Validation of Tax Codes in Purchase Order
Dear All,
We have different tax codes like v0, v1, v2 maintained in system and we have projects(WBS) like Project1, Project2 etc.
The scenario is such that if i am trying to create an account assigned purchase order for a project with account assignement as Project1, system should allow only tax code v1. System should not allow other tax codes for project1.
Can we have tax code validation with respect to projects during PO creation.
Request, please provide steps that are required to mainatined to achive the above.
regards,
Suresh
Hi Suresh,
You can use SMOD enhancement MM06E005 component EXIT_SAPMM06E_012. This user exit is designed for checking custom data on the purchase order header, but can also be used for checking the standard PO data.
Some of the tables passed to the user exit are TEKPO and TEKKN, all items of the purchasing document and all account assignments, so you can compare the tax code with the project and produce an error message if the combination is incorrect.
Regards,
Monika
Similar Messages
-
How Create new Tax code in Purchase order
Dear Sir,
I have creat new tax code in Purchase order
Basic value 3976876.53
Ex Duty 10% 397687.6525
edu.cess 2% 7953.75305
s&h Edu.cess 1% 3976.876525
Toatal 4386494.81
CST 1% 43864.94807
Addition 12550.00
i have all ready tax code 1021+5vatHi Sneha Patel
Case1:
If tax is applicable on the freight charges then create a Z condition in (Tocde M/06) and assign it in ur pricing procedure (Tocde M/08) before the net value is calculated in ur pricing procedure so that it is taken for tax calculation.
Case2:
If tax is not applicable on the freight charges then create a Z condition in (Tocde M/06) and assign it in ur pricing procedure (Tocde M/08) after the net value is calculated in ur pricing procedure so that it is not taken for tax calculation.
For both the conditions select
Cond. class A Discount or surcharge
Calculat.type B Fixed amount
Cond.category B Delivery costs
Also mark as a header or item condition with accruals checked.
If u are not sure then copy FRA1 condition in STD and change Calculat.type as B Fixed amount instead of % in FRA1 so that u can enter the amount directly in PO.
Also mark these conditions as manual in ur pricing procedure so that these can be entered manuall in PO if reqd.
While creating PO u can select the reqd condition (with or without tax) under conditions tab and enter the amount.
hope it clears ur issue
Chk and revert
Reg
Raja -
Output Tax Code In Purchase Order
Hi all,
It's possible to assign an output tax code to a purchase order?
The system gives me the error message 6164 'Please enter an input tax code, not an output tax code' when I use an output tax . Is there any customization to allow output taxes in purchase orders?
Thank you,
RSDear friend...
You cannot use output tax code in purchase order, since output tax codes are used only for sales. If you use output tax code in the PO it will obviously throw the error you said. If you want to have the taxes as shown in the output taxes, if not present in your input tax codes, you can create new tax code which you desire. Output codes are only for the Sales Order.
Hope it helps re-ward if so
Suraj -
BAPI for updating tax code for purchase order..
Hi friends,
I have one requirement to change tax code for multiple Purchase order but the
thing is they should not go for release.So what should I prefer BDC or BAPI.
I am thinking to implement it through BAPI, but I don't know what procedure to follow.
If somebody can provide me a small guiding steps or code then it will be very helpful for me..
Thnaks in advance..
Useful answers will be rewarded with points....
Regards,
Rajesh AkarteHi Friend,
BAPI_ACC_PURCHASE_ORDER_CHECK Accounting: Check Purchase Order
BAPI_ACC_PURCHASE_ORDER_POST Accounting: Post Purchase Order
MEWP BAPIs Purchase order
BAPI_PO_CREATE Create Purchase Order
BAPI_PO_GETDETAIL Display Purchase Order Details
BAPI_PO_GETITEMS List Purchase Order Items
BAPI_PO_GETITEMSREL List Purchase Orders for Release (Approval): New as of 4.0A
BAPI_PO_GETRELINFO Display Detailed Release (Approval) Information on Purchase Order
BAPI_PO_GET_LIST List Purchase Orders - Only up to 4.0A
BAPI_PROCOPERATION_GETCATALOGS Determine Valid Catalogs as Value Help
BAPI_PROCOPERATION_GETINFO Analysis of Objects to be Generated in Purchasing
<b>AND</b>
Use condition type NAVS with access sequence 0003 to default the taxcode in the purchase order item using conditions. Materials Management -> Purchasing -> Purchasing order processing ->define screen layout at document level. Search for the transaction ME21.Double click on ME21. Then search for TaxCode
Use condition type NAVS with access sequence 0003 to default the taxcode in the purchase order item using conditions.
A2: Go to IMG.
Materials Management -> Purchasing -> Purchasing order processing ->define screen layout at document level.
Search for the transaction ME21.Double click on ME21. Then search for TaxCode. It is advisable to configure also the info record. The tax code should be a required entry, and whatever you specify here will be the default value in the Purchase order.
Materials Management -> Purchasing -> Purchasing info record -> define screen layout.
When you get here you search for the transaction ME12 ,double click here; search for Input VAT indicator.
Regards ,
Kumar. -
Danger of using old tax code in purchase order
Materials management, Finance and controlling modules are active in
system.we have created new tax codes at the end of Dec 2007 in system
as per the legal requirement.Also condition types are maintianed with
validity period. We have updated existing purchase orders (which are
going to be continued in year 2008) with new tax codes.
But now if by mistake while creating purchase order, user picks up old
tax code and saves PO, system does not give any error.
Is there any way by which we can restrict using of old tax codes at the
time of creating / changing Purchase orders?
Thank you for your time.hi,
check the same in FTXP,limit the validity period of the old tax to 2007 only. -
Default tax code in Purchase Order
hi,
somehow, is it possible to get default tax code (at "Item overview" under "Invoice"), as soon as enter material group (or by other means) in purchase order?
thanksDear Yogi,
Sorry, for posting in to Closed thread.
I had visited your same thread in to MM-Forum. Apart, whatever, suggestions have been provided, you may give a try to:
To default the taxcode in the purchase order item, use Condition Type: NAVS, with Access Sequence: 0003
Path: SPRO -> IMG -> Materials Management -> Purchasing -> Purchasing order processing ->define screen layout at document level
T. Code: ME21 and Double click. Look for TaxCode. The tax code should be a required entry, and whatever you specify here will be the default value in the Purchase order.
It is advisable to configure also the info record.
Path: SPRO -> IMG -> Materials Management -> Purchasing -> Purchasing info record -> Define screen layout.
When you get here you search for the T. Code: ME12 (Change Purchasing Info Record), and double click here; search for Input TAX indicator.
You may also seek Advise from MM-Consultants, over this, by referring the whole solution in to your MM-thread.
Best Regards,
Amit -
Hi Friends,
While creating purchase order, I am getting below error:
Tax code X2 does not exist for jurisdiction code CNM9W1N40
What could be the reason?Can anybody please help me?
Thanks,
BhairavIt is giving below instructions. I am not able to get...
Tax code X2 does not exist for jurisdiction code CNM9W1N40
Message no. FF718
Diagnosis
You have entered tax codes and jurisdiction codes in the G/L account items. The amounts of these items are used as the tax base to check the tax amounts you have entered or to determine the taxes. The system has now determined that one or more of the "tax code / jurisdiction code" combinations do not exist in Customizing.
System response
Calculation of the taxes or checking of the taxes entered had to be terminated.
Procedure
Check the tax codes and the jurisdiction codes in the G/L account items or asset items. If these are correct, inform your system administrator.
Procedure for System Administration
Change the tax jurisdictions you specified in Customizing under Financial Accounting -> Financial Accounting Global settings -> Tax on Sales/Purchases -> Basic Settings -> Define Tax Jurisdictions
Thanks,
Bhairav -
Update Taxes in PO without Tax code in Purchase Order
Hi Experts,
Taxes percentage are frequently change in Indian business and create new input tax codes for updating the same changes in PO.
Please suggest without create new tax codes how can we maintained tax details in PO?
Thanks in advance.
Regards,
Shatrughan SinghHi,
Tax code creation required or not-Depends on which access sequence (JST1 or MWST ) used in your tax procedure.
If tax condition types have access sequence JST1,then you can maintain to change tax rate with validity period without creating a new tax code.
Validity Period available for tax condition types which have access sequence JST1 not access sequence MWST
Regards,
Biju K -
Restrict changing the tax code in purchase order after goods receipt.
Hi,
Po is created with tax code x1.
Gr is done for partial quantity.
IR is still pending.
User has changed the tax code to x2.
This case we want to restrict the tax code change in PO after goods receipt.
Please advice.
Regards
Ravi KumarHi Sumit,
Po created with wrong tax code x1.
Stores person has done the receipt and consumed the stock.
Now user has suddenly realised that tax code is wrong and changed the tax code in PO.
In IR we will use correct tax code and post the accounting entry.
Stock values will be adjusted properly. to stock ac if stock is there and to price diff ac if stock is consumed.
Point is user's are asking that how system is allowing to change the tax code after receipt.
Point to be attended is restrict the change of tax code by any means after Gr has happened.
what are the possibilities to restrict the change of tax code.
Regards
Ravi Kumar -
Changing Tax Code in Sales Order
Hi All,
I've a requirement to change the tax code of MWST CT from normal value XX to a new tax code in sales order for few excpetion cases.
For normal cases the tax code will always be XX for MWST CT in the sales order. However for very specific business need the tax code for the existing sales order needs to be changed to a new value. The need for changing the tax code always arise after creating the sales order.
Kindly suggest the possible ways to meet this requirement.
Regards,
AshishChanging the tax code in the sales order is not std sp procedure and I don;t think sp allow tampering with it either.
The taxes are based on the combination for customer and material and I suggest that you maintain all tax codes at the material and customer level for all combinations possible and each customer is alloted one unique one.
What are the possible reason why tax changes. It can only be the delivery address is changed. If the material iself changes then you may have to modify the sales order itself but if there is a change in the ship to party then....
Now if the shipto party changes then you can always redetermine taxes in billing where the actual taxes will be redetermined based on the new conditions.
If you see the tax line item in the sales order you will see that it is greyed out.
You can change the excise duty but not taxes.
This is the default where the condition type is prohibited from changing manually. But if you change the setting to Free or manual then you can change the value of tax bu the tax code will be as determined by the combination of material and shipto.
regds
Jude
Edited by: jude xavier on Sep 7, 2008 8:23 PM
Edited by: jude xavier on Sep 7, 2008 8:24 PM -
Tables for VAT or CST and RATE OF TAX for a PURCHASE ORDER
i am developing a report(abap ALV)
i need to display the VAT or CST and RATE OF TAX for a PURCHASE ORDER that has been posted .
which tables to refer?hi kumar gaurav
Check KONV table..
based on Condition TYpe you can get...
Regards
Deva -
PROCESS CODE FOR PURCHASE ORDER
Hi Friends,
what is the process code for Purchase order... because i need to creating a partner profile in WE20 in the inbound side.. if iselect message type ORDERS menas.. that related.. process code( for purchase order is not displaying)..
can any of you give me the <b>Message type </b> and that related <b>Process code</b> for <b> purchase order</b>..
thanks
BabuHi Babu,
You will find out the all Process Code from WE41 for Outbound & WE42 for Inbound.
The Process code for ORDERS: Purchase order is ME10 for Outbound and you can find it out the message type for Inbound from WE42.
If need more info let me know..
Cheers
Veera -
Additional field(company code) in purchase order screen layout
Hi All experts,
I have a requirement to set the company code in Purchase order as display field during PO creation or change.
I have checked in IMG under screen layout for purchase order but there is no company code field available.
How can I add the additional field into the screen layout.
Any inout will be highly appreciated.
Thank you in advance
Lost.Hi Chee Wan Ng,
<b>Where</b> exactly you want to set the Company Code field in the Purchase order? Actually this field is already available under <b>Org.data</b> tab in the Purchase Order Creation transaction (ME21N), so you may not require to set the Company Code again.
Which version of SAP R/3 you are using?
Hope this helps you, if not, then give us more details to help you better.
Good luck. -
Change Tax code in sales order
Hello Friends,
We have a requirement for the tax code determination - There are two way determination of tax code in sales order
-> From the tax condtion records
-> From manual input of tax code in the sales order
Could you please advice on how we can insert manually the tax code since the standard SAP not supports the requirement. For your information, business case not supports to maintain condition recors for those tax codes to insert manually.
Please advice
Best Regards,
GouthamHi,
During sales order creation, the tax classification from the customer master is proposed in the sales order document.
In condition record, you maintain the tax code for this tax classification along with some other field combinations. Accordingly, teh percentage linked to the tax code will be decided as teh % of tax for the customer. This is the logic.
If you want to change the tax code in the sales order, it is not possible. However if you really want to change it, you can achieve it by changing the tax classification of the customer in the sales order header. This is available in the billing tab of order header. The field is "Alternate tax classification". You can change the desired tax classification here. Correspondingly by linking the tax code to this tax classification in VK11, you should be able to change the applicable tax code in the sales order.
In summary, you should change the tax classification in order to change the tax code which is linked to it. -
Invoice non deductible tax amount vs Purchase order
In the purchase order the tax amount is calculated item by item (ME21N). In the invoice (MIRO) when we select flag Calculate tax the system calculates the tax amount for the total of all the items. Because of this system behaviour in the invoice verification sometimes we obtain small differences.
These differences should not exist specially when we are using a non deductible tax that affects the material valuation with the goods receipt and has to be corrected in the moment of the invoice verification.
Why does the system have a different behaviour from the purchase order to the invoice?
What can be done?
Best regardsDear Biju K
Whatever you mentioned about condition NAVS is there in system.
I am not adding tax code in PO, referring your earlier email I am asking that.
For adding other element I have not asked anything here, only to clarify your statement
You need to cross check why non-deductible tax amount needed in your PO with NAVS condition type and its purpose.
I explained this.
My question is simple that in one PO I am getting non-deductible tax but if I change vendor for the same material I am not getting non-deductible tax in condition tab ? I am not able to understand why its happened ? If one PO shows means there are chances that basic configuration is correct but may be somewhere something is wrong, I want to find out that. If you can throw some light on that its helpful for me.
regards
Nitin
Maybe you are looking for
-
After new ISP iChat's Video Chat won't work
I recently moved into a new apartment. After moving in I got At&t DSL service. After setting all this up however video chat has not been working on my Mac. I connect to the internet wirelessly through my 500GB Time Capsule. My Modem is a Motorola 221
-
Best way to use Migration assistant?
Hi, will be setting up a new 24" soon and need some advice. Of course, I'll want to transfer data from my old machine, G3 600. Waht is the best way to go about this? 1. Is there some prep work I should do on my old mac first? 2. I've heard that is wa
-
Does anybody has information when we can expect JDeveloper to support new J2SE 5.0 APIs
-
MacBook Pro & Cintiqu 13HD & Another monitor
I have the new retina display MacBook Pro 15 inch 2.3Ghz with Retina display and a Samsung 24" monitor that uses my HDMI port. I would like to also purchase a Cintiqu 13HD. Is it possible to have the Cintiqu and the Samsung monitor all plugged into m
-
How do make sure a trojan how be 100% remove from my Macbook pro?
3 days a go my Kaspersky security had found a two trojans on my Macbook pro I use Kaspersky security on my system. I all so put up a screenshot from my Kaspersky reports to show you guys where the two trojans where found on my system. But I still bel