition to the end?
    Normally all activities have outgoing transitions, otherwise there is no flow.
    MAriano Benitez
    Join us at BEAParticipate, May 6-9 2007 | Atlanta, Georgia

  • Modify source code for Active-X viewer

    Requirement:
    Whenever an ActiveX viewer is selected, and a report link is clicked, the control goes to Url - CeVwr which is a servlet pointing to ReportSourceBridge.java residing in reportsourcebridge.jar. This class alongwith all other classes present in this jar pop up the parameter screen and process it to display report. Our requirement is to dynamically prepare this parameter screen, by localizing the strings - parameter prompts and their options - based on user's locale.
    Reason for workaround:
    BO does not provide any source code for Active-X viewer but they do for DHTML and Advanced DHTML viewer. So it was easy for us to implement our requirements in DHTML and AdvDHTML viewers but for Active-X viewer it is not the same story.
    Workaround:
    We identified a core class ParameterHTMLRenderResult.java present in rascore.jar, which is the one which genrates HTML for parameter prompt screen for all viewers, accept for the Java one. We extracted all parameters, their descriptions, their prompting options as well as current values and modified the html result to get a localised HTML result. We also passed user's locale in this class.
    Question: Is the source code for Active-X viewer available? Is it okay for us to modify Active-X viewer?

    Hi Chris,
    We do not provide the activex viewer code and do not support modifying it or any of our other code.
    Code for those two other viewers is available since they are html based viewers so that code is easily obtainable, but we do not support customers making changes to it.
    Jason

  • Can I get refund for in-app purchase that doesn't work?

    I bought a "no ads" in-app purchase for a game. At first the ads were removed. After a few software updates, the ads come back.
    When I asked for a refund, apple refers me to the developer's web site. When I go to the web site, there is no way to ask for support.
    Have you ever paid for an in-app purchase that doesn't work? What is the recourse?

    If you haven't gotten a refund from iTunes Store before, you might be able to. Get in contact with support to see:
    http://www.apple.com/emea/support/itunes/contact.html

  • Both Chrome and Safari interrupt online streaming to request/demand an update for a PC program that doesn't work on Macs. What is going on?

    Both Chrome and Safari interrupt online streaming to request/demand an update for a PC program that doesn't work on Macs. What is going on?

    The update alerts are fake, and are intended to dupe you into installing malware or disclosing private information so that your identity can be stolen.
    You might get the alerts when visiting a website that has been hacked. Don't visit the site again. If applicable, notify the site administrator of the problem, but don't send email to an unknown party.
    If you get the alerts when visiting more than one well-known website, such as Google, YouTube, or Facebook, then they're almost certainly the result of an attack on your router that has caused you to get false results from looking up the addresses of Internet servers. Requests sent to those sites are redirected to a server controlled by the attacker. It's possible, but less likely, that the DNS server used by your ISP has been attacked, but you should assume that the router is at fault until proven otherwise.
    The router's documentation should tell you how to reset it to the factory default state. Usually there's a pinhole switch somewhere in the back. It may be labeled "RESET." Insert the end of a straightened paper clip or a similar tool and press the button inside for perhaps 15 seconds, or as long as the instructions specify.
    After resetting the router, quit the web browser and relaunch it while holding down the shift key. From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
    and confirm. Do the equivalent if you use another browser. Open the Downloads folder and delete anything you don't recognize.
    Then go through the router's initial setup procedure. I can't be specific, because it's different for every model. The key points are these:
    1. Don't allow the router to be administered from the WAN (Internet) port, if it has that option. Most do.
    2. Set a strong password to protect the router's settings: at least ten random upper- and lower-case letters and digits. Don't use the default password or any other that could be guessed. Save the password in your keychain. Any password that you can remember is weak.
    3. If the router is wireless, or if you have a wireless access point on the network, use "WPA 2 Personal" security and set a different strong password to protect the network. If the router or access point doesn't support WPA 2, it's obsolete and must be replaced.
    During the time the router was compromised, you were redirected to bogus websites. If you ever connected to a secure site and got a warning from your browser that the identity of the server could not be verified, and you dismissed that warning in order to log in, assume that your credentials for the site have been stolen and that the attacker has control of the account. This warning also applies to all websites on which you saw the fake update alerts.
    Check the router manufacturer's website for a firmware update.
    If you downloaded and installed what you thought was a software update, ask for instructions.

  • HT1689 I purchased TV shows, I was billed for them, but they won't play on my Macbook because it says they are a certain HD that doesn't work - I am trying to find a way to return the shows or buy them in the right format

    I purchased TV shows, I was billed for them, but they won't play on my Macbook because it says they are a certain HD that doesn't work - I am trying to find a way to return the shows or buy them in the right format

    I am using MAC OSx 10.5.8 (9L31a) as my operation system.  The TV says "No signal.  Check connected device's power, cable connection and source selection."  Seems to me that that goes in hand with what the Samsung tech said about the Mac needing to be forces to use the external display.  But how do I do that?

  • Hi, I've used four different Groups when emailing for the past few years, and suddenly they have stopped working. I've tried creating new Groups but that doesn't work either. I haven't changed or done anything different and it is driving me mad......

    Hi, I've used four different Groups when emailing for the past few years, and suddenly they have stopped working. I've tried creating new Groups but that doesn't work either. I haven't changed or done anything different and it is driving me mad......can anyone help, please?!

    Thanks for that information!
    I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
    In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
    When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
    Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?!

  • I updated my iphone and when it came time for activation it won't work and keeps telling me to try again. At the top it says "No Service" and I have my SIM card in and a good WiFi connection and have connected it through iTunes but it says I have no SIM

    I updated my iphone and when it came time for activation it won't work and keeps telling me to try again. At the top it says "No Service" and I have my SIM card in and a good WiFi connection and have connected it through iTunes but it says I have no SIM card and need to disconnect and insert my SIM. I don't understand why this keeps happening and it's been going on for a wile now. I have tried over and over again to get this iPhone to work but nothig is happening. I've even gone on the website for support (apple.com/support) but cannot find anything that will help me with this situation. Can someone please help me find a solution to this problem? I have been without a phone and do not have money to buy another one and it is crucial for me to get it fixed. Thanks.

    wesb
    What computer operating system is involved in the Premiere Elements 11 and 13 issues? Same computer or different ones? Are you installing from purchased download installation files or from purchased installation disc? Does Premiere Elements 11 work completely on this computer whereas 13 will not?
    Let us go through the typical drill so as to take nothing for granted.
    1. Does the problem exist with or without the antivirus and firewall(s) disabled? Are you working with an individual home computer or in a
    school or company network?
    2. Are you running the program as Administrator and is there any "domain" account involved?
    3. Is your video card/graphics card up to date according to the web site of the manufacturer of the card?
    4. Do you have the latest version of QuickTime installed on the computer with Premiere Elements?
    Let us start by ruling in or out any of the above, and then we can decide what next.
    Any questions or need clarification, please do not hesitate to ask.
    Thank you.
    ATR

  • I can't seem to get my iMac (late 2009 model) into automatic sleep mode.  If I manually put it into sleep I don't have any issues.  I used to solve the issue by running "PleaseSleep" application but that doesn't work anymore since Lion.

    I can't seem to get my iMac (late 2009 model) into automatic sleep mode.  If I manually put it into sleep I don't have any issues.
    I used to solve the issue by running "PleaseSleep" application but that doesn't work anymore since Lion. I now want to fix the underlying problem.
    I'm not running any weird background processes and in my energy saver settings I've tagged "put the hard disk to sleep when possible:, "allow power button to put computer to sleep" and "automatically reduce brigthness". All pretty standard.
    Is there anyone who can give me some pointers ?

    Today I solved the same problem for my iMac running Snow Leopard. See https://discussions.apple.com/thread/3008791#15947706. The method may help you, too.
    For me it was the DynDNS Updater preventing my iMac from automatically entering sleep mode.
    To my knowledge the cause of this sleep problem can only be a peripheral device or a process. So I suggest to first unplug all peripherals and test whether that's the cause. If not, I suggest to terminate one process after another and to test automatic entering of sleep mode after each. Start with user processes; continue with system process if necessary.
    At least that's the way I found the offending process. Fortunately, I was able to change the configuration of that process to allow again automatic entering of sleep mode.
    Good luck!

Maybe you are looking for

  • How to Update the Date in PL/SQL using a variable?

    Hi, I am setting up a varchar of an update statement and would like to put a date variable for the value. It works when I just put SYSDATE in the statement, yet doesn't when I put the date variable. Gives me an ORA-0904 error. Thanks. DECLARE v_upd V

  • Maintaining report in background

    Hi experts,      i have a question related to fico development, as follows: i've three folders created on appl server. the first month data should be uploaded to the folder one, the second month data should be uploaded to the folder two, the third mo

  • Which ipad can read a PDF doc

    Which is the least expensive ipad that can read a PDF drivers manual  & other things to my severely dyslexic child?  Can any of the older refurbished ipads dot that? Thank you for any input!!

  • I dropped iphone in water...what do I do?

    I dropped my iphone in water...what do I do?

  • Import and export m3u playlists

    Subject says it all.  I've put some work into playlists in Winamp and I want to get them into Spotify. http://community.spotify.com/t5/Desktop-Windows/Feature-request-Import-M3U-playlists/m-p/196104#M17697 Thanks