Validation failed when logging in to iTunes U lecture

A student is having problems logging in to iTunes U lectures. He said he gets a validation failed message. Any suggestions? Thank you.

On the Dock at the bottom of your screen, right click on the iTunes icon, go to "Options", and make sure "Open at Login" is unchecked.

Similar Messages

I have connected my iphone5 to update the ios8 sofware, now it is stuck in the plug-n screen indicating itunes. the phone is not getting recognized when logged in to itunes on the computer

i have connected my iphone5 to update the ios8 sofware, now it is stuck in the plug-n screen indicating itunes. the phone is not getting recognized when logged in to itunes on the computer

Try this:
Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Confirm that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support.
copied from Resolve iOS update and restore errors

List data validation failed when creating a new list item but does not fail when editing an existing item

Dear SharePoint Experts,
Please help.
Why does my simple formula work in Excel but not-work in SharePoint?
Why does this formula...
=IF([Request Type]="Review",(IF(ISBLANK([Request Date]),FALSE,TRUE)),TRUE)
...work in Excel but fail when I try to use it in SharePoint?
The intent of this formula is the following...
If the field "Request Type" has the value "Review" and the field "Request Data" is blank then show FALSE, otherwise show TRUE.
SharePoint saves the formula, but when a list item is saved where the formula is implemented, (under List Settings, List Validation), SharePoint does not, say anything other than that the formula failed.
Note that the "list data validation failed" error only happens when I am creating a new item-- the formula above works just fine when one is trying to Save on the edit form.
Can you help?
Thanks.
-- Mark Kamoski

Dear Jason,
I appreciate your efforts.
However, it seems to me that this statement of yours is not correct...
"If it meet the validation formula, then you can new or edit the item, otherwise, it will throw the 'list data validation failed' error, it is by design".
I believe this is NOT the answer for the following reasons.
When I create a new item and click Save, the validation error is "list data validation failed".
When I edit an existing item and click Save, the validation error is "my custom error message" and this is, I believe, the way it needs to work each time.
I think, at the core, the error my formula does not handle some condition of null or blank or other default value.
I tried a forumla that casts the date back to a string, and then checked the string for a default value, but that did not work.
I tried looking up the Correlation ID in the ULS when "list data validation failed" occurs, but that gave no useful information because, even though logging was set to Verbose, the stack trace in the error log was truncated and did not given any
good details.
However, it seems to me that SharePoint 2013 is not well-suited for complex validation rules, because...
SharePoint 2013 list-level validation (NOT column-level validation) allows only 1 input for all the multi-field validation formulas in a given list-- so, if I had more than 1 multi-field validation rule to implement on a given list, it would need to be packed
into that single-line-of-code forumla style, like Excel does. That is not practice to write, debug, or maintain.
SharePoint 2013 list-level validation only allows 1 block of text for all such multi-field validation rules. So that will not work because I would have something like "Validation failed for one or more of the following reasons-- withdrawal cannot exceed
available balance, date-of-birth cannot be after date-of-death,... etc". That will not work for me.
The real and awesome solution would simply be enhancing SP 2013 so that column-level validation forumlas are able to reference other columns.
But, for now, my workaround solution is to use JavaScript and jQuery, hook the onclick handler on the Save button, and that works good. The only problem, is that the jQuery validation rules run before any of the column-level rules created with OOTB
SP 2013. So, in some cases, there is an extra click for the enduser.
Thanks,
Mark Kamoski
-- Mark Kamoski

Why do I get connection failed when logging in on app store on wireless, but Wired LAN works fine?

I've been having the same issue as many other people. On OSX Lion with latest updates as of 3/20/2012. Tried deleting .plist files, checking keychain access and even reset keychain. I still get the error of Connection Failed when trying to download updates or a new app from the app store.
I also can't connect to the iTunes "Account" area. It produces an error that the request failed (-1200)
I finally decided to try a wired connection instead of my wireless. Now it works great! So I removed my wireless network and re-added it. Back to square one. Work around for now is fine, but I should be able to use this over wireless, too!
I just now tested connecting to a different wireless network (EVO Hotspot) and it worked fine. So it's something specific to my office wireless network. Nothing changed on our firewall (I'm the administrator). It just stopped working.
Anthony

Hi ...
Perhaps there's something that you haven't tried here > Troubleshooting Wi-Fi issues in OS X Lion

"BPM-70830: Deployment validation failed" when deploying from composer

Hi BPM developers,
I am trying to deploy a BPM project based on a template to Oracle BPM Suite 11.1.1.6.0 running in SOA & BPM Development VM and I get the following error :
“BPM-70830: Deployment validation failed. Cause: An unexpected error has occurred during deployment validation”
Checking the project with the Validate button returns no problem.
The weblogic log shows the following error
<Oct 30, 2012 6:13:51 AM PDT> <Error> <oracle.bpm.composer.beans.toolbar.SarExportDialogBean> <BEA-000000> <
java.lang.NullPointerException
at oracle.soa.scac.ValidateComposite.checkInterfaceInWsdlManager(ValidateComposite.java:388)
at oracle.soa.scac.ValidateComposite.validateComponentTypeReferences(ValidateComposite.java:980)
at oracle.soa.scac.ValidateComposite.validateComponentTypeServicesReferences(ValidateComposite.java:1012)
at oracle.soa.scac.ValidateComposite.doValidation0(ValidateComposite.java:502)
at oracle.soa.scac.ValidateComposite.doValidation(ValidateComposite.java:481)
at oracle.bpm.deployment.impl.ScacDeploymentService.validateProject(ScacDeploymentService.java:223)
at oracle.bpm.deployment.impl.ScacDeploymentService.generateSarFile(ScacDeploymentService.java:85)
at oracle.bpm.deployment.impl.ScacDeploymentService.deploy(ScacDeploymentService.java:150)
at oracle.bpm.pml.service.impl.ComposerMetadataServiceImpl.deployProject(ComposerMetadataServiceImpl.java:355)
at oracle.bpm.composer.service.ProjectDeploymentService.deployProject(ProjectDeploymentService.java:157)
at oracle.bpm.composer.service.ProjectDeploymentService.deploySelectedProject(ProjectDeploymentService.java:71)
at oracle.bpm.composer.beans.toolbar.SarExportDialogBean.deployProject(SarExportDialogBean.java:635)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597) .....
By the way, I have been following the script from the "Getting Started with Oracle BPM Suite 11gR1" book if anyone stumbled upon the same issue.
TIA
Yiannis Tsesmelis

You're right, I restarted the server again and again...
I have just opened the sr in metalink, it has been confirmed as a bug. Unfortunately there's no way to workaround. What I can do now is waiting for the solution.

VALIDATION FAILED when setting up mobileme account on ipad

I get this same problem when trying to setup my "Find Iphone" on my ipad.
I first try to add my mobileme account as follows: settings > mail, contacts calendars > mobile me
when I put in my account login and password, i get the following response: "VALIDATION FAILED: the identity of this ipad could not be validated."
Please advise. Thanks!

I get this same problem when trying to setup my "Find Iphone" on my ipad.
I first try to add my mobileme account as follows: settings > mail, contacts calendars > mobile me
when I put in my account login and password, i get the following response: "VALIDATION FAILED: the identity of this ipad could not be validated."
Please advise. Thanks!

Bug in Tabular form Not Exist Validation, fails when creating multiple rows

Hi,
I have a Not Exist validation created for a Tabular form:
select 1 from my_table where col1 = :col1 and col2 = :col2Execution State: For created and Modified Rows
which is working fine when a row already there in DB
and I am trying to enter a new row with same data.
but when there's no data and I enter two rows with same data, validation does not fire, first row should allowed to enter
but for second row it should give error that data already exists, which is not happening.
for example,
let's say I have a row in DB with: 1, 2, 3
when I try to add a new row with same data ie. 1, 2, 3 validation fires and showing error, which is fine.
but let's say there's no data in DB and I am entering two rows with:
1, 2, 3
1, 2, 3
validation is not working this time, it is allowing to enter both the rows.
do I need to create a manual validation for this or what?
Apex 4.1.1.00.23
Regards,
Tauceef
Edited by: Tauceef on Dec 6, 2012 10:09 AM
Edited by: Tauceef on Dec 6, 2012 11:22 AM
Edited by: Tauceef on Dec 6, 2012 11:27 AM

Hello Tauceef,
>> Now I got it, I was under impression that it will validate one by one row before insertion,
>> but it's going to check all the rows first, then do the insertion.
Just to clear things up, the APEX engine works exactly as you describe, but this is your problem.
The APEX engine do check\validate all the rows first, one row at a time, and only if all the rows pass validation, the DML processes kick in. The DML processes work on the entire Tabular Form record set (per page view, of course).
In order for your type of validation to work (the one that queries the database), as you want it, the validation and DML actions have to run together, row by row. This is not how things work, because it’s less efficient/optimal, and may lead to a situation where a certain row can fail validation, but other row(s) already been inserted/updated/deleted into/from the database. This could be a very tricky situation.
Vikram has suggested to rely on a database constraint, and control the APEX error message. This is possible, although I’m not sure that in this case, the Tabular Form will retain all the user changes, in case of validation error. You should check it.
Another option, which Marc hinted on, is to manipulate the G_Fxx arrays. In your case, you should loop through the new rows, compute their MD5, and make sure that all the rows have different MD5 values. This is on top of the current validation, which makes sure that the new rows do not already exist in the database.
Regards,
Arie.
&diams; Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.
&diams; Author of Oracle Application Express 3.2 – The Essentials and More

Play iTunes with iPhone Remote fails when new version of iTunes

When there is a new version of iTunes, a dialog is presented by the application. This dialog seems to prevent one from playing iTunes via the iPhone Remote app (at least if using AirPlay speakers).
Just a tip.
Another #FAIL for iTunes (having upgrade dialogs, which can appear at any time, ruin the functionality of the application is just lame)
Message was edited by: SwedePetter

Right, that checkbox was enabled by mistake - thanks.
Still a pretty silly stopper, if my diagnosis was correct.

Validation Failed when creating Web Service Proxy

Hi
I am having trouble creating a web service proxy in JDeveloper (11.1.1.3). When I enter the endpoint URL (which is a https WSDL file). I get the following error:
No WSDL document could be found at https://host:port/.../.././...wsdl.
I can open the WSDL in SOAP UI and it accesses it fine and I can call the service within.
When I put it in a browser I need to enter the authentication details before I can view the WSDL.
But I can't get to the next step in the Web Service Proxy wizard, I've had a look in the threads before an couldn't find any help.
Is there anyone who can help me with this?
Regards
Saheem

Thanks John but unfortunatly that didn't help.
I removed the proxy but the WSDL was still not found I also added the host to the Proxy exceptions list and switched the proxy back on but this did not work either.
I also tried the method in the link you provided. But I get an error when attempting to create a Web Service Dasta Control too. The error I get here is:
DCA-40002: The WSDL document is invalid due to the following reason: WSDl Exception: faultCode=PARSER_ERROR: Failed to read wsdl file at: "https://../../..wsdl", caused by javax.net.ssl.SSLHandshakeException. :...........

Apple Support Communities permalinks fail when logged in (work only whilst signed out)

Example
https://discussions.apple.com/message/15351904#15351904 should present a reply by Elizabeth Vetter on the third page of a discussion.
Bug: the link presents the opening post at the top of first page.
Only if I sign out does the permalink present the required post.
My current preference is flat discussion, threaded comments.
I searched for other discussions of problems with permalinks, found none … am I alone?

Graham Perrin wrote:
https://discussions.apple.com/message/12619289#12619289
— should present a post by llude
https://discussions.apple.com/message/15038000#15038000
— should present a post by m4kbassman
If I prefer threaded discussion,
https://discussions.apple.com/message/12619289#12619289 appears flat and fails
https://discussions.apple.com/message/15038000#15038000 appears threaded and works
https://discussions.apple.com/message/15715762#15715762 appears threaded and works
https://discussions.apple.com/message/15715975#15715975 appears threaded and works
https://discussions.apple.com/message/15716792#15716792 appears threaded and works
https://discussions.apple.com/message/15717525#15717525 appears flat and works.
If threaded is a partial workaround, it is not ideal. I rarely prefer threaded.
Side note
The narrowness of threaded (more generally, the narrow non-elastic design of Apple Support Communities at this time) makes it unnecessary difficult to work with plain text, as is used when pasting code.

Login request failed, when logging in from the iPhone simulator.

Hi all,
I am currently working on a setup, based on the Co-innovation Architecture with a SUP 2.0 server and SAP Netweaver Mobile 7.1. We have created a SWCV in Netweaver Mobile and deployed it SUP 2.0 and generated Objective C code.
The iOS 4.3 simulator is able to connect to the SUP server, and the device is registered in the control center, thus a "Login request failed" is thrown.
Here are the logs from the SUP server:
2011-11-24 11:45:34 INFO DataServices sup.mbs.10 [com.sybase.vader.mms.DataServiceImpl]9#78311995 supAdmin d1_mypackage_mdc.1_0 (sup.mbs.10) com.sybase.vader.mms.DataServiceImpl::execute:238 - Response From Operation: doec.execute {response={content={}, id=1322131361, pkg=mypackage_MDC:1.0, method=loginFailed, loginFailed=true, log=[{"timestamp":"2011-11-24 11:45:34","message":"No Subscription Found","level":"error","code":404}], cid=9#78311995}, pushTo=sup.mbs.moca.5}
2011-11-24 11:45:34 DEBUG DOEC sup.mbs.10 [com.sybase.vader.sap.doe.SapDoeConnectorOperation]execute( login ) --> result:
| cid : 9#78311995 : 10
| log : [{"timestamp":"2011-11-24 11:45:34","message":"No Subscription Found","level":"error","code":404}]
| loginFailed : true
| method : loginFailed : 11
| pkg : MYPACKAGE_MDC:1.0 : 19
| id : 1322131361 : 10
| content : {}
DOE-C Response Message
2011-11-24 11:45:34 WARN DOEC sup.mbs.10 [com.sybase.vader.sap.doe.SapDoeConnectorOperation]Login request failed:
| cid : 9#78311995 : 10
| pid : moca://SIMULATOR-MAC2SIM2__SUP101 : 33
| method : login : 5
| pushTo : sup.mbs.moca.5 : 14
| pkg : MYPACKAGE_MDC:1.0 : 19
| ppm : eyJsYW5ndWFnZSI6bnVsbCwidXNlcm5hbWUiOiJzdXBBZG1pbiIsInBhc3N3b3JkIjoiczNwQWRtaW4ifQ== : 84
| replyTo : sup.mbs.moca.5 : 14
| upa : *
| content : {}
| id : 1322131361 : 10
2011-11-24 11:45:34 DEBUG DOEC sup.mbs.10 [com.sybase.vader.sap.doe.SapDoeConnectorOperation]execute --> login
2011-11-24 11:45:34 TRACE DataServices sup.mbs.10 [com.sybase.vader.service.interaction.PipelineCompositeInteractionOperation] 9#78311995 supAdmin d1_mypackage_mdc.1_0 (sup.mbs.10) com.sybase.vader.service.interaction.PipelineCompositeInteractionOperation]Invoking d1_mypackage_mdc_1_0_subscriptions.findSubscriptionByClientInteractionOperationBean.getResult
It looks like it is the doe-c throwing the error. I am able to ping Netweaver Mobile from the control center, with the tech user defined.
I hope you have any suggestions.
/Nima
Edited by: NimaZandi on Nov 24, 2011 12:48 PM

Hi Nima,
Were you able to resolve this issue? I am also facing a similar problem.
Thanks,
Krishneel

Burning fails when "downgraded" to older iTunes, too

I've been wrestling this failure to burn for a couple of days. I uninstalled iTunes, rebooted, and installed a copy of iTunes 6 that I still had in a download directory. To get that to install, I had to blow away my library file. Upon starting iTunes 6, I attempted to burn a CD, and got the usual "cancelling burn, this may take a few minutes" and then the mysterious error code 4450.
Burning the music that I paid for to a CD to go in the car or to work is a major feature, for me. Nothing else can burn my collection of Mpeg4 audio, either. Does Apple make money from selling a bizillion songs at a dollar a piece? Do they want to continue to make money from me?
How will we know when they patch this now nearly useless package?

Hi Rachel, did you ever find a fix for this? Last night I update itunes to 10.0.1 so that I could use it in conjunction with my new Apple TV. I went to sync some new content to my 1st Gen iPod Touch and it kept crashing iTunes. I've never had any issues with my system or set up at all and the ipod touch has always been fine with every upgrade of itunes.
Wondering if you ever found a fix or any others are having a similar experience?

Validation fails when schema and xml doc are located in different folders

xml file and schema are in different folder. Schema uses namespaces. When I try to validate, I get exception:
truecvc-elt.1: Cannot find the declaration of element 'Start'
In xml document I have a Start element, which is a root element like this:
<Start ... xsi:schemaLocation https://test.fi/Start
C:/my_schema_folder/2005/Start.xsd>...</Start>
xml document is in C:/my_xml_folder/test.xml
Why this dont work? I try to validate laki this:
SAXParser parser = new SAXParser();
try
          parser.setFeature("http://xml.org/sax/features/validation",true);
          parser.setFeature("http://apache.org/xml/features/validation/schema",true);
          parser.setFeature("http://apache.org/xml/features/validation/schema-full-checking",
          true);
          parser.setProperty("http://apache.org/xml/properties/schema/external-schemaLocation", SchemaUrl );
          Validator handler=new Validator();
          parser.setErrorHandler(handler);
          parser.parse(XmlDocumentUrl);
          if(handler.validationError==true)
          System.out.println("XML Document has Error:"+handler.validationError+""+handler.saxParseException.getMessage());
          else
          System.out.println("XML Document is valid");
     catch(java.io.IOException ioe)
          System.out.println("IOException"+ioe.getMessage());
     }catch (SAXException e)
          System.out.println("SAXException"+e.getMessage());
     }

Sorry, my bad. It was just a typing error...aaaargh!!! ;)

Keep the old value in the UI field if entity validation fails

Hi,
I have a requirement to retain the original value (old value), if the entity attribute validation fails when the filed value is changed. I have created one validation rule on the entity object and the validation rule is working as expected. But I would like to reset the value to the original value if the validation fails on the modified value.
Thanks and Regards,
S R Prasad

Hello,
Please tell us your first name, and change your forum handle to something more friendly than User123. It’s nicer and easier for us this way.
It seems that the forum software messed up the example code you wanted to present. To avoid that you can use the forum tags [code] and [/code] at the beginning and end of your code.
If I understand correctly, you are trying to retrieve the original field value from a fxx array, however these arrays are populated after page submit, so they don’t hold the initial values of the column.
I think the simplest solution will be to use an ‘onfocus’ event that will save the initial value – this.value – in a global JavaScript variable. In your ‘onchange’ code, instead of clearing the field if validation failed just assigns the original value for the JavaScript variable.
Regards,
Arie.
&diams; Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.
&diams; Forthcoming book about APEX: Oracle Application Express 3.2 – The Essentials and More

PowerPivot for SharePoint configuration tool validation failed

Validation fails when I run the PowerPivot for SharePoint configuration tool. I've set up a virtual machine with Windows Server 2008, SQL Server 2012 (with SP 2) and SharePoint 2010. The firewall is completely turned off (temporarily).
The SQL Server service is running (so is SQL Server Browser). TCP/IP and Named Pipes are both enabled (disabling one or the other doesn't solve the problem). Remote connections are enabled. The services have been stopped and restarted every
time I make a change to something. Still getting the following error. Can anyone help? Thank you in advance!
Cannot connect to the database server instance. A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and
that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)

Solved it. I used the IP address as the server name, instead of using the standard naming convention.

Validation failed when logging in to iTunes U lecture

Similar Messages

Maybe you are looking for