Validating Signature problem

A co-worker has brought to my attention that when they tab to a signature field (rather than mouse click it!) and press enter,
the validation script('signature tab/script executes when signed' bit) is by bypassed?
The fields that are checked for a value are ignored?
Is there a fix for this or do i tell them to use the mouse click option?

It's OK I decided to use the Focus route instead
and that worked.

Similar Messages

  • Installation Problems - does not contain valid signature

    Anything I download from exchange panel fails to install with "does not contain valid signature" and gives error code 1. I am using widows 8 with adobe cloud versions of products. I have tried many exchange products using photoshop 32 and 64 bit versions with the same error every time. I have tried re-installing the extension manager as well as the exchange panel with no effect. I have ran the programs as the administrator as well. I have tried disabling my virus software but nothing works.

    1) In the path: C:\Users\<username>\AppData\Roaming\Adobe\CEPServiceManager4 I can not find the extensions folder.
    2) AdobeEchange isn,t in the list:
    3) The extension that I'm trying to install, has been discharged from that address about an hour ago...
    The problem is stil present.
    Thanks
    Andrea

  • The extension does not contain a valid signature

    hey guys, newbie on deck!
    So, after installing CS6 I ran the Adobe Update Manger. During the update the Adobe Extension Manager (AEM) fired off and began updating as well. One error I saw was:
    The extension 'Adobe_Flash_Professional_Toolkit_for_CreateJS' does not contain a valid signature. The extension will not be installed.
    I'm not sure what this is or what it does but I would like to:
    Understand the Adobe ecosystem and
    Clear any problems.
    Here's what I do know:
    The Mac I have is 2 days old and probably in the best shape of its life.
    I installed CS6 fresh from a DVD.
    Ran the Adobe Update Manager the next day (today).
    I don't intend to use Flash.
    If anyone can expain common causes for this behavior and a fix I would greatly appreciate it.
    Thanks in advance,
    TT

    Hi JesusPresley,
    The root cause is the updater updated Adobe Flash, which tried to install the extension above by Extension Manager in the installation. However, this extension was NOT signed with the updated Adobe certificate, so the extension installation will be rejected by Extension Manager. That is what you got. We have sent this issue to Flash team.
    If you don't use Flash, you can manually edit C:\Program Files\Adobe\Adobe Flash CS6\XManConfig.xml, and remove the line <Data key="SupportedInSuite">CS6</Data>. Thanks.
    Xiaoyi

  • BER error - validating signature

    I work for an electronic invoicing software house and we are presently having problems validating signatures within PDF signed using an RBS TrustAssured (Identrus) signature which Adobe tells me “Signature is valid, but revocation of the signer’s identity could not be checked”. 
    When I then go into the certificate properties revocation tab and hit the problems encountered button the error message is "Error encountered while BER decoding".
    RBS say they are confident the problem is Adobe and not their certs. Any ideas what the problem is and what can be done to solve this?
    FYI "Perfect PDF 6 Reader" has no problems validating.
    Thanks in advance
    #15. Crouch 

    I know this is an old thread but I'm experiencing the same issue as well. Using Acrobat Reader v11.0.6 on Windows XP.
    I filled out a PDF via Adobe Reader and then signed the document via DocuSign and when I open the PDF to see if it validates, I get the following error: “Signature is valid, but revocation of the signer’s identity could not be checked”.
    I've tried reinstalling Reader and the issue still exists.
    What's interesting is that in Acrobat at home on my Mac, the same file  validates just fine.
    Any help would be appreciated.
    Here is a photo of the issue:

  • "Files shared by these updates has no valid signature" How can I download I-tune software update

    I have a problem with installing the version 5 of the I-Pad software. It says "Files shared by these updates has no valid signature. It will not be installed.
    Thanks,
    Annie

    Which "software updates" are you trying to download?  For iTunes?  iPod Nano?  Did you download the Windows version?

  • Error #2046: The loaded file did not have a valid signature in flex 4

    As part of our CI build, the ant script that builds the client side (flex 4) projects also runs a set of FlexUnit4 tests on the deployed project. Most of the tests work but a few fail with this error
    RSL
    http://local.foo.com/bar/com/blah/components/someComponent/framework_4.1.0.16076.swz failed to load.
    Error #2046: The loaded file did not have a valid signature.
    The build machine is running Ununtu 10.10 with Firefox 3.6 and Flashplayer 10.2. If I run  the exact same set of tasks, accessed from the same URL in windows everything passes with no problem. After some searching I did run across this thread: http://forums.adobe.com/message/2747415#2747415 but when I went looking for the libflashsupport.so file mentioned, the Ubuntu docs seemed to indicate that it was no longer needed.
    I'm at my wits end here. Is libflashsupport.so actually needed in Ubuntu 10.10 and if so where would I find it? If not does anyone know of another issue that could be responsible for this?

    hello,
    I have the same issue, Ubuntu 10.10, flashplayer 10.3rc1
    mxmlc SimplePrj.mxml -debug=true -benchmark=true --target-player=10 -output ../deploy/SimplePrj.swf
    mxlc verbose:
    Loading configuration file /home/.../flex-config.xml
    Initial setup: 79ms
    start loading swcs 9ms Running Total: 88ms
    Loaded 34 SWCs: 740ms
    precompile: 1062ms
    Required RSLs:
        http://fpdownload.adobe.com/pub/swz/flex/4.5.0.20967/framework_4.5.0.20967.swz with 1 failover.
        http://fpdownload.adobe.com/pub/swz/tlf/2.0.0.232/textLayout_2.0.0.232.swz with 1 failover.
        http://fpdownload.adobe.com/pub/swz/flex/4.5.0.20967/spark_4.5.0.20967.swz with 1 failover.
        http://fpdownload.adobe.com/pub/swz/flex/4.5.0.20967/sparkskins_4.5.0.20967.swz with 1 failover.
        http://fpdownload.adobe.com/pub/swz/flex/4.5.0.20967/mx_4.5.0.20967.swz with 1 failover.
    Files: 540 Time: 3380ms
    Linking... 27ms
    SWF Encoding... 18ms
    /.../SimplePrj/deploy/SimplePrj.swf (80059 bytes)
    postcompile: 45ms
    Total time: 4259ms
    Peak memory usage: 81 MB (Heap: 62, Non-Heap: 19)
    I had to copy the swz to deploy folder since failovers are not yet available.
    * accessing from windows machines it loads swz without complaints.
    Jaco

  • Error #2046: The loaded file did not have a valid signature.

    I have three different applications which suddenly stopped working with this error
    Error #2046: The loaded file did not have a valid signature.
    None of the sites has been touched in Months, I assumed they would keep working the way they had.
    I wonder how many other sites are experiencing this and how many PO'd customers there are out there??
    This is really bad business practice, what is causing it?
    Dan Pride
    Note: the three were developed around the same time, one domain went down for a few days and was then renewed????

    Daniel... have you found a solution to your problem?
    I am also having the same problem. I was googling with no avail, when I noticed you added this post just yesterday,
    so I am thinking that adobe has done something to the swz files hosted on thier servers.
    Can someone from Adobe confirm if anything was done to either swz files or the crossdomain files on their end?
    I am in the same boat as you... no changes on our side, but the application has suddenly stopped working.
    We were building against a beta build of flex 4 (4.0.0.10485)
    I wonder which sdk version you are using?
    Here is what I see through the debugger...
    Warning: Ignoring 'secure' attribute in policy file from http://fpdownload.adobe.com/pub/swz/crossdomain.xml. The 'secure' attribute is only permitted in HTTPS and socket policy files. See http://www.adobe.com/go/strict_policy_files for details.
    [SWF] C:\Inetpub\wwwdata\xxxxxxxxx_Application.swf - 847,661 bytes after decompression
    Error #2046: The loaded file did not have a valid signature.
    Failed to load RSL http://fpdownload.adobe.com/pub/swz/flex/4.0.0.10485/framework_4.0.0.10485.swz
    Failing over to RSL framework_4.0.0.10485.swz
    Error #2046: The loaded file did not have a valid signature.
    PS... I have tried multple PCs (XP, Vista, Server 2008) with different versions of flash player (10.0.45.2, 10.0.22.87)
    Any help appreciated.

  • Extension does not contain valid signature

    Hi all,
    I open again a thread about a problem at our extension installation on several computers.
    Few persons can't install our extensions. They get this message: " The extension xxx does not contain valid signature. The extension will not be installed"
    Our plugins worked always since the beginning ( about December 2010 )
    Our certificate is valid and has been created by TrustCenter.
    I use ucf.jar with correct parameters...
    I thought that's a manifest problem. So, I tried to generate plugins from Extension Builder trial version which generates manifest "automatically" but the result is the same. I also tried to get a release from a non-signed certificate ( 1024-RSA and 2048-RSA )....but unsuccessfull...
    How to get a extension with valid signature for all computers ?
    Thanks.
    Regards.
    Pierre RAFFA
    Aquafadas

    (@harbs: already budgeted for it )
    Yesterday we finalized our investigation and we now have a plan regarding the fix. Our #1 priority has been to get a working solution to customers ASAP. Here are the details:
    Problem
    The current implementation of Extension Manager cannot access the system root keychain on Mac 10.7.1. That is due to a particular component used by Extension Manager.
    Solution
    Stage 1:
    We will make a manual fix available by Friday 10/28 morning Pacific time. The fix will be a .swf that end-users should download and manually replace the Extension Manager .swf on their machines. After they replace the .swf, they can go ahead and install extensions using Extension Manager. This will only apply to users who are on Mac 10.7+. In addition, your users should be running Extension Manager CS5 or CS5.5 and should download the latest update through Adobe Update Manager if they haven't done so already.
    I understand that this is not optimal user experience but it is the fastest solution that we can make available.
    We will post the .swf and detailed instructions on this forum thread.
    Stage 2:
    We are already working on an update to Extension Manager that will be available through Adobe Update Manager in mid November. The update will work even if some of your users have replaced the Extension Manager .swf on Stage 1 above (ie it will overwrite the fix from Stage 1). Only users that face this problem will be notified to download the update.
    Note 1: Doing the manual fix is not necessary. You could still wait until the AUM update is available.
    Note 2: The fix we do in Stage 1 is different than the one we'll do for Stage 2.
    Note 3: No update is necessary for CS Extension Builder or the CS SDK.
    Please let me know if you have any questions or concerns.
    Thank you again for helping us in discovering and solving this issue and your understanding as we drive to a solution. I will keep you all posted as news develops.
    gabriel tavridis
    product manager
    Message was edited by: PECourtejoie (corrected date)

  • "The extentions does not contain a valid signature"

    Hi, i got a problem when i installing RA Beauty retouch "The extensions does not contain a valid signature", can anyone help me cause i really want use this extention, running on macos  10.9.4 and adobe extention manager CC ! And i already uncheck Extension access internet too !

    Oh, thank god you reply me, the plugin full name is  RA Beauty Retouch Panel
    and this is the website : RA Beauty Retouch Panel for Photoshop CC, CC 2014 & CS6 | Retouching Academy
    can you check this for me ? thank you very much !

  • Anyone know what is Error #2046: The loaded file did not have a valid signature

    can anyone help me solve this issue? when i try to run project or make swf file
    Error #2046: The loaded file did not have a valid signature
    show up. how do i get a valid signature? or it show up because it is a trial version?
    please help me!!

    Hi Ryan,
    Please see this recent post: http://forums.adobe.com/message/3277736#3277736
    Your best option is to open your project in the shipping version of Flash Catalyst CS5 and re-publish it.  Catalyst CS5 can open projects that were created with the beta 2 release (October 2009) or newer.
    If your project won't open, then it was probably created in an earlier beta/alpha version of Catalyst.  If you know how to write Flex code, with some work you can upgrade these old projects by hand: import the project into Flash Builder 4 and then resolve any problems you encounter with compiling and running the project.
    Sorry for the trouble -- hope this info helps,
    - Peter

  • HT1222 Wheb I try to update iTune I am getting a message "the site has not a valid signature" and the downloading is stopped. How can I fix IT?

    Wheb I try to update iTune I am getting a message "the site has not a valid signature" and the downloading is stopped. How can I fix IT?
    I am using windows 7 64

    That suggests that the installer is getting damaged during the download.
    I'd first try downloading an installer from the Apple website using a different web browser:
    http://www.apple.com/itunes/download/
    If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

  • Appstudio exporter does not contain a valid signature

    HI I am trying to install AppStudio plugin to work with InDesign but Extension Manager is throwing the following error...
    appstudio exporter does not contain a valid signature !
    I have updated all software.
    (I am downloading new apps in the background)
    I have a CC subscription

    Hi,
    please click "tools"->"preferences", unselect "Allow Extension Manager to access Internet" option, and then try to install it again.

  • My itunes will not work and this is the error message. Problem signature:   Problem Event Name:     BEX   Application Name:     iTunes.exe   Application Version:     11.0.1.12   Application Timestamp:     50c8fc7e   Fault Module Name:     QuickTime.qts_un

    Problem signature:
      Problem Event Name:          BEX
      Application Name:          iTunes.exe
      Application Version:          11.0.1.12
      Application Timestamp:          50c8fc7e
      Fault Module Name:          QuickTime.qts_unloaded
      Fault Module Version:          0.0.0.0
      Fault Module Timestamp:          4ea5d609
      Exception Offset:          653f1040
      Exception Code:          c0000005
      Exception Data:          00000008
      OS Version:          6.1.7601.2.1.0.768.3
      Locale ID:          1033
      Additional Information 1:          0a9e
      Additional Information 2:          0a9e372d3b4ad19135b953a78882e789
      Additional Information 3:          0a9e
      Additional Information 4:          0a9e372d3b4ad19135b953a78882e789

    I am encountering the same thing as I am trying to restore my iPhone. How to fix this? I tried repairing iTunes. Still having the issue.

  • Trying to download adobe program 'adobe p;hotshot CS5 Optional Automate Plug-ins' but get a message "does not contain valid signature"  Any ideas to get around that please.

    Trying to download adobe program  adobe photoshop CS5 Optional Automate Plug-ins, but get a message  that it does not contain valid signature and it won't install the app.  Can someone help with this please?  Trying to reach Adobe by phone is impossible.
    ev

    First, have you installed all the updates for photoshop cs5 by going to Help>Updates from within photoshop cs5?
    The automated installer only installs the following plugins:
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4965
    The following plug-ins and associated files are available via an installer:
    Automate Plug-Ins:
    • Contact Sheet II 
    • Picture Package (ContactSheetII) 
    • Web Photo Gallery (WebContactSheetII) plus presets 
    • Script for Layer Comps to Web Photo Gallery
    Other Optional Plug-Ins:
    • TWAIN
    Other plugins including the pattern maker plugin need to be installed manually using this download:
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4964

  • My itunes wount open when i try to open it this message comes up Problem signature:   Problem Event Name:     BEX   Application Name:     iTunes.exe   Application Version:     10.6.3.25   Application Timestamp:     4fd16377   Fault Module Name:     CRYPTU

    when i try to open my Itunes this Message comes up
    Problem signature:
      Problem Event Name:    BEX
      Application Name:    iTunes.exe
      Application Version:    10.6.3.25
      Application Timestamp:    4fd16377
      Fault Module Name:    CRYPTUI.dll_unloaded
      Fault Module Version:    0.0.0.0
      Fault Module Timestamp:    4ce7b847
      Exception Offset:    68221040
      Exception Code:    c0000005
      Exception Data:    00000008
      OS Version:    6.1.7601.2.1.0.768.3
      Locale ID:    5129
      Additional Information 1:    0a9e
      Additional Information 2:    0a9e372d3b4ad19135b953a78882e789
      Additional Information 3:    0a9e
      Additional Information 4:    0a9e372d3b4ad19135b953a78882e789
    Read our privacy statement online:
      http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
    If the online privacy statement is not available, please read our privacy statement offline:
      C:\Windows\system32\en-US\erofflps.txt

    Taken at face value, you're having trouble with a Windows operating system file there.
    Perhaps try an sfc /scannow. For instructions, see the following Microsoft document:
    How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista or on Windows 7

Maybe you are looking for

  • Question on what CR 2008 report type to use for a report

    Post Author: JohnN CA Forum: General Hi all,         I am new to Crystal Reports and have been tasked with using Crystal Reports 2008 to create a report. I have attached an image of what the report needs to look like. The report needs to look like a

  • View Authorisation of trxn SM04

    How to give only vire authorisation for SM04. I want the user to only SM04 and display the users. User should not be able to log off other user ... thanks amit

  • In "about this mac" on my macbook air the model is wrong...

    In the UI "about this mac" on my MacBook Air (middle 2011) the model is wrong, it's appear MacBook Pro. Does anyone knows why??? It was the same with the first update of Lion (10.7.1) and now with the upgrade ML too...

  • Problem with process imported BPA - BPM / IllegalArgumentException

    Hi, I installed the latest version of SOA Suite and Jdev (11.1.1.5), and i have problems when tried to import a BPMN model from a BPA Repository. [IllegalArgumentException in o.bpm.project.catalog.loaders.impl.TaskDefinitionParsedObject:115] This pro

  • New Mac Pro 2013 late version USB 3.0 hub issue during boot

    Hi all, I just purchased a new Mac Pro 8 core with 32GB of ram and 1 TB drive. When I connect a USB powered 3.0 hub and turn on my Mac Pro, it gets hung on while booting. (Gray screen before the Apple logo appears on boot). If I pull the USB 3.0 hub