Validation Errors with new Install of W7 x64 Ent Debug Checker On New Equipment

I am receiving multiple Errors. I am trying to use the Windows 7 x64 Enterprise which happens to be the Debug Checker version OS as the host machine.  I have only built the machine, and tried to load the Drivers.
I say this due to the starting issue that upon the loading of the entire driver set, (for the MB, Seagate Harddrive, and Vid Card), I would get the BSOD.  I identified that the Bluetooth driver was the issue.  I then did not load the Bluetooth
drivers for the MB on the 5<sup>th</sup> or so install of the 7 Ent os.  (Tried Server 2k8 r2. Which is not compatible with the MB Drivers.)
I have not received a single Update either.  The Auto update feature claims that I am up to date.  I do not believe this due to the fact that any fresh Install of any OS has about several decades of updates and reboots to go through.
Upon trying the suggestions on the forum about turning off the IE Addons, the errors remain.  Also the results of the sfc /scannow are copied below.
My Questions
I am seeking assistance on solving the Errors that have refused to leave me alone , to put it humorously and am asking for your insight and wisdom.  Will you take a look??
Do I need to go to Win 7 Ent or Ult x64 that is not a Debug Checker version.
Are there other Microsoft download Registery file checkers besides the MGA Diag tool that are freeware that I can use to check, for corrupted registry files.
Or do I just need to take it to the stores (Fry’s and Microcenter) that recommended the equipment and have them just reload the software and allow them the headache of solving the error issue, by paying them to install the drivers and have ALL of the
drivers work. (including the blue tooth)
The Goal is to turn it into a Active Directory Server using Virtual Box with Server 2k8 R2 running in the virtual box environment.
Errors and Results.
There are also a number of logs that show various Crit, Error, and Warning logs.  I will include those if need be.
This is the majority of the error messages, and I have missed the opportunity to capture others.
Internet explorer encountered Validation errors:
Validation Error
i.     
Process Name: iexplorer.exe
ii.     
Module Name : mshtml.dll
iii.     
Assert offset: 0000000000B221DB
Validation Error
i.     
Process Name: iexplorer.exe
ii.     
Module Name : comctl32.dl
iii.     
Assert offset: 00133A2A
Validation Error
i.     
Process Name: iexplorer.exe
ii.     
Module Name : mshtml.dll
iii.     
Assert offset: 008BE823
Validation Error
i.     
Process Name: iexplorer.exe
ii.     
Module Name : mshtml.dll
iii.     
Assert offset: 0040F9E8
Validation Error
i.     
Process Name: iexplorer.exe
ii.     
Module Name : iertutil.dll
iii.     
Assert offset: 001DEC51
Validation Error
i.     
Process Name: iexplorer.exe
ii.     
Module Name : KERNELBASE.dll
iii.     
Assert offset: 00014159
Validation Error
i.     
Process Name: iexplorer.exe
ii.     
Module Name : mshtml.dll
iii.     
Assert offset: 0000000000B221DB
Microsoft Management Console Encountered a Validation Error
Validation Error
i.     
Process Name: mmc.exe
ii.     
Module Name : ieframe.dll
iii.     
Assert offset: 00000000006C9283
Scripted Diagnostics Native Hot encountered a Validation Error
Validation Error
i.     
Process Name: sdiagnhost.exe
ii.     
Module Name : urlmon.dll
iii.     
Assert offset: 00000000001A0A73
Validation Error
i.     
Process Name: sdiagnhost.exe
ii.     
Module Name : KERNELBASE.dll
iii.     
Assert offset: 0000000000017f32
Windows System Assessment Tool encountered a validation error
Validation Error
i.     
Process Name: winsat.exe
ii.     
Module Name : KERNELBASE.dll
iii.     
Assert offset: 0000000000017F32
Windows Explorer Encountered a validation Error
Validation Error
i.     
Process Name: Explored.exe
ii.     
Module Name : thumbcache.dll
iii.     
Assert offset: 00000000000300BE
AI Suite 2 encountered a validation error
Validation Error
i.     
Process Name: AI Suite 2.exe
ii.     
Module Name : ntdll.dll
iii.     
Assert offset: 000686BD
the number “2” is the substitutedfor the roman numeral 2
I believe that this is part of the MB Suite.
My the environment is a new equipment, and Downloaded student software. Windows 7 Enterprise SPK 1 Debug Checker, Valid Key with the software download.  Activated on 8-12-2012
Motherboard: Asus p9x79 Deluxe, Part number: 90-mibh50-g0aay0kz
Chip Set: bx80619i73930k
2x Memory: cmx16gx3m2a1600c11 Corsair
Video Card: Diamond R7870 2GB DD OC 2xDVI/HDMI/2xDisplayport memory Clock 1250 MHz
Hard Drive: 9jb1n3-574 (leave the last two didgets off when searching in the browser) This is a Seagate 2TB
Generic optic drive: SH-222bb/bebe Samsung
Here is the Microsoft Fix It error code
Assertion Failed!
Program:…
File: d:\w7rtm\ds\security\cryptoapi\pki\...\newstor.cpp
Line: 2131
Expression: pStore->dwState = = STORE_STATE_OPEN || pStore->dwState = = STORE_STATE_OPENING || pStore->dwState = = STORE_STATE_DEFER_CLOSING || pStore->dwState = = STORE_STATE_NULL
For information on how your program can cause an assertion failure, see the Visual C++ documentation on asserts
(Press Retry to debug the application – JIT must be enabled)
                Abort    Retry     Ignore
Abort
Closes the program
Retry
Repeats the error
Verbatim
Ignore
Closes the program
Nothing happens
Here is the Microsoft Genuine Advantage Diagnostic Report
Diagnostic Report (1.9.0027.0):
Windows Validation Data-->
Validation Code: 0
Cached Online Validation Code: N/A, hr = 0xc004f012
Windows Product Key: *****-*****-*****-*****-8C7YB
Windows Product Key Hash: cezvXJ2/mUhIEFxJfWkZ3IN8EQQ=
Windows Product ID: 55041-146-2397786-86942
Windows Product ID Type: 6
Windows License Type: Volume MAK
Windows OS version: 6.1.7601.2.00010100.1.0.004
ID: {EBD85729-DBBB-479F-AB15-EBC0DDE0CC28}(1)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Enterprise
Architecture: 0x00000009
Build lab: 7601.win7sp1_rtm.101119-1850
TTS Error:
Validation Diagnostic:
Resolution Status: N/A
Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002
OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002
OGA Data-->
Office Status: 109 N/A
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3
Browser Data-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default Browser: c:\Program Files (x86)\Internet Explorer\iexplore.exe
Download signed ActiveX controls: Prompt
Download unsigned ActiveX controls: Disabled
Run ActiveX controls and plug-ins: Allowed
Initialize and script ActiveX controls not marked as safe: Disabled
Allow scripting of Internet Explorer Webbrowser control: Disabled
Active scripting: Allowed
Script ActiveX controls marked as safe for scripting: Allowed
File Scan Data-->
File Mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0x80070003]
File Mismatch: C:\Windows\system32\wat\npwatweb.dll[Hr = 0x80070003]
File Mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0x80070003]
File Mismatch: C:\Windows\system32\wat\watweb.dll[Hr = 0x80070003]
Other data-->
Office Details: <GenuineResults><MachineData><UGUID>{EBD85729-DBBB-479F-AB15-EBC0DDE0CC28}</UGUID><Version>1.9.0027.0</Version><OS>6.1.7601.2.00010100.1.0.004</OS><Architecture>x64</Architecture><PKey>*****-*****-*****-*****-BBBBB</PKey><PID>55041-146-2397786-86942</PID><PIDType>6</PIDType><SID>S-1-5-21-4234423899-2489109333-1931045272</SID><SYSTEM><Manufacturer>System
manufacturer</Manufacturer><Model>System Product Name</Model></SYSTEM><BIOS><Manufacturer>American Megatrends Inc.</Manufacturer><Version>1103</Version><SMBIOSVersion major="2" minor="7"/><Date>20120409000000.000000+000</Date></BIOS><HWID>CFBA3607018400F2</HWID><UserLCID>0409</UserLCID><SystemLCID>0409</SystemLCID><TimeZone>Pacific
Standard Time(GMT-08:00)</TimeZone><iJoin>0</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM/><GANotification/></MachineData><Software><Office><Result>109</Result><Products/><Applications/></Office></Software></GenuineResults> 
Spsys.log Content: 0x80070002
Licensing Data-->
Software licensing service version: 6.1.7601.17514
Name: Windows(R) 7, Enterprise edition
Description: Windows Operating System - Windows(R) 7, VOLUME_MAK channel
Activation ID: 9abf5984-9c16-46f2-ad1e-7fe15931a8dd
Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 55041-00172-146-239778-03-1033-7601.0000-2252012
Installation ID: 000792957432055771547065313840421702569731971164600080
Processor Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use License URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product Key Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial Product Key: 8C7YB
License Status: Licensed
Remaining Windows rearm count: 5
Trusted time: 8/12/2012 5:47:25 PM
Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: N/A
HealthStatus: 0x0000000000000000
Event Time Stamp: N/A
ActiveX: Not Registered - 0x80040154
Admin Service: Not Registered - 0x80040154
HealthStatus Bitmask Output:
HWID Data-->
HWID Hash Current: OAAAAAEAAgABAAEAAgACAAAABAABAAEAHKJu3XDSdMRkx4ieoGkwung0ipvkrmTRDIsORc6qNCE=
OEM Activation 1.0 Data-->
N/A
OEM Activation 2.0 Data-->
BIOS valid for OA 2.0: yes, but no SLIC table
Windows marker version: N/A
OEMID and OEMTableID Consistent: N/A
BIOS Information:
  ACPI Table Name           OEMID Value     OEMTableID Value
  APIC                                    ALASKA                               
A M I
  FACP                                   ALASKA                               
A M I
  HPET                                    ALASKA                               
A M I
  MCFG                                 ALASKA                               
OEMMCFG.
  SSDT                                    AMICPU                              
PROC
Scan Now Results
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation.  All rights reserved.
C:\Windows\system32>sfc /scannow
Beginning system scan.  This process will take some time.
Beginning verification phase of system scan.
Verification 100% complete.
Windows Resource Protection did not find any integrity violations.
C:\Windows\system32>

Thank you for your valuable time.
I have performed the Chkdsk and the memory Diagnostic tool as per the suggestions.
The Memory Tool did not find anything amiss.
As per another thread I am going to try flashing the bios as well with the updates.
Following are the Chkdsk results.
Are there any other suggestions?
Chkdsk Results
Checking file system on C:
The type of the file system is NTFS.
A disk check has been scheduled.
Windows will now check the disk.                        
CHKDSK is verifying files (stage 1 of 5)...
  89600 file records processed.                               
          File verification completed.
  221 large file records processed.                                     
0 bad file records processed.                                       
1596 EA records processed.                                             
44 reparse records processed.                                      
CHKDSK is verifying indexes (stage 2 of 5)...
  131874 index entries processed.                                        
Index verification completed.
  0 unindexed files scanned.                                           0
unindexed files recovered.                                       CHKDSK
is verifying security descriptors (stage 3 of 5)...
  89600 file SDs/SIDs processed.                                        
Cleaning up 36 unused index entries from index $SII of file 0x9.
Cleaning up 36 unused index entries from index $SDH of file 0x9.
Cleaning up 36 unused security descriptors.
Security descriptor verification completed.
  21138 data files processed.                                           
CHKDSK is verifying Usn Journal...
  36120296 USN bytes processed.                                            
Usn Journal verification completed.
CHKDSK is verifying file data (stage 4 of 5)...
  89584 files processed.                                                
File data verification completed.
CHKDSK is verifying free space (stage 5 of 5)...
  476262075 free clusters processed.                                        
Free space verification is complete.
Windows has checked the file system and found no problems.
1953410047 KB total disk space.
  48065140 KB in 61610 files.
     43468 KB in 21139 indexes.
         0 KB in bad sectors.
    253139 KB in use by the system.
     65536 KB occupied by the log file.
1905048300 KB available on disk.
      4096 bytes in each allocation unit.
 488352511 total allocation units on disk.
 476262075 allocation units available on disk.
Internal Info:
00 5e 01 00 ef 42 01 00 ef 95 02 00 00 00 00 00  .^...B..........
e3 00 00 00 2c 00 00 00 00 00 00 00 00 00 00 00  ....,...........
6d 00 75 00 69 00 00 00 00 00 00 00 00 00 00 00  m.u.i...........
Windows has finished checking your disk.
Please wait while your computer restarts.

Similar Messages

  • My laptop has been stolen with Elements installed, can this licence be transferred to my new laptop?

    My laptop has been stolen with Elements installed, can this licence be transferred to my new laptop?

    Hello Alex,
    in addition to John's hint: Nevertheless it could be of interest whether you can have multiple users or computers.
    Again and again refers Adobe on this page:  http://helpx.adobe.com/creative-cloud/help/install-apps.html  >>> How many computers can I install on >>> You may install software on up to two computers. These two computers can be Windows, Mac OS, or one each.
    On the other hand, you could have a look here: http://www.adobe.com/products/cs6/faq.html
    Good luck!
    Hans-Günter

  • Validating error with JAXP

    i wrote a small app that read a COLLADA instance document and convert it to a html document. First I wrote some xsl stylesheets and now I'm using a JAXP DOM parser to parse the instance document and a JAXP xslt transformer to perform the transformation.
    When I use a non-validating parser it seems all work well but when i try to use a validating parser i get this message error:
    org.xml.sax.SAXParseException: src-resolve: Cannot resolve the name 'xml:base' to a(n) 'attribute declaration' component.
    What does it mean?
    When I'm at my home pc,I get the error above but when I'm at university lab pc I don't get any error. WHY!? I'm using the same files.
    Thx for your help

    i'm using jdk 1.5.0_11 and here is my java code.
    import javax.xml.parsers.DocumentBuilder;
    import javax.xml.parsers.DocumentBuilderFactory;
    import javax.xml.parsers.FactoryConfigurationError;
    import javax.xml.parsers.ParserConfigurationException;
    import org.xml.sax.SAXException;
    import org.xml.sax.SAXParseException;
    import org.w3c.dom.Document;
    import org.w3c.dom.DOMException;
    // For JFileChooser
    import javax.swing.*;
    // For write operation
    import javax.xml.transform.Transformer;
    import javax.xml.transform.TransformerException;
    import javax.xml.transform.TransformerFactory;
    import javax.xml.transform.TransformerConfigurationException;
    import javax.xml.transform.dom.DOMSource;
    import javax.xml.transform.stream.StreamSource;
    import javax.xml.transform.stream.StreamResult;
    import java.io.*;
    public class StylizerMio2 {
        // Global value so it can be ref'd by the tree-adapter
        static Document document;
        // Constants you'll use when configuring the factory
        static final String JAXP_SCHEMA_LANGUAGE="http://java.sun.com/xml/jaxp/properties/schemaLanguage";
        static final String W3C_XML_SCHEMA="http://www.w3.org/2001/XMLSchema";
         //Constants used to specify the schema in the application
         static final String schemaSource="COLLADASchema_141.xsd";
         static final String JAXP_SCHEMA_SOURCE="http://java.sun.com/xml/jaxp/properties/schemaSource";
        public static void main(String[] argv) {
            /*if (argv.length != 2) {
                System.err.println("Usage: java StylizerMio stylesheet xmlfile");
                System.exit(1);
            // Generating a parser
            DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
             //Configure the factory to generate a namespace-aware,validating parser
            factory.setValidating(true);  
            factory.setNamespaceAware(true);
             try{
                  factory.setAttribute(JAXP_SCHEMA_LANGUAGE, W3C_XML_SCHEMA);
              // Associate a document with a schema
              factory.setAttribute(JAXP_SCHEMA_SOURCE, new File(schemaSource));
             catch (IllegalArgumentException x) {
                  // Happens if the parser does not support JAXP 1.2
                  x.printStackTrace();
            // Associating the document with the schema
            try {
              JFileChooser chooser = new JFileChooser();
            ExampleFileFilter daeFilter = new ExampleFileFilter();
            daeFilter.addExtension("dae");
            daeFilter.setDescription("documenti istanza COLLADA");
            chooser.setFileFilter(daeFilter);
            chooser.setCurrentDirectory(new File("."));
              int returnVal = chooser.showOpenDialog(null);
              if(returnVal == JFileChooser.APPROVE_OPTION) {
              System.out.println("You chose to open this file: " +
                   chooser.getSelectedFile().getName());
                File stylesheet = new File("trasformazione.xsl");
              //"Moon Buggy/lunar_vehicle_tris.dae"
                File datafile = chooser.getSelectedFile();
                DocumentBuilder builder = factory.newDocumentBuilder();
              //Handling validation errors
              builder.setErrorHandler(
              new org.xml.sax.ErrorHandler(){
                   // ignore fatal errors (an exception is garaunteed)
                   public void fatalError(SAXParseException exception)
                        throws SAXException{}
                             //treat validation errors as fatal
                             public void error(SAXParseException e)
                                  throws SAXParseException
                                  throw e;
                             // dump warnigs too
                             public void warning(SAXParseException err)
                                  throws SAXParseException
                                  System.out.println("** Warning"
                                  + ", line " + err.getLineNumber()
                                  + ", uri " + err.getSystemId());
                                  System.out.println("   " + err.getMessage());
                document = builder.parse(datafile);
                // Use a Transformer for output
                TransformerFactory tFactory = TransformerFactory.newInstance();
                StreamSource stylesource = new StreamSource(stylesheet);
                Transformer transformer = tFactory.newTransformer(stylesource);
                DOMSource source = new DOMSource(document);
                // SaveDialogue JFileChooser
                ExampleFileFilter htmlFilter = new ExampleFileFilter();
                htmlFilter.addExtension("html");
                htmlFilter.setDescription("documento html");
                chooser.setFileFilter(htmlFilter);
                 chooser.showSaveDialog(null);
                  //"Moon Buggy/lunar_vehicle_tris.html"
                File htmlFile= chooser.getSelectedFile();
                StreamResult result = new StreamResult(htmlFile);
                transformer.transform(source, result);
            } catch (TransformerConfigurationException tce) {
                // Error generated by the parser
                System.out.println("\n** Transformer Factory error");
                System.out.println("   " + tce.getMessage());
                // Use the contained exception, if any
                Throwable x = tce;
                if (tce.getException() != null) {
                    x = tce.getException();
                x.printStackTrace();
            } catch (TransformerException te) {
                // Error generated by the parser
                System.out.println("\n** Transformation error");
                System.out.println("   " + te.getMessage());
                // Use the contained exception, if any
                Throwable x = te;
                if (te.getException() != null) {
                    x = te.getException();
                x.printStackTrace();
            } catch (SAXException sxe) {
                // Error generated by this application
                // (or a parser-initialization error)
                Exception x = sxe;
                if (sxe.getException() != null) {
                    x = sxe.getException();
                x.printStackTrace();
            } catch (ParserConfigurationException pce) {
                // Parser with specified options can't be built
                pce.printStackTrace();
            } catch (IOException ioe) {
                // I/O error
                ioe.printStackTrace();
        } // main
    }

  • Form validation error with mandatory fields and signature field

    Hello,
    I have seen that many other users are facing this issue, and they partialy do solve it with some workarounds. However, none of them applies to my case.
    I have a dynamic form (can be registration form for example) where user fills in bunch of fields. Some of them are mandatory.
    When user signs the form, I get our favourite validation error popups that filed this and this did not validate. (I think that the signature is not valid too once I get these errors).
    Workaround would be to set all fileds in the form as optional, however, the presign and postsign events work only in A9 and I need the form to be compatible with ver. 8 too.
    I also need to make sure, that they are not set to optional, if the signing fails, user clicks on cancel etc...
    Any ideas how to acomplish such a scenario?
    Thanks
    J.

    solved by myself.
    You have to install and configure the reader rights credentials mentioned in note 736902

  • Schema validation errors with Portal 10.3

    I downloaded, installed and configured a domain with an AdminServer and a ManagedServer for WebLogic Portal 10.3. When I start the AdminServer from NodeManager the following errors are reported:
    &lt;Sep 24, 2008 12:50:41 PM CDT&gt; &lt;Error&gt; &lt;Management&gt; &lt;BEA-141244&gt; &lt;Schema validation errors while parsing /opt/Oracle/WL10gR3/user_projects/domains/web/config/config.xml - Invalid xsi:type qname: 'wsrp:wsrp-identity-asserterType' in element realm@[http://www.bea.com/ns/weblogic/920/domain]&gt;
    &lt;Sep 24, 2008 12:50:41 PM CDT&gt; &lt;Error&gt; &lt;Management&gt; &lt;BEA-141244&gt; &lt;Schema validation errors while parsing /opt/Oracle/WL10gR3/user_projects/domains/web/config/config.xml - /opt/Oracle/WL10gR3/user_projects/domains/web/&lt;unknown&gt;:13:9: error: failed to load java type corresponding to t=wsrp-identity-asserterType@[http://www.bea.com/ns/wlp/90/security/wsrp]&gt;
    When I start the AdminServer using startWebLogic.sh there are no errors. Please advise.

    There is a special forum for WLP users:
    WebLogic Portal

  • Validation Errors with adf dialog

    Hi!
    We are using Oracle BC and ADF Faces.
    I'm having some validation problems with a adf dialog.
    The scenario is the following:
    An editing page.
    A field in this page has a LOV.
    The LOV has some search criteria, and a search button.
    When the button is clicked, the results appear on a table. The user selects one and the lov is closed.
    When filling the editing page the Lov is opened.
    When i don't put search criteria in the fields, no validation errors appear.
    If i put one or more search criterias, validations errors of the editing page appear.
    Why is this happening?
    Thanks.

    Please post a link to your site.
    Gramps

  • Validation errors with scripts when upgrading Calc Manager

    Hello All,
    I have just inherited an upgrade project that includes upgrading from 11.1.1.2 -->  11.1.1.3 -->  11.1.2.2.  After upgrading from 11.1.1.2 to 11.1.1.3 we ran into an issue when trying to validate scripts in Calc Manager.  The scripts are for HFM.  We are receiving the following error:
    Validation Error:  Error Code 403:  Error Message <DOCTYPE HTML PUBLIC " - //IETF//DTD HTML 2.0//EN">
    <html><head>
    <title>403 Forbidden</title>
    <p> You don;t have permission to access .hfm/calcman/convxmiltovbs.asp on this server
    Has anyone seen anything like this?  At this point we are really stuck!
    Thanks in advance for any assistance!

    Hi there,
    As far as I remember the upgrade from 11.1.1.2 to 11.1.1.3 does not require a configuration because you actually copy files from the patch to the actual folder (as far as I remember). However, I have just remembered that in one case of upgrading I had not access to the new folder that were created by the system. Why don't you review the security of the folder "hfm/calcman/"?
    Regards,
    Thanos
    < spam signature link removed by moderator >

  • Validation errors with Horizonatal Menu Bar

    Hello,
    I am having validation errors and i think it may be a root cause of so layout issues I am having with this feature in IE 6. Here is some of the issues I am having, I can't figure out what I need to change to make this code vaildate, any suggestions? Here are the validation errors I have recieved.
    Line 181,         Column 15:     ID "MenuBar1" already defined      <ul id="MenuBar1" class="MenuBarHorizontal">

    An "id" is a unique identifier. Each time this attribute is used in a document       it must have a different value. If you are using this attribute as a hook for       style sheets it may be more appropriate to use classes (which group elements)       than id (which are used to identify exactly one element).
    Line 180,         Column 13:     ID "MenuBar1" first defined here    <ul id="MenuBar1" class="MenuBarHorizontal">
    Line 181,         Column 50:     document type does not allow element "ul" here; assuming missing "li" start-tag      <ul id="MenuBar1" class="MenuBarHorizontal">

    Line 184,         Column 10:     document type does not allow element "li" here; missing one of "ul", "ol", "menu", "dir" start-tag      <li><a href="index.html">home</a></li>

    The mentioned element is not allowed to appear in the context in which       you've placed it; the other mentioned elements are the only ones that       are both allowed there and can contain the element mentioned.       This might mean that you need a containing element, or possibly that       you've forgotten to close a previous element.
    One possible cause for this message is that you have attempted to put a       block-level element (such as "<p>" or "<table>") inside an       inline element (such as "<a>", "<span>", or "<font>").
    Line 185,         Column 10:     document type does not allow element "li" here; missing one of "ul", "ol", "menu", "dir" start-tag      <li><a href="scorpion.html" class="MenuBarItemSubmenu">products</a>

    The mentioned element is not allowed to appear in the context in which       you've placed it; the other mentioned elements are the only ones that       are both allowed there and can contain the element mentioned.       This might mean that you need a containing element, or possibly that       you've forgotten to close a previous element.
    One possible cause for this message is that you have attempted to put a       block-level element (such as "<p>" or "<table>") inside an       inline element (such as "<a>", "<span>", or "<font>").
    Line 195,         Column 10:     document type does not allow element "li" here; missing one of "ul", "ol", "menu", "dir" start-tag      <li><a class="MenuBarItemSubmenu" href="about.html">about </a>

    The mentioned element is not allowed to appear in the context in which       you've placed it; the other mentioned elements are the only ones that       are both allowed there and can contain the element mentioned.       This might mean that you need a containing element, or possibly that       you've forgotten to close a previous element.
    One possible cause for this message is that you have attempted to put a       block-level element (such as "<p>" or "<table>") inside an       inline element (such as "<a>", "<span>", or "<font>").
    Line 203,         Column 10:     document type does not allow element "li" here; missing one of "ul", "ol", "menu", "dir" start-tag      <li><a href="contact.html">contact </a></li>

    The mentioned element is not allowed to appear in the context in which       you've placed it; the other mentioned elements are the only ones that       are both allowed there and can contain the element mentioned.       This might mean that you need a containing element, or possibly that       you've forgotten to close a previous element.
    One possible cause for this message is that you have attempted to put a       block-level element (such as "<p>" or "<table>") inside an       inline element (such as "<a>", "<span>", or "<font>").
    Line 204,         Column 10:     document type does not allow element "li" here; missing one of "ul", "ol", "menu", "dir" start-tag      <li><a href="media.html">media</a></li>

    The mentioned element is not allowed to appear in the context in which       you've placed it; the other mentioned elements are the only ones that       are both allowed there and can contain the element mentioned.       This might mean that you need a containing element, or possibly that       you've forgotten to close a previous element.
    One possible cause for this message is that you have attempted to put a       block-level element (such as "<p>" or "<table>") inside an       inline element (such as "<a>", "<span>", or "<font>").
    Line 205,         Column 9:     end tag for "li" omitted, but OMITTAG NO was specified    </ul>

    You may have neglected to close an element, or perhaps you meant to        "self-close" an element, that is, ending it with "/>" instead of ">".
    Line 181,         Column 7:     start tag was here      <ul id="MenuBar1" class="MenuBarHorizontal">
    Sense these are all related to the menubar I figure that is why it is giving me a box erxpanding issue.
    Thanks in advance,
    Cheers

    Please post a link to your site.
    Gramps

  • Cannot get new messages to download automatically and auto reply with out of office message have to manually check for new messages to get it to do this

    I am using Mozilla Thunderbird 31.3.0. I know how to create a message filter to set up an auto reply message, but cannot get Mozilla to automatically download new message and auto reply with the message in the filter unless I manually check for new messages, that is the only way to make it work. I have looked online and can't seem to find an answer to this particular issue. According to anything that I have found, I have the correct boxes checked in server settings: check for new messages at startup, automatically check for new messages, check for new messages every x amount of minutes. It's one thing to have to leave my computer on and Thunderbird open to make this work, but to have to manually check for new messages to get the auto response to work defeats the whole purpose of having an auto reply, as I use them for vacations, holidays, etc. I have wondered if there are any security settings that are causing this issue, but if so, I don't know what changes to make to them. Thanks in advance for any help. This is driving me crazy.

    I do find it a bit odd that Thunderbird is not getting mail on schedule, perhaps you have an add-on or anti virus program that prevents that.
    Holding shift while you start Thunderbird will start with add-ons disabled to check if mail come automatically.
    Airmail is right though, use Verizons auto responder. This link might help with that http://www.verizon.com/support/residential/internet/highspeed/account+tools/email+tools/questionsone/85621.htm#
    You say that not having such a setting in Thunderbird is something that needs fixing. This idea comes on the whole because Outlook has such an option. what most people are not aware of it only works with Exchange server. There is no "vacation response" in server mail specifications so every server implements it differently.
    Just as all cars have a radiator, you can not take any radiator and just put it in, they are subtly different even though they perform the same purpose. Same goes for the various vacation responders, They perform the same purpose but they differ between email server software brands.
    Thunderbird leaves it to the server end to expose the functionality, as they are really the only ones who understand what they did. Outlook exposes the option and mostly greys it out.

  • Java 64-bit Windows 7 - Error with Tomcat Install

    Downloaded and ran jre-6u20-windows-i586-s.exe on a Win host (Dell PowerEdge R610 with 16 Core 2.27 GHz Intel Xeon) running Windows 7 64-bit. The website said if you're running a 64-bit Windows OS then download that file.
    When I run the command "java -version" it says,
    "C:\Users\plozanci>java -version
    java version "1.6.0_20"
    Java(TM) SE Runtime Environment (build 1.6.0_20-b02)
    Java HotSpot(TM) Client VM (build 16.3-b01, mixed mode, sharing)"
    I'm trying to install Apache Tomcat 6.0.26. Getting the error: "[206 javajni.c] [error] %1 is not a valid Win32 application."
    After searching the web, it looks like the Tomcat is looking for a 64-bit JRE but encountering a 32-bit version. I thought that the jre-6u20-windows-i586-s.exe file had the 32-bit & 64-bit versions. If this is true, how do I get Tomcat to use the right version?
    If its false, where is the 64-bit version for Windows 7?

    No. They are separate installers. The 32bit will run on a 64bit OS, but it is not 64bit. If you need the 64bit, you will need to download the 64bit installer.
    You will need: jre-6u20-windows-x64.exe
    Go: http://java.sun.com/javase/downloads/index.jsp
    select: Download JRE
    select: Windows x64
    Happy downloading!
    -Roger

  • Error with JAVA install on WAS 640 AIX Oracle

    Hi All
    We are running AIX5.1 with Oracle
    I have successfully installed the ABAP central and DB instances, and am trying to install a JAVA stack.
    I am getting the following error when installing the JAVA stack:
    "CJS-00030  Assertion failed: lsnrctl: Parameter dbHome has to be a valid ORACLE_HOME"
    I have checked the environment variables as user oraj2e, and ORACLE_HOME is set to /oracle/J2E/920_64. I have checked the listener.ora file for user oraj2e, and ORACLE_HOME is set to /oracle/J2E/920_64.
    This all seems correct to me.
    Can anybody please help.

    Dear All,
    We are trying to install WAS 6.40 on AIX .
    Error message
    "CJS-00030 Assertion failed: lsnrctl: Parameter dbHome has to be a valid ORACLE_HOME"
    we have set the ORACLE_HOME,Still its not working
    Please any one help us to solve this problem
    Thanks in advance.
    Best Regards

  • Error with re-installing Illustrator. Exit code: 7 ? Help!

    Hello,
    I had problems opening my Illustrator-program (from Adobe Creative Suite 5, Design Premium) as it kept on opening a new file window, and not the program itself. I could keep on opening this file-window eternally, not in any way could i get in to the program, so I chose to un-install the Illustrator - not the whole package.
    Now when i try to re-install Illustrator in Adobe Application manager, it ends up with saying that a mistake happened and:
    "Exit Code: 7
    -------------------------------------- Summary --------------------------------------
    - 1 fatal error(s), 3 error(s), 0 warning(s)
    ERROR: Found payload conflicts and errors:
    ERROR:  - Adobe Flash Catalyst CS5 depends on Flash Player to be installed.
    ERROR:  - Adobe Flash CS5 depends on Flash Player to be installed.
    FATAL ERROR: Conflicts were found in the selected payloads. Halting installation.
    I have installed on two computers, and I don't know if Adobe counts this as my third time installing and therefore wont let me? Even though it's on the same computer, name user and everything.
    Now: Can anybody help me getting back the program?
    I'm not really good with computers, and I cannot find a direct line to Adobe, so I hope someone can help
    Best, Julie

    Sorry, but this is not the right answer, it has nothing to do with lightroom 5.
    It's Adobe Illustrator and is has been working 7 days ago, I can't see why it has something to do with the hardware, my mac is super new.
    it's something else.

  • Error with Java WebStart Signed Jars on 1.6.0_19's new Mixed  Code

    All,
    First, we have a valid code signing certificate/keystore from Thawte that works for signing webstart jars as of update 18. For some reason, if you run our webstart application on update 19 JRE, the runtime believes that some of the jars are not signed and some are. Even though we create and sign the jars in the exact same way and after inspecting the jar the JRE believes are not signed they have the necessary signing entries/files in the manifest folder. Not sure why the signing process would work for some of our jars and not for others. There is nothing really all that different.
    So, because the JRE believes some of the jars are not signed the new security warning "...contains both signed and unsigned code." pops up ( [Error Description|http://java.com/en/download/help/error_mixedcode.xml] ). If I press yes, then I get the following exception.
    java.lang.SecurityException: trusted loader attempted to load sandboxed resource from https://path-to-our.jar
         at com.sun.deploy.security.CPCallbackHandler$ParentCallback.check(Unknown Source)
         at com.sun.deploy.security.CPCallbackHandler$ParentCallback.access$1400(Unknown Source)
         at com.sun.deploy.security.CPCallbackHandler$ChildElement.checkResource(Unknown Source)
         at com.sun.deploy.security.DeployURLClassPath$JarLoader.checkResource(Unknown Source)
         at com.sun.deploy.security.DeployURLClassPath$JarLoader.getResource(Unknown Source)
         at com.sun.deploy.security.DeployURLClassPath.getResource(Unknown Source)
         at java.net.URLClassLoader$1.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
         at java.net.URLClassLoader.findClass(Unknown Source)
         at com.sun.jnlp.JNLPClassLoader.findClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at main.JwsMain.main(JwsMain.java:32)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
         at java.lang.reflect.Method.invoke(Unknown Source)
         at com.sun.javaws.Launcher.executeApplication(Unknown Source)
         at com.sun.javaws.Launcher.executeMainClass(Unknown Source)
         at com.sun.javaws.Launcher.doLaunchApp(Unknown Source)
         at com.sun.javaws.Launcher.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)If I press "no" I get the following exception (I get this exception if I try to run our WebStart application with no signed jars as well, no warnings about missing certs, just straight to error)
    java.lang.NullPointerException
         at com.sun.deploy.cache.CachedJarFile.findMatchingSignerIndices(Unknown Source)
         at com.sun.deploy.cache.CachedJarFile.entryNames(Unknown Source)
         at com.sun.deploy.cache.DeployCacheJarAccessImpl.entryNames(Unknown Source)
         at com.sun.deploy.security.CPCallbackHandler.assertTrust(Unknown Source)
         at com.sun.deploy.security.CPCallbackHandler.access$700(Unknown Source)
         at com.sun.deploy.security.CPCallbackHandler$ParentCallback.check(Unknown Source)
         at com.sun.deploy.security.CPCallbackHandler$ParentCallback.access$1400(Unknown Source)
         at com.sun.deploy.security.CPCallbackHandler$ChildElement.checkResource(Unknown Source)
         at com.sun.deploy.security.DeployURLClassPath$JarLoader.checkResource(Unknown Source)
         at com.sun.deploy.security.DeployURLClassPath$JarLoader.getResource(Unknown Source)
         at com.sun.deploy.security.DeployURLClassPath.getResource(Unknown Source)
         at java.net.URLClassLoader$1.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
         at java.net.URLClassLoader.findClass(Unknown Source)
         at com.sun.jnlp.JNLPClassLoader.findClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at main.JwsMain.main(JwsMain.java:32)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
         at java.lang.reflect.Method.invoke(Unknown Source)
         at com.sun.javaws.Launcher.executeApplication(Unknown Source)
         at com.sun.javaws.Launcher.executeMainClass(Unknown Source)
         at com.sun.javaws.Launcher.doLaunchApp(Unknown Source)
         at com.sun.javaws.Launcher.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)Does anyone know why this would be happening? It only occurs with the new update. We use the same keystore and process for signing all of our jars so it really doesn't make since why some of them work and some of them don't. Also, our JNLP is correct or it wouldn't work in update 18.
    Edit: We've tried it on Windows XP SP3 and compiled the code using update 18 and used jarsigner both from 18 and 19 with same results.
    Edited by: chenthor on Apr 1, 2010 8:44 AM
    Edited by: chenthor on Apr 1, 2010 8:51 AM

    Hi All,
    So we've been battling this bug for a year or so now, and I've come up with a solution to the webstart bugs
    http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6967414
    http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6805618
    (see the bugs for more details)
    From what we can tell the bug stems from the way that the jar signers information is "cached" by webstart.
    When a jar is loaded by webstart, it is represented by a CachedJarFile instance. When loading and using classes the signature for the jar is verified. The signers used is the one that is stored in the CachedJarFile instances. These "signers" are stored as SoftReferences. SoftReferences are like WeakReferences, except that they only become eligible for garbage collection when there is a small amount of available heaps space remaining and that the object is only softly reachable. (That's a pretty crude description, but it will do for now)
    So what we found was happening is that when the JVM reached a certain heap size threshold and needed to allocate more heap, that these soft references (and hence the signers information) werebeing garbage collected. if you attempt to load a class after this you get the security error.
    So I came up with a hack to work around this. At application startup, iterate through all of the CachedJarFile objects on the classpath and create a hard reference to each of the signers info by putting them in a static list somewhere. From our tests this seems to work. (though with the intermittent nature of the problem, it has been hard to prove conclusively, though we've had some success repro-ing the issue, by reducing the intial heap size and using VisualVM to watch for heap expansions and forcing gc's)
    Below is the code for the hack, to run it just call JarSignersHardLinker.go() and it will do some sanity checks (running on webstart on java 1.6 update 19 or higher) before spawning a new thread to create hard refs for all signers info for all jars on the classpath.
    import java.io.IOException;
    import java.lang.ref.SoftReference;
    import java.lang.reflect.Field;
    import java.lang.reflect.InvocationTargetException;
    import java.lang.reflect.Method;
    import java.net.JarURLConnection;
    import java.net.URL;
    import java.net.URLConnection;
    import java.util.ArrayList;
    import java.util.Enumeration;
    import java.util.LinkedHashSet;
    import java.util.List;
    import java.util.Set;
    import java.util.jar.JarFile;
    * A utility class for working around the java webstart jar signing/security bug
    * see http://bugs.sun.com/view_bug.do?bug_id=6967414 and http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6805618
    * @author Scott Chan
    public class JarSignersHardLinker {
        private static final String JRE_1_6_0 = "1.6.0_";
         * the 1.6.0 update where this problem first occurred
        private static final int PROBLEM_JRE_UPDATE = 19;
        public static final List sm_hardRefs = new ArrayList();
        protected static void makeHardSignersRef(JarFile jar) throws java.io.IOException {
            System.out.println("Making hard refs for: " + jar );
            if(jar != null && jar.getClass().getName().equals("com.sun.deploy.cache.CachedJarFile")) {
                 //lets attempt to get at the each of the soft links.
                 //first neet to call the relevant no-arg method to ensure that the soft ref is populated
                 //then we access the private member, resolve the softlink and throw it in a static list.
                callNoArgMethod("getSigners", jar);
                makeHardLink("signersRef", jar);
                callNoArgMethod("getSignerMap", jar);
                makeHardLink("signerMapRef", jar);
    //            callNoArgMethod("getCodeSources", jar);
    //            makeHardLink("codeSourcesRef", jar);
                callNoArgMethod("getCodeSourceCache", jar);
                makeHardLink("codeSourceCacheRef", jar);
         * if the specified field for the given instance is a Softreference
         * That soft reference is resolved and the returned ref is stored in a static list,
         * making it a hard link that should never be garbage collected
         * @param fieldName
         * @param instance
        private static void makeHardLink(String fieldName, Object instance) {
            System.out.println("attempting hard ref to " + instance.getClass().getName() + "." + fieldName);
            try {
                Field signersRef = instance.getClass().getDeclaredField(fieldName);
                signersRef.setAccessible(true);
                Object o = signersRef.get(instance);
                if(o instanceof SoftReference) {
                    SoftReference r = (SoftReference) o;
                    Object o2 = r.get();
                    sm_hardRefs.add(o2);
                } else {
                    System.out.println("noooo!");
            } catch (NoSuchFieldException e) {
                e.printStackTrace();
                return;
            } catch (IllegalAccessException e) {
                e.printStackTrace();
         * Call the given no-arg method on the given instance
         * @param methodName
         * @param instance
        private static void callNoArgMethod(String methodName, Object instance) {
            System.out.println("calling noarg method hard ref to " + instance.getClass().getName() + "." + methodName + "()");
            try {
                Method m = instance.getClass().getDeclaredMethod(methodName);
                m.setAccessible(true);
                m.invoke(instance);
            } catch (SecurityException e1) {
                e1.printStackTrace();
            } catch (NoSuchMethodException e1) {
                e1.printStackTrace();
            } catch (IllegalArgumentException e) {
                e.printStackTrace();
            } catch (IllegalAccessException e) {
                e.printStackTrace();
            } catch (InvocationTargetException e) {
                e.printStackTrace();
         * is the preloader enabled. ie: will the preloader run in the current environment
         * @return
        public static boolean isHardLinkerEnabled() {
             boolean isHardLinkerDisabled = false;  //change this to use whatever mechanism you use to enable or disable the preloader
            return !isHardLinkerDisabled && isRunningOnJre1_6_0_19OrHigher() && isRunningOnWebstart();
         * is the application currently running on webstart
         * detect the presence of a JNLPclassloader
         * @return
        public static boolean isRunningOnWebstart() {
            ClassLoader cl = Thread.currentThread().getContextClassLoader();
            while(cl != null) {
                if(cl.getClass().getName().equals("com.sun.jnlp.JNLPClassLoader")) {
                    return true;
                cl = cl.getParent();
            return false;
         * Is the JRE 1.6.0_19 or higher?
         * @return
        public static boolean isRunningOnJre1_6_0_19OrHigher() {
            String javaVersion = System.getProperty("java.version");
            if(javaVersion.startsWith(JRE_1_6_0)) {
                //then lets figure out what update we are on
                String updateStr = javaVersion.substring(JRE_1_6_0.length());
                try {
                    return Integer.parseInt(updateStr) >= PROBLEM_JRE_UPDATE;
                } catch (NumberFormatException e) {
                    //then unable to determine updatedate level
                    return false;
            //all other cases
            return false;
          * get all the JarFile objects for all of the jars in the classpath
          * @return
         public static Set<JarFile> getAllJarsFilesInClassPath() {
              Set<JarFile> jars = new LinkedHashSet<JarFile> ();
             for (URL url : getAllJarUrls()) {
                 try {
                     jars.add(getJarFile(url));
                 } catch(IOException e) {
                      System.out.println("unable to retrieve jar at URL: " + url);
             return jars;
         * Returns set of URLS for the jars in the classpath.
         * URLS will have the protocol of jar eg: jar:http://HOST/PATH/JARNAME.jar!/META-INF/MANIFEST.MF
        static Set<URL> getAllJarUrls() {
            try {
                Set<URL> urls = new LinkedHashSet<URL>();
                Enumeration<URL> mfUrls = Thread.currentThread().getContextClassLoader().getResources("META-INF/MANIFEST.MF");
                while(mfUrls.hasMoreElements()) {
                    URL jarUrl = mfUrls.nextElement();
    //                System.out.println(jarUrl);
                    if(!jarUrl.getProtocol().equals("jar")) continue;
                    urls.add(jarUrl);
                return urls;
            } catch(IOException e) {
                throw new RuntimeException(e);
         * get the jarFile object for the given url
         * @param jarUrl
         * @return
         * @throws IOException
        public static JarFile getJarFile(URL jarUrl) throws IOException {
            URLConnection urlConnnection = jarUrl.openConnection();
            if(urlConnnection instanceof JarURLConnection) {
                // Using a JarURLConnection will load the JAR from the cache when using Webstart 1.6
                // In Webstart 1.5, the URL will point to the cached JAR on the local filesystem
                JarURLConnection jcon = (JarURLConnection) urlConnnection;
                return jcon.getJarFile();
            } else {
                throw new AssertionError("Expected JarURLConnection");
         * Spawn a new thread to run through each jar in the classpath and create a hardlink
         * to the jars softly referenced signers infomation.
        public static void go() {
            if(!isHardLinkerEnabled()) {
                return;
            System.out.println("Starting Resource Preloader Hardlinker");
            Thread t = new Thread(new Runnable() {
                public void run() {
                    try {
                        Set<JarFile> jars = getAllJarsFilesInClassPath();
                        for (JarFile jar : jars) {
                            makeHardSignersRef(jar);
                    } catch (Exception e) {
                        System.out.println("Problem preloading resources");
                        e.printStackTrace();
                    } catch (Error e) {
                         System.out.println("Error preloading resources");
                         e.printStackTrace();
            t.start();
    }

  • Boot Error with grub installed...no debug instructions

    * Quick Intro / About *
    Hello everybody... im new to linux in general and arch caught my eye since i have an interest in learning programming... i figured arch's documentation was better than that supplied for ubuntu since it's more in depth and has the core utilities needed to get a base system running with in-depth explanations (which i like). trust me when i say, i have read almost all of the arch documentation more than
    a few dozen times and have completed this successfully before...
    * My Problem *
    I installed my copy of Arch with the Core Utilities package and followed the wiki guides to the tee. i've done several test installations with VMware and Virtualbox OSE and decided to do it for real on my Toshiba Laptop Satellite l305d-s5895... all my hardware is currently supported by the majority of the Linux Distro's (i did my homework). I am attempting to do a dual boot with Arch and Windows
    the "/etc/rc.conf" file
    Localization -> default
    Hardware -> default
    Network ->
    HOSTNAME="myhostname"
      the "/etc/hosts" file is automatically adjusted during install
    eth0="dhcp"
    INTERFACES=(eth0)
    gateway="dhcp"
    ROUTES=(!gateway)
    Deamons -> default
    filesystem setup
    win7 -> hd0,0 sda1 primary
    arch -> hd0,1 sda2 primary
    swap -> hd0,1 sda5 logical
    cdrom -> sbd (device is auto-mounted)
    /dev/sda (MBR / Single HDD Device)
    After Grub Configuration ...these are my options to select for grub mount point
    /dev/sda
    /dev/sbd
    /dev/sda
    /dev/sda1
    /dev/sda2
    /dev/sda5
    /dev/sbd
    I always select /dev/sda at the very top of the list...
    the "/boot/grub/menu.lst" file
    Gen Config ->
    timeout 5
    default 0
    color light-blue/black light-cyan/blue
    Boot sections ->
    # (0) Arch Linux
    title KDM
    root (hd0,1)
    kernel /boot/vmlinuz26 root=/dev/sda2 ro vga=ask
    initrd /boot/kernel26.img
    # (1) Fallback (default settings)
    # (2) Windows
    title Windows 7
    rootnoverify (hd0,0)
    #makeactive #win7 does not require this
    chainloader +1
    * the Error I recieve *
    At boot and during reboot, unless i have a boot medium, this is what i am prompted with...
    Intel UNDI, PXE-2.1 (build 082)
    Copyright (C) '97 - '00 Intel Corp.
    For Realtek RTL8101E/8102E PCI-E Ethernet Controller v1.05 (071227)
    PXE-E61: Media test failure, check cable
    PXE-M0F: Exiting PXE ROM.
    No bootable device -- insert boot disk and press any key
    any help would be amazing! i have no idea why at boot the computer searches for a network connection
    instead of the GRUB! >.<
    i am able to boot however with the Arch Live Disc and access my filesystem for both Arch and Windows 7
    and resume normal use!

    well, just as an update... i believe it is a software issue... i wiped my whole HDD with gparted and set the partitions with Arch Live Core Install medium and GRUB worked perfectly... i created an NTFS partition as well for Win 7... hopefully the Win Installer wont overwrite GRUB and use its own bootloader. i was re-reading an area of the wiki and found...
    - GRUB must be installed on the MBR (first sector of the hard disk), or the first partition of the first storage device to be recognized by most BIOS's.
    source: https://wiki.archlinux.org/index.php/Gr … stallation
    hopefully i can just reinstall GRUB if needed with the Live Disc and i can boot win7 and arch like that...
    if an suggestions, or comments, please...would be nice.
    Last edited by xovertheyearsx (2011-03-11 05:23:05)

  • HT201269 My iphone5 with iOS7 installed was stolen. I now got a new iPhone5, but it has iOS6 installed. So I cannot set it up restoring from iCloud. If I set it up as a new iPhone, it asks that I sign in using my Apple ID. What should I do?

    I need to set up a new iPhone5 after my previous one was stolen. The new phone has iOS6 installed, the stolen one has iOS7 installed. So I cannot set it up using the Cloud. If I do a new setup, it asks me to sign in using my Apple ID. Will this not override my backed up data, preventing me from restoring my data on my new phone? I cannot install iOS7 untill the new phone has been set up. What am I to do?

    How to sign in using the Apple ID that I initially used to set up the computer? I cant update my iPhoto and download pictures from Iphone :((
    Try to remember any AppleID you ever may have used.
    In the AppStore Application go to the "Store" menu.
    It will show you the AppleiD You are currently using (in the last menu entry "View my account ....".
    Use the "Sign out" command and sign in with any AppleID you ever used, ten check the "Purchases" tab of the App Store, if that will show the bundled apps.
    And also, where are my pictures stored in my Air?
    If you have used iPhoto to download your pictures, the photos will be stored in the iPhoto Library, a package, that is stored in the folder "Pictures" in your Home folder.
    Terence Devlin has written some very useful user tips, that describe the iPhoto Library:  See the links below:
    iPhoto and File Management
    How to Access Files in iPhoto
    Exporting From iPhoto

Maybe you are looking for

  • How am I using so much data with iPhone 5?

    Got the iPhone 5 Friday evening and by Tuesday afternoon I went over 5 gb of data usage. That's 5gb in 4 days.  How is this possible?

  • Error reports converting a vi from LV8 to LV7.1

    Neatly working VI in LV8.0 for some reason I am converting it into earlier version of LV7.1. When I opened from LV7.1, I got the error message (report attached). Hope somebody help me out to avoid coding from scratch. Kousy

  • TREX-In SRM Catalog

    Dear experts, Can any one explain me what exactly the role of TREX in catalog management. I never worked on SRM open catalog, now in our client we need to setup a catalog.  Cany any one pleae share their knowledge in this area. Regards, Krish

  • Merging two rpds in OBIEE 11g

    Hi, To merge two RPDs in OBIEE 11g, do I need to have both RPDs online? What are the pre requecities? Do I need to modify ini file to mention those RPDs.? Please tell me the steps involved. Thanks and Regards Santosh

  • IPad will connect to PC but will not turn on

    Hello, I have a 64GB 3rd Generation iPad that suddenly decided to not turn on anymore. I charged it last night as I always do and today when I tried using it, nothing. I thought maybe it just didn't get charged, but no it does absolutely nothing, eve