Validation failure when trying to add derived associations

Hi,
I am trying to add derived associations to my plugin. I want to add an association between my plugin target and a target from outside my plugin (an ASM instance).
However, during the validation of the plugin, it fails with this message:
Violation type: NON SDK Access detected
Validation Type: Meta data Embedded SQL
Artifact being accessed: VIEW CM$MGMT_ASM_DISK_ECM
Accessed by: SQL String sql0 in /home/oracle/src/oem_pi_emc_vmx3/stage/oms/metadata/derivedAssocs/emc_vmx3_assocs.xml
Source file path: /home/oracle/src/oem_pi_emc_vmx3/stage/oms/metadata/derivedAssocs/emc_vmx3_assocs.xml
The SQL query embedded in the above file or class is accessing a non SDK DB object. For legibility only SQL IDs are mentioned here. The actual SQL Strings corresponding to these IDs are mentioned towards the end of the report.I read the Programmer's Reference doc, chapter 10.3.1, sub "DB Objects Referenced by Rule Queries", which specifies:
For security reasons, the SYSMAN_RO user will execute your rule query. Therefore, only objects accessible by this user are allowed to be referenced. For objects created outside of your plug-in you can reference views exposed by the Extensibility Development Kit (EDK) at your plug-in level, including those prefixed with MGMT$ and GC$.However, I want to use table cm$mgmt_asm_disk_ecm as my query needs the "PATH" column. I cannot find this in any MGMT$ or GC$ table?
I saw thread metadata with defining Derived Associations valided failed. about same issue but haven't been able to solve my problem with that yet.
Any input appreciated!
Thanks,
Ed

This issue is not longer a question, as it was solved by using table MGMT$METRIC_CURRENT instead.
Just restrict the table to the required target_Type and select the required metric_column. THe value column will then give the value that's needed.
Regards,
Ed

Similar Messages

Fatal error when trying to add derived table

Hello,
I'm new at desiging a universe. I get the following a fatal error when trying to add a derived table to my universe:
1 processor x Family 15 Model 0 Stepping 0
Windows 2000 Workstation v5.1 build 2600 (S)
Physical Total/Avail: 2.097.151 Kb / 2.004.940 Kb
Temp directory C:\DOCUME1\xxxxxx\LOCALS1\Temp\ (1 Kb available)
'Unknown' video card
1280 x 768 in true color
(doesn't make sense to me)
I use an ODBC connection that connects to a MySQL database. When I test the connection it's fine.
I am trying to add a derived table because it seems that my universe cannot produce LEFT OUTER JOINS. I read somewhere that I should set my ansi92 parameter to YES instead of NO. But, everytime I re-open my universe, it sets itself automatically to NO again.
My utlimate goal is :
For example, list ALL the people, left join my table to their websites, but return ALL the people, even if they don't have a website.
I dont' understand, my join should be simple enough.
Anybody knows what could be causing all these restrictions ?
Thanks for you help.
Edited by: Sose Canadian on Feb 9, 2009 9:40 PM

Hi Sose,
In BusinessObjects (Universe) Designer, the outer join option in a join is not available and is dimmed when using a Generic ODBC connection.
Try Following Solutions:
Solution : 1
When using an ODBC connection the odbc.prm must be modified on the machine where BusinessObjects Designer is used.
Use the following steps to modify odbc.prm:
1. Locate odbc.prm in the following folder:
\Business Objects\Business Objects Enterprise 11\win32_x86\dataAccess\Connection Server\odbc
2. Open odbc.prm in a text editor and modify the parameter 'EXT_JOIN' so its value is 'YES' instead of 'NO'.The outer join option is now available in BusinessObjects Designer.
If the outer join option is still not available after following the steps above. open odbc.prm in a text editor and modify the parameter OUTERJOINS_GENERATION. Change its value from 'NO' to either 'ANSI92' or 'ODBC'.
Solution : 2
This can occur when user is using a non-database specific middleware such as generic ODBC. Generic ODBC allows creating a successful connection and universe, however will not allow the Outer Join option.
The syntax for outer joins is specific to each database and the Generic ODBC driver only lets you access standard common features of all ODBC data sources.
Ensure that you are using the database specific middleware to create the connection.
I Hope this Helpsu2026.
Thanksu2026.
Pratik

ORA-29024: Certificate validation failure when trying to redirect to https

Hi, I was trying to redirect the page to another https website using utl_http.request,
I configured Oracle wallet and import the certificate, and successfully to get the webpage content in sqlplus by
select utl_http.request('https://<website>,null,<wallet>,<wallet password>) from dual,
but when I trying to use the same way in a button process of Apex, the error ORA-29024: Certificate validation failure prompt.
Anyone know what wrong with it?
Thanks
Vincent Pek

Hi, Sorry, I found that after i reboot my laptop , it's working now.

The current user has insufficient permissions to perform this operation when trying to add Term stored managed navigation.

Hi,
i am getting this error "The current user has insufficient permissions to perform this operation." when trying to add the Term store managed navigation like the following screen shot. i am the Farm
administrator and as well managed services account. also noticed, cannot delete the service application, saying you don't have enough permission to delete the db. but using this account i was able to do everything before in my environment. is anyone already
face this kind of error, so what will be the way to resolve this?
Appreciated!

event though its a farm admin,It should provide the access to MMS.please find the below link for more details and the solution for the issue.
Go to SharePoint Central Administration Site –> Application Management –> [Service Applications] –> Manage service applications
2.   Highlight the Managed Metadata Service that your web application is associated with. (Do not click on the link, just click somewhere else on that row to highlight it)
3.   Click on Permissions button in the ribbon area.
4.   Add the application pool account used by your web application and give it ‘full Access to Term Store’
5.   Click OK.
http://expertsharepoint.blogspot.de/2014/08/managed-metadata-service-or-connection.html
Anil Avula[MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/

I am not receiving the verification email when trying to add an email account

I am not receiving the verification email when trying to add an email account to facetime and iMessage. Is there something else I can do?

Hi,
I don't ever remember getting an email when Adding an account.
Apple seems to verify it some other way (a self test to see if it is valid ? an actual email ?)
I tried adding an older @mac.com account that is not a valid email (gained when MobileMe was the Apple service and the @Mac.com registration was used for iChat names).
I then tried to add a Yahoo one.
This got past the first part and said an email has been sent.
As you say this has never arrived.
( checked the web Site for Yahoo Mail as well as my Mail App.)
In each case I also checked the Spam and Junk folders in both places.
I then tried an iCloud ID.
(FaceTime seems to treat the Original Apple ID and the iCloud issued email as separate IDs)
I did not get and email (Although it said it was sent) I did get a Pop up for the FaceTime app asking if I wanted to add an email and a second for the actual email itself. (It turned out it added an @me.com email also issued by iCloud before the @icloud.com was issued.
This is much the way iMessages adds emails when you add the emails to an iPhone, the Mac version gets pop ups.
I recently had something similar in Messages that might be related.
In Messages 7 (Mountain Lion) it seemed it could be any Apple ID that was used.
In Messages 8 it seems this has to be an iCloud linked one.
The @mac.com one I used above could not be added to iMessages either when I tried it about two months ago.
It might be one I have removed the creating/Recovery email so that i could create another Apple ID.
The name continues to work in Messages as an AIM valid screen name but I could not add it as the iMessages account and got sent to iCloud to "register" it but ran into problems that I have not sorted out yet.
EDIT.
Checked the Apple ID site and the @mac.com email I used has no linked Alternative/recovery email.
8:29 pm Sunday; March 9, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
Message was edited by: Ralph Johns (UK)

I get error message when trying to add key tags

I get error message when trying to add key tags

You should always backup your iPad before ever doing anything major that coould result in a catastrophic loss is something goes wrong. You can then usually restore from the backup when your iPad has recovered.
You should also be sure to have transfered any new purchases directly to your iPad to the iTunes app on your computer on a regular basis.

Error message when trying to add signature. An error has occurred that may be fixed by installing the latest version of the Japanese Language Support package.

Error message when trying to add signature. An error has occurred that may be fixed by installing the latest version of the Japanese Language Support package. How can I fix this?
Thanks
[email protected]

What is your operating system? Reader version?

When trying to add music to a slide show from my PC to TV through Apple Tv the photos are fine but I get an error message that says the music cannot be downloaded.

When trying to add music to a slide show from my PC to TV through Apple Tv the photos are fine but I get an error message that says the music cannot be downloaded.

Because the location for each song in your library is on your hard drive. If the hard drive isn't there, how can iTunes play it?
You'll have to move/copy the music from your hard drive to your computer's hard drive.
Basically, EASIEST way to do all this, if you don't care about your play counts, etc...
-Delete EVERYTHING from iTunes, so that your library is now empty.
-Go to "Advanced" inside of the "Preferences" window, found in the "Edit" drop-down. You can also access Preferences by pressing Ctrl+, (Press Ctrl and the comma key)
-Change your iTunes Media Folder Location to something simple, but on your computer. I use C:/iTunes. Make sure "Keep iTunes Media Folder Organized" and "Copy files to...." are both checked. You can close Preferences now.
-Now, drag and drop your music from your hard drive into your iTunes library. iTunes will automatically add the music to your library, as you would expect, and also creates a copy of each file to place into that iTunes Media Folder you just created.
Shouldn't have any more problems...

Error message when trying to add new user

Hello,
Customer is working on 2005B (2005B 7.40.252 SP00 PL39).
They are working on this database since 2009.
No upgrade was recently done.
when trying to add a new user they get athe following error:
"A user was added outsite the application. Delet it, or preform'Restore Numbering' [Message 3512-7]"
Could you please advice.
Regards,
Maya

Hi Maya......
Go to Administration--> Utility and select the restore no. series.
Update this and try to add User.
But do it first in your test DB.....
Regards,
Rahul

I continue to get an error message when trying to add Header

I continue to get an error message when trying to add Header & Footer. Therefore I am unable to add page numbers to my pdf. Help!!

Sounds like the PDF has an issue. You can try to save it, close, and reopen to see if that fixes it. If there are no tags or other markup, you could print it to a new PDF and try on the new file.

Class is not appearing in "Java Batch Job Class Search" when trying to add.

Hi,
I have oracle CC&B 2.3.1, with SDK 2.2.0.12. I am trying to create new java batch job class by copying an existing one and modifying it to be used with new Batch Control .
Steps are as follows:
1-Created file by copying the exiting file
CreateLatePaymentChargesProcess.java ; and only changing the name of the class:
public class CmCreateLatePaymentChargesProcess
extends CmCreateLatePaymentChargesProcess_Gen
File location :
D:\spl\ccb231\applycm\ssgc_patch\java\source\cm\ CmCreateLatePaymentChargesProcess.java
D:\spl\ccb231\applycm\ssgc_patch\java\source\cm\ CmCreateLatePaymentChargesProcess_Gen.java
2-Run ApplyCm build successfully , which generated these files:
D:\spl\ccb231\java\target\cm\com\splwg\ccb\domain\billing\batch\ CmCreateLatePaymentChargesProcess.class
D:\spl\ccb231\java\target\cm\com\splwg\ccb\domain\billing\batch\ CmCreateLatePaymentChargesProcess_Gen$1.class
D:\spl\ccb231\java\target\cm\com\splwg\ccb\domain\billing\batch\CmCreateLatePaymentChargesProcess_Gen$CmCreateLatePaymentChargesProcessWorker_Gen$ThreadParameters.class
D:\spl\ccb231\java\target\cm\com\splwg\ccb\domain\billing\batch\CmCreateLatePaymentChargesProcess_Gen$CmCreateLatePaymentChargesProcessWorker_Gen$ToDoProperties.class
D:\spl\ccb231\java\target\cm\com\splwg\ccb\domain\billing\batch\CmCreateLatePaymentChargesProcess_Gen$CmCreateLatePaymentChargesProcessWorker_Gen.class
D:\spl\ccb231\java\target\cm\com\splwg\ccb\domain\billing\batch\CmCreateLatePaymentChargesProcess_Gen$JobParameters.class
D:\spl\ccb231\java\target\cm\com\splwg\ccb\domain\billing\batch\CmCreateLatePaymentChargesProcess_Gen.class
All the above classes are part of CM.jar file
ContextManagedObjects.xml ; contains these information
<com.splwg.shared.environ.ContextManagedObjectData>;
<domainPackages/>
<lookupFieldClasses class="tree-map">
<no-comparator/>
</lookupFieldClasses>
<cobolAlgorithmInterfaceExtensions class="tree-map">
<no-comparator/>
</cobolAlgorithmInterfaceExtensions>
</com.splwg.shared.environ.ContextManagedObjectData>;
packageMetaInfo.xml was not created
Still the class is not appearing in "Java Batch Job Class Search" when trying to add a new program name referencing this java class.
I tried restarting the Tomcat application server, still not appearing.
Where did I go wrong about it?
Thanks
Edited by: cc&amp;amp;b-user on Jul 29, 2011 12:39 AM
Edited by: ccb-user on Aug 2, 2011 9:28 PM
Edited by: ccb-user on Aug 7, 2011 11:36 PM

Hi,
Did you copying the base file CreateLatePaymentChargesProcess.java?
I also create a new batch job which copying the CreateLatePaymentChargesProcess batch code the only difference in getBills() method query and inner class CreateLatePaymentChargesProcessWorker extend CmCreateLatePaymentChargesProcessWorker_Gen, instead of CreateLatePaymentChargesProcessWorker_Gen.
The batch is working fine in my end.
Thanks,
Atul Singh.

I am getting an error when trying to add a caption.

I get the following error when trying to add a caption to a photo.   "An error occurred while reading files or writing files to disc. The disc may be full or there may be a problem with the source media."    I am running Windows 7 Pro.   The files are located on my c:.   The drive has 274 GB Free so space isn't an issue.   I have tried deleting a file and readding it to the same catalog and still the same problem.   I have copied the file to the desktop and cataloged it from there and the error went away.
If i check on the folder attibutes it is set to read-only but the desktop folder is as well.   If i try to remove the read only it only resets itelf to read only again.   Once i get the error another file shows up with the image name plus -edTM P-1 and it has the caption on it.

I was able to get it to work. The root folder which held the pictures had a lock on it through windows 7.   Even though the drive was shared, I still had to go into the folder properties and share it with everyone.   Once i got the lock off and rebooted I was able to add captions again.

Error: "client-error-request-value-too-long" when trying to add printer

After installing the 10.4.9 Combo update, my HP 1350 All-in-One printer was not recognized. I reinstalled the driver, but now I can't add the printer. I get the error message "client-error-request-value-too-long" when trying to add the printer. Has anyone else experienced a similar problem.
Thanks in advance

Well, I tried all of that and I'm still getting the error message. I've also repaired disk permissions and run Disk Warrior. When I repaired disk permissions, many HP printer items showed up in the list.

Macbook Pro says plug in failure when trying to watch a movie

My Macbook Pro says plug in failure when trying to watch a movie.

This did not work and I'm glad that I only paid for the cheapest plan on macupdate.com. For other people that view this discussion, after a couple of days of trying things and then viewing a couple of other discussions, what worked for me was uninstalling my Silverlight and then reinstalling it. Thanks for everyones input !!!!

Ora 12154 error when trying to add a database to VS Server Explorer

Hi Everyone,
I get the Ora 12154 error when trying to add a database to VS Server Explorer.
How do I get around this problem.
The database service is running and I can connect to the database with pl/sql.
I can also tnsping the database and that is also ok.
Looks like a problem with the odp.net software.
I am running the 32 bit Oracle 11g on a Windows7 Home Premium 64 bit PC.
I am new to this stuff so please help me step by step.
Thanks.
Emad

Hi J. B.
I have a question related to this. After you told me about the //host:1521/database alias I tried it in a VB 2008 program and it worked and returned data. At least I know that it can be used in a VB program without issues. I just now need to be able to add a connection with the Server Explorer.
Anyway here is the VB coding I used. I'm new to this and still learning:
Imports Oracle.DataAccess.Client ' Visual Basic ODP.NET Oracle managed provider
Public Class Form1
' String to connect to the database.
Dim strConnectionString As String = _
"Data Source=//emad-pc:1521/emadeva;User ID=scott;Password=tiger;" '
' Associate the connection string with a connection object.
Dim objOracleConnection As New OracleConnection(strConnectionString)
' SQL query for returning data rows.
Dim strSqlQuery As String = _
"Select dname, deptno " & _
"From dept " & _
"Where deptno = 10" '
' Command object to make this query work.
Dim objOracleCommand As New OracleCommand(strSqlQuery, objOracleConnection)
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
' Identify what type of command is being used.
objOracleCommand.CommandType = CommandType.Text
Try
objOracleConnection.Open()
' Set up a Data Reader and load it with data.
Dim objOracleDataReader As OracleDataReader = _
objOracleCommand.ExecuteReader()
objOracleDataReader.Read()
' Convert the department number to a string.
lblDepartmentNumberFromOracle.Text = _
CStr(objOracleDataReader.Item("deptno"))
Catch ex As Exception
MessageBox.Show(ex.Message, "Error")
End Try
End Sub
End Class
I still want to thank you for the help you are providing.
Truly,
Emad

Validation failure when trying to add derived associations

Similar Messages

Maybe you are looking for