Validation of SAP Note correction

Hi All,
I have a set of note corrections which are triggered when doing an upgrade of SAP 4.7 to ECC 6.0.
In the Note corrections it gave instructions about the code corrections in the Note.
In this description it gave list of Valid releases . Do we need to check the version of particular module in the source SAP system( SAP 4.7 ( if it exists in the list then we can go a head and apply the note to the upgrade system to get the effect in Target system (ECC 6.0))
Valid Releases
SAP R/3 PlugIn for SAP APO, SAP BBP, SAP BW, SAP CRM
         2003_1_31I
         2003_1_470
         2003_1_46C
         2003_1_46B
         2003_1_45B
         2003_1_40B
         2004_1_470
         2004_1_46C
         2004_1_46B
         2004_1_45B
         2004_1_40B
         2004_1_31I
         2004_1_500
Please let me know wether i can go a head and install all Sap note corrections which are encountered in upgrade or do i need to validate like this.
Please let me know the general pratice.
Cheers,
Reddy

Hi,
When you download a note through SNOTE the system determines whether the note is applicable to your system or not .
If applicable when you implement the note only those corrections that are meant for your system are applied the others are ignored , the system takes care of these.
Regards,
Sowmya.

Similar Messages

SAP Note Correct Instructions

Hello Experts,
I have downloaded SAP Note 905624 from service.sap.com. My Note assitant is not configure, so i downloaded it using download manager.
When i uploaded the Note and tried to check it, its displaying the error:
"SAP Note 0000905624 cannot be implemented".
When i am trying to execute it from SNOTE inital screen, its displaying the error: "SAP Note does not contain valid correction instruction".
Do i have to change any code of any object? Please help me in knowing more abt dealing with correction instructions. I have Support Package 7 for BI 7.0 is already installed which is pre-requisite for this note.
Please guide me.
Cheers!!!!!!
Points will surely be rewarded for all reponses.

Hi Prince,
While activating transformation at BI 7.0 side i got an error while activating transformation. From SDN i came to know i have to apply NOTE 905624. But before applying this note i have upgraded my system from SP-6 to SP-7, and i tried to activate the transfomation, but it didn;t worked again.
Now what to do?
Cheers!!!!!

Validity slice is not correct for non-cumulative cube

Hello Expert,
There are two non-cumulative cube, say cube1 and cube2. Cube2 has only one more dimension of PLANT than Cube1.
Cube2 is copied from cube1 and change the char of validity.
Cube1 & cube2 use the same fill data source. That is, first load with opening balance and second with delta.
char of validity for cube1: calendar day & material
char of validity for cube2: calendar day & plant.
The query based on cube1 works well. To say cube2, the validity slice(in TXN RSDV or TBL /BIC/TCUBE2) is not correct. There is only one record which contains BLANK plant.
There are plants in F table.
I tried the following steps to recovery the validity slice, however, it made no sense.
1) PGM RSDG_CUBE_VALT_MODIFY to rebuild the validity slice structure
2) FM RSDV_VALID_RECREATE with I_REBUILD_FROM_FACT = 'X' to create validity slice from fact table.
Would you please suggest?
Thanks
XY

Hi XY,
For sure, running the RSDV_VALID_RECREATE function module in SE37 will recreate the validity table. And you can use the parameter "X" in the parameter I_REBUILD_FROM_FACT if the entire fact table should be read.
Also, to change the validity slice manually in tcode RSDV you should:
- overwrite the column 'To mode' with a 'F', which mean Fixed
- & then the 'Fixed to time' with your new value.
There is a program which allows you to modify it: Program > RSDG_CUBE_VALT_MODIFY
At
Nadja Xavier

Validity of SAP note 1172948 ??

Hi All,
We have SAP Solution Manager EHP1 SP24 installed and as part of initial configuration, I am trying to implement this note but in snote it is coming as SAP note cannot be implemented.
If I check this note then it says correction instruction delivered in ST400- SAPKITL429. But I am on SAPKITL435. So, shall I assume that SAP has now included this note in support packages ?
Thanks
Sunny

Hello,
That Note is obsolete for your SP level.
You want SAP Note 1405878 - SAP Solution Manager: Basic functions: SP22 to SP26
Note: version is important....most current is 26 as of this writing.
Regards,
Paul

SAP NOTES QUERY

Hi ,
can anyone help me with the problem i am facing.
Sap Note No. : 951764
When the Note is applied to Object BAPI_XBP_JOB_SPOOLLIST_READ_20, a syntax error is generated.
Technically, a fields "plain" is not defined in the function module import parameters.
And in Correction instructions of the SAP Note, there is no mention for the same.
Also,
Explain the concept of sap notes.
Its urgent
answers will be rewarded.

Hi
To check the SAP Notes you need to have the OSS User Id to logon.
Goto www.service.sap.com-> SAP Support Portal--> Enter your OSS User ID
Search for required SAP Note. And open the Note.
The SAP Note describes you the how to modify the program,.
First check the Componet information from your SAP system.. Goto> system> status---> Component Information.
Then for each Component (SAP_APPL -- 470, 500, 600....)there will be different modification.
Now choose your Component and replace the code from SAP Note Correction instructions to your SAP Syatem.
Thanks & Regards,
Dileep .C

Query About Sap Notes

Hi,
I want to know where can I get more indformation about SAP notes.
e.g. We have a sap note no. 'note 871787' , for a newly piece of code added to a standard function module.
Where can i get motre information about this note .

Hi
To check the SAP Notes you need to have the OSS User Id to logon.
Goto www.service.sap.com-> SAP Support Portal--> Enter your OSS User ID
Search for required SAP Note. And open the Note.
The SAP Note describes you the how to modify the program,.
First check the Componet information from your SAP system.. Goto> system> status---> Component Information.
Then for each Component (SAP_APPL -- 470, 500, 600....)there will be different modification.
Now choose your Component and replace the code from SAP Note Correction instructions to your SAP Syatem.
Thanks & Regards,
Dileep .C

Messagein OSS as "SAP Note does not contain valid correction instructions"

Hi all ,
Iam trying to implement the OSS Note 170334 in the SNOTE transaction. When I hit Implement, I get a message -"SAP Note does not contain valid correction instructions" .
Could any one help me what to do now. We are now using ECC 6.0.
Thanks in advance,
Guru

Hello,
The SAP note "170334" does not contain any correction instructions means no code changes to be implemented . You want to test whether the note can be installed in the customer system using the Note Assistant. This is not possible because the note does not contain any correction instructions.
The Note Assistant can only install notes that contain correction instructions. Correction instructions describe changes to the source text of ABAP programs, ABAP includes, function modules, method implementaitons, and screen flow logic.
This particular is just for information and you will see some 5-6 related notes in this note.
Also , whats important here is too implement/refer the long text of the message .
Hope this helps.
*Reward if helpful
Regards,
Sandeep

SAP note validity

Hi experts,
I've read that SAP notes are changes to standard code which are to be included in the next release. I was approached by a team to implement a SAP note; upon checking the validity the note is only applicable to previous SAP versions. Our system is a more recent one. When I check the SAP note in SNOTE, it says "can be implemented". My question is, is this note applicable? Should I follow the validity section of the SAP note? Or can I implement this because it's status says so in SNOTE?
Thanks in advance.

Hi Jack,
sometimes SAP notes are containing some wrong informations. For example if a SAP note is only valid for other releases, but contains a correction instruction for your release, which is valid for your support package level, then you can try to implement it. Many incorrect informations in SAP notes come from SAP version updates, when the note says, it is valid for release x SP level from a to b and correction instruction says, it is valid for release x SP level from c to d.
But please check carefully, that all manual activities can be done and all additionally required notes and their manual activities can also be implemented (or are obsolete).
If you get an installation error, please uninstall the note after installation (if this is possible).
There are many possible errors and issues that may occur:
Correction instruction is already partially implemented
You get activation errors, for some business functions are not active (Switch Framework). In this case you may be unable to uninstall the note without errors.
and many more
If you're thinking that the note will help you to solve an issue, please try to implement it. In case of error you should feel free to contact SAP support.
Regards,
Klaus

SAP Note 144253 For error Enter valid delivery plant in sales order

Hi all,
I am getting the error "Enter valid delivery plant" while creating the sales order . This is due to Customer and plant are same .
For that I got one SAP Note 144253.
If anyone implimented this SAP note Could you please share is there any impact of this note after implimenting.
Thanks
CM

Hi,
Go to bellow links,
http://help.sap.com/saphelp_nw04/helpdata/en/60/8def3981fe5d7de10000000a114084/content.htm
http://www.sap-basis-abap.com/bc/steps-to-install-sap-note.htm
Thanks,
Raviteja

Credit exposure not correct in SAP

Hello,
My company has over 3.2 million accounts in our system and we are coming across the issue of credit exposure not being accurate for customers which is causing credit checks that should not be necessary. It look likes what is happening is that once the open sales order is invoiced the amount is staying locked in the exposure and then it is also added into receivables which is essentially doubling the exposure from what it should be. Is there any configuration changes that we can use to correct this?? With the high volume of customers and transactions on a daily basis this issue is causing a lot of extra work and customer issues. Your assistance is appreciated.
James

Hello,
It happens that LIS is not correctly updated by SAP and that the credit exposure is incorect.
Have a look at the program RVKRED07. You may have to play with the parameters to find the correct combination for the update.
PROTB = X
NOBLOCK = X
You may consider also setting up a daily batch job ...
In fact you have 2 progams given by SAP
RVKRED88, it calls RVKRED07 in test mode
RVKRED77, it calls RVKRED07 in real mode
You can also implement the following reoprts
Z_CREDIT_VALUE_COMPARE (see note 666587 and 864105)
Z_CREDIT_VALUE_COMPARE_DCC (see note 1040893)
Other OSS notes for you, depending on you SAP version
666587
842058
864105
389377
381789
Jean-Christophe

I'm trying to sync my iphone in IPhoto. I get this message "our MobileMe account information is not correct. The provided login or password is not valid." when I click on the "Open MobileMe Preferences" button, it doesn't take me there. Help please.

I'm trying to sync my iphone in IPhoto. I get this message "your MobileMe account information is not correct". "The provided login or password is not valid." when I click on the "Open MobileMe Preferences" button, it doesn't take me there. Help please.

Mobile me has been discontinued for over a year. What system and iPhoto versions are you running?
How are you trying to sync? With Photo Stream or thru iTunes?
Do you have an iCloud preference pane in your System preferences?
Do you meet the minimum requirements for iCloud and Photo Stream?
iCloud: System requirements
iCloud: Photo Stream FAQ
OT

Is the SAP note (old, 2001 year) valid?

Hi!
I am trying to create source system in BW to connect from BW-system to SAP source system. I can connect to SAP system but when I click on use (RFC connection) I get message "Error during insert in port table". I found SAP note with number 110849 but it is was released in 2001 year. I work with Netweaver 7.0. Can I use this note to correct error?
Thanks,
Olga

Olga,
There is another alternative solution here which does not require transaction SNOTE usage - go to SAP Service Marketplace, open the required SAP Note and check section "Affected Releases", where you will be able to find out information on software components' release versions which are affected. Just find out if the one which you use is in the list - if not, then the SAP Note is not applicable for your system. The second step in case the first one is passed and you found your release version in the list of affected releases is to verify Support Package level: ensure that Support Package which delivers the correction for this software component hasn't yet been implemented in your system (if it or higher Support Packages are implemented, then you should already have the correction applied in your system).
My regards,
Vadim

Getting error while implementiong SAP note :Note 1240587 For MDM

Hi Experts,
I am tring to implement Note 1240587 - MDM 5.5 and 7.1 Low performance when MDM workflow is used.
The machine in which our MDM is implemeted is a Unix machine and i have created an executable jar (Including the Coding provided in the SAP note) in my Windows machine, have copied the jar in our MDM server.
when i am trying to execute the jar file i am getting error.
Exception in thread "main" java.lang.Error: Unresolved compilation problems:
        UserSessionContext cannot be resolved or is not a type
        The method createSessionContext(String, String, String, String) is undefined for the type DeleteCompletedWorkflowJobs
        WorkflowTask cannot be resolved
        at DeleteCompletedWorkflowJobs.main(DeleteCompletedWorkflowJobs.java:35)
the coding of DeleteCompletedWorkflowJobs.java class is the same as provided by SAP in note.
Kindly suggest what should be i do in this case.
thanks,
Manjit

Hi,
Have you read the note correctly?
It is clearly mention that
Manual Activity
VALID FOR
Software Component     BBPCRM                        BBP / CRM
Release 400               Until SAPKU40017
Release 500               Until SAPKU50018
Release 520                Until SAPKU52010
Release 700                 Until SAPKU70009
Release 600                 Until SAPKU60009
Release 701                 Until SAPKU70104
Before implementing the automatic corrections from this note, implement Note 1487337 or import the relevant Support Package into your system.
I think This class CL_ABAP_DYN_PRG is not available in your system which comes with support pack mentioned as above or comes with the note 1487337.
So check in se24 whether this class is available or not and if not then apply note 1487337 first and then after apply 1590863.

Table for SAP NOTEs

Hi friends!!
May i know is there any table that gives any info about the NOTES .

Hi deepika ,
Pls see the following tables
CWBNTVALID Validity table for Notes
CWBNTSTXT    Short text for a Note
CWBNTMSG    SAP Notes Message Log
CWBNTHEAD Header table for OSS Notes in customer systems
CWBNTGATTR Table for Any Note Attributes
CWBNTDATA     Compressed data for OSS Notes
CWBNTCI           Assignment of Note to correction instructions
Regards
Byju

SAP Note 1079446 can not be implemented

Hello Gurus,
Can anyone please suggest how to implement note 1079446 in BI7.
When trying to do this through SNOTE transaction its showing message "SAP Note does not contain valid correction instructions". Help will be rewarded with points !!!
Regards,
CNN

Hi CSM,
My BI Component details are as follows :
Component :
SAP_BW , SAP_BASIS
Release :
700 , 700
Level :
0015 , 0013
Highest Support Package :
SAPKW70015 , SAPKB70013
Could you please tell me the steps you followed to do this ?
Thanks,
CNN

Validation of SAP Note correction

Similar Messages

Maybe you are looking for