Validate Technical Information from Flat File header record
Hi Experts,
I would like to know the best way to validate data from a flat file where the layout has a header containing the number of records sent and the total amount distributed along the file content.
Please, notice we have a commom layout where the first 3 fields are only used by header record (record type = 00)
For example:
RECORD TYPE NUMBER OF RECORDS TOTAL AMOUNT COST CENTER AMOUNT
00 3 250,00
01 1000000 100,00
01 2000000 100,00
01 1000000 50,00
So, let´s suppose I received the file content above and I have recorded all 4 records in a first DSO. The next step I would like to load to a different DSO the records where RECORD TYPE = 01 (business) data. That´s OK.
The header record where RECORD TYPE = 00 (technical data) has to be uploded to a log DSO validating the total amount (250,00) and number of records (3) sent in the file. This line will be further exported as a validation information.
Well, any suggestions how to validate the data as described above?
Any information will be fully appreciated.
Thanks.
Fábio
Edited by: Fabio Chaves on Jan 30, 2010 9:30 PM
Hi Fabio,
You seem to compare the first record of file or header record with the collated values of rest of the records in the flat file.
Simple way would be to do validation separate and load the file...
create a function module to read a file...
compare the first record with the collated values in the rest of file.
If the file seems to be okay,then loading is your choice...
rakesh
Similar Messages
-
Creating BOM using BDC :How to display no of records from flat file under
Hi,
How to display no of records from flat file under one (Alternative BOM) vertically.
When i execute, the records are replacing one by one.
Here my coding:
report ZBOM1
no standard page heading line-size 255.
*include bdcrecx1.
DATA: BEGIN OF bdc OCCURS 0,
matnr(18),
werks(4),
stlan(1),
END OF BDC.
DATA: BEGIN OF BDC1 OCCURS 0,
idnrk(18),
MENGE(18),
MEINS(3),
postp(1),
END OF bdc1.
DATA: BEGIN OF BDCDATA OCCURS 0,
matnr(18),
werks(4),
stlan(1),
idnrk(18),
MENGE(18),
MEINS(3),
postp(1),
posnr(4),
END OF BDCDATA.
data: ibdcdata type standard table of bdcdata WITH HEADER LINE.
*start-of-selection.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = 'C:\Documents and Settings\dilipkumar.b\Desktop\soft.txt'
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = ','
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
VIRUS_SCAN_PROFILE =
NO_AUTH_CHECK = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
DATA_TAB = BDCDATA
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*perform open_group.
loop at bdcdata.
perform bdc_dynpro using 'SAPLCSDI' '0100'.
perform bdc_field using 'BDC_CURSOR'
'RC29N-STLAN'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RC29N-MATNR'
'SOFTDRINKS'.
perform bdc_field using 'RC29N-WERKS'
'WIND'.
perform bdc_field using 'RC29N-STLAN'
'1'.
perform bdc_field using 'RC29N-DATUV'
'16.09.2008'.
perform bdc_dynpro using 'SAPLCSDI' '0110'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RC29K-BMENG'
'1'.
perform bdc_field using 'RC29K-STLST'
'1'.
perform bdc_field using 'BDC_CURSOR'
'RC29K-EXSTL'.
perform bdc_dynpro using 'SAPLCSDI' '0111'.
perform bdc_field using 'BDC_CURSOR'
'RC29K-LABOR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPLCSDI' '0140'.
perform bdc_field using 'BDC_CURSOR'
'RC29P-POSTP(01)'.
perform bdc_field using 'BDC_OKCODE'
'=FCBU'.
perform bdc_field using 'RC29P-IDNRK(01)'
BDCDATA-IDNRK.
perform bdc_field using 'RC29P-MENGE(01)'
BDCDATA-MENGE.
perform bdc_field using 'RC29P-MEINS(01)'
BDCDATA-MEINS.
perform bdc_field using 'RC29P-POSTP(01)'
BDCDATA-POSTP.
perform bdc_dynpro using 'SAPLCSDI' '0130'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'RC29P-POSNR'.
perform bdc_field using 'RC29P-POSNR'
BDCDATA-POSNR. "'0010'.
perform bdc_field using 'RC29P-IDNRK'
BDCDATA-IDNRK. "'15'.
perform bdc_field using 'RC29P-MENGE'
BDCDATA-MENGE. "'1'.
perform bdc_field using 'RC29P-MEINS'
BDCDATA-MEINS. "'ml'.
perform bdc_dynpro using 'SAPLCSDI' '0131'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'RC29P-POTX1'.
perform bdc_field using 'RC29P-SANKA'
'X'.
*perform bdc_transaction using 'CS01'.
*perform close_group.
CALL TRANSACTION 'CS01' USING IBDCDATA MODE 'A' UPDATE 'S'.
REFRESH IBDCDATA.
endloop.
Start new screen *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR iBDCDATA.
iBDCDATA-PROGRAM = PROGRAM.
iBDCDATA-DYNPRO = DYNPRO.
iBDCDATA-DYNBEGIN = 'X'.
APPEND ibDCDATA .
ENDFORM.
Insert field *
FORM BDC_FIELD USING FNAM FVAL.
IF FVAL <> NODATA.
CLEAR iBDCDATA.
iBDCDATA-FNAM = FNAM.
iBDCDATA-FVAL = FVAL.
APPEND iBDCDATA .
ENDIF.
ENDFORM.Hi,
the BDCDATA structure must be fnam, fval,dynbegin,dynpro,program.
You have to declare like this and pass this in your CALL TRANSACTION statement.
Please give some other table name for BDCDATA you declared for and also for IBDCDATA. -
Data loading from flat file to cube using bw3.5
Hi Experts,
Kindly give me the detailed steps with screens about Data loading from flat file to cube using bw3.5
...............PleaseHi ,
Procedure
You are in the Data Warehousing Workbench in the DataSource tree.
1. Select the application components in which you want to create the DataSource and choose Create DataSource.
2. On the next screen, enter a technical name for the DataSource, select the type of DataSource and choose Copy.
The DataSource maintenance screen appears.
3. Go to the General tab page.
a. Enter descriptions for the DataSource (short, medium, long).
b. As required, specify whether the DataSource builds an initial non-cumulative and can return duplicate data records within a request.
c. Specify whether you want to generate the PSA for the DataSource in the character format. If the PSA is not typed it is not generated in a typed structure but is generated with character-like fields of type CHAR only.
Use this option if conversion during loading causes problems, for example, because there is no appropriate conversion routine, or if the source cannot guarantee that data is loaded with the correct data type.
In this case, after you have activated the DataSource you can load data into the PSA and correct it there.
4. Go to the Extraction tab page.
a. Define the delta process for the DataSource.
b. Specify whether you want the DataSource to support direct access to data.
c. Real-time data acquisition is not supported for data transfer from files.
d. Select the adapter for the data transfer. You can load text files or binary files from your local work station or from the application server.
Text-type files only contain characters that can be displayed and read as text. CSV and ASCII files are examples of text files. For CSV files you have to specify a character that separates the individual field values. In BI, you have to specify this separator character and an escape character which specifies this character as a component of the value if required. After specifying these characters, you have to use them in the file. ASCII files contain data in a specified length. The defined field length in the file must be the same as the assigned field in BI.
Binary files contain data in the form of Bytes. A file of this type can contain any type of Byte value, including Bytes that cannot be displayed or read as text. In this case, the field values in the file have to be the same as the internal format of the assigned field in BI.
Choose Properties if you want to display the general adapter properties.
e. Select the path to the file that you want to load or enter the name of the file directly, for example C:/Daten/US/Kosten97.csv.
You can also create a routine that determines the name of your file. If you do not create a routine to determine the name of the file, the system reads the file name directly from the File Name field.
f. Depending on the adapter and the file to be loaded, make further settings.
■ For binary files:
Specify the character record settings for the data that you want to transfer.
■ Text-type files:
Specify how many rows in your file are header rows and can therefore be ignored when the data is transferred.
Specify the character record settings for the data that you want to transfer.
For ASCII files:
If you are loading data from an ASCII file, the data is requested with a fixed data record length.
For CSV files:
If you are loading data from an Excel CSV file, specify the data separator and the escape character.
Specify the separator that your file uses to divide the fields in the Data Separator field.
If the data separator character is a part of the value, the file indicates this by enclosing the value in particular start and end characters. Enter these start and end characters in the Escape Charactersfield.
You chose the; character as the data separator. However, your file contains the value 12;45 for a field. If you set u201C as the escape character, the value in the file must be u201C12;45u201D so that 12;45 is loaded into BI. The complete value that you want to transfer has to be enclosed by the escape characters.
If the escape characters do not enclose the value but are used within the value, the system interprets the escape characters as a normal part of the value. If you have specified u201C as the escape character, the value 12u201D45 is transferred as 12u201D45 and 12u201D45u201D is transferred as 12u201D45u201D.
In a text editor (for example, Notepad) check the data separator and the escape character currently being used in the file. These depend on the country version of the file you used.
Note that if you do not specify an escape character, the space character is interpreted as the escape character. We recommend that you use a different character as the escape character.
If you select the Hex indicator, you can specify the data separator and the escape character in hexadecimal format. When you enter a character for the data separator and the escape character, these are displayed as hexadecimal code after the entries have been checked. A two character entry for a data separator or an escape sign is always interpreted as a hexadecimal entry.
g. Make the settings for the number format (thousand separator and character used to represent a decimal point), as required.
h. Make the settings for currency conversion, as required.
i. Make any further settings that are dependent on your selection, as required.
5. Go to the Proposal tab page.
This tab page is only relevant for CSV files. For files in different formats, define the field list on the Fields tab page.
Here you create a proposal for the field list of the DataSource based on the sample data from your CSV file.
a. Specify the number of data records that you want to load and choose Upload Sample Data.
The data is displayed in the upper area of the tab page in the format of your file.
The system displays the proposal for the field list in the lower area of the tab page.
b. In the table of proposed fields, use Copy to Field List to select the fields you want to copy to the field list of the DataSource. All fields are selected by default.
6. Go to the Fields tab page.
Here you edit the fields that you transferred to the field list of the DataSource from the Proposal tab page. If you did not transfer the field list from a proposal, you can define the fields of the DataSource here.
a. To define a field, choose Insert Row and specify a field name.
b. Under Transfer, specify the decision-relevant DataSource fields that you want to be available for extraction and transferred to BI.
c. Instead of generating a proposal for the field list, you can enter InfoObjects to define the fields of the DataSource. Under Template InfoObject, specify InfoObjects for the fields in BI. This allows you to transfer the technical properties of the InfoObjects into the DataSource field.
Entering InfoObjects here does not equate to assigning them to DataSource fields. Assignments are made in the transformation. When you define the transformation, the system proposes the InfoObjects you entered here as InfoObjects that you might want to assign to a field.
d. Change the data type of the field if required.
e. Specify the key fields of the DataSource.
These fields are generated as a secondary index in the PSA. This is important in ensuring good performance for data transfer process selections, in particular with semantic grouping.
f. Specify whether lowercase is supported.
g. Specify whether the source provides the data in the internal or external format.
h. If you choose the external format, ensure that the output length of the field (external length) is correct. Change the entries, as required.
i. If required, specify a conversion routine that converts data from an external format into an internal format.
j. Select the fields that you want to be able to set selection criteria for when scheduling a data request using an InfoPackage. Data for this type of field is transferred in accordance with the selection criteria specified in the InfoPackage.
k. Choose the selection options (such as EQ, BT) that you want to be available for selection in the InfoPackage.
l. Under Field Type, specify whether the data to be selected is language-dependent or time-dependent, as required.
7. Check, save and activate the DataSource.
8. Go to the Preview tab page.
If you select Read Preview Data, the number of data records you specified in your field selection is displayed in a preview.
This function allows you to check whether the data formats and data are correct.
For More Info: http://help.sap.com/saphelp_nw70/helpdata/EN/43/01ed2fe3811a77e10000000a422035/content.htm -
Error occurred in the data uploading from Flat File in BPC NW
Hi,
I am doing Migration project from BPC MS to NW.
In this i am loading data from flat file to BPC NW. One error occured in this process that is Record Duplication.
Total 17000 records in that 7000 recards rejected by the reason of duplication.
The Information about Package Log
/CPMB/MODIFY completed in 0 seconds
/CPMB/CONVERT completed in 2 seconds
/CPMB/LOAD completed in 7 seconds
/CPMB/CLEAR completed in 0 seconds
[Selection]
FILE= DATAMANAGER\DATAFILES\Aprilmayjun_2011_Budget_V1.CSV
TRANSFORMATION= DATAMANAGER\TRANSFORMATIONFILES\ZAPRMAYJUN_2011BUDGET.xls
CLEARDATA= No
RUNLOGIC= Yes
CHECKLCK= No
[Messages]
Task name CONVERT:
No 1 Round:
Record count: 17064
Accept count: 17064
Reject count: 0
Skip count: 0
Task name LOAD:
Reject count: 7230
Submit count: 9834
Application: CorpBudget Package status: WARNING
Could you help me in this at the earliest.
Thanks and Regards
KrishnaHi,
You cannot send the duplicated with the standard import package. You need to create or add a new package and link to /CPMB/APPEND process chain and do the import. This would consider the duplicate entries also. It looks like you need somehow load all the records including the duplicate ones.
So on excel go to Manage Data -> Maintain Data management -> organize package list and add a new package and link to the standard BPC process chain /CPMB/APPEND.
Thanks,
Sreeni -
Tracking history while loading from flat file
Dear Experts
I have a scenario where in have to load data from flat file in regular intervals and also want to track the changes made to the data.
the data will be like this and it keep on changes and the key is P1,A1,C1.
DAY 1---P1,A1,C1,100,120,100
DAY 2-- P1,A1,C1,125,123,190
DAY 3-- P1, A1, C1, 134,111,135
DAY 4-- P1,A1,C1,888,234,129
I am planing to load data into an ODS and then to infocube for reporting what will be the result and how to track history like if i want to see what was the data on Day1 and also current data for P1,A1,C1.
Just to mention as i am loading from flat file i am not mapping RECORDMODE in ODS from flat file..
Thanks and regards
Neel
Message was edited by:
Neel KamalHi
You don't mention your BI release level, so I will assume you are on the current release, SAP NetWeaver BI 2004s.
Consider loading to a write-optimized DataStore object, to strore the data. That way, you automatically will have a unqiue technical key for each record and it will be kept for historical purposes. In addition, load to a standard DataStore object which will track the changes in the change log. Then, load the cube from the change log (will avoid your summarization concern), as the changes will be updates (after images) in the standard DataStore Object.
Thanks for any points you choose to assign
Best Regards -
Ron Silberstein
SAP -
How to load Material from Flat File and convert to SAP Format
Hi
I am loading 0Material values from Flat File for mapping purpose. The format of Material in Flat File is "7704132". Within the system, i need to compare the value with 0Material values from the incoming data and update corresponding 0Material in records. for this purpose, I created dummy materials taking 0Material as template and trying to load data. I am getting invalid error- Version '7704132' is not valid RSDMD No194. Can anyone please let me know how to over come this issue. Should I include any routine in the data source or rules level. I am in BI 7.0.
Thanks.Hi,
Use the FM CONVERSION_EXIT_ALPHA_INPUT to convert the value into Internal format .Use this FM in the Transformations (field mapping).
Search the forum with CONVERSION_EXIT_ALPHA_INPUT for more information on this.
Regards,
Anil Kumar Sharma .P -
How to upload schedule line from flat files to sap file
dear all,
i want to upload the schedule lines from flat files to sap schedulle lines
but the flat files have 15 schedule lines and the data is as per date
so how to upload that and the fields available in flat files are more than the sap screen
we are having more than 6 items
and 15scedule lines its abt 90data to be upload
for one customer in every 15 day
so how to do this
is there any direct use in functional side
with out the help of any abap
but my user will do it
so he need a permanent solution
with regards
subratHi Subrat ,
u can upload the data either ( Master /Transaction) data with the help of lsmw. for that all u need to do is go through the lsmw and do it. in that u can go Batch input recording/ BAPI/ IDOC any of that. here i am sending the LSMW Notes go through it and do the work.
once u create the LSMW project then u can ask the data from user or u can explain the user about the program and can run the flat file to upload the data.
if u require LSMW material Just send me blank mail from u. my mail id is [email protected]
Reward if Helpful.
Regards,
Praveen Kumar.D -
How often in the real time projects extract data from flat files n process
I am going thru teh BODS data integrator, and trying to understand the demand of ETL services extract data from a flat file, is that really impt in teh real time jobs.
Thank you very much for the helpful info.Hi,
As per the inputs given by you guys i started loading data from flat file.
I try to load 28 files from i which i was able to load 24 files succesfully.For the other 4 i got this error messages
1) Error 'Enter period in the format __.YYYY...' at conversion exit CONVERSION_EXIT_PERI6_INPUT (field CALMONTH record 1, value DUMYTRA)
Message no. RSDS012
2) a) Error 'The argument '1,008.00' cannot be interpreted as anumber' on assignment field QUANT_B record 11714 value 1,008.00
Message no. RSDS013
b) Error 'The argument '1,110.00' cannot be interpreted as anumber' on assignment field QUANT_B record 15374 value 1,110.00
Message no. RSDS013
3) a) Error 'The argument '1,140.00' cannot be interpreted as anumber' on assignment field QUANT_B record 1647 value 1,140.00
Message no. RSDS013
b) Error 'The argument '2,028.00' cannot be interpreted as anumber' on assignment field QUANT_B record 4625 value 2,028.00
Message no. RSDS013
4) Error 'The argument '1,151.00' cannot be interpreted as anumber' on assignment field QUANT_B record 7808 value 1,151.00
Message no. RSDS013
I'am unable to trace out what is the error exactly.
I checked this values in files they are perfect.
can anybody please guide me on this issue.
With Regards,
Pradeep.B -
Upload PO data into SRM system from flat file
Hi all,
I need to create conversion program to upload Open Purchase order data from flat file to System.
I am trying to create po using bapi BAPI_POEC_CREATE. but getting error .
should any one give the details of parameter need to pass the bapi .
Thanks in advance
SharadSharad,
Not the very best piece of code, but should be helpful.
REPORT zkb_po_create.
DATA: ls_po_header TYPE bapi_po_header_c.
DATA: ls_e_po_header TYPE bapi_po_header_d.
DATA: ls_po_items TYPE bapi_po_item_c.
DATA: ls_po_accass TYPE bapi_acc_c.
DATA: ls_po_partner TYPE bapi_bup_c.
DATA: ls_po_orgdata TYPE bapi_org_c.
DATA: ls_return TYPE bapiret2.
DATA: lt_po_items TYPE TABLE OF bapi_po_item_c.
DATA: lt_po_accass TYPE TABLE OF bapi_acc_c.
DATA: lt_po_partner TYPE TABLE OF bapi_bup_c.
DATA: lt_po_orgdata TYPE TABLE OF bapi_org_c.
DATA: lt_return TYPE TABLE OF bapiret2.
* Header Details
ls_po_header-businessprocess = 1.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = ls_po_header-businessprocess
IMPORTING
output = ls_po_header-businessprocess.
ls_po_header-process_type = 'EC'.
ls_po_header-doc_date = sy-datum.
ls_po_header-description = 'Test for BAPI_POEC_CREATE'.
ls_po_header-logsys_fi = 'Backend'.
ls_po_header-co_code = '1000'.
ls_po_header-currency = 'GBP'.
* Item Details
ls_po_items-item_guid = 2.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = ls_po_items-item_guid
IMPORTING
output = ls_po_items-item_guid.
ls_po_items-parent = ls_po_header-businessprocess.
ls_po_items-product_guid = '4678E74FFFC380AD000000000A8E035B'.
ls_po_items-product_id = '400030'.
ls_po_items-product_type = '01'.
ls_po_items-category_guid = '4627B461073F40FC000000000A8E035B'.
ls_po_items-category_id = '1.04.0500'.
ls_po_items-quantity = 10.
ls_po_items-deliv_date = sy-datum + 10.
ls_po_items-price = '25'.
APPEND ls_po_items TO lt_po_items.
* Account Assignment
ls_po_accass-guid = 3.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = ls_po_accass-guid
IMPORTING
output = ls_po_accass-guid.
ls_po_accass-parent_guid = ls_po_items-item_guid.
ls_po_accass-distr_perc = 100.
ls_po_accass-g_l_acct = '<gl acc>'.
ls_po_accass-cost_ctr = '<cost centre>'.
ls_po_accass-co_area = '<Ctrl area>'.
APPEND ls_po_accass TO lt_po_accass.
* Partner Functions
ls_po_partner-partner_fct = '00000019'.
ls_po_partner-partner = 'Vendor'.
ls_po_partner-parent_guid = ls_po_items-item_guid.
APPEND ls_po_partner TO lt_po_partner.
ls_po_partner-partner_fct = '00000016'.
ls_po_partner-partner = 'Requester'.
ls_po_partner-parent_guid = ls_po_items-item_guid.
APPEND ls_po_partner TO lt_po_partner.
ls_po_partner-partner_fct = '00000020'.
ls_po_partner-partner = 'Receipient'.
ls_po_partner-parent_guid = ls_po_items-item_guid.
APPEND ls_po_partner TO lt_po_partner.
ls_po_partner-partner_fct = '00000075'.
ls_po_partner-partner = 'Location'.
ls_po_partner-parent_guid = ls_po_items-item_guid.
APPEND ls_po_partner TO lt_po_partner.
ls_po_orgdata-proc_org_ot = 'O'.
ls_po_orgdata-proc_org_id = 'Pur Org'.
ls_po_orgdata-proc_group_ot = 'O'.
ls_po_orgdata-proc_group_id = 'Pur Group'.
ls_po_orgdata-parent_guid = ls_po_items-item_guid.
APPEND ls_po_orgdata TO lt_po_orgdata.
CALL FUNCTION 'BAPI_POEC_CREATE'
EXPORTING
i_po_header = ls_po_header
IMPORTING
e_po_header = ls_e_po_header
TABLES
i_po_items = lt_po_items
i_po_accass = lt_po_accass
i_po_partner = lt_po_partner
i_po_orgdata = lt_po_orgdata
return = lt_return.
READ TABLE lt_return INTO ls_return WITH KEY type = 'E'.
IF sy-subrc NE 0.
COMMIT WORK AND WAIT.
WRITE:/ ls_e_po_header-doc_number, ': created successfully'.
ELSE.
WRITE:/ 'The below errors occurs during PO creation.'.
LOOP AT lt_return INTO ls_return.
WRITE:/ ls_return-message.
ENDLOOP.
ENDIF.
Regards, Kathirvel -
Help Required regding: Validation on Data Loading from Flat File
Hi Experts,
I need u r help in the following issue.
I need to validated the transactional data loading to the GL Cube from Flat file,
1) The transactional data to the Cube to be loaded <b>only if master data</b> record exists for the <b>0GL_ACCOUNT</b> info object.
2) If the master data record does not exits then the record need to be skipped from the loading and after the loading the system should throw a message saying that these many records have been skipped (if there are any skipped records.).
I would really appriciate u r help and suggestions on solving this issue.
Regds
HariHi, write a <b>start routine</b> in transfer rules like this.
DATA: l_s_datapak_line type TRANSFER_STRUCTURE,
l_s_errorlog TYPE rssm_s_errorlog_int,
<b>l_s_glaccount type /BI0/PGLACCOUNT</b>,
new_datapak type tab_transtru.
refresh new_datapak.
loop at datapak into l_s_datapak_line.
select single * from /BI0/PGLACCOUNT into l_s_glaccount
where CHRT_ACCTS eq l_s_datapak_line-<b>field name in transfer structure/datsource for CHRT_ACCTS</b>
and GL_ACCOUNT eq l_s_datapak_line-<b>field name in transfer structure/datsource for GL_ACCOUNT</b>
and OBJVERS eq 'A'.
if sy-subrc eq 0.
append l_s_datapak_line to new_datapak.
endif.
endloop.
datapak = new_datapak.
if datapak[] is initial.
abort <> 0 means skip whole data package !!!
ABORT = 4.
else.
ABORT = 0.
endif.
i have already some modifications but U can slightly change it to suit your need.
regards
Emil -
MBGMCR02 inbound posting from Flat file
hello Friends ,
i am posting MBMCR02 Inbound idoc for oil materils .
it is giving an error status 51 "Material does not exists or not active "
i am trying to post in WE 19 and through my program also .
it is an inbound idoc program processed from flat file .
i am trying to post the goods receipts against PO.
can any one suggest any solution.
thanks
Anant1. Read the file using OPEN DATASET and read and fill up the segment info and fill the EDIDC header data
and then call function
CALL FUNCTION 'INBOUND_IDOC_PROCESS'
TABLES
IDOC_CONTROL = i_edidc
IDOC_DATA = i_edid4.
a® -
Error when uploading data from Flat file
I am uplading data from Flat file.
When I am uploading it gives an error
An error occurred in record 1 during execution of conversion exit CONVERSION_EXIT_CUNIT_INPUT for field UNIT.
Can any one help.
Thanx in Advance.
Regards,
Pradeep.Hi Pradeep,
Refer this link:
CONVERSION_EXIT_CUNIT_INPUT error in flat file load
Re: Error in Flat files upload
Also try this - In the transfer structure check the checkbox fo UNIT and retry the load. Hopefully it should be fine.
Bye
Dinesh -
Need a script to import the data from flat file
Hi Friends,
Any one have any scripts to import the data from flat files into oracle database(Linux OS). I have to automate the script for every 30min to check any flat files in Incoming directory process them with out user interaction.
Thanks.
SriniHere is my init.ora file
# $Header: init.ora 06-aug-98.10:24:40 atsukerm Exp $
# Copyright (c) 1991, 1997, 1998 by Oracle Corporation
# NAME
# init.ora
# FUNCTION
# NOTES
# MODIFIED
# atsukerm 08/06/98 - fix for 8.1.
# hpiao 06/05/97 - fix for 803
# glavash 05/12/97 - add oracle_trace_enable comment
# hpiao 04/22/97 - remove ifile=, events=, etc.
# alingelb 09/19/94 - remove vms-specific stuff
# dpawson 07/07/93 - add more comments regarded archive start
# maporter 10/29/92 - Add vms_sga_use_gblpagfile=TRUE
# jloaiza 03/07/92 - change ALPHA to BETA
# danderso 02/26/92 - change db_block_cache_protect to dbblock_cache_p
# ghallmar 02/03/92 - db_directory -> db_domain
# maporter 01/12/92 - merge changes from branch 1.8.308.1
# maporter 12/21/91 - bug 76493: Add control_files parameter
# wbridge 12/03/91 - use of %c in archive format is discouraged
# ghallmar 12/02/91 - add global_names=true, db_directory=us.acme.com
# thayes 11/27/91 - Change default for cache_clone
# jloaiza 08/13/91 - merge changes from branch 1.7.100.1
# jloaiza 07/31/91 - add debug stuff
# rlim 04/29/91 - removal of char_is_varchar2
# Bridge 03/12/91 - log_allocation no longer exists
# Wijaya 02/05/91 - remove obsolete parameters
# Example INIT.ORA file
# This file is provided by Oracle Corporation to help you customize
# your RDBMS installation for your site. Important system parameters
# are discussed, and example settings given.
# Some parameter settings are generic to any size installation.
# For parameters that require different values in different size
# installations, three scenarios have been provided: SMALL, MEDIUM
# and LARGE. Any parameter that needs to be tuned according to
# installation size will have three settings, each one commented
# according to installation size.
# Use the following table to approximate the SGA size needed for the
# three scenarious provided in this file:
# -------Installation/Database Size------
# SMALL MEDIUM LARGE
# Block 2K 4500K 6800K 17000K
# Size 4K 5500K 8800K 21000K
# To set up a database that multiple instances will be using, place
# all instance-specific parameters in one file, and then have all
# of these files point to a master file using the IFILE command.
# This way, when you change a public
# parameter, it will automatically change on all instances. This is
# necessary, since all instances must run with the same value for many
# parameters. For example, if you choose to use private rollback segments,
# these must be specified in different files, but since all gc_*
# parameters must be the same on all instances, they should be in one file.
# INSTRUCTIONS: Edit this file and the other INIT files it calls for
# your site, either by using the values provided here or by providing
# your own. Then place an IFILE= line into each instance-specific
# INIT file that points at this file.
# NOTE: Parameter values suggested in this file are based on conservative
# estimates for computer memory availability. You should adjust values upward
# for modern machines.
# You may also consider using Database Configuration Assistant tool (DBCA)
# to create INIT file and to size your initial set of tablespaces based
# on the user input.
# replace DEFAULT with your database name
db_name=DEFAULT
db_files = 80 # SMALL
# db_files = 400 # MEDIUM
# db_files = 1500 # LARGE
db_file_multiblock_read_count = 8 # SMALL
# db_file_multiblock_read_count = 16 # MEDIUM
# db_file_multiblock_read_count = 32 # LARGE
db_block_buffers = 100 # SMALL
# db_block_buffers = 550 # MEDIUM
# db_block_buffers = 3200 # LARGE
shared_pool_size = 3500000 # SMALL
# shared_pool_size = 5000000 # MEDIUM
# shared_pool_size = 9000000 # LARGE
log_checkpoint_interval = 10000
processes = 50 # SMALL
# processes = 100 # MEDIUM
# processes = 200 # LARGE
parallel_max_servers = 5 # SMALL
# parallel_max_servers = 4 x (number of CPUs) # MEDIUM
# parallel_max_servers = 4 x (number of CPUs) # LARGE
log_buffer = 32768 # SMALL
# log_buffer = 32768 # MEDIUM
# log_buffer = 163840 # LARGE
# audit_trail = true # if you want auditing
# timed_statistics = true # if you want timed statistics
max_dump_file_size = 10240 # limit trace file size to 5 Meg each
# Uncommenting the line below will cause automatic archiving if archiving has
# been enabled using ALTER DATABASE ARCHIVELOG.
# log_archive_start = true
# log_archive_dest = disk$rdbms:[oracle.archive]
# log_archive_format = "T%TS%S.ARC"
# If using private rollback segments, place lines of the following
# form in each of your instance-specific init.ora files:
# rollback_segments = (name1, name2)
# If using public rollback segments, define how many
# rollback segments each instance will pick up, using the formula
# # of rollback segments = transactions / transactions_per_rollback_segment
# In this example each instance will grab 40/5 = 8:
# transactions = 40
# transactions_per_rollback_segment = 5
# Global Naming -- enforce that a dblink has same name as the db it connects to
global_names = TRUE
# Edit and uncomment the following line to provide the suffix that will be
# appended to the db_name parameter (separated with a dot) and stored as the
# global database name when a database is created. If your site uses
# Internet Domain names for e-mail, then the part of your e-mail address after
# the '@' is a good candidate for this parameter value.
# db_domain = us.acme.com # global database name is db_name.db_domain
# FOR DEVELOPMENT ONLY, ALWAYS TRY TO USE SYSTEM BACKING STORE
# vms_sga_use_gblpagfil = TRUE
# FOR BETA RELEASE ONLY. Enable debugging modes. Note that these can
# adversely affect performance. On some non-VMS ports the db_block_cache_*
# debugging modes have a severe effect on performance.
#_db_block_cache_protect = true # memory protect buffers
#event = "10210 trace name context forever, level 2" # data block checking
#event = "10211 trace name context forever, level 2" # index block checking
#event = "10235 trace name context forever, level 1" # memory heap checking
#event = "10049 trace name context forever, level 2" # memory protect cursors
# define parallel server (multi-instance) parameters
#ifile = ora_system:initps.ora
# define two control files by default
control_files = (ora_control1, ora_control2)
# Uncomment the following line if you wish to enable the Oracle Trace product
# to trace server activity. This enables scheduling of server collections
# from the Oracle Enterprise Manager Console.
# Also, if the oracle_trace_collection_name parameter is non-null,
# every session will write to the named collection, as well as enabling you
# to schedule future collections from the console.
# oracle_trace_enable = TRUE
# Uncomment the following line, if you want to use some of the new 8.1
# features. Please remember that using them may require some downgrade
# actions if you later decide to move back to 8.0.
#compatible = 8.1.0
Thanks.
Srini -
Loading data into infocube in bi 7.0 from flat file.
Hello All,
I need the complete procedure for loading data into the infocube from flat file in bi 7.0 i.e.using transformation,DTP etc.
Please help me with some gud documents.Hi Pratighya,
Step by step procedure for loading data from flat file.
1. Create the infoobjects you might need in BI
2. Create your target infoprovider
3. . Create a source system
4. Create a datasource
5. Create and configure an Infopackage that will bring your records to the PSA
6. Create a transformation from the datasource to the Infoprovider
7. Create a Data Transfer Process (DTP) from the datasource to the Infoprovider
8. Schedule the infopackage
9. Once succesful, run the DTP
10. This will fill your target.
Hope this helps
Regards
Karthik -
Loading Hierarchy from flat file giving dump
Hi gurus,
i am trying to load data from flat file to hierarchy, when i am trying to schedule the infopackage its giving message PLEASE SELECT THE VALID INFOOBJECT and if i proceed even its giving a dump :-ASSIGN LENGTH 0.
i tired using i-doc method...then i am getting records in to BW in red and the same error
InfoObject INFOOBJECT is not available.
i followed the blog
/people/prakash.bagali/blog/2006/02/07/hierarchy-upload-from-flat-files
> points will be assigned for inputs.
Message was edited by:
ravi ahi guys,
my heirarchy is different from the one in the blog. should i mark all the infoobjects in all nodes as hierarchy relavant or only the bottom one? i also brought the 0hier_node from the business content. i dont know what other valid infoobject is missing ......plz help........
the following are more details about the dump
Program error: ASSIGN with length 0 in program "SAPLRRSV".
Error analysis
An ASSIGN statement in the program "SAPLRRSV" contained a field symbol with
length 0. This is not possible.
length 0.
This is not possible
Maybe you are looking for
-
How to return an attachment with a smartforms in solman service desk
Does anybody know if it is possible to configure smartforms to send attachments. We are using the solution manager service desk on service pack 15, and need to be able to send an attachment from this system When we confirm a case we need to be able t
-
Hi, Since I did the Yosemite 'upgrade' last week I have been having problems with my MacBook Pro that never happened before. The most frustrating problems involve my keyboard which doesn't light up (checked my settings and they are correct) and the
-
How to refere profile value in Oracle alert's
Hi , I am working on Oracle alert;s and business want's to modify Blanket notification based on no of days.And this day they want to define under profile and they want to refere this profile in oracle SQL Alert's . So business can modify any time pro
-
StorEdge 3320 supported on Solaris 10 x86?
Hello, I cannot install the SUNWsscs package on my X4200 SunFire that is running Solaris 10 for x86. It says it is not the right package, that the SUNWsscs is only for SPARC systems. Does anyone know the correct package to use to install the CLI? Tha
-
Queries around Adobe Reader Plugins
Hi, I'm in the process of developing a plugin for adobe reader and was wondering if someone could help me clear the following doubts before I go ahead: 1. I want to add a new menu item to the Adobe Reader interface and launch another application when