Validation of existing certificate does not work since release 9.3.3

Hi everyone,
Since I updated to Adobe Reader 9.3.3 the validation of digital signatures does not work properly anymore. Though I try to validate the certificate that used to be OK before the upgrade to 9.3.3 I now get an error on the same document and signature that used to work before. In the signature details Adobe Reader now states that "The certificate ...is not trusted...". This has to do with the new Adobe Approved Trusted list (AATL) I assume since nothing else changed.
Does anybody know a workaround or is anybody aware of a bugfix that will be released in the near future?
Thanks in advance,
Mike G

Works for me.
What OS/JDK etc are you using?

Similar Messages

My scanner (Epson V300) does not work since mountain Lion upgrade.

My scanner (Epson V300) does not work since Mountain Lion upgrade. I updated the drivers,I can get it to work one time when I reboot the iMAC it will function (scan) one time and than not again until I reboot. Help!!!

Try trick #5, at > Eight amazing Image Capture tricks | Macworld

HT6114 My Apple 7.2 mail does not work since I upgraded to OS X Mavericks, what has gone wrong?

My Apple 7.2 mail does not work since I upgraded to OS X Mavericks, what has gone wrong?

Have you tried using http://support.apple.com/kb/HT4505 guidance for scanning? Has always worked for me with my Epson scanner.

The remember me dialog box does not work since I upgraded to OS 10.10.1 and Safari 8.0

The remember me dialog box on various web sites does not work since I upgraded to OS 10.10.1 and Safari 8.0

Try running the combo update.
10.9.2

I use OverDrive to get audiobooks from my library to listen on my ipod. Does not work since latest update of ipod. Converts the WMA and acts like it is putting it on the ipod but then it isn't there.

I use OverDrive to get audiobooks from my library to listen on my ipod. Does not work since latest update of ipod. Converts the WMA and acts like it is putting it on the ipod but then it isn't there.

Downgrading the iOS is not supported by Apple.Have yo tried:
- Backing up and restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
- Go to the OverDrive support site

My morphie pack does not work since upgrading

My juice pack (Morphie) Does not work since i have upgraded the ios to 7.1.1
I have two iphones a 4s that has not been updated yet and also the 5s which has been updated. The 4s is working perfectly well with the juice pack but the 5s is absoultely crap to say the least. I complained to Morphie and to their credit the sent me a new pack and it has the same problem. This MEANS since the update there has been a change with apple and they have made our 100€ chargers redundant as I only get 20 - 25% extra battery when I should be getting a full charge
This is not acceptable for phones that are expensive and the accessories that we buy to go with them are also an additional expense and very expensieve to. That doesnt matter too much when they work, but then they dont it is NOT good.
Someone come back to us and give us a solution please.
Elena - a very loyal apple client with apple imacs in the office, mac book pros and air mac for sale staff along with ipad minis and iphones......... NOT A HAPPY CLIENT

3l3na t wrote:
Thanks guys for the responses but I am not convinced this is a MOPHIE problem. Their customer service department have been great and look after their clients. I have two iphone 4s´s which have not been upgraded for fear of being left with the rubbish battery I have with my relatively new iphone 5s. Mophie have replaced the amost new juice pack that I had with a completely new one that has the same problem...... funny how this has happened since the ios 7.1.1. update
I have been using MOPHIE juice packs for a number of years and have never experienced anything like this before. It seems rather strange that after upgrading I have this problem that APPLE negates to rectify.
Of course I wouldn´t have to use a 3rd party accessory if the battery was made to last and if APPLE had an alternative, I would of course buy apple but they don´t. I am a huge fan of Apple but cannot run a business with phones that cannot be upgraded for the fear of loosing battery life which would mean loosing clients which would mean loosing my lively hood.
Full phone restore was done too.
Still not HAPPY
Sorry, as already stated your using a 3rd party accessory take it up with mophie.
I have no issue with my mophie after updating to 7.1.1 - so your theory is flawed.
My battery life can last up to a day and a 1/2 - I only bought the mophie as a backup battery and because it is bulky and can protect my phone in case I drop it.

My scanner does not work since mountain lion

Since I installed Mountain Lion my scanner does not work anymore.
I have a Konica Minolta Magicolor 1690MF and the printing works.
There doesn't seem to be other drivers available at Konica Minolta.

Your apparently older Model needs to use Apple's "Print & Scan" which is found in Applications>System Prefernces>Print & Scan:
Place the item that you want to scan on the scanner glass, or load it into the automatic document feeder (ADF) if your printer has one.
Click the Apple menu (# ), and then click System Preferences .
Click Print & Scan (# ).
Click your printer in the left pane.
Click Scan , and then click Open Scanner .
Click Show Details . The details of the scan display, including options to change scan settings.Figure 4: Example of the Show Details scanning screen#
Change any scan settings as necessary, and then click Scan .NOTE: Make sure to select either the Flatbed mode or the Document Feedermode, depending on your printer and how you plan to scan.
Hope this helps

HT4623 My sounds for such things as Netfix, or ABC Shows, etc does not work since last update. How do I fix that?

Sound not working since last upgrade. Get no sound with Netflix or ABC, NBC,etc. worked fine before last update.
How
do I fix this?

Hey Janetna5,
Thanks for the question. Does restarting your iPad help the issue?
Restarting your iOS device
1. Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
2. After the device has turned off, press and hold the Sleep/Wake button until the Apple logo appears.
via iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
If not, is it possible that your side switch is toggled to mute sounds? See this resource for information:
Volume buttons and the Side Switch - iPad User Guide
http://help.apple.com/ipad/7/#/iPad9940e758
Mute notifications, alerts, and sound effects. Slide the Side Switch toward the Volume buttons.
The Side Switch doesn’t mute the audio from music, podcasts, movies, and TV shows.
Thanks,
Matt M.

My predictive text does not work since the new update

The "predictive text" does not work on y IPod 4g since the new software update. How do I fix it?

As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?
Post back with the result.

Tecra M7 DVD: CD/DVD RAM drive does not work since installing Vista

I did a clean installation on my Vista Ready new M7. It had XP tablet to begin with and the DVD drive worked fine. Indeed I used it to install Vista (Home Premium).
Now it does not work at all. It spins but does not read. Device Manager tells me device cannot start. Tried to update driver and it told me that it has the most uptodate driver.
Downloaded all the drivers from Tosh download centre for Vista upgrade of M7 (which got bluetooth, screen rotation etc to work fine). But none of the downloads seemed to be a driver for the DVD-Ram drive. Can not find a driver anywhere else (including Panasonic site).
DVD drive is Mat****a DVD-RAM UJ-841s
Any suggestions?

Hi
On the Toshiba driver page you can find the DLA for Tecra m7.
Did you try to install the XP DVD-RAM driver from the Toshiba page on the Vista OS?
Maybe it will works
But listen the CD/DVD drive uses the common Microsoft drivers which are included into Vista or XP.
Therefore an additional driver should be not needed!
One additional proposal;
Remove the CD/DVD drive from the device manager and reboot the notebook.
After new reboot the OS should install the drive again and should renew the software.
Other hint:
- Start the registry
- Choose the registry key;
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
- In the right pane, right-click UpperFilters and LowerFilters then click Delete.
- and restart the notebook

HT3180 Apple tv does not work since software update

Proceeded wtih software update and now there is a blank screen and apple tv also does not work from ipad mirroring

So you can't access the main menu?
I would grab a mirco usb cable and restore in iTunes, update likely didn't apply correctly
http://support.apple.com/kb/HT4367?viewlocale=en_US&locale=en_US

My Norton Identity Safe does not work since installing FF4.0.1

After installing FF4.0.1 my Norton Identity Safe does not work. Also, I have been getting a few pop-up windows which my Norton would normally have blocked. Norton is not showing any issues. FF is set to block Pop ups.

Symantec have made an update for their add-ons to work in Firefox 4, but they only listed them as compatible with Firefox 4.0, they need to update them to let them work in Firefox 4.0.1. For details see http://community.norton.com/t5/Norton-Internet-Security-Norton/Norton-product-compatibility-with-Firefox-Updates/m-p/443808

Hdmi does not work since updating to jelly bean

Since updating my at305-16 to JB hdmi will not work . I go into settings and select hdmi out but get no signal on tv.

I think it might be a JB driver issue. I was having the same problem connecting it to my LCD, but when I switched to my plasma it works. The LCD is 1080P Auto the plasma is 720P auto. But fropping my LCD to 7120P didn't help. I don;t know if you have two TVs to try on, but it couldn't hurt.

Scrabble does not work since installation of Yosemite. How do I get it to work?

I have a Mac Mini with recently installed Yosemite OS X . I had to reinstall iPhoto, iMovie and two other programs that were not compatible with the
new Yosemite. After calling tech support I found that my Scrabble no longer works. It tries to load and does nothing more than show a start-up menu and play music. It does not respond. I tried re-loading the disc. No success. Is there any way to get Scrabble to work with Yosemite? I wish I had never installed it.

I Googled and did find:
http://www.bigfishgames.com/download-games/22084/mac/scrabble/index.html
Per
http://gotoanswer.stanford.edu/scrabble_game_for_maverick-12618916/
it does work on Mavericks and Yosemite. Try the free download

Safari 7.1 does not work since installing OS 10.9.5

I installed OS 10.9.5 a couple days ago and since then, Safari 7.1 does not load (I do get the spinning beachball).

Hi ..
Might be a cookies, cache, or extensions issue ..
From your Safari menu bar click Safari > Preferences then select the Privacy tab.
Click: Remove All Website Data
Then delete the cache.
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.
If that didn't help, troubleshoot Safari extensions.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.

Validation of existing certificate does not work since release 9.3.3

Similar Messages

Maybe you are looking for