Validation Assignment expression editor pop-up

Hi All,
When am trying to open the validation/assignment expression editor, its not opening at all.
looks like its hidden somewhere. am using the 7.1 ramp-up.
I have re-installed the Datamanager component.
Have checked with calculated fields, its working.
Kindly revert to me asap.
thanks
Alexander.

Hi Alex,
I am just guessing here, but it might be a bug or if you're using two monitors every now and then, you might have moved the popup to the other screen for better visibility like I do
When I get back to one monitor it opens the popup in the non visible area of my laptop. You might try and extend virtually your desktop to reach wider area and see if it's there by scrolling...
Console is a different application and it remembers the position of the popup window separately... that's why you have it there.
Again... just an idea
Regards,
Boris

Similar Messages

Context object not visible in the Expression Editor

Hi ,
I have created a context object and assigned it to the sender interface ( outbound interface) but i couldn't see the created object in the Expression editor.
Can anyone tell me why it is like this? It shows only the technical context objects .
with Regards
VasS

Hi Vasagam,
Please try out the following and see if it works:
- Did you set the "Adapter-Specific Message Properties" in the Sender File Communication Channel.You have to select this check box and also select the "File Name" check box(this will be visible once the initially mentioned check box is selected)
- Is the interface to which the context object is assigned an outbound Interface(Sender Interface) in receiver determination? Only then the context object will be visible.
Regards,
abhy

Can't see structure in Expression Editor

Hello everybody,
I want to set an condition für the receiver aggrement.
I have an IDOC for the output structure.
In Weblog
the is a structure shown in the expression editor
on page 6.
Under which conditions is the structure shown?
Thanks a lot.
Regards Mario

Hi Mario,
I hope by now your doubts might have got cleared.
Well in the weblog, I had to do a mapping wherein I check the source message and on some rules of validation i set a flag in my output structure.
Now say I dont use the BPM (a dummy BPM with just a receive and send step),then while using the condition editor I will get only the source structure. But it is of no use to me as my flag field is set in the target and I need to route my message based on that field. So in order to get that field i use the BPM. There would be two receiver determination,
1. From sender to BPM &
2. BPM to receiver
and it is in the 2nd receiver determination that i check the field (since here the sender will be the BPM and i see the target structure in the condition editor).
Hope this clears your doubt(and rather not confuse you more )
Regards,
Shabarish

Unity express- express editor

Ran across the editor express http://www.ciscosystems.or.at/en/US/docs/voice_ip_comm/unity_exp/rel7_0/administrator/GUI/edit_exp.html#wp1018788
while doing mortal combat with the CUE editor windows app.
The express editor good for everything but the most complex menus imo.

You have to use two steps, Get Digit String and a Switch.
Get Digit String into a variable "DialedDigits", first-digit timeout ~5 seconds or so, subsequent digits 2 or 3. Collect [your extension length] digits. Valid map is 0123456789. No cancel digit, no terminating digit.
Success: Try to Redirect to DialedDigits as an extension, handle failure as necessary
Timeout: Collected less than 4 digits, but may have collected and stored a menu option.Switch on "DialedDigits":
"1": Menu option 1 handler
"2": Menu option 2 handler
Other menu options as appropriate
"" (empty string): Play "Sorry, I didn't hear your input, please try again", other error logic
Default (other than the above): Play "Sorry, didn't understand your input, please try again", other error logic
Unsuccessful: Don't think this happens w/o a cancel digit.

Since installing 3.6.9 my Joomla content editor pop-up windows no longer return the URLs selected

I recently upgraded to Firefox 3.6.9 and found that when using the editor in a Joomla 1.0.15 website , the content editor pop-up windows no longer return URLs selected (eg: image or file URL to be used in a link). I have been using the site with no problems for many years, and the problem was cured when I reinstalled 3.6.8

Thanks cor-el but the problem is not in my web development but is a new issue/problem in FireFox which was not present in all versions up to and including version 3.6.8 and was only introduced in version 3.6.9. I have also established that the same problem also exists in FireFox version 4 beta 6 and have therefore also raised a second question today.
My understanding was that I should raise these issues in this forum, but I will also check out the other forum.

Image not uploading to Express Editor

Hello,
I have a high resolution scan of an old glass negative image that I just uploaded to PS.
I need to do some editing/cleaning however when I click on the express editor, the image selected does not appear. I only get a white blank and no image. The original scan is at 5800dpi.
Why cant I get the Image to appear in the Express Editor?

Try the Express forum:
http://forums.adobe.com/community/psexpress/psexpress_onlinetools

In the expression editor dialog box my TAB key doesn't function correctly

This is bizarre behavior that seems to have started recently.
In Visual Studio 2012, an SSRS project, any expression editor dialog:
The tab key doesn't work right.
Open the expression editor and:
* I see a blinking cursor and I can type in the expression box.
* If I hit the tab key, the cursor disappears and I cannot type. I appear to lose focus in the editor but focus doesn't appear to go anywhere else in the dialog box.
* If I hit the tab key a 2nd time, the cursor is still gone and I cannot type.
* If I hit the tab key a 3rd time, I can finally type again and note that I am now
3 tabstops in. In other words it seems like the tabs were working but I lost the ability to type anything until I "tab" 3 magical times.
I can work around this by hitting tab key then grabbing the mouse and clicking where the cursor SHOULD be which returns focus to the text area.
Hopefully this image helps clarify:
Anybody know what is wrong?
Microsoft Visual Studio Professional 2012
Version 11.0.61030.00 Update 4
Microsoft .NET Framework
Version 4.5.50709
Installed Version: Professional
LightSwitch for Visual Studio 2012 04938-004-0034007-02367
Microsoft LightSwitch for Visual Studio 2012
Office Developer Tools 04938-004-0034007-02367
Microsoft Office Developer Tools
Team Explorer for Visual Studio 2012 04938-004-0034007-02367
Microsoft Team Explorer for Visual Studio 2012
Visual Basic 2012 04938-004-0034007-02367
Microsoft Visual Basic 2012
Visual C# 2012 04938-004-0034007-02367
Microsoft Visual C# 2012
Visual C++ 2012 04938-004-0034007-02367
Microsoft Visual C++ 2012
Visual F# 2012 04938-004-0034007-02367
Microsoft Visual F# 2012
Visual Studio 2012 Code Analysis Spell Checker 04938-004-0034007-02367
Microsoft® Visual Studio® 2012 Code Analysis Spell Checker
Portions of International CorrectSpell™ spelling correction system © 1993 by Lernout & Hauspie Speech Products N.V. All rights reserved.
The American Heritage® Dictionary of the English Language, Third Edition Copyright © 1992 Houghton Mifflin Company. Electronic version licensed from Lernout & Hauspie Speech Products N.V. All rights reserved.
Visual Studio 2012 SharePoint Developer Tools 04938-004-0034007-02367
Microsoft Visual Studio 2012 SharePoint Developer Tools
ASP.NET and Web Tools 2012.3.41009
Microsoft Web Developer Tools contains the following components:
Support for creating and opening ASP.NET web projects
Browser Link: A communication channel between Visual Studio and browsers
Editor extensions for HTML, CSS, and JavaScript
Page Inspector: Inspection tool for ASP.NET web projects
Scaffolding: A framework for building and running code generators
Server Explorer extensions for Windows Azure Web Sites
Web publishing: Extensions for publishing ASP.NET web projects to hosting providers, on-premises servers, or Windows Azure
Color Theme Designer 1.0
Designer for creating new color themes
NuGet Package Manager 2.8.50126.400
NuGet Package Manager in Visual Studio. For more information about NuGet, visit http://docs.nuget.org/.
PreEmptive Analytics Visualizer 1.0
Microsoft Visual Studio extension to visualize aggregated summaries from the PreEmptive Analytics product.
SQL Server Analysis Services
Microsoft SQL Server Analysis Services Designer
Version 11.0.3369.0
SQL Server Data Tools 11.1.40706.0
Microsoft SQL Server Data Tools
SQL Server Integration Services
Microsoft SQL Server Integration Services Designer
Version 11.0.3369.0
SQL Server Reporting Services
Microsoft SQL Server Reporting Services Designers
Version 11.0.3369.0
BIDSHelper
BIDS Helper 2012 - An add-in to extend SQL Server Data Tools - Business Intelligence (SSDTBI formerly BI Development Studio)
(c) 2014 Version 1.6.6.0
http://www.codeplex.com/bidshelper
SQL Prompt 6
For more information about SQL Prompt, see the Red Gate website at
http://www.red-gate.com
For customer support, call 1-866-733-4283.
Copyright © 2006–2009 Red Gate Software Ltd

Hi Bostaevski,
Thank you for posting in MSDN forum.
According to your description, as you said that the cursor disappears and cannot type issue. It seems that the issue may be not Visual Studio the VS IDE issue.
In addition, I find a similar thread about the
Expression Editor Cursor Issue,
please see:
http://www.beta.microsoft.com/VisualStudio/feedbackdetail/view/780682/vs-2012-rdlc-expression-editor-cursor-issue#.
Therefore, I suggest you could also try to press alt with left and right arrow keys and check if it is works fine.
Thnank for your understanding!
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

SSRS date format in Expression Editor issue

Hi,
In the SSRS Report I am using a date field in the expression(=Fields!StartDate.Value), it returns the values in 'mm:dd:yyyy hh:mm:ss'. I dont want the hh:mm:ss part, I want only mm:dd:yyyy. is it possible using the expression editor with the built in SSRS functions?
Thanks,

Hi Mahasweta,
Thanks a lot again ......=formatdatetime(Fields!StartDate.Value,2) works .......
Please Note : While using format(Fields!StartDate.Value,"mm/dd/yyyy"), i didnt get the 'mm' part, there was '00', rest dd and yyyy works file. Where as =formatdatetime(Fields!StartDate.Value,2) works perfectly.
In the =formatdatetime(Fields!StartDate.Value,2) expression, what does this '2' stands for? where shall i get more information....

Including customized xquery functions in XQuery/XSLT expression Editor-OSB

Hi,
I have written a customized xquery function. I want this to be included in the List of Xquery Functions which is displayed by Oracle Service Bus in the XQuery/XSLT
Expression Editor. OSB displays the built in xquery functions in the XSLT/Xquey Expression Editor. Is there any way to add the customised xquery to this list, so that it can be dragged and dropped later?
Thanks,
Balaji.

I doubt if that is exposed out side of Oracle Engineering (Not public/documented). Please raise a support ticket for enhancement. If PM should concur you might get the steps that need to be performed for this feature.
Thanks
Manoj
Edited by: Manoj Neelapu on Jun 8, 2010 8:37 AM

Unable to See the Technology Function in The Expression Editor- ODI 11G

Hi,
I am developing Interface whereas i am unable to see the Technology functions in the Expression Editor where i am trying to do some transformation .
Secondly in the Header it is showing Default language in place of SQL(Oracle)
any fix please..
Thanks,
KP

I fixed it myself- thanks
Below was the step i did which resolved the issue. hope this will help others
Go to ODI Studio
In Topology- Expand Language
Import New Language
import in synonym INSERT_UPDATE mode
The Language definitions from $ODI_HOME/oracledi/xml-reference/LANG_SQL.xml
click OK
close ODI Studio and Open again. that fixed my issue.
Thanks,

Receiver Determination -- Expression Editor is empty

Hi all,
Scenario is the following:
SAP (RFC) sends data to XI (3.0), XI sends it to Oracle DB (stored procedure)and gets back the return-message from Oracle, then forwards it to SAP (RFC). (Inbound Synchronous). Everything works well.
Now I'd like to add just a condition to the existing Receiver Determination and here's my problem:
Receiver Determination --> Conditions --> Left Operand --> Expression Editor (there's no structure, everything empty!) I've even refreshed xi cache etc. No success!
Could you please help me? All kind of suggestions / documentation are welcome!
Thank you in advance!
Greetings from NC
Khaled

Hi all,
Thank you very much for your suggestions. FYI, I've done the followings:
- Did clear SLD cache and 'Complete Cache Refresh' (TA:sxi_cache).
- Did insert manually an xPath expression --> getting errors.
- Did add the SWCV of Sender to the Receiver and vice versa (in SLD) --> so there's a link between both.
Still not working and getting the message in Integration Builder: "Message interface no longer exists in the Integration Repository."
I'll appreciate any further suggestions.
Have a good time!
Regards
Khaled

Advanced editor pops up after only one click so how do I get this to stop?

When I write an email I typically don't keep typing all the way to the right margin. Instead
I choose to keep the line of words narrow by routinely hitting
"enter." Hence, it's like creating a new paragraph after every line
as I am doing now. Then when I go to edit, such as to take out
a word, I will move the cursor and place it in a white field next
to that word. I would then backspace to delete the word. However,
as soon as I click the advanced editor pops up. I am very careful
to only click once. After attempting to consistently repeat this annoyance,
it seems that it is most likely when I have previously used the enter key and
it be most likely to happen with that first edit. A single click later in the white
field is not likely to trigger the advanced property editor. I'm with others that
write about this being a very annoying event, and it has just started after a year
of using thunderbird. I have a lot of folders. If I re-install I would not want to loose those
folders. A follow up question may be, how do I back up these folders?

Clicking once in a white space does not open the advanced editor.
This is only initiated if you click twice in a white space.
However, the point that some people keep clicking twice either because of their computing habits in a word processing package or otherwise has been taken on board by the developers. As you say, people like yourself found the pop up irritating and wanted it removed from so easily being selected.
You will be pleased to hear that if you update to 31.1.0 then you will find that accessing the advanced property editor has been prevented from opening using the double click.
The Thunderbird program is not stored in the same place as the Thunderbird Profile folders.
So updating via 'Help' > 'About Thunderbird'
click on 'Check for updates'
will not have any effect on folders.
You could also uninstall the current Thunderbird via Control Panel > Programs and Features and then download from here:
* https://www.mozilla.org/en-US/thunderbird/all.html
However, it is always a good idea to backup your Profile just in case :)
You can use MozBackup tool to backup a Profile or use ImportExporttool to backup emails or you can manually copy the Profile folder.
Suggest you save all backups to an external storage device for safe keeping.
Here is info on Backup:
* http://kb.mozillazine.org/Profile_backup
* http://kb.mozillazine.org/MozBackup
ImportExporttool:
* https://addons.mozilla.org/en-US/thunderbird/addon/importexporttools/

Validating SQL expressions

Hello,
Am researching a way for validating SQL expressions.
Say I have expressions substr(<tname.coumn_name>,1,2), I want to parse this expression for completeness, meaning whether the expression can be used in a case, decode or a normal select statement as a where clause.
Is there any functionality available within oracle to achieve this or any pointer to some sample PL/SQL code to achieve this is welcome.
TIA,
Prakash. T

If all we want to do is parsing, without creating a plan_table of any kind and without writing to it, we can use dbms_sql.
SQL> var s varchar2(100)
SQL> exec :s := 'select substr(dummy,1,1) from dual'
PL/SQL procedure successfully completed.
SQL> declare
2    l_c pls_integer;
3 begin
4    l_c := dbms_sql.open_cursor;
5    dbms_sql.parse(l_c, :s, dbms_sql.native);
6 end;
7 /
PL/SQL procedure successfully completed.
SQL> exec :s := 'select substrx(dummy,1,1) from dual'
PL/SQL procedure successfully completed.
SQL> /
declare
ERROR at line 1:
ORA-00904: "SUBSTRX": invalid identifier
ORA-06512: at "SYS.DBMS_SYS_SQL", line 826
ORA-06512: at "SYS.DBMS_SQL", line 39
ORA-06512: at line 5It is after all only one additional variable declaration and an extra line of code.

SQL calculation in expression editor CR 2008

This SQL expression works on MS SQL Server 2005 but not in the SQL Expression Editor of Crystal Reports.
Why? Any alternatives?
declare @Trash Decimal
declare @Done Decimal
set @Trash =
select count(*) from dbo.NL_NM_NUON
WHERE MAN_CAMPAIGNNAME = '9.304_Winback TM CM Jan 2010 - Bosch' AND
    fldFormalities In ('Persoon is verhuisd', 'Adres matcht niet met telefoonnummer',
         'Weigering Gesprek', 'Dubbel in bestand', 'Persoon overleden',
         'Beslisser tijdens actieperiode afwezig')
    OR
    fldEndresult = 'Is sinds kort klant bij NUON'
set @Done =
select count(*) from
NL_NM_NUON Where
NL_NM_NUON.MAN_CAMPAIGNNAME = '9.304_Winback TM CM Jan 2010 - Bosch' AND
STATUS IN ('U','F')
Select (@Trash / @Done) * 100
Edited by: Valmont on Feb 10, 2010 2:36 PM

Create two different sql expressions like this
%Expression1:
select count(*) from dbo.NL_NM_NUON
WHERE MAN_CAMPAIGNNAME = '9.304_Winback TM CM Jan 2010 - Bosch' AND
    fldFormalities In ('Persoon is verhuisd', 'Adres matcht niet met telefoonnummer',
         'Weigering Gesprek', 'Dubbel in bestand', 'Persoon overleden',
         'Beslisser tijdens actieperiode afwezig')
    OR
    fldEndresult = 'Is sinds kort klant bij NUON'
%Expression2:
select count(*) from
NL_NM_NUON Where
NL_NM_NUON.MAN_CAMPAIGNNAME = '9.304_Winback TM CM Jan 2010 - Bosch' AND
STATUS IN ('U','F')
Now Create a formula like this
({%Expression1}/{%Expression2})*100
HTH
Raghavendra.G

User and global function not resolved and not visible in expression editor

Testing ODI 11.1, I'm trying to affect the value of a (project) variable with a project function result within an ODI package.
My text variable is actually affected but with the litteral name "myfunction('myarg')" instead of its proper result (implemented with Oracle but it doesn't even get so far).
Best hint I got : when I open an expression editor, my variable is visible but my project function is not (although clearly accessible through the project browser tree ; same behavior at global level )
Am I missing something obvious ?
Thanks

Hi,
In the following case study, and I quote from it..
" Note that you should never see the function names in the generated code. If you do, check out the following elements:
User Function names are case sensitive. Make sure that you are using the appropriate combination of uppercase and lowercase characters
Make sure that you are using the appropriate number of parameters, and that they have the appropriate type (string, number or date)
Make sure that there is a definition for the User Function for the technology in which it is running. This last case may be the easiest one to oversee, so try to keep it in mind!
As long as you see SQL code in place of the User Function name, the substitution happened successfully."
found ....
http://blogs.oracle.com/dataintegration/2009/09/odi_user_functions_a_case_stud.html

Validation Assignment expression editor pop-up

Similar Messages

Maybe you are looking for