Validating identity issues
I have new WRT54G2 router and have a Dell Lattitude D620, PS3, Blackbery Bold and iPhone wirelessly connected. I have not been able to connect via another Dell Lattitude D610 and a Sony VAIO. The error i get when trying to connect is "Validating Identity"? Both machines are running XP and WEP key has been keyed in correctly on both, but they wont connect??? any help is appreciated
Click on the Start button >>> Control Panel >>> Network Connections- Here right click on the "Wireless Network Connection" icon and select Properties- Click on the 'Authentication' tab- Uncheck "Enable network access control using IEEE 802.1x" and click on Ok.
Similar Messages
-
The enrollment server did not provision a valid identity certificate
I'm working on rolling my own MDM service, and I'm trying to combine the SCEP and MDM payloads as the MDM protocol document from Apple suggests. I created my own SCEP web service in C# .Net and I know that the device can get a valid certificate when I just send the SCEP payload. However when I also include an MDM payload that points to the SCEP payload's UUID via the IdentityCertificateUUID key, I get the following error, "The enrollment server did not provision a valid identity certificate." This configuration is the one that is sent after the user chooses to install the initial enrollment configuration (step 1 of phase 2 in this diagram).
The device doesn't appear to even make an attempt at connecting to my server, and thanks to server side logging I know that it never reaches my SCEP web service page. This seems to indicate that there's something wrong with the certificate I use to sign the payload. I've separately tried signing it with my SSL certificate (from a pre trusted root authority), my customer MDM push certificate (chained from our vendor cert), and my self-signed root certificate authority certificate (created via makecert.exe) that the SCEP service uses to issue new certificates (i.e. device identity certificates).
I've looked at the output from the iPCU (iPhone Configuration Utility) when I create a profile with both the MDM and SCEP payloads, and it isn't a valid profile (I've even tried copying it nearly wholesale). However when I install the profile via the iPCU the error doesn't come up and it begins the SCEP enrollment process without issue.
A side note - using a preexisting MDM vendor is not an option here.
Below is the profile I'm using:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>PayloadContent</key>
<array>
<dict>
<key>PayloadContent</key>
<dict>
<key>Challenge</key>
<string>this is a challenge</string>
<key>Key Type</key>
<string>RSA</string>
<key>Key Usage</key>
<integer>5</integer>
<key>Keysize</key>
<integer>1024</integer>
<key>Name</key>
<string>mycompany</string>
<key>Retries</key>
<integer>3</integer>
<key>RetryDelay</key>
<integer>0</integer>
<key>Subject</key>
<array><array><array>
<string>CN</string>
<string>mycompany</string>
</array></array></array>
<key>URL</key>
<string>https://mysite.com/scep.aspx</string>
</dict>
<key>PayloadDescription</key>
<string>Configures SCEP</string>
<key>PayloadDisplayName</key>
<string>SCEP (mycompany)</string>
<key>PayloadIdentifier</key>
<string>com.mycompany.mdm.scep1</string>
<key>PayloadOrganization</key>
<string></string>
<key>PayloadType</key>
<string>com.apple.security.scep</string>
<key>PayloadUUID</key>
<string>57225d3d-0758-4d23-8093-e4d8c9bbd47c</string>
<key>PayloadVersion</key>
<integer>1</integer>
</dict>
<dict>
<key>AccessRights</key>
<integer>3</integer>
<key>CheckInURL</key>
<string>mysite.com/checkin.aspx</string>
<key>CheckOutWhenRemoved</key>
<false/>
<key>IdentityCertificateUUID</key>
<string>57225d3d-0758-4d23-8093-e4d8c9bbd47c</string>
<key>PayloadDescription</key>
<string>Configures MobileDeviceManagement.</string>
<key>PayloadIdentifier</key>
<string>com.mycompany.mdm.mdm2</string>
<key>PayloadOrganization</key>
<string></string>
<key>PayloadType</key>
<string>com.apple.mdm</string>
<key>PayloadUUID</key>
<string>ed0ae41d-1aa7-4721-9fe9-139c1072132c</string>
<key>PayloadVersion</key>
<integer>1</integer>
<key>ServerURL</key>
<string>https://mysite.com/checkin.aspx</string>
<key>SignMessage</key>
<false/>
<key>Topic</key>
<string>com.apple.mgmt.mypushsubject</string>
<key>UseDevelopmentAPNS</key>
<true/>
</dict>
</array>
<key>PayloadDescription</key>
<string>Profile description.</string>
<key>PayloadDisplayName</key>
<string>Test Profile</string>
<key>PayloadIdentifier</key>
<string>com.mycompany.mdm</string>
<key>PayloadOrganization</key>
<string>mycompany</string>
<key>PayloadRemovalDisallowed</key>
<false/>
<key>PayloadType</key>
<string>Configuration</string>
<key>PayloadUUID</key>
<string>13321058-4037-478c-9b1e-ef6f810065cb</string>
<key>PayloadVersion</key>
<integer>1</integer>
</dict>
</plist>I got in touch with Apple about this.
Apparently you want to send the combined MDM & SCEP payload in step 2 of phase 3 of the diagram I linked in my question, which is the profile that's sent after OTA enrollment. According to Apple you need two separate certificates (which means two SCEP enrollments) - one for OTA enrollment, and one for MDM enrollment. -
Validation for issue for production not working
hi all,
i have designed database validation for issue for production .
by default SAP gives error if instock is less than the quantity to be issued.
My Clients requierment is whlie issuing item for production, row level item quantity should not be greater than the instock of a warehouse selected for that item in row level.
while in case of sap default validation it considers all the instock of item from all the warehouse and i want to consider only those stock of warehouse whih is selected for the item at row level.
my validation is as follows but it gives error for all cases.
IF @transaction_type in ('A','U') AND @object_type = '60'
BEGIN
declare @line as numeric(4)
declare @dline as numeric(4)
declare @ritem as nvarchar(50)
declare @bref as nvarchar(50)
select @bref= T1.[BaseRef] from OIge T0 left outer JOIN
Ige1 T1 ON T0.DocEntry = T1.DocEntry
left outer join oitm t2 on t2.itemcode=t1.itemcode
left outer join OITW T3 on t3.whscode=t1.whscode and t3.itemcode = t1.itemcode
where T1.docentry=@list_of_cols_val_tab_del
set @dline=0
select @line= isnull(max(t1.linenum),0)
from OIge T0 left outer JOIN
Ige1 T1 ON T0.DocEntry = T1.DocEntry
left outer join oitm t2 on t2.itemcode=t1.itemcode
left outer join OITW T3 on t3.whscode=t1.whscode and t3.itemcode = t1.itemcode
where t1.docentry= @list_of_cols_val_tab_del
while @dline<=@line
begin
select @ritem= t1.itemcode from OIge T0 left outer JOIN Ige1 T1 ON
T0.DocEntry = T1.DocEntry
left outer join oitm t2 on t2.itemcode=t1.itemcode
left outer join OITW T3 on t3.whscode=t1.whscode and t3.itemcode = t1.itemcode
where T0.DocEntry = @list_of_cols_val_tab_del and
t1.linenum=@dline
if exists (SELECT T0.DocEntry
from OIge T0 left outer JOIN Ige1 T1 ON T0.DocEntry = T1.DocEntry
left outer join oitm t2 on t2.itemcode=t1.itemcode
left outer join OITW T3 on t3.whscode=t1.whscode and t3.itemcode = t1.itemcode
where T0.DocEntry = @list_of_cols_val_tab_del and
t1.linenum=@dline and t1.itemcode in (@ritem) and t3.onhand < t1.quantity )
BEGIN
SELECT @Error = 1, @error_message = 'less quantity'
END
set @dline=isnull(@dline,0)+1
set @ritem=' '
end
END
pls suggest solution...Iu2019m sorry. The error was that the tables contain the data after the transaction. So try this:
IF @object_type = '60' and @transaction_type= 'A'
and (Select top 1 j.BaseType from IGE1 j
Where j.DocEntry = @list_of_cols_val_tab_del)=202
BEGIN
if exists
(Select i.DocEntry from IGE1 i
Where i.DocEntry = @list_of_cols_val_tab_del
and (select w.OnHand from OITW w
where w.ItemCode=i.ItemCode and w.WhsCode=i.WhsCode)<0 )
Begin
set @error =1
set @error_message = 'Less quantity in the warehouse !'
End
END -
i am developing an native ios application i am doing a training in a company. this application contain PushNotification service. i have download a video tutorial and i complete all the tasks as the video show. but in the end when i install the provisioning profile it show this warning message : "valid signing identity not found" . i have work on this issue many days. i am new in ios developing, so day by day i read questions of developers that have this issue also and i've read the answers and try to fix it but no result. can anyone help me and guide what to do.
See the walk-thru and TS FAQ links in TN 2250 'Understanding and Resolving Code Signing Issues'
-
Hi,
When i execute an insert statement i get ORA-01843 not a valid month error.
below is the SQL i try to execute in SQLPlus;
Insert into IKD$TA_L_FACHL_SCHRITT (FACHL_SCHRITT_ID, FACHL_SCHRITT_TEXT, VALID_FROM, VALID_TO) values (1,'LOAD_STG_TMD_ZUSATZDATEN' ,'19.08.2008','31.12.9999');
However if i execute the same in Oracle SQL developer it is working fine. Can someone please suggest what could be the reason for error in SQL PLUS ?
I suspect this to be the NLS_DATE_FORMAT setting issue, please correct if im wrong.
ThanksHi,
Never use a VARCHAR2 where a DATE is needed.
Use TO_DATE (with 2 arguments) to convert a VARCHAR2 to a DATE when necessary.
For example:
Insert into IKD$TA_L_FACHL_SCHRITT
( FACHL_SCHRITT_ID, FACHL_SCHRITT_TEXT, VALID_FROM, VALID_TO)
values ( 1, 'LOAD_STG_TMD_ZUSATZDATEN' , TO_DATE ( '19.08.2008'
, 'DD.MM.YYYY'), TO_DATE ( '31.12.9999'
, 'DD.MM.YYYY)
);The problem with implicit conversions is that they don't necessarily use the format you want them to.
Always use an explicit conversion function, and specify the format. -
DMS Document Validity date issue.
Hello All,
I have an issue in DMS Valid from Date & Valid to date as below.
In our Document type when our document status is set to OB i.e. obsolete, in front of the status, system is showing two dates like 22.01.2014 to 31.12.9999.
We are not using change number functionality in this document type. But still system is showing two dates. When document is in RE i.e Release status system is showing 22.01.2104... date in front of the status.
Could you please let us know why it is showing two dates in front of document status.
ThanksHi,
from my point of view I can inform you that these dates are validity dates for the document. Normally these dates are filled when the document is released to show which version of the document is valid or was valid in a specific period.
By using menu "Extras" >> "Versions". Here a list of all versions should be displayed and the columns "Valid From" and "Valid to" should show the validity dates.
Normally these date values are only filled when the status has set the "release" flag in transaction DC10.
Best regards,
Christoph -
Sick Quota validity/ded. issue
Hello,
Can you guys please help me with this issue..
we have only one sick quota and , and its validity periods are set as year to year (validity beginning of year and deduction as end of year)..
but, we have 2 rules for new hires... for one group.. they should get quota on hire date valid thru end of year.. and for other group the quota should start after 3 months of service to end of the year. all other people with more than 1.5 yrs of service will have the quota validity and deduction dates from beginning of the year.
so how to have different validity/ded periods of one quota type..
Annmarie.here
we can divide it into three parts
for nornal hireing period if u want to generate the quota
>u can check the Pro rata option in the accural period
for the second one
Run the Programme RPTQTA00 once only when he comepletes the 3 months of service
for the last one also we can do same as manually
if this is not possible thru standrad the only option is to change the code of RPTQTA00
but check above options once -
Unable to create BOMMAT IDOCs due to validity date issue
Hello everyone, (Posted in SAP-PP forum as well)
I am having a unique issue with our Bills of Materials. After they are created and set to active, they have validity dates that go from 2001 to 9999. When I go to BD30 to distribute the BOM to the external systems I am getting the following error message:
No bill of material exists on 08/25/2009 for 2557B27H02/FBLR/1/01
Message no. BOM014
Diagnosis
You want to distribute BOM 2557B27H02/FBLR/1/01 via ALE. However, the BOM is invalid on 08/25/2009.
System Response
The system does not distribute the BOM.
Procedure
Check the BOM's validity.
If you want to distribute all BOMs with the change status for another key date, enter another valid-from date on the initial screen.
If you only want to distribute a certain BOM with the change status for another key date, enter another valid-from date or a change number on the selection screen.
We get this for any BOM in this system.
This is our QA environment and do not have this problem in our Development system. BD30 finds the BOM we specified but claims it is invalid on that date.
We are trying to figure out if there is another status or approval step that I am missing here.
SAP v4.7 level 19
Thanks and points awarded for helpful answers!
JohnHi John
Check you Material & Bill of Material in Table: MAST & STKO whether they are valid or not .. Check valid from date in Bill of material
Ramesh -
Validity date issue: Access Enforcer
Hi All,
There is a request in Access Enforcer wherein there are total 4 stages of approval, the first 2 stages have been properly approved however when the same arrived to the 3rd stage of approval, the validity date for the request was over and therefore the approvers tried to extend the same, but the "more" tab is not appearing and therefore the approvers are not able to approve the request by extensing the validity date.
Can you please help with this issue?
Thanks
VaniVani,
Go to the stage level settings for this particular stage via configuration -> workflow -> stage. Change the option of 'Change request content' to 'Yes' and the approver in this stage should be able to change the vailidity dates.
Regards,
Alpesh -
When visiting a website that has some kind of SSL certificate issue, like missing , untrusted or invalid certificate etc, the browser is supposed to show a warning message, which should warn us of potential hazards of visiting the website. I realised that my browsers have not shown such warning message for a really long time. Can anyone give me any idea why this is happening?
Thanks,
SatyaDo you get an error on this page: https://www.sothai.com/
Under Technical Details you should get:
www.sothai.com uses an invalid security certificate.
The certificate is only valid for the following names:
www.jeffersonscher.com, jeffersonscher.com
(Error code: ssl_error_bad_cert_domain)
If instead you get a real webpage, click the padlock icon in the address bar, then More Information, then View Certificate, and take a look at the "Issued by" section. What do you see there? -
Hi,
I am working on validation reports in FDM.
My logic works fine and I see result by all Entities in Validation report.
I need to see result by other dimension in validation report other than Entity dimension in FDM.
Can you let me know how can we achieve this.
Thanks in advanceHi,
Thanks for the reply, I have placed the dimensions in the rule.. But when I see the report, it is getting displayed for every entity in the file that is processed in FDM.
But I want my report to have data for each Product dimension instead of Entity ie. sum by each product
Thanks in advance -
Jquery Date Picker Validation - format issue
Hi ,
I am using 2 text items with Jquery dateicker for start date and end date items.
I have to now write a JS validation to ensure start date <= end date.
The dateformat of my items are 'd-M-yy' (02-Mar-2010) .....
When I try to use the Date.parse() function , it gives me an invalid date error....
If I change the date format to mm/dd/yy (03/02/2010) then there is no problem, I can use Date.parse() and compare the two dates, I get no error . However I need the date format to be : 02-Mar-2010
Below is a simple version of the JS function Iam using to compare dates and alert error
function f_validate()
var a = $v('P1_START_DATE');
var b = $v('P1_END_DATE');
var startDate = new Date();
var endDate = new Date();
startDate = Date.parse(a);
endDate = Date.parse(b);
// if I alert() startDate or endDate it says invalid date
if (startDate>endDate){
alert('error');
else
doSubmit();
} Has anybody done a similar validation with Jquery datepickers in the format 'd-M-yy' ?
Also how Can I use $.datepicker.parseDate function within my Javascript function so that I can convert the dates to the default format and then compare them....
Appreciate any ideas/pointers
Thanks,
Dippy
Edited by: Dippy on Mar 2, 2010 12:42 AMI've used the following without problems:
var gasDay = $v('P0_GAS_DAY');
var gasDayDate = new Date();
gasDayDate = $.datepicker.parseDate('dd-M-yy', gasDay,
monthNamesShort : ['JAN', 'FEB', 'MAR', 'APR', 'MAY', 'JUN', 'JUL', 'AUG', 'SEP', 'OCT', 'NOV', 'DEC']
); -
Hey everyone. Using Mavericks 10.9.2 but a few odd things that don't seem easy for me to pin down or change keep coming up. Hopefully most the things I'm concerned about people here can prove me wrong. Firstly over the last few weeks I've noticed that when I log into terminal half the time it says the correct thing, ie, garys-mac-pro:~ gary$
But sometimes a totally different identity seems to start up, so the text changes from the above to sudo-seedling:~ gary$ and I noticed the following text in my sharing center in system prefs looks like this:
Terminal: http://i60.tinypic.com/w814eq.png
Sharing: http://oi60.tinypic.com/w814eq.jpg
"Your computers name is: gary’s Mac Pro
Computers on your local network can access your computer at:
sudo-seedling.local"
I'd've never changed the name myself, and wouldn't have used that either, which is what aroused my attention. One final thing that I'm not 100% sure is relevant or not is that of late I keep getting 'shared devices/servers', sometimes with names you might expect like BTHUB4 (why would they put a server with an admin password I've not been told in my local network though?) another called WorkGroup (again a server that I can not get any info or access from without a password) and a few times others called ADMIN. I live at home with one other person who doesn't even have a phone, let alone a computer. When these turn up there's no info I can get on them by right clicking get info (all identifiable info just has a perpetuating spinning white wheel), they don't even seem to be accessible though terminal, I tried for a while.
[EDIT: A brand new 'shared' something has now popped up, is called home, same *** all the other ones (screencap http://i.imgur.com/fZTFsg3.png )
I've also noticed two similarly "hidden" elusive drives/servers in my root directory called home and net with very odd properties: they say always say they are zero bytes and created in 2001 =/ But the "date modified" date is always right up to date, and I get the same blank spinning wheels for any info from them. just dont like having so many new, hidden, remote and unexpected things on my MAC.. So why can I not delete them? Anyone know what these are? Are they normal? See this picture http://oi62.tinypic.com/iyzyc1.jpg
One final thing I noted that I have no clue about and defo did not set up are the settings in network center for WINS and DNS, the WINS has my 'so called' netbios name, and below that that I'm working in a workgroup called workgroup http://i57.tinypic.com/jadxmh.png
And towards DNS both boxes are greyed out and unchangeable, don't know if that is normal or not. Screncap http://oi60.tinypic.com/szbkmc.jpgHey everyone. Using Mavericks 10.9.2 but a few odd things that don't seem easy for me to pin down or change keep coming up. Hopefully most the things I'm concerned about people here can prove me wrong. Firstly over the last few weeks I've noticed that when I log into terminal half the time it says the correct thing, ie, garys-mac-pro:~ gary$
But sometimes a totally different identity seems to start up, so the text changes from the above to sudo-seedling:~ gary$ and I noticed the following text in my sharing center in system prefs looks like this:
Terminal: http://i60.tinypic.com/w814eq.png
Sharing: http://oi60.tinypic.com/w814eq.jpg
"Your computers name is: gary’s Mac Pro
Computers on your local network can access your computer at:
sudo-seedling.local"
I'd've never changed the name myself, and wouldn't have used that either, which is what aroused my attention. One final thing that I'm not 100% sure is relevant or not is that of late I keep getting 'shared devices/servers', sometimes with names you might expect like BTHUB4 (why would they put a server with an admin password I've not been told in my local network though?) another called WorkGroup (again a server that I can not get any info or access from without a password) and a few times others called ADMIN. I live at home with one other person who doesn't even have a phone, let alone a computer. When these turn up there's no info I can get on them by right clicking get info (all identifiable info just has a perpetuating spinning white wheel), they don't even seem to be accessible though terminal, I tried for a while.
[EDIT: A brand new 'shared' something has now popped up, is called home, same *** all the other ones (screencap http://i.imgur.com/fZTFsg3.png )
I've also noticed two similarly "hidden" elusive drives/servers in my root directory called home and net with very odd properties: they say always say they are zero bytes and created in 2001 =/ But the "date modified" date is always right up to date, and I get the same blank spinning wheels for any info from them. just dont like having so many new, hidden, remote and unexpected things on my MAC.. So why can I not delete them? Anyone know what these are? Are they normal? See this picture http://oi62.tinypic.com/iyzyc1.jpg
One final thing I noted that I have no clue about and defo did not set up are the settings in network center for WINS and DNS, the WINS has my 'so called' netbios name, and below that that I'm working in a workgroup called workgroup http://i57.tinypic.com/jadxmh.png
And towards DNS both boxes are greyed out and unchangeable, don't know if that is normal or not. Screncap http://oi60.tinypic.com/szbkmc.jpg -
SM30: "Enter a Valid Value" Issue?
When I do an SM30 to maintain a table, the cursor jumps to a field, a yes or no field, and says enter a valid value. When I cjheck the possible values for this it is N or Y, exactly like is in the field? I am not sure what SAP is giving me the message for.
Thank-You.How is the yes/no field declared in the table? Typically a yes/no or true/false field is set as a "X" for true or yes, " " for false or no.
-
Dear All ,
1. I am using a user exit program (ZRGGBS000 copied from RGGBS000)
2. I created a validation in which
prerequisite------> true
check----
>U100 (in the exit I im returning the value of B_RESULT as F)
After all these steps my exit is not getting called during the validation.
Can anyone please help me with the same?solved by self
Maybe you are looking for
-
Creating a 2nd account with a different iTunes collection
I managed to erase 70 gigs of iTunes from my last computer. However, I think I saved it on a backup drive. I now have a new computer with Snow Leopard, and have started over with iTunes. I would like to start a new account area and put the old i
-
When deploying application I get [Error ORABPEL-10902]: compilation failed
Hi all, I am have two development machines set up, one laptop with just Oracle XE and Oracle SOA installed and a desktop which has Oracle XE, Oracle SOA and Oracle10g. I am getting the following errors on the desktop environment and I am wondering wh
-
Retrieving shape measurements with an action
Hi, I am looking to retrieve shape information from a layer automaticly and save the info to a text file if possible. For example. In an image I will be using a protractor to find the base angle of my picture using laser levels in the image.
-
I've been trying to update my Ipod touch but when I try, it says that I need to save the apps, pictures, music, videos, etc. but when I try, all that syncs is my apps, the computer i'm trying to sync to isn't the original computer I hooked it up to.
-
Problem Starting iDVD. Need it tomorrow! Please Help
Please Help Me! I have iDVD '08 installed on my computer. I recently have been having trouble getting it to open. It will start and give me the project chooser, but when I try and create a new project it goes all rainbow wheel on me and crashes. I fo