Validation Issue - urgent

Hi experts,
I am facing a peculiar issue with Validation Check, in Process Control.
I have done the following:
1. set the Validation Top account, in my AppSettings
2. Enable SupportsProcessManagement - in appropriate scenario
3. Manage Submission Phases is set to * - in Phase1 column - My Validation Account's submission Group is set to 1.
4. I have 4 independent Validation hierarchies, each one, having a submission group as 1, and are set in ValidationAccount, ValidationAccount2, ValidationAccount3, ValidationAccount4 respectively.
When I plot the Validation Account, in a data grid, I can see values, coming in the grid.
However, when I start Process Management, the Pass / Fail, is showing as Pass, even if there is value in the Validation Accounts
When I click on the Validation Pass / Fail icon, the Validation Report inside, shows blank - not even a Zero value - throughout the grid. As a result, the entity is able to promote to the next review level, even if Validation is not cleared.
Is there any setting, which I am missing out on, which is not showing Validation errors, whereas I can see Validation values in the Data Grid?
thanks
Never mind.. I found out the issue.. It was related to Rules and Metadata setting.
Edited by: Indraneel Mazumder on Aug 2, 2011 10:50 PM

I'm also facing the same issue,may i know what changes you made in metadata.quick reply is appreciated.

Similar Messages

Using Tabs in Generated Pages - Validation Issue

Hi,
We're using JHS 10.1.3.0.97 and are using the "stacked" regions functionality
to make the form less cluttered.
The problem we're having now is that whenever a user wants to
view the items on a tab (that is not currently the selected one),
a validation issue is thrown saying that all the mandatory fields need to be entered first.
Is there a way to avoid this message and postpone the validation until the
user clicks on the "Save" button?
Regards,
Cliff

Cliff,
I am sorry, in the 10.1.3.1 release we switch off server-side model validation on a partial page request.
It is not possible to switch off the client-side validation, because the only way to do this, is by setting immediate=true on the tabs. However, with this setting JSF will skip the Model Update phase, which means that any changes you made to the tab region you are going to leave by clicking another tab, would be lost.
The only alternative is by creatign a custom templates and generating the required items with showRequired="true" instead of required="true" which means required items are never checked client-side.
Steven Davelaar,
JHeadstart Team.

Validation issues with form (was: Validation)

I am having validation issues with my form. Even after I put in a name and last name it says the entries are invalid. Could this be a hosting problem? www.bussmanncomputers.net/Nx

Below is mail form from my isp, which is Godaddy:
This is the form that I am having some problems with configuring.
<?php
if ( !isset($_SERVER['SPI'])) {
        die();
if (!isset($_SERVER['DOCUMENT_ROOT'])) {
        echo("CRITICAL: we seem to be running outside of the norm.\n");
        header("Location: http://".$_SERVER["HTTP_HOST"]."/");
        die("CRITICAL: Document root unavailable.\n");
$request_method = $_SERVER["REQUEST_METHOD"];
if($request_method == "GET") {
        $query_vars = $_GET;
elseif ($request_method == "POST") {
        $query_vars = $_POST;
reset($query_vars);
function customsort($a,$b) {
        // $a is array for form vars, $b is comma seperated case sensitive field order
        // this is case sensitive -- good idea to hrc that.
        $data = array();
        if ( strstr($b,',') == FALSE ) {
                $b = $b.",";
        $ordering = split(',',$b);
        foreach ($ordering as $orderitem) {
                if ( ($orderitem != null) && ($orderitem != "") ) {
                        if (isset($a[$orderitem])) {
                                $data[$orderitem] = $a[$orderitem];
        foreach ($a as $key=>$val) {
                $data[$key] = $a[$key];
        return $data;
function xmlentities($string) {
        return str_replace ( array('&', '"', "'", '<', '>'), array('&', '"', ''', '<', '>'), $string);
$t = date("U");
$formhomedir = preg_replace('/.*\/home\/content/','',$_SERVER['DOCUMENT_ROOT']);
$formhomedir = explode('/',$formhomedir);
if (count($formhomedir) <= 4) {
        $formhome="/home/content/".$formhomedir[1]."/".$formhomedir[2]."/data/";
else {
        $formhome="/home/content/".$formhomedir[1]."/".$formhomedir[2]."/".$formhomedir[3]."/".$f ormhomedir[4]."/data/";
$file_order = ".default";
$file_format = ".text";
$file_interval = ".15m";
$field_order = "";
if (isset($query_vars['form_order'])) {
        if ($query_vars['form_order'] != "alpha") {
                $field_order=$query_vars['form_order'];
                $file_order=".custom";
                $query_vars = customsort($query_vars,$field_order);
        else {
                switch ($query_vars['form_order']) {
                        case "alpha":
                                uksort($query_vars,'strnatcasecmp');
                                $file_order=".alpha";
                        break;
                        default:
                                $file_order=".default";
                        break;
if (isset($query_vars['form_format'])) {
        switch ($query_vars['form_format']) {
                case "csv":
                        $file_format = ".csv";
                break;
                case "html":
                        $file_format = ".html";
                break;
                case "xml":
                        $file_format = ".xml";
                break;
                case "text":
                case "default":
                default:
                        $file_format = ".text";
                break;
if (isset($query_vars['form_delivery'])) {
        switch ($query_vars['form_delivery']) {
                case "hourly":
                        $file_interval = ".60m";
                break;
                case "hourly_digest":
                        $file_interval = ".60mc";
                break;
                case "daily":
                        $file_interval = ".24h";
                break;
                case "daily_digest":
                        $file_interval = ".24hc";
                break;
                case "digest":
                        $file_interval = ".15mc";
                break;
                case "default":
                default:
                        $file_interval = ".15m";
                break;
$file = $formhome."form_".$t.$file_order.$file_format.$file_interval;
$fp = fopen($file,"w");
reset($query_vars);
switch ($file_format) {
        case ".csv":
                $csvkeys = "";
                $csvvals= "";
                $firsttime = "";
                while (list ($key, $val) = each ($query_vars)) {
                        if ( ($key == "form_order") ||
                                ($key == "form_format") ||
                                ($key == "form_delivery") ||
                                ($key == "redirect") ) {
                        else {
                                if ($csvkeys != "") {
                                        $firsttime=",";
                                $tmpkey=escapeshellcmd($key);
                                $csvkeys = $csvkeys.$firsttime."'".$tmpkey."'";
                                $tmpval=escapeshellcmd($val);
                                $csvvals = $csvvals.$firsttime."'".$tmpval."'";
                fputs($fp,"$csvkeys\n");
                fputs($fp,"$csvvals\n");
        break;
        case ".html":
                fputs($fp,"<table border=\"1\" cellspacing=\"1\" cellpadding=\"2\">\n");
        break;
        case ".xml":
                fputs($fp,"<form>\n");
        break;
reset($query_vars);
while (list ($key, $val) = each ($query_vars)) {
        if ($key == "redirect") {
                $landing_page = $val;
        if ( ($key == "form_order") ||
                ($key == "form_format") ||
                ($key == "form_delivery") ||
                ($key == "redirect") ) {
        else {
                switch ($file_format) {
                        case ".html":
                                fputs($fp,"\t<tr>\n");
                                fputs($fp,"\t\t<td><b>$key</b></td>\n");
                                fputs($fp,"\t\t<td>$val</td>\n");
                                fputs($fp,"\t</tr>\n");
                        break;
                        case ".csv":
                                // content is already output
                        break;
                        case ".xml":
                                fputs($fp,"\t<field>\n");
                                fputs($fp,"\t\t<fieldname>".xmlentities($key)."</fieldname>\n");
                                fputs($fp,"\t\t<fieldvalue>".xmlentities($val)."</fieldvalue>\n");
                                fputs($fp,"\t</field>\n");
                        break;
                        case ".text":
                        default:
                                fputs($fp,$key.": ".$val."\n");
                        break;
switch ($file_format) {
        case ".html":
                fputs($fp,"</table>\n");
        break;
        case ".xml":
                fputs($fp,"</form>\n");
        break;
fclose($fp);
if ($landing_page != "") {
        header("Location: http://".$_SERVER["HTTP_HOST"]."/$landing_page");
else {
        header("Location: http://".$_SERVER["HTTP_HOST"]."/");
?>

[svn] 3457: Accepting patch SDK-17038 by Brian Telintelo to fix an incorrect validation issue in ComboBox .

Revision: 3457
Author: [email protected]
Date: 2008-10-02 13:45:35 -0700 (Thu, 02 Oct 2008)
Log Message:
Accepting patch SDK-17038 by Brian Telintelo to fix an incorrect validation issue in ComboBox.
Checkintests: Pass
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-17038
Modified Paths:
flex/sdk/branches/3.0.x/frameworks/projects/framework/src/mx/controls/ComboBox.as

Installation issue -urgent

Hai frnds
I have got a new dell studio 15 laptop.iam much interested in oracle applications and for the purpose of learning oracle applications i got it.when i tried to install redhat enterprise linux 4 replacing windows xp on my machine it throws the error message as driver not found and the installation does not proceed.when i asked the computer dealers they said that i have to go for some newer rhel version for installing linux in my laptop since its a new brand.
before few days i tried to install oracle applications 11.5.10.2 on rhel 5 but i got a lot of errors and the oracle forums advised me to go for rhel 4 for installing oracle applications 11.5.10.2.now iam confused and dont know wat to do .
my aim is install oracle applications 11.5.10.2 on some newer version other than rhel 4 which supports my dell laptop
i want to know whether installation of oracle applications 11.5.10.2 is possible on rhel 8 or rhel 9.will the installation goes properly.
Thanks and Regards
Parithi.A.

Hi,
Please see your other thread.
install issue -urgent
install issue -urgent
Regards,
Hussein

Need help in Payroll Tax Balance Issue - Urgent

Hi,
Please help me with the following Tax and Balance issue. The system is on 12.0.3, South African Legislation.
Issue : Salary has been restructured from Basic Salary to Total package structure in Dec 2008. Retro Pay was used to pay the difference amounts in Dec Run. But while configuring the new Elements for this Total Package they have missed out adding the Retro Elements to Proper Tax calculating Balances.
Eg : "TP Salary" element is fed to "Taxable Income RFI" balance but "TP Retro Salary" element is not fed to this balance.
So tax has not been calculated for those Retro amounts. This has been identified while validating test run for IRP5 tax certificates.
The Feb 09 (Feb is the Tax year End for payroll) Payroll was already run on 10th and payments were already done. Now we need to tax the retro amounts and retrieve the balance tax amounts from Employees.
I added the proper tax balances to those Retro elements and and the balances were adjusted to add the Retro amounts. Then I ran the Feb run the payroll again as of 20th, it did not recalculate the tax.
How to recalculate the tax so that correct tax reflects in the Tax certificates? Please help me with the necessary Info.
Thanks,
Sri.

Hi,
As I mentioned earlier, I added the appropriate balances which are used to calculate Tax to Retro Elements and those Balances got updated with the delta amount but Tax was not updated. I want to know is there any process provided by Oracle using which Tax for those already paid amounts can be recalculated.
I calculated the Tax manually and using Adjust Balance form added ZA_TAX_BALANCE_ADJUSTMENT Element and given the difference tax amount in PAYE and Tax Input values and saved the form. The Tax got updated.
Tax_ASG_RUN - 15000
Tax_ASG_TAX_YTD - 153257.32 (Prev - 138257.32). When I run the IRP5 (Tax Certificate Process) the tax is also getting correctly on it.
But client wants Oracle to calculate the Tax for those retro amounts so thats the challenge.
Could you help me with this.
Thanks,
Sri

LOV in a Table - "Not a valid Value" - Urgent

Hi All,
I have an LOV inside a Table region. The table has the Add another row button. considering the table has currently 3 rows created and the user enters a dummy value not present in the LOV in the first row and tabs out. The LOV automatically pops up without any values. The issue is when the user closes the pop-up window or clicks on its cancel button. The LOV doesn't validate the data present in the text box. If the Submit button is clicked or the save button is clicked , The framework automatically validates the data present in the text box and throws an error "Not a valid value" .
Now im not sure why but the dummy data entered in the first text box is copied to the second and third text box , and the error is displayed for all the three rows. If there is valid data present in the remaining rows it just over-writes the data with the dummy value.
I have written SOP's in the controller's Process request as well as the process form request but none of them seem to display anything.
So the framework is basically validating this before the controller is called.
Im working on a 11.5.10 instance.
Need help to know if anyone has come across such a situation before.
Thanks ,
Dean

Dean,
Seems to be a looping issue. Also you need to get the exact error row.
Thanks
--Anil

SQL Query Group By Issues - Urgent

I currently have an issue writing a pl\sql report, I can get part of the way to the results I want but the group by clause is causing problems, because I have to add more columns to the group by, dispersing the figures further, I have tried it with coalesce for each of the task types but I still get the same results, I am getting close to the results I need but not quite there yet. I would really appreciate it if someone could take at look at this for me as it is an urgent requirement.
The report is based on the tables similar to the following:
TASKS, ORGANISATIONS, POSITIONS
A position is a member of an organisation.
A task has a position assigned to it.
The SQL for the tables and to insert the data that would produce the report is detailed below:
CREATE TABLE TASKS
(     TASK_ID NUMBER NOT NULL ENABLE,
     TASK_TYPE VARCHAR2 (15 BYTE) NOT NULL ENABLE,
     STATUS VARCHAR2 (15 BYTE) NOT NULL ENABLE,
     POS_ID NUMBER NOT NULL ENABLE,
     CONSTRAINT TASKS_PK PRIMARY KEY (TASK_ID));
CREATE TABLE ORGANISATIONS
(     ORG_ID NUMBER NOT NULL ENABLE,
     ORG_NAME VARCHAR2 (15 BYTE) NOT NULL ENABLE,
     CONSTRAINT ORGANISATIONS_PK PRIMARY KEY (ORG_ID));
CREATE TABLE POSITIONS
(     POS_ID NUMBER NOT NULL ENABLE,
     POS_NAME VARCHAR2 (25 BYTE) NOT NULL ENABLE,
     ORG_ID NUMBER NOT NULL ENABLE,
     CONSTRAINT POSITIONS_PK PRIMARY KEY (POS_ID));
INSERT INTO ORGANISATIONS (ORG_ID, ORG_NAME) VALUES (1,'ABC');
INSERT INTO ORGANISATIONS (ORG_ID, ORG_NAME) VALUES (2,'DEF');
INSERT INTO ORGANISATIONS (ORG_ID, ORG_NAME) VALUES (3,'EFG');
INSERT INTO POSITIONS (POS_ID, POS_NAME, ORG_ID) VALUES (1,'ABC-1', 1);
INSERT INTO POSITIONS (POS_ID, POS_NAME, ORG_ID) VALUES (3,'ABC-2', 1);
INSERT INTO POSITIONS (POS_ID, POS_NAME, ORG_ID) VALUES (2,'ABC-3', 1);
INSERT INTO POSITIONS (POS_ID, POS_NAME, ORG_ID) VALUES (5,'DEF-2', 2);
INSERT INTO POSITIONS (POS_ID, POS_NAME, ORG_ID) VALUES (4,'DEF-1', 2);
INSERT INTO POSITIONS (POS_ID, POS_NAME, ORG_ID) VALUES (7,'EFG-1', 3);
INSERT INTO TASKS (TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (12,'TASK_TYPE_3','LIVE',3);
INSERT INTO TASKS (TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (11,'TASK_TYPE_2','LIVE',3);
INSERT INTO TASKS (TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (10,'TASK_TYPE_2','LIVE',2);
INSERT INTO TASKS (TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (9,'TASK_TYPE_2','LIVE',2);
INSERT INTO TASKS (TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (8,'TASK_TYPE_1','LIVE',3);
INSERT INTO TASKS (TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (7,'TASK_TYPE_1','LIVE',3);
INSERT INTO TASKS (TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (6,'TASK_TYPE_1','LIVE',3);
INSERT INTO TASKS (TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (5,'TASK_TYPE_1','LIVE',3);
INSERT INTO TASKS (TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (4,'TASK_TYPE_1','LIVE',2);
INSERT INTO TASKS (TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (3,'TASK_TYPE_3','LIVE',1);
INSERT INTO TASKS (TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (2,'TASK_TYPE_1','LIVE',1);
INSERT INTO TASKS (TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (1,'TASK_TYPE_1','LIVE',1);
INSERT INTO TASKS (TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (13,'TASK_TYPE_3','LIVE',3);
The report should detail the following information based on the information in the tables:
1st Column
Organisation
ABC
DEF
EFG
2nd Column
No. of Positions in Organsiation
3
2
1
With total of the number of people in all of the organisation 6
3rd Column
Number of tasks assigned to the organisation of task type1
2
1
4
4th Column
Number of tasks assigned to the organisation of task type 2
0
2
1
5th Column
Number of tasks assigned to the organisation of task type 3
1
0
2
Total no of tasks assigned to the Organisation
3
3
7
Message was edited by:
Suzy_r_82
Message was edited by:
Suzy_r_82

Hi,
Apologies, my insert statements where incorrect, if you try the data below instead it should give you output I was expecting
INSERT INTO TASKS( TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (1,'TASK_TYPE_1', 'LIVE',1);
INSERT INTO TASKS( TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (2,'TASK_TYPE_1', 'LIVE',2);
INSERT INTO TASKS( TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (3,'TASK_TYPE_1', 'LIVE',5);
INSERT INTO TASKS( TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (4,'TASK_TYPE_1', 'LIVE',7);
INSERT INTO TASKS( TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (5,'TASK_TYPE_1', 'LIVE',7);
INSERT INTO TASKS( TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (6,'TASK_TYPE_1', 'LIVE',7);
INSERT INTO TASKS( TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (7,'TASK_TYPE_1', 'LIVE',7);
INSERT INTO TASKS( TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (8,'TASK_TYPE_2', 'LIVE',4);
INSERT INTO TASKS( TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (9,'TASK_TYPE_2', 'LIVE',5);
INSERT INTO TASKS( TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (10,'TASK_TYPE_3', 'LIVE',1);
INSERT INTO TASKS( TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (11,'TASK_TYPE_3', 'LIVE',7);
INSERT INTO TASKS( TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (12,'TASK_TYPE_2', 'LIVE',7);
INSERT INTO TASKS( TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (13,'TASK_TYPE_3', 'LIVE',7);
The results I would like are
ORG    No. of Pos     No of Task    No of Task     No of Task     Total no
           In Org           Type1 for      Type2 for        Type3 for       of Tasks
                               Org             Org                Org               for Org
ABC        3                   2                 0                   1                   3
DEF        2                   1                 2                   0                   3
EFG        1                   4                 1                   2                   7
Total        6The results I get are multiple lines for each organisation, I would like to rollup these lines so I can have one line per organisation.
Hope this helps a bit more, I appreciate the help, let me know if you need more information
Thanks
Suzy

Document Signature - Validation Issue

This is the recent help i've been trying to get on this subject over at acrobatusers.com. You can read through the issue i'm having through here, answer that was given and my response.
Summary: Basically there are multiple text fields that are set to required, customer name, email...etc. All fields must be locked after being digitally signed (through the document signature field). When default validation pattern are used (blank) it generates an error (Customer field could not be validated). After trying regular expression script, it generates an error (Customer field could not be validated). So i tried a number of different combinations of picture clauses, and from what i'm gathering you have to know exactly how many characters are going to be typed to use that sort of validation. Which in a customer name field you have know idea what their name is going to be (unless you customize a document for each individual customer (not possible)).
If anyone could help on this problem would be a lifesaver. Thank you
::COPY OF HELP QUESTION SUBMITTED::
Apparently I'm not getting the field validation examples in the Help (F1) of Livecycle. I've been struggling to get all the fields in a collection to validate properly. Once I add a Document Signature field to the document and assign the fields to a collection, it doesn't seem to like the default validation settings if I assign the fields to 'User Input: Required' So for the name field I've tried multiple validation patterns all to no avail. My question is how to write a custom validation pattern that allows for an unknown ammount of characters in a name, email..etc. I've tried A A which only validates if the user enters J D for example but John Doe does not work. I've tried other combinations but nothing works. Any help would be appreciated.
Thank you
::ANSWER SUBMITTED BY COMMUNITY EXPERT::
A:There are a couple of things you need to look at. First, is the Acrobat Picture Clause Reference. You can find it and other LiveCycle references on this site
http://partners.adobe.com/public/developer/xml/index_arch.html
The other thing to look at is using a JavaScript validation script with a Regular Expression. Regular Expressions are much more flexible that the picture clause at doing validation.
Answered by Thom Parker on Fri, Jul 6, 2007
::RESPONSE FROM ME BACK::
Q:After reading through the Picture Clause Reference I'm certain there is no way to validate the customer name field without first knowing how many characters will be entered in. And I'm pretty sure there is no simple way of just making it "required" without a pattern to verify against.
The Document Signature Field acts pretty weird if the text field is 'required' and there is nothing to validate it against. Which all in all I just want to make sure it is filled out. Customer Name field (First and Last name) one text field.
So I tried the regular expression route, and added it to the 'Validate' section of the text field. Still I think the problem lies in the way the Document Signature field processes the 'required' fields.
Now I noticed that this only happens if I set the document signature field to lock the required fields after digitally signing the document. This is a mandatory feature the document needs to have, along with the document signature. And the custom stamp option is not a viable solution to this either, since in my field of work everything is questioned whether or not it was altered or forged in some manner. And Custom 'Forged' stamps would not be too difficult to recreate, so that idea is out of the window.
I'm stumped on this and any suggetions as to what route to take would be greatly appreciated. I can not release a document to the customers with validation error messages popping up even though the fields are filled out. Just wouldn't be professional, and down right annoying considering it validates about 15 fields, and everyone except the date and tim

Hey Robert,
I've been having the same issue where, once digitally signed, I end up having an issue with my mandatory fields returning an error '[mandatory field name] validate failed'. Is this the sort of errors you are getting? I'm also trying to find answers on this as I've tried a few things but it hasnt worked well. One thing I did was to change the mandatory field back to optional and coded my submit button using the if clause when the submit button is pressed to check if the this mandatory field is filled in.
if ((pgDetails.txtReqBy.rawValue != null) &&(pgDetails.txtReqBy.rawValue != ""))
event.target.submitForm({cURL:"mailto:[email address]?subject=New/Edit Supplier Detail Form&body=Please find attached the completed form.",cSubmitAs:"PDF",cCharset:"utf-8"});
else
xfa.host.messageBox("Requested by field MUST be filled. Pls enter your full name.");
This seems to work fine except for one thing. If first time around, I fill the form out leaving the mandatory field blank, it returns the message "Requested by field MUST be filled. Pls enter your full name." So now I go back and fill in the mandatory field and, without navigating to another field, I click the submit button, I get the same message "Requested by field MUST be filled. Pls enter your full name." as it has not picked up the new value of the field. Any idea if there is code to make it re-read the field?
Rgds,
Jan

Spry validation issue with submit button

Hi,
I'm new to Spry but am having an issue getting it to work at all. I created a very simply form (i.e. table with Spry text field and submit button). I've read many articles and been to several forums, but I can't seem to find the issue I'm having. Basically, when I go to preview the page in a browser, the table with the Spy text field and submit button comes up fine, but when I hit the submit button, I see the page refresh and any values I had in the text field disappear, but nothing ever comes up saying "A value is required," which is what I'm looking for. This happens even if I don't have any values in the text field. Below are images of what I'm describing and also the code. I verified that the "Required" check box is checked in the SpryTextField and the submit button action is selected to "Submit Form." My setup is Win 7, DW6, & XAMPP. Any help you can provide would be greatly appreciated.
Before Submit Button pressed:
Browser after button pressed: (same as above but no message saying "A value is required.")
Code:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Untitled Document</title>
<script src="SpryAssets/SpryValidationTextField.js" type="text/javascript"></script>
<link href="SpryAssets/SpryValidationTextField.css" rel="stylesheet" type="text/css" />
</head>
<body>
test
<table width="600" border="1">
<tr>
    <td><form id="form1" name="form1" method="post" action="">
      <span id="sprytextfield1">
      <label for="test"></label>
      <input type="text" name="test" id="test" />
      <span class="textfieldRequiredMsg">A value is required.</span><span class="textfieldInvalidFormatMsg">Invalid format.</span></span>
    </form></td>
</tr>
<tr>
    <td> </td>
</tr>
<tr>
    <td> </td>
</tr>
<tr>
    <td> </td>
</tr>
<tr>
    <td><form id="form2" name="form2" method="post" action="">
      <input type="submit" name="submit" id="submit" value="Submit" />
    </form></td>
</tr>
<tr>
    <td> </td>
</tr>
</table>
<script type="text/javascript">
var sprytextfield1 = new Spry.Widget.ValidationTextField("sprytextfield1", "email");
</script>
</body>
</html>

Do yourself a big favor and don't waste time with Spry Validation. Most modern browsers support HTML5 forms with the required attribute.
If you must placate older browsers, use jQuery validate script. It's lightweight and works when HTML5 support is missing. You can see an example below. If you hit submit with empty form fields, the required fields pop-up with messages. View source in browser to see the code.
HTML5 Form with jQuery Validation
Nancy O.

Digital Signature validation issue in Adapter Module

Hi guys,
we have developed an adapter module for digital signature validation, unfortunately, it simetimes work, sometimes doesnt. Strange is, that the same adapter module works for one customer, while for another one doesn't.
We have sent through some "invalid" messages, which should have been valid at the client, where the module works and theu were flagged as valid. It seems the problem is caused by "special" spanish characters, because validation works for the messages where are only standard chars.
Any idea, what to check? Java version, system encoding?
Any help appreciated,
Olian

Hi,
Not really sure about what causes such issues, but if your module coding uses String and byte[] manipulation, are you using explicite encoding when declaring such types ? I remember facing strange issues with XML field values, and "forcing" encoding to "UTF-8" when appropriate, it solved all my errors (string typed object, when converted internally by the JVM, were not always represented by the same bytes object)
Hope this helps
Chris

Question : Adding a signature to a PDF programmatically with Acrobat 8 (Reader 9 validation issue)

Hi,
Please, apologyze my poor english.
I have an application that inserts a signature programmatically in a PDF document with Acrobat 8, via VB .NET, using the example provided in the Acrobat 8 SDK ("AddSignature").
The problem resides in that previous signatures in the document (signed normally via reader 8 or acrobat 8 application), now becomes INVALID, but only in Reader 9.Acrobat 8/Reader 8 considers them as "valid, with posterior changes".
The difference between the SDK example and this code resides only in the way of calling the script in .net
I call directly the AddSignature function with this code (partial), instead of calling the execution of the "ADBESDK:AddSignature" menu (this improves faster execution with no AVDOC object involved):
        AcroExchPDDoc = New Acrobat.AcroPDDoc
        Dim JsObj As New Object
        AcroExchPDDoc.Open("c:\test.pdf")
        JsObj = AcroExchPDDoc.GetJSObject
        JsObj.SetUserDigitalIDPath("/C/trabajo/DrTest.pfx")
        JsObj.SetUserPassword("testpassword")
        JsObj.AddSignature(JsObj)
        JsOb = Nothing
        AcroExchPDDoc.Save(1, "c:\result_test.pdf")
        AcroExchPDDoc.Close()
I tried to change the AcroExchPDDoc.Save() parameters for intend an incremental save instead of a fullsave, but i keep getting this situtation.
How can this be solved?? Is this a bad approach to the process??
Note that all inserted signatures trough this method are valid in Reader 9.
Any help or comment would be appreciated.
Thanks.

Thanks Steven,
There is something I can´t undestarnd about this issue, and hope you can throw some light on it...
If I use the AddSignature method of Adobe 8 SDK by clicking on the new menu option that it creates, these inserted signatures not causes the invalidation message in Reader 9. The used script is the same, so I can´t figure out why.
Once inserted a new signature by ("my") code, it invalidates all previous "normally" inserted signatures trough the GUI, but not invalidate other signatures inserted trough this code (No matter how many signatures of this type are present in the document).
        I suppose that this means only a blank outline tree is inserted, and only the first time I apply the signature.
As an additional info, I´ve attached to this post a new pdf file with one signature normally inserted, and three signatures "code-inserted". (The "result_pdf.pdf" included in previous post, with another two code-signature).
As you can see, all except the first are valid, and any other new signatures inserted in the document (normal or code) won´t result in an invalid statement after the 1st code-insertion.

ESB File Adapter data validation issue

I have a really simple ESB process.
File Adapter Read
(XML format with XSD) --> Routing Service --> SOAP Call to BPEL Process
Quite simply, the ESB uses the File Adapter to read an XML file which has an associated XSD. The contents are then routed to a BPEL Process.
If the XML file is valid in syntax but contains an element which is not in the XSD, the file contents are pushed to the BPEL process which has validateXML set to true - thus the error is caught and handled by the BPEL process.
This is what I want to happen.
If the XML file is invalid in syntax - for example -
<TAG>hello</WRONGTAG>
The ESB process rejects the file and stops dead.
I would rather the invalid file is pushed to the BPEL so that the BPEL can handle the error.
Why?
Because my error handling in the BPEL picks up the invalid XML format and emails the users to inform them there is a problem.
Can someone help? Is this possible? Thanks.
Message was edited by:
IanBaird

Hello again! You are now aware of the problem as there has been a lot of conversation between myself and Dave Berry [and you!] regarding this issue.
For the rest of the readers - here is a brief summary of progress so far. Sorry but there has been so much communication that I think the best way is to direct you to various links.
If an adapter fails in ESB, then it is possible to trap these failures and handle them as documented here:
Dave Berry said:
you need to look into the adapter rejection handlers which are documented on OTN ESB page in the exception handling lesson and the adapters OTN dev resources page http://www.oracle.com/technology/products/integration/adapters/dev_support.html
I had also devised my own solution in the meantime, which involves reading the input file as opaque schema and passing this to a BPEL process which converts it to an XML document! This can then be validated and use standard BPEL error handling to find any problems in the file format etc.
See my blog for a tutorial on doing this:
http://soastuff.wordpress.com/2007/06/06/handling-opaque-datatypes-in-bpelesb/
The only problem with this at the moment is that the BPEL function ora:parseEscapedXML has a bug in it - so it fails if the XML does not comply with the XSD it tries to convert to.
This in turn causes an ORABPEL-09500 error which does not seem to get handled by the BPEL process so the process fails.
As things stand, this bug remains - though Dave Berry has been very helpful in identifying it and bringing it to Muruga's attention. Hopefully we can get a fix (?) and a workaround whilst the fix is being implemented (?)
Cheers.

0P_FYEAR issue - Urgent - Please help

Hi,
We are developing six new BCS queries. We have already have about 30 reports.
1. We are using the Fiscal Year variable (0FISCYEAR) - 0P_FYEAR in most of the queries. In the new reports, particularly in one query, the previous year is not working with -1 offset value. but, the same variable is working in other new reports for previous year. Please help how to rectify the issue.
2. I have started trying many options in QA environment and found that there was a option to choose CONSTANT SELECTION in the 0FISCYEAR. So, I tried to select the Constant selection and found that the PREVIOUS YEAR IS WORKING for the query, for which earlier it was not working. Now, my another issue is that previous year is not working for all other queries which we have used the 0P_FYEAR as variable.
Since I have tried this in QA, all the reports in QA are not working for previuos year. Please advise urgently to correct the same.
Thanks & Regards,

Hi ,
Have you used Fiscal Yaer variant in your query?
When you use these variables you should restrict querieswith correct fiscal yaer Variant.
Jaya

[Fixed] Validation issue - Sax

G-day
I use an instance of XMLReader. its config is :
parseur = XMLReaderFactory.createXMLReader();
     // g�re les pr�fixes "xmlns:*"
     parseur.setFeature("http://xml.org/sax/features/namespace-prefixes", true);
     parseur.setFeature("http://xml.org/sax/features/namespaces", true);
     parseur.setFeature("http://xml.org/sax/features/validation", true);
     parseur.setFeature("http://apache.org/xml/features/validation/schema", true);
parseur.setFeature("http://apache.org/xml/features/validation/schema-full-checking", true)the schema location is defined in the xml document in input :
<sh:StandardBusinessDocument xsi:schemaLocation="http://www.unece.org/cefact/namespaces/StandardBusinessDocumentHeader
http://www.gs1globalregistry.net/2.0/schemas/sbdh/StandardBusinessDocumentHeader.xsd urn:ean.ucc:2
http://www.gs1globalregistry.net/2.0/schemas/CatalogueItemNotificationProxy.xsd"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xmlns:xs="http://www.w3.org/2001/XMLSchema"
    xmlns:sh="http://www.unece.org/cefact/namespaces/StandardBusinessDocumentHeader"
    xmlns:gdsn="urn:ean.ucc:gdsn:2"
    xmlns:eanucc203="urn:ean.ucc:2">When I parse it, I get the following error message : cvc-elt.1: Cannot find the declaration of element 'sh:StandardBusinessDocument'.
I assume it can't find the schema. have you any idea of my mistake ?
I downloaded the schema on PC and modified the root node like this :
<sh:StandardBusinessDocument xsi:schemaLocation="http://www.unece.org/cefact/namespaces/StandardBusinessDocumentHeader
file:/C:/jdevstudio1013.2/jdev/mywork/BMS_Package_Align_Catalogue_Item_Synchronisation/Catalogue_Item_Synchronisation_Implementers_Packet/Schemas/sbdh/StandardBusinessDocumentHeader.xsd urn:ean.ucc:2
file:/C:/jdevstudio1013.2/jdev/mywork/BMS_Package_Align_Catalogue_Item_Synchronisation/Catalogue_Item_Synchronisation_Implementers_Packet/Schemas/CatalogueItemNotificationProxy.xsd"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns:sh="http://www.unece.org/cefact/namespaces/StandardBusinessDocumentHeader"
xmlns:gdsn="urn:ean.ucc:gdsn:2"
xmlns:eanucc203="urn:ean.ucc:2">in this case, it works fine, the schema is found. But I would like to use the schema defined with the http link.
Thanks a lot
Message was edited by:
bullit

Fixed. It was just a proxy issue !

Validation Issue - urgent

Similar Messages

Maybe you are looking for