Validating UNB and UNH segment in EDIFACT using Seeburger BIC
Hi Experts,
Just a small thing if someone can help with. What's happening is if an interchange comes with wrong interchange number in UNB vs UNZ segment BIC is actually rectifying that automatically and it makes the UNZ same as UNB. However I don't want BIC to do this.
Any suggestions on how can i stop this from happening please?
regards
Hi Prateek,
Thank you for a quick help I will try that in the morning and I am positive that should settle it.
Hi Rajesh,
That was my understanding too. However for UNH segment the trailer is UNT so if UNH had 100 and UNT had 101 BIC is not throwing an error but it is not correcting it either. But I think I can handle it in messag mapping and itsn't a big deal I was meant to do that anyway.
However for UNB the trailer is UNZ and if I had UNB = 500 and UNZ = 499 BIC will automatically correct and I am positive the reason for that is what Prateek mentioned. And hence by the time I get it in Integration Engine I have no way of knowing it was incorrect. This odd behaviour it is almost like it is set to auto correct.
For UNT it is not doing the right thing either, e.g. if I had UNT = 36 but the real count should have been 38 it will actually autocorrect it to 38 and actually let it pass to message mapping, however the Control it is generating it is rejecting the message based on UNT was not correct.
But for the first two it even creates a control with status 'accepted'.
Thank you guys I will close the thread in the morning if things are working
regards
Similar Messages
-
Missing UNB and UNZ segments in D95B Codeco EDI Schema!
Hello,
I need to use the D95B Codeco EDI Schema in a map but the UNB and UNZ segments are missing from this schema. I read on the net that these segments have to be added in the pipeline using EDI Schema extensions and/or envelopes. How do I go about adding these
two segments to the shipped EDI Codeco schema without invalidating it?
Thanx a lot for your answers.Hi BizTalkler,
As per your request have composed article (divided in three parts as it was too long) and helper class in this case is bit different as have considered subelement values as well (which was not in EDI X12), below are links:
BizTalk Server : Fetching UNB and UNG Segment Values From Interchange Envelope and Mapping - Part 1
BizTalk Server : Fetching UNB and UNG Segment Values From Interchange Envelope and Mapping- Part 2
BizTalk Server : Fetching UNB and UNG Segment Values From Interchange Envelope and Mapping- Part3
EDIFACTSegmentValueFetcher Helper Class
Maheshkumar
S Tiwari|User
Page|Blog|BizTalk
Server : Fetching UNB and UNG Segment Values From Interchange Envelope and Mapping -
Batching different messages using Seeburger BIC
Hi Experts
I have an interesting requirement. I need to batch different messages e.g. ORDERS, ASN & Controls into a single Interchange. They are all EDIFACT messages and we are using Seeburger & BIC.
Any idea on how to do this?
regardsreject that nightmare requirement because it would be very difficult for the monitoring team to find error causes in such a message. Imagine BIC conversion will give some the infamous conversion errors because some string is too long. Now if you have dozens of messages in the same document, good luck
CSY -
Hi,
I am using the BIC module provided by Seeburger for EDI to XML conversion. The input EDI message is a 850 version 4010 message. I have configured the sender communication channel for Functional Acknowledgement and configured the message splitter which is working fine.
When I run this scenario for a few of the test files with a 850 4010 message, the classifier module does not recognise the EDI message as a 850 4010 message and hence the mapping(See_E2X_ANSIX12_850_V4010) is not called. There are no errors in the sender communication channel monitoring and I get only the functional acknowledgement message.
There is a warning message in the CC monitoring which says SEEBURGER/MSGSPLITTER: There is no attachment to split. So there is nothing to do
Am is missing anything here? If so could you please throw some light on this issue.
I have seen this thread Re: SEEBURGER/MSGSPLITTER: There is no attachment to split., but could not get much info.
Thanks,
ChandraHi Frederic,
I have configured the message splitter in the seeburger work bench and the split parameter has been set to true in the module configuration. As per my understanding, the 997 message will have a rejected status only if the EDI mapping is called, but this apparently never happens and my guess is that the 850 4010 message is not recognised by the classifier.
The setting works perfectly with one of my test files which is a 850 message as well, so the configuration is right. The situation described in my query occurs for a few 850 messages, since the test data is obtained from several partner systems.
Thanks,
Chandra -
IDoc to File[EDI] using seeburger BIC Mapping Tool
Hi Gurus,
I'm having a scenario of IDoc to EDI FIle, I'll be using IDoc DESADV.DELVRY03.ZDELVR0X; Kindly advise steps needed in BIC Mapping Tool. I've already referred to this post /people/dijesh.tanna/blog/2008/05/25/sap-pixi-content-conversion-using-generator-mapping-functionality-of-seeburger-part-1 but still can't get it right.
Thanks.Thanks a lot experts :D....
I'll be using a file adapter for my scenario..
Any Idea on what Seeburger BIC mapping module should I use?
am I just use the ff module?
Module u2013 Processing Sequence
Number 1 Name localejbs/CallBicXIRaBean Type Local Enterprise Bean Module Key bic
Number 2 Name localejbs/CallSapAdapter Type Local Enterprise Bean Module Key exit
Module u2013 Module Configuration
Module Key bic Parameter name destSourceMsg Parameter value MainDocument
Module Key bic Parameter name destTargetMsg Parameter value MainDocument
Please advise.
Thanks.
Edited by: Devilbatz on Dec 8, 2010 8:31 AM -
EDI Integration---Using Seeburger Adapter
Hi All,
I have a below requirement.
EDI----->XI--
>SAP and vice versa.
I am new to EDI integration,i would like to know the procedure steps to do the above scenario.
Thanks in advance,
AVRHi,
How you want to communicate with the EDI system... If it is using AS2 adapter, then you need to purchase it from seeburger and configure it in the sender side and receiver side it'll be Idoc adapter. And in the ESR you need to import the xsd of EDI document under external definitions and map it to the idoc.Please refer the below links it may help you.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/10b17369-9522-2c10-84a6-d75d8a8ace22
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=221354005
http://wiki.sdn.sap.com/wiki/display/XI/SeeburgerSuiteforSAPPI
Handling EDI interfaces using Seeburger BIC modules
Regards,
Priyanka -
I bought my iphone 4 in the UK and I am trying to use a sim in the UAE and it doesn't work. It says that the sim is not valid, how can I get this unlocked?
You are saying the phone is locked, but then you are saying there is no provider. The two situations cannot peacefully coexist. Contact Apple and they can tell you if the phone is locked and if locked to which provider the phone is locked. People on this board are not Apple employees and cannot get you that information.
-
I Have iPad4 and using with Aricel Prepaid 3G SIM, How to check my VAlidity period and balance amount through iPad?. pls help me, M.Kumar, Chennai,
<Email Edited By Host>There are 2 concepts attached to a bank balance. The balance as per your books of accounts and another is the balance maintained with the bank. I believe i need not explain these 2 concepts. These 2 balances can be obtained from Oracle system provided some of prerequsities are met with.
Balance as per your books - This is nothing but the GL balance available. In order to obtain balances for each bank accounts, it is advised that each bank account should have a separate account code combination. This is achieved generally by having a separate natural account for each bank. The code combination is attached to the cahs account for each bank. By maintaining separate account code combination, the balance in each code combination can be obtained from GL (provided transactions are accounted and posted in GL). These balances represent the balance for each bank according to your books of accounts. You can create an FSG for this purpose and provide the same to the customer, so that they can run the same whenevr they want.
Balance as per bank - This balance is maintained by oracle in 2 ways - either the bank balance can be manually entered for each bank account for each date (quite cumbersome). Else, while loading the bank statement, the bank balances are also loaded. There are various types of bank balances stored - value dated balance, available balance, float balance etc. Depending on the balances provided by bank along with the bank statement, the bank balance can be recorded in oracle system. After the bank statement is uploaded and balances stored, standard cash management reports are available to query for the bank account balances. In order to view daily movement, the bank statement should be loaded on daily basis.
Hope this helps.
Vinit -
Entering into site using valid id and password through URL class
hi......
i need to access the google adwords editor site. I have account on that but i want to access that by using URL class and then i need to use some data on getting response. It is very urgent for me. Whats the drawback is i am unable to handle the cookies send by the server. Can any one help how to get the response from that by handlin cookies or sessions through program. I have valid id and password.
Thanks in advance.
Regards...............
v.sureshThanks for the response.
I attempted to remove cookies, but I can not identify any of the cookies on the list with the PrimeVest web site. No PrimeVest, no PVs, nothing that looks like it came from them.
I have also reported the problem to PrimeVest and their tech did answer. He suggested erasing the browsing history (temporary internet files), which I did with no effect. He also had me check for the correct starting page address, which was OK. He stated that they are aware of a problem and it is on their list. No indication of how far down that list though. His only cure was to use IE for now, which I was already doing. Perhaps he can tell me which cookies to remove. -
Report for Validity Start and End Date in PO
Dear All
Is there any report where I can get PO validity start and end date which user input in addtional data header tab of PO?
Regards
Satish KumarHi,
Yes, It is available standard report using T-code ME2N - Purchasing Document (PO) Per Document Number, enter the T-code and provide the following input data's are as follows.
Scope of List : ALV ( for Ms-Excel format report)
Plant : __________ to __________ (if required)
Document Date : ____________ to ___________ (if Required)
Execute the report shown by default in excel format and if required PO validity start and end data, you have to select Change Layout button and open new window options screen right side field option as Validity Per.Start, Validity Period End, Commutative number field data's are selected and click <--- arrow button and then click bottom tick marked button. Now, the report shown your requirement.
Hope, it is useful for you,
Regards,
K.Rajendran -
Difference between defining segment and maintaining segment for GL items
Hello All,
Can someone tell me the difference between 'Defining a Segment' (in enterprise structure) and 'Maintaining Segment for general ledger Items' (tcode FQ0300) and when is the later used?Hi,
Segment reporting is part of functional reporting in sap. Segment reporting is required as per International Accounting Standard 14 for listed companies thats why it is defined in Enterprise structure .
Segment is maintained in profit
center master data from where it is derived, When you post to a GL account containing segment it gets posted to profit center. This is the basis purpose of maintaining segment at Gl account level. Segment reporting is gradually being replaced by business area. This is for you information.
Regards -
getting the same answer everytime I try to log into i cloud. I get a message that I have a valid ID and password but it is not an icloud account. I have tried for almost a entire year to go there. i have re-downloaded the icloud contorl panel. before I got this notebook HP windows 8 it was easier . I do not like Internet explorer so I downlloaded.Google chrome. What must I do to go to icloud? I tried Internet Explorer and chrome. I buy music on itunes and I am not sure I get all the content I purchase. I have had to reset my password often and my email address to. I once spoke to a live tech a long while ago and he helped me combine all my purchased and downloaded music. Now its impossble to talk to anyone on the phone or even online and i am frustrated.
You must create the account using an Apple device, a Mac (Lion or greater) or an IOS device (IOS5 or greater). Having done that you will be able to sign in from your Windows machine.
FYI, iCal is an application that can display calendars from iCloud (and others) it is not a calendar itself, merely a calendar client. In Windows Outlook is the calendar client. -
Wheb I try to update iTune I am getting a message "the site has not a valid signature" and the downloading is stopped. How can I fix IT?
I am using windows 7 64That suggests that the installer is getting damaged during the download.
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer? -
Validating an XML document to a schema using ColdFusion
This is something I have never tried before. We created an XML Schema to define XML documents we expect to receive from various entities. When we receive the document, we would like to validate it before processing it. I think ColdFusion is up to this from reading the documentation, but we have not got anything working yet.
When we try and xmlParse() our test XML file against the XML schema we get the following error. When we use a web based XML validation tool and feed it the same XML file and schema it validates just fine.
An error occured while parsing an XML document.
[Error] :2:6: cvc-elt.1: Cannot find the declaration of element 'pur'.
The error occurred in D:\playground\warren\ppur_file_import.cfm: line 57
55 :
56 :
57 : <cfset xmldoc = XmlParse(ExpandPath(filepath), true, ExpandPath(validator)) />
58 : <cfdump var="#xmldoc#">
59 : <cfabort>
Searching for the error has not provided me any useful hints. Can anybody here?XML SCHEMA
<?xml version="1.0" encoding="iso-8859-1"?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema">
<!-- Simple Types -->
<xs:simpleType name="RECORD_ID">
<xs:restriction base="xs:string">
<xs:pattern value="[AaBbCc]"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="REPORT_MONTH">
<xs:restriction base="xs:integer">
<xs:pattern value="(0[1-9]|1[0-2])"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="REPORT_YEAR">
<xs:restriction base="xs:integer">
<xs:pattern value="[0-9]{2}"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="MFG_FIRMNO">
<xs:restriction base="xs:integer">
<xs:pattern value="[0-9]{7}"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="LABEL_SEQ_NO">
<xs:restriction base="xs:integer">
<xs:pattern value="[0-9]{5}"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="REVISION_NO">
<xs:restriction base="xs:string">
<xs:pattern value="[A-Za-z]{2}"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="REG_FIRMNO">
<xs:restriction base="xs:integer">
<xs:pattern value="[0-9]{7}"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="GROWER_ID">
<xs:restriction base="xs:integer">
<xs:pattern value="[0-9]{11}"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="CEDTS_IND">
<xs:restriction base="xs:string">
<xs:pattern value="[Ee]|[ ]"/>
<!-- needs to match E or a blank. -->
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="APPLIC_DT">
<xs:restriction base="xs:integer">
<xs:pattern value="(0[1-9]|1[0-2])(0[1-9]|[1-2][0-9]|3[0-1])([0-9]{2})"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="SITE_CODE">
<xs:restriction base="xs:integer">
<xs:pattern value="[0-9]{6}"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="QUALIFY_CD">
<xs:restriction base="xs:integer">
<xs:pattern value="[0-9]{2}"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="PLANTING_SEQ">
<xs:restriction base="xs:integer">
<xs:pattern value="[0-9]"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="ACRE_TREATED">
<xs:restriction base="xs:integer">
<xs:pattern value="[0-9]{8}"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="UNIT_TREATED">
<xs:restriction base="xs:string">
<xs:pattern value="[ATSCKUPatsckup]"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="AMT_PRD_USED">
<xs:restriction base="xs:integer">
<xs:pattern value="[0-9]{10}"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="UNIT_OF_MEAS">
<xs:restriction base="xs:string">
<xs:pattern value="LB|OZ|GA|QT|PT|KG|GR|LI|ML"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="DOCUMENT_NO">
<xs:restriction base="xs:integer">
<xs:pattern value="[0-9]{8}"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="LINE_ITEM">
<xs:restriction base="xs:integer">
<xs:pattern value="[0-9]{4}"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="PROCESS_DT">
<xs:restriction base="xs:integer">
<xs:pattern value="[0-9]{4}"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="BATCH_NO">
<xs:restriction base="xs:integer">
<xs:pattern value="[0-5][0-9][0-9][0-9]"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="COUNTY_CD">
<xs:restriction base="xs:integer">
<xs:pattern value="[0-5][0-9]"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="SECTION">
<xs:restriction base="xs:integer">
<xs:pattern value="[0-9]{2}"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="TOWNSHIP">
<xs:restriction base="xs:integer">
<xs:pattern value="[0-9]{2}"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="TSHIP_DIR">
<xs:restriction base="xs:string">
<xs:pattern value="[NSns]"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="RANGE">
<xs:restriction base="xs:integer">
<xs:pattern value="[0-9]{2}"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="RANGE_DIR">
<xs:restriction base="xs:string">
<xs:pattern value="[EWew]"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="BASE_LN_MER">
<xs:restriction base="xs:string">
<xs:pattern value="[HMShms]"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="AER_GND_IND">
<xs:restriction base="xs:string">
<xs:pattern value="[AFGOafgo]"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="SITE_LOC_ID">
<xs:restriction base="xs:string">
<xs:pattern value="[-0-9 ]+"/>
<!-- Examples in files I checked
only had numeric characters and
a dash. The county contract doesn't
specify numeric-only, so letters may
be acceptable. I find no evidence of
any letters being used. -->
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="ACRE_PLANTED">
<xs:restriction base="xs:integer">
<xs:pattern value="[0-9]{8}"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="UNIT_PLANTED">
<xs:restriction base="xs:string">
<xs:pattern value="[ATSCKUPatsckup]"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="APPLIC_TM">
<xs:restriction base="xs:integer">
<xs:pattern value="[0-9]{4}"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="APPLIC_CNT">
<xs:restriction base="xs:integer">
<xs:pattern value="[0-9]{6}"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="FUME_CD">
<xs:restriction base="xs:integer">
<xs:pattern value="[0-9]{4}"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="LICENSE_NO">
<xs:restriction base="xs:integer">
<xs:pattern value="[-0-9A-Za-z]{13}"/>
</xs:restriction>
</xs:simpleType>
<!-- end Simple Types -->
<!-- !!!!!!!!! Begin Abstract Types !!!!!!!!! -->
<xs:complexType name="application_data_abs" abstract="true">
<xs:sequence>
<xs:element name="GROWER_ID" type="GROWER_ID" />
<xs:element name="CEDTS_IND" type="CEDTS_IND" />
<xs:element name="APPLIC_DT" type="APPLIC_DT" />
<xs:element name="SITE_CODE" type="SITE_CODE" />
<xs:element name="QUALIFY_CD" type="QUALIFY_CD" />
<xs:element name="PLANTING_SEQ" type="PLANTING_SEQ" />
<xs:element name="ACRE_TREATED" type="ACRE_TREATED" />
<xs:element name="UNIT_TREATED" type="UNIT_TREATED" />
<xs:element name="AMT_PRD_USED" type="AMT_PRD_USED" />
<xs:element name="UNIT_OF_MEAS" type="UNIT_OF_MEAS" />
<xs:element name="DOCUMENT_NO" type="DOCUMENT_NO" />
<xs:element name="LINE_ITEM" type="LINE_ITEM" />
</xs:sequence>
</xs:complexType>
<xs:complexType name="application_abs" abstract="true">
<xs:sequence>
<xs:element name="key_data" type="key_data" />
<xs:element name="product_data" type="product_data" />
</xs:sequence>
</xs:complexType>
<!-- !!!!!!!!! End Abstract Types !!!!!!!!! -->
<!-- !!!!!!!!! Start Complex Types !!!!!!!!! -->
<xs:complexType name="product_data">
<xs:sequence>
<xs:element name="MFG_FIRMNO" type="MFG_FIRMNO" />
<xs:element name="LABEL_SEQ_NO" type="LABEL_SEQ_NO"/>
<xs:element name="REVISION_NO" type="REVISION_NO" />
<xs:element name="REG_FIRMNO" type="REG_FIRMNO" />
</xs:sequence>
</xs:complexType>
<xs:complexType name="key_data">
<xs:sequence>
<xs:element name="RECORD_ID" type="RECORD_ID" />
<xs:element name="COUNTY_KEY">
<!--
The optional COUNTY_ID field would be used by
the Counties to include their internal
record identifier. This would allow DPR
to reference a county's internal record ID
in the event of data inconsistencies.
-->
</xs:element>
<xs:element name="REPORT_MONTH" type="REPORT_MONTH" />
<xs:element name="REPORT_YEAR" type="REPORT_YEAR" />
</xs:sequence>
</xs:complexType>
<xs:complexType name="fileInfo">
<xs:sequence>
<xs:element name="PROCESS_DT" type="PROCESS_DT" />
<xs:element name="BATCH_NO" type="BATCH_NO" />
<xs:element name="COUNTY_CD" type="COUNTY_CD" />
</xs:sequence>
</xs:complexType>
<xs:complexType name="mtrs_data">
<xs:sequence>
<xs:element name="SECTION" type="SECTION" />
<xs:element name="TOWNSHIP" type="TOWNSHIP" />
<xs:element name="TSHIP_DIR" type="TSHIP_DIR" />
<xs:element name="RANGE" type="RANGE" />
<xs:element name="RANGE_DIR" type="RANGE_DIR" />
<xs:element name="BASE_LN_MER" type="BASE_LN_MER" />
</xs:sequence>
</xs:complexType>
<xs:complexType name="ag_application_data">
<xs:complexContent>
<xs:extension base="application_data_abs">
<xs:sequence>
<xs:element name="AER_GND_IND" type="AER_GND_IND" />
<xs:element name="SITE_LOC_ID" type="SITE_LOC_ID" />
<xs:element name="ACRE_PLANTED" type="ACRE_PLANTED" />
<xs:element name="UNIT_PLANTED" type="UNIT_PLANTED" />
<xs:element name="APPLIC_TM" type="APPLIC_TM" />
<xs:element name="FUME_CD" type="FUME_CD" />
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<xs:complexType name="nonag_application_data">
<xs:complexContent>
<xs:extension base="application_data_abs">
<xs:sequence>
<xs:element name="APPLIC_CNT" type="APPLIC_CNT" />
<xs:element name="LICENSE_NO" type="LICENSE_NO" />
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!--- "Ag" -->
<!--
Type A:
Data that would appear on individual lines
in the old A type
(F file type, agricultural job report)
Type B:
Data that would appear on individual lines
in the old B type
(F file type, agricultural monthly production summary)
-->
<xs:complexType name="ag_application">
<xs:complexContent>
<xs:extension base="application_abs">
<xs:sequence>
<xs:element name="mtrs_data" type="mtrs_data" />
<xs:element name="application_data" type="ag_application_data" />
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!--- "Non_Ag" -->
<!--
Data that would appear on individual lines
in the old C type
(C file type, non-agricultural monthly summary)
-->
<xs:complexType name="nonag_application">
<xs:complexContent>
<xs:extension base="application_abs">
<xs:sequence>
<xs:element name="application_data" type="nonag_application_data" />
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!-- The individual lines of data that are transmitted. -->
<xs:complexType name="data_lines">
<xs:sequence>
<xs:element name="Non_Ag" type="nonag_application" minOccurs="0" maxOccurs="unbounded"/>
<xs:element name="Ag" type="ag_application" minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
</xs:complexType>
<!-- !!!!!!!!! End Complex Types !!!!!!!!! -->
<xs:element name="pur">
<xs:complexType>
<xs:sequence>
<xs:element name="County" minOccurs="0" maxOccurs="1">
<!--
Tag for counties to put county-specific
data in (eg, their batch number, timestamp,
contact info, etc)
-->
</xs:element>
<!-- File: information specific to the file -->
<xs:element name="File" type="fileInfo" minOccurs="1" maxOccurs="1"/>
<!-- Data: lines of data transmitted -->
<xs:element name="Data" type="data_lines" minOccurs="1" maxOccurs="1"/>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:schema> -
Another question concerning Context Expired and Can No Longer be Used error
I know this has been covered many times before - each time with essentially the same recommendations: Make sure the time zone is set for the web applications, make sure the clocks are synchornized between the hosts, adjust the timeouts (I've done defaults,
1 minute/2 minute and 5 minute/10 minute), extend security validation time outs, turn off security validation time outs.
Note of these has worked. It seems, from other folks with the issue, that this is a problem that's been stumping Microsoft as well. So I don't feel like paying them $500 bucks for a support session for this.
Has anyone come accross a better fix than the above?
Here's the latest correlation data from the logs. It points to the login timeout as the problem, but I'm at a loss as to what to do about it.
Thanks in advance.
Getting Error Message for Exception System.Web.HttpUnhandledException (0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.SharePoint.SPException: The context has expired and can no longer be used. (Exception
from HRESULT: 0x80090317) ---> System.Runtime.InteropServices.COMException: The context has expired and can no longer be used. (Exception from HRESULT: 0x80090317)
at Microsoft.SharePoint.Library.SPRequestInternalClass.SetHttpParameters(String bstrHttpMethod, String bstrRequestDigest, UInt32 flags, Guid gTranLockerId, Byte[]& ppsaImpersonateUserToken, Boolean bIgnoreTimeout, String bstrUserLogin, String bstrUserKey,
UInt32 ulRoleCount, String bstrRoles, Boolean bWindowsMode, String bstrAppPrincipalName, Boolean bIsHostHeaderAppPrincipal, String bstrOriginalAppPrincipalIdentifier, ApplicationPrincipalInfo& pAppUserInfo, Boolean bInvalidateCachedConfigurationProperties,
Int32 lAppDomainId, ISPManagedObjectFactory pFactory, Boolean bCallstack, ISPDataCallback pCanaryCallback)
at Microsoft.SharePoint.Library.SPRequest.SetHttpParameters(String bstrHttpMethod, String bstrRequestDigest, UInt32 flags, Guid gTranLockerId, Byte[]& ppsaImpersonateUserToken, Boolean bIgnoreTimeout, String bstrUserLogin, String bstrUserKey, UInt32
ulRoleCount, String bstrRoles, Boolean bWindowsMode, String bstrAppPrincipalName, Boolean bIsHostHeaderAppPrincipal, String bstrOriginalAppPrincipalIdentifier, ApplicationPrincipalInfo& pAppUserInfo, Boolean bInvalidateCachedConfigurationProperties, Int32
lAppDomainId, ISPManagedObjectFactory pFactory, Boolean bCallstack, ISPDataCallback pCanaryCallback) -
-- End of inner exception stack trace ---
at Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx)
at Microsoft.SharePoint.Library.SPRequest.SetHttpParameters(String bstrHttpMethod, String bstrRequestDigest, UInt32 flags, Guid gTranLockerId, Byte[]& ppsaImpersonateUserToken, Boolean bIgnoreTimeout, String bstrUserLogin, String bstrUserKey, UInt32
ulRoleCount, String bstrRoles, Boolean bWindowsMode, String bstrAppPrincipalName, Boolean bIsHostHeaderAppPrincipal, String bstrOriginalAppPrincipalIdentifier, ApplicationPrincipalInfo& pAppUserInfo, Boolean bInvalidateCachedConfigurationProperties, Int32
lAppDomainId, ISPManagedObjectFactory pFactory, Boolean bCallstack, ISPDataCallback pCanaryCallback)
at Microsoft.SharePoint.SPGlobal.CreateSPRequestAndSetIdentity(SPSite site, String name, Boolean bNotGlobalAdminCode, String strUrl, Boolean bNotAddToContext, Byte[] UserToken, SPAppPrincipalToken appPrincipalToken, String userName, Boolean bIgnoreTokenTimeout,
Boolean bAsAnonymous)
at Microsoft.SharePoint.SPWeb.InitializeSPRequest()
at Microsoft.SharePoint.SPWeb.EnsureSPRequest()
at Microsoft.SharePoint.SPWeb.get_Request()
at Microsoft.SharePoint.Publishing.Navigation.SiteNavigationSettings..ctor(SPSite site)
at Microsoft.SharePoint.Publishing.Navigation.SiteNavigationSettings.GetSiteNavigationSettings(SPSite site)
at Microsoft.SharePoint.Publishing.Navigation.PortalSiteMapNode.GetNavigationChildren(NodeTypes includedTypes, NodeTypes includedHiddenTypes, Boolean trimmingEnabled, OrderingMethod ordering, AutomaticSortingMethod method, Boolean ascending, Int32 lcid)
at Microsoft.SharePoint.Publishing.Internal.CodeBehind.AreaNavigationSettingsPage.AddChildrenToControl(String parentId, PortalSiteMapNode node, Int32 depth, Int32 maxDepth)
at Microsoft.SharePoint.Publishing.Internal.CodeBehind.AreaNavigationSettingsPage.InitializeNavigationEditSort()
at Microsoft.SharePoint.Publishing.Internal.CodeBehind.AreaNavigationSettingsPage.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.HandleError(Exception e)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Barry CohenHi Barry,
Thank you for your patience. Here are my suggestions about this issue:
1. Check SPNs for the application pool account for the web application ‘http://community.enet’ and take a screenshot: setSPN -L domain\app pool account (KVAERNER-NO\sno00769)
2. Ensure SharePoint WFE and APP boxes are trusted for delegation:
Trust for delegation.
Note: To perform this procedure, you must be a member of the Domain Admins group or the Enterprise Admins group in Active Directory, or you must have been delegated
the appropriate authority. As a security best practice, consider using Run as to perform this procedure.By default, no server is trusted for delegation, meaning that a service on a server in the Active Directory, cannot act on a user’s behalf, basically this
means that a service if trusted for delegation, can impersonate a user and request a Kerberos ticket in the users name.
Validate this setting in Active Directory using the following:
- Open Active Directory Users and Computers.
-In the console tree, click Computers. (Or the appropriate OU where your SharePoint Server resides)
-Right-click the computer you want to be trusted for delegation, and click Properties
-On the Delegation tab, check if ‘Trust this computer for delegation to any service (Kerberos only)’ is selected.
-Repeat this for all the servers in the SharePoint 2013 production farm.
3. Please let me know the SharePoint 2013 version. We recommend that you can upgrade to SharePoint 2013 SP1.
Best Regards,
Dats Luo
Maybe you are looking for
-
Problema al crear .exe en labview 10
Mi inconveniente surge apenas pongo en la opción tools Build Application (EXE) from vi me tira el siguiente error: Error 7 occurred at Open VI Reference in AB_UI_Load_Page.vi->AB_UI_FRAMEWORK.vi->AB_Create_Build_Application.vi->EBUIP_Global_OnCommand
-
Vendor Email id in PO Output tabhttps
Hello All, We have a business requirement where, we need to modify the vendor contact details (Email, phone, fax) while creating the PO. After shopping cart approved completely, then the PO will gets created automatically. To meet this requirement I
-
Facing the problem in loading the applet in mozilla, Firefox and netscape
Dear sir, Well I am facing the problem regarding loading of applet in firefox,mozilla and netscape. Its working fine in IE6 I have the samplecode which asks for jdk1.4 whenever the applet gets loaded in IE6 and also it works fine for every browser bu
-
BPC Error in Validation "0RATE_TYPE does not exist in source"
Hi Experts, We are on BPC 7.5 Netweaver version SP7. I am loading FX RATES to BPC from BI DSO using Data Manager. I am getting an error while doing validation for One of the InfoObject in DSO stating "0RATE_TYPE is not a valide command or 0RATE_TYPE
-
I have not yet used a new Intel based Mac yet. I have seen conflicting reports online about it's ability to run legacy OSX software, but no reports of OS9 Classic software. Does it run Classic, and if so, how well? iMac G5 Mac OS X (10.4.4) I wan