Valid license PI 1.3 to 2.1/2.2

Hey guys!
I want to upgrade Prime 1.3 to 2.2
At first I go from 1.3.0.20 to 2.1.0.0.87. Make a backup and restore this on the running system 2.1, right?
Than I'll go to make a backup from 2.1 and restore it on 2.2, right?
Now my question: Do I need a new Prime Infrastructure license for version 2.x or can I use the license from the old version 1.3?

Valid subscription license is eligible to upgrade:
This version of Prime Infrastructure does not offer an in-place upgrade. To upgrade to the latest version, you must instead install this version of Prime Infrastructure as a virtual appliance on a fresh server, or order it pre-installed on a fresh physical appliance. You can then migrate your data from your old Prime Infrastructure installation to the new one, using an application backup from the previous installation.
If you are currently using one of the following versions of Prime Infrastructure, you can back up your existing data and then restore that data to a different server running Prime Infrastructure 2.2:
Cisco Prime Infrastructure 2.1.2 (with the UBF patch)
Cisco Prime Infrastructure 2.1.1 (with the UBF patch)
Cisco Prime Infrastructure 2.1.0.0.87
Cisco Prime Infrastructure 1.4.2
Cisco Prime Infrastructure 1.4.1
Cisco Prime Infrastructure 1.4.0.45
If you are using a version earlier than 1.4.0.45 or 2.1.0.0.87, you will need to upgrade your server to version 2.1.0.0.87 (or version 1.4.0.45) before taking the backup.
If you are running multiple versions of Prime Infrastructure from which you want to migrate data, see If You Are Running Multiple Prime Infrastructure Versions.
Remember that backups can only be restored to a new Prime Infrastructure server that is the same size or bigger than your previous server. See FIPS Mode Installation Option.
To back up your data from a previous supported version of Prime Infrastructure, follow these steps:
Step 1 If you have not already done so: Set up a remote backup repository for the Prime Infrastructure version you are currently running. For details, see Using Remote Backup Repositories in the Cisco Prime Infrastructure 2.2 Administrator Guide.
Step 2 Take an application backup of the Prime Infrastructure version you are currently running, and store the backup in the remote repository. For details, see Taking Application Backups in the Cisco Prime Infrastructure 2.2 Administrator Guide.
Step 3 Verify the integrity of the backup as explained in Validating Your Backup.
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/2-2/quickstart/guide/cpi_qsg.html#51878

Similar Messages

  • SAP license key error:  no valid license found:  cannot log into SAP GUI

    I deleted temp license from slicense on SM box, since I had already installed new digital license from SAP.  Well, later I tried to log in again and was locked out.  After some research, I found "sap license check failed" in the log files, java will not come up, and the hardware key has changed on me, so the valid license that was active before is not showing up now. 
    I applied for a new license with new hardware key and attempted to install from cmd prompt, using saplicense -install ifile=c:license.txt, but it gets an error.  I put a trace on it and appears it cannot read license file key.  I also tried to install another temp license, but that failed since no other previous valid license was found.  At this point, I'm thinking I need to manually insert the license key into the database, but not sure what table or exactly how.  SAP has not provided a solution yet.
    I believe the hardware key changed due to renaming the server (we took out a hyphen in name) and had also reinstalled afterwards.
    Has anyone else run into this issue?

    Yes, I wish it were that simple, but I cannot even bring up the logon screen.  SAP GUI returns a message, resource temporarily unavailable.  I looked in SAP MMC syslog and found several entries, "SAP-Basis System: No license found for hardware ID DLIC_HWIDKE"
    I tried to install temp license from cmd prompt, but it says refuses and says no old or expired license found.  I also tried to install the new license I applied for from SAP with new hardware key using saplicense -install ifile=license.txt and that failed as well. 
    For NW2004s, is it even possible to install a digital license using cmd prompt?
    Ben

  • Java remote desktop protocol from Windows server -no valid license available(0x102)

    This works from my iMac but not from my MacBook Pro.
    Our work offers a Java RDP. First I have to log on to the server which I can do. Then I could use a Citrix client function, if I wanted to figure out how, but the alternate Java interface used to work on both computers, but now only on one.
    Various websites have directed me to where the license is, saying to delete it, e.g. HD -> Users -> Shared -> etc. It isn't there or anywhere else that I can find (Library, Applications, Preferences, Application Support, both at the HD and User levels ... I have looked around).
    Some of the things I see on my screen are these:
    Terminal Services (RDP - Java) - one would click here to activate the password-protected software I need to run
    Terminal Services Java Client Error
    Connection Terminated
    No valid license available(0x102)
    The terminal server disconnected before licence negotiation completed.
    Possible cause: terminal server could not issue a licence.
    IT at work doesn't seem to know what to do. They have directed me to instructions about deleting a listing in the Windows Registry - clearly not directly applicable on a Mac.
    Anything obvious I could do about this?
    Thank you.
    Charles
    P.S. I can circumvent this with an SSH tunnel from my MacBook Pro to my iMac - but it slows things down and I think shouldn't be necessary.

    Thanks, Linc. I previously looked at the CoRD page and felt intimidated and then forgot about it. I've downloaded and run it now and my feelings were justified.
    I put in the settings I know, which are something like:
         https://xxx.xx.x.xxx/cgi-bin/welcome/{users_name}
    and it simply fails at that point.
    It works from IE or Opera (within Fusion, Vista), but not from Safari, and I haven't tried it with Firefox for Mac etc. because of complicated reasons ...
    So CoRD says:
         Couldn't connect to {name_I_used}
         The host name could not be resolved.
    So honestly, I've looked through the help files, read about "Connection Preferences" and looked at the "Connection Inspector" and it's all "computereze". It says I may use my user name and password or not - neither way works. When I go through IE (or Opera, from Vista), then there is a domain specified in a 3rd field, and it does't matter if I type that word in the Connection Inspector "Domain" field or not.
    I had an idea it would be complicated.
    Anyway, in the meantime, I'm managing through Fusion -> Windows_Vista. Actually, it's malfunctioning this morning as well, so this is just normal computer networking! Today, Java through IE wants to install MLWebCacheCleaner.cab... then I have to say "continue" to various security alerts 3 times ... and it's still not working, even after updating Java, rebooting Vista - so it might not be COrd at all. Will have to come back to it some other day ...
    Thanks again.
    Charles

  • Logon refused (valid license not installed)

    Hello,
    when we try to log on to SAP we are getting this error "Connection refused (valid license is not installed ".
    we didn't any refresh or upgrade.
    but the server was changed yesterday, you think this has an impact on the license?
    could you help me please

    Hi,
    Please hava a look into this step-by-step doc - [SAP LICENSE INSTALLATION|http://www.google.com/url?sa=t&source=web&cd=5&sqi=2&ved=0CDMQFjAE&url=http%3A%2F%2Fwww.fullinterview.com%2Fallpaperpresentations%2Fsap%2FSAP%2520LICENSE%2520INSTALLATION.doc&rct=j&q=how%20to%20change%20hardware%20ID%20and%20get%20new%20licence%20key%2Bsap&ei=J7sYTfDPCsL48Ab7i-2NDg&usg=AFQjCNHwIL5BagybgCTMbek_u6MsTlWmnQ&cad=rja]
    Regards,
    Sen

  • "Logon refused (valid license not installed)" after sap db restore ?

    Hi,
    I just restored my production db on test systm. It looks like things went ok - sap started with no errors. When I tried to logon I got this:
    "E: Logon refused (valid license not installed)"
    What steps should I take to resolve this ?
    thanks
    Vilius

    Hi,
    Using sap* user ? What is asterisk - it's just asterisk or it represents some unique number ? What password I shoud use
    it is just asterisk .SAP*  & DDIC are the default user name . Password is defined  at the time of installation .Password in client 000 Of PRD system & in client of your new system is same.U can install saplicense at OS level .First of all apply for new license at SAPmarket place & than install it in your system
    Karan
    Edited by: karan Singh on Aug 2, 2008 1:12 PM

  • Valid license code for activation that doesn't work HELP!

    I had to reinstall CS3 back on to my computer after having to do a factory reset on the computer. I downloaded CS3 from Adobe.com since my CDs are in another state. After installation I go to enter my code for the programs and CS3 won't accept my VALID license code to activate the account. It worked perfectly fine before I had to reset my computer and it is currently installed on one other computer but I need it on this one! Please help! I talked with Adobe already and they said that since the product is outdated I needed to visit the forums to find an answer as to why my activation code won't work or if anyone can help with suggestions. Thank you!

    Contact serial number support by web chat.
    Mylenium

  • Logon refused, valid license key not installed

    Hi all,
    Earlyer i posted one error on lisence key where i unable to login through a user. The error message comes like" logon refused( valid license not intalled)
    Infact while i was installing IDES 4.7 on OS 2003, after 9 to 10 hour i got an error message as here posted below...
    Changed working directory to C:\SAPinst DATABASE Instance.
    INFO 2012-06-16 02:50:25
    Changed working directory to C:\SAPinst DATABASE Instance.
    INFO 2012-06-16 02:50:26
    Creating file C:\SAPinst DATABASE Instance\brconnect.log.
    INFO 2012-06-16 02:50:26
    Changed working directory to C:\SAPinst DATABASE Instance.
    INFO 2012-06-16 02:50:28
    See 'D:\usr\sap\PRD\SYS\exe\run/brconnect -c -f crsyn -o SAPPRD' output in 'C:\SAPinst DATABASE Instance\brconnect.log'.
    INFO 2012-06-16 02:50:28
    'D:\usr\sap\PRD\SYS\exe\run/brconnect -c -f crsyn -o SAPPRD' returned with '0'.
    INFO 2012-06-16 02:50:28
    Creating file C:\SAPinst DATABASE Instance\brconnect.log.
    INFO 2012-06-16 02:50:28
    Changed working directory to C:\SAPinst DATABASE Instance.
    INFO 2012-06-16 03:46:17
    See 'D:\usr\sap\PRD\SYS\exe\run/brconnect -c -o summary -f stats -o SAPPRD' output in 'C:\SAPinst DATABASE Instance\brconnect.log'.
    ERROR 2012-06-16 03:46:17
    MOS-01012  PROBLEM: 'D:\usr\sap\PRD\SYS\exe\run/brconnect -c -o summary -f stats -o SAPPRD' returned with '5' which is not a defined as a success code.
    ERROR 2012-06-16 03:46:18
    FJS-00012  Error when executing script.
    when i Retry the installation it stopped automatically. The MMC started successfully. The only problem i got is license key is not valid through Tcode 'slicense'. The license expires status come with some invalid characters.
    I think the problem is in the installation.
      I am doing the installation on my laptop with an external harddisk. Is this the problem?? I tried the installation for two times but facing the same problem. please any one can suggest me how to overcome the problem.
    Thanks...

    after you've adjusted your date ("<b>2012</b>-06-16 02:50:25") you might be able to successfully end your installation...but somehow i do not think that sap will tolerate such "date pimping"
    GreetZ; AH

  • WebLogic console requires valid license?

    I've deployed WebLogic on three physical machines: two machines are clustered and running my application and the third is serving as my admin server (only running the WebLogic console).
    I've installed the two cluster nodes with valid WebLogic licenses; does the WebLogic admin server also require a license if it is only going to be running the console?

    Yes it does. Any weblogic server requires a valid license to start.
    Bill Jenniches <[email protected]> wrote:
    I've deployed WebLogic on three physical machines: two machines are clustered
    and running my application and the third is serving as my admin server
    (only running the WebLogic console).
    I've installed the two cluster nodes with valid WebLogic licenses; does
    the WebLogic admin server also require a license if it is only going
    to be running the console?

  • Warnngs of trial version expiration for a valid license

    I recently downloaded and reinstalled LR on my Mac as part of an attempts to deal with a bug.  The issue was later resolved, but now I am getting these warning emails from Adobe that my trial version is about to expire and I better hurry up and buy.  When I go into Help/Registration it shows my license key with a big green check mark beside it.  Is this simply misguided advertising, or something I should worry about? 

    I would ignore the emails and only be concerned if the program itself reports that your license is going to expire (which should not happen if you have already entered a valid license). I am sure their email automator is only aware of the date you downloaded the trial and not that you have a valid license

  • Try to logon onto Web Intelligence-Getting error of "no valid license"

    I'm currently using the BusinessObjects Enterprise Professional Version and everytime I try to logon to Web Intelligence I get this "no valid license" error, any suggestions.

    Hi all,
    we faced the similar problem.
    we have BO 3.0 edge. xcelsius 2008 sp1f3 was installed on both client and server.
    i installed xcelsius 2008 sp3 on both client and server. first, everything was ok. but when i restarted the server and i got web intelligence license error.
    i tried to change registiry with PRODUCT_ENABLE key, no worked.
    i looked SAP notes 1275367, but our registry key was correct according to this note.
    finally, i uninstalled xcelsius 2008 sp3 and re-installed xcelsius 2008 sp1 with our "product key" (sp3 does not want product key) .
    then everything is ok.
    i checked that, keycode.dll registry key is different from SAP notes 1275367.
    worked version is "D:\Program Files\Business Objects\Xcelsius\keydecoder.dll"
    i hope this can help you
    kind regards.

  • No valid license found after IOS upgrade on C3750x switch

    HI,
    Two switches below are working fine as a stack with IOS c3750e-universalk9-mz.122-55.SE5.bin & ipbase license.
    Switch#1 (Master, WS-C3750X-24P-S)
    Switch#2 (Member, WS-C3750X-24P-S)
    After IOS Upgrade to c3750e-universalk9-mz.150-2.SE7.bin, The stack was broken. Switch#2 didn’t recognise valid ipbase license with new IOS and came up with lanbase license instead. Therefore stack cannot be composed due to license mismatch between Switch#1 (ipbase) and switch#2(lanbase).
    I’m wondering why Switch#2 didn’t recognise ipbase license with new IOS even though IPASE is running well with previous IOS.
    Here is excerpt from “show version” with 15.x image on Switch#2.
    License Level: lanbase
    License Type: Default. No valid license found.
    Next reload license Level: lanbase
    Here is excerpt from “show version” with 12.x image on Switch Stack.
    License Level: ipbase
    License Type: Permanent
    Next reload license Level: ipbase
    Thanks
    Jeong

    Thanks guys,
    I have fixed the issue by configuring  'license boot level ipbase' on the member switch#2. The switch recognised IPBASE license well and joined the stack successfully.

  • Not a valid/licensed version

    Hello: I recently reinstalled windows on my management
    workstation and reinstalled C1 as I have dozens of times in
    the past. When I run C1 and attempt to open ZfS Sites I get
    this dialog telling me "This is not a valid licensed or
    evaluation version".
    How do I fix this???? Thanks, Chris.

    On Wed, 11 Apr 2007 19:08:38 GMT, cmaupin wrote:
    > Any fixes for this yet? I'm seeing the same issue when in ConsoleOne
    > and clicking on an app object. Strange thing is only one user is
    > having this issue.
    so do you have a c: drive or full rights to C:?
    Marcus Breiden
    If you are asked to email me information please change -- to - in my e-mail
    address.
    The content of this mail is my private and personal opinion.
    http://www.edu-magic.net

  • No valid license for the book

    I have just bought a Hanvon ereader and it has adobe digital editions. I have authorised it as a device on my adobe digital editions on my computer and correctly transferred the book to my device but when I try to open it I get the message "no valid license for the book". Can anyone help me as this is the 2nd ereader I have tried with adobe digital editions and I haven't yet been able to read a library book on either one. My ereader is on the adobe supported devices list, it is a Hangwang Pty Ltd Wise reader N520.

    I want to add to this, after searching and reading many posts on this forum I have now checked the item info for the epub books I downloaded from my regional library and they say the followiing:
    Reading allowed on any device until 31/3/2014
    Copying not allowed
    This is frustrating as our regional library recommends download with Adobe Digital editions for reading books on any ereader device. Can anyone tell me how I can download direct to my ereader so I am not trying to copy from ADE on my pc to my ereader. I am desperate to get this sorted out.

  • Simulation engine failed to start: A valid license was not found for simulation

    Hi,
    I'd like to run xsim by clicking "Run Simulation" in Vivado 2015.2 . However, in the Tcl console I see this error:
    INFO: [Common 17-186] '/home/rob/xilinx-projects/bright_proj/bright_proj.sim/sim_1/behav/xsim.dir/ProgNetwork_behav/webtalk/usage_statistics_ext_xsim.xml' has been successfully sent to Xilinx on Mon Jul 13 16:01:02 2015. For additional details about this file, please refer to the WebTalk help file at /home/rob/sw/xilinx/xilinx-build/Vivado/2015.2/doc/webtalk_introduction.html.
    INFO: [Common 17-206] Exiting Webtalk at Mon Jul 13 16:01:02 2015...
    run_program: Time (s): cpu = 00:00:08 ; elapsed = 00:00:10 . Memory (MB): peak = 6669.582 ; gain = 0.000 ; free physical = 763 ; free virtual = 18006
    INFO: [USF-XSim-4] XSim::Simulate design
    INFO: [USF-XSim-61] Executing 'SIMULATE' step in '/home/rob/xilinx-projects/bright_proj/bright_proj.sim/sim_1/behav'
    INFO: [USF-XSim-98] *** Running xsim
    with args "ProgNetwork_behav -key {Behavioral:sim_1:Functional:ProgNetwork} -tclbatch {ProgNetwork.tcl} -log {simulate.log}"
    INFO: [USF-XSim-8] Loading simulator feature
    Vivado Simulator 2015.2
    ERROR: [Simtcl 6-50] Simulation engine failed to start: A valid license was not found for simulation. Please run the Vivado License Manager for assistance in determining which features and devices are licensed for your system.
    Please see the Tcl Console or the Messages for details.
    However, if you look at the attached image, you'll see that my installed licenses include the license name "Simulation".
    Why is Vivado complaining about "Simulation engine failed to start: A valid license was not found for simulation" ?
    Thank you,
    Rob
     

    Hi Rob,
    The reason for the license error is: Hostid mismatch. i.e., the hostid of the machine is different from the hostid in the license file.
    I observe that the license file is generated with hostid: 52540019ee7e. You can cross check your hostid of the machine by running the command: lmutil lmhostid
    You can rehost the license file using the steps mentioned in the section "Rehost or change the license server host for a license key file" in the following user guide: http://www.xilinx.com/support/documentation/sw_manuals/xilinx14_5/irn.pdf
    Thanks,
    Vinay

  • FB4 Eclipse plugin referencing to trial key and not to valid license key

    After uninstalling trial version, I installed Flash Builder 4 Standalone version with new serial key and that works fine, but after that I installed Flash Builder 4 Eclipse plugin and that didnt work. I checked the asm3.log file and it had message "SLCoreService: Query license: type = 1, duration = 60 days, remaining = expired.".
    Why FB4 Eclipse plugin reference to trial key and not valid key?
    Flash Builder 4 Standalone license key does not work for Flash Builder 4 Eclipse plugin? Do I need new license for FB4 Eclipse plugin?
    Why it work for Flash Builder 4 Standalone version and not for Flash Builder 4 Eclipse plugin?

    The same license key will work for both FB4 Standalone and FB4 Plug-in.
    In order to get out of trial mode for FB4 Plug-in, launch the bundled copy of eclipse, and switch to the Flash perspective. This should trigger the Activation dialog, where you can enter your SN.
    -Chris

Maybe you are looking for

  • Converting a Color Cad file into a Black and White .pdf

    My company recently bought me Adobe Acrobat XI-Professional as an upgrade from Adobe Acrobat 9-Standard. As such, one of the tasks assigned to me was to take color CAD drawings (.DWG extension) created in AutoCAD 12 and then convert them into black-a

  • Aperture 3.0.2 quits unexpectedly when trying to update previews

    After upgrade to Aperture 3.0.2 it began quit unexpectedly when trying to update previews&When i stop updating it works fine. But then i found out that it cant modify any object without quitting. Any type of modification leads to A3 to quit with erro

  • Invalid user name and password when adding a shared printer from vista

    I have the following hardware in our house: 1. A Vista Ultimate 2. A Power Book G4 3. A Netgear RangeMax router 4. A Canon IP2200 The printer is attached to the vista PC by USB. That PC is attached by ehternet to the router. The mac is networked to t

  • Exchange hotmail will not let me sign in I know my password

    EExchange Hotmail will not let me sign in even tho I know my password I had changed password for hotmail on laptop

  • AcceptClientCertWithoutSSL

    Hi, Does anyone have experience of using the AcceptClientCertWithoutSSL parameter in the portal? We currently have an HTTPS portal, authenticating with Client Certificates. We would like to put Web Dispatcher in front of the portal and use it to term