Validation problem in Mapping

Hi,
I am getting this error when I am trying to validate the mapping
Source table is QMI
" VLD-1002: Mapping object QMI is not bound to a repository object.
All objects in a mapping must be bound to objects in the Design Repository. Unbound objects inherit the logical location of the module that owns the mapping. Warehouse Builder cannot generate the physical access specification (schema name and database link) for this unbound object. Perform a synchronization from QMI. "
Could, some body give me a solution for this validation problem.
Cheers,
Krishna,

Hi,
Thanks for your suggestions. I followed your steps and validating didnt returns any errors.
But, When I am trying to deploy I am getting a message
DEPLOYMENT STATUS : USE DEPLOYMENT
UNDO OR REDO BUTTONS TO CLOSE
WINDOW TO FINISH, PROCESSED : 0, ERRORS :0, WARNINGS :0.
I am able to deploy the mappings but not the source tables and target tables. I am getting deploy status failed in the control cetner.
The work process of my scenario is as follows:
1) I am having two tables from which I need to populate my target ( NEW table ) with some of the columns from those tables.
2) I created a two stage tables manually in the database for both of the source tables in two different mappings
source table 1 into stage table 1 in mapping 1
source table 2 into stage table 2 in mapping 2
3) I created a third table as the final target table where I can map these two stage tables into that .
stage table 1 and stage table 2 into target table in mapping 3 using a JOINER operator. I had given the join condidion as well.
4) All these stage tables and the final target table and the mappings are in the target module.
Is this is the way to work on these type of scenarios. Actually I need to JOIN 8 tables and pull some of the necessary columns into the target table based on the condition.
Intitially I had used a JOINER condition to JOIN those 8 tables in a single mapping.But it gave me the deployment error.
Could you guys please give me a hand by giving me some suggestion how to proceed in this scenario.
Last question : Are there any training centers in chennai or Hyderabad where I can get some trining over OWB 10g.
Cheers,
Krishna.

Similar Messages

Weblogic.descriptor.DescriptorException: VALIDATION PROBLEMS WERE FOUND

I have a deploy application on the server [Weblogic 10], but when I try to assign a VirtualHost handing me the following error:
          weblogic.descriptor.DescriptorException: VALIDATION PROBLEMS WERE FOUND
          problem: cvc-complex-type.2.4b: Element not allowed: dispatcher@http://java.sun.com/xml/ns/javaee in element filter-mapping@http://java.sun.com/xml/ns/javaee:<null>
          problem: cvc-complex-type.2.4b: Element not allowed: dispatcher@http://java.sun.com/xml/ns/javaee in element filter-mapping@http://java.sun.com/xml/ns/javaee:<null>
          at weblogic.descriptor.internal.MarshallerFactory$1.evaluateResults(MarshallerFactory.java:234)
          at weblogic.descriptor.internal.MarshallerFactory$1.evaluateResults(MarshallerFactory.java:221)
          at weblogic.descriptor.internal.MarshallerFactory$1.createDescriptor(MarshallerFactory.java:146)
          at weblogic.descriptor.BasicDescriptorManager.createDescriptor(BasicDescriptorManager.java:292)
          at weblogic.descriptor.BasicDescriptorManager.createDescriptor(BasicDescriptorManager.java:260)
          Truncated. see log file for complete stacktrace

<?xml version="1.0" encoding="UTF-8"?>
          <web-app id="WebApp_ID" version="2.4" xmlns="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd">
          <display-name>portalUchileWeb</display-name>
          <welcome-file-list>
          <welcome-file>index.html</welcome-file>
          <welcome-file>index.htm</welcome-file>
          <welcome-file>index.jsp</welcome-file>
          <welcome-file>default.html</welcome-file>
          <welcome-file>default.htm</welcome-file>
          <welcome-file>default.jsp</welcome-file>
          </welcome-file-list>
          <filter>
          <filter-name>PageFlowJspFilter</filter-name>
          <filter-class>org.apache.beehive.netui.pageflow.PageFlowJspFilter</filter-class>
          </filter>
          <filter>
          <filter-name>PageFlowForbiddenFilter</filter-name>
          <filter-class>org.apache.beehive.netui.pageflow.PageFlowForbiddenFilter</filter-class>
          <init-param>
          <param-name>response-code</param-name>
          <param-value>404</param-value>
          </init-param>
          </filter>
          <filter-mapping>
          <filter-name>PageFlowJspFilter</filter-name>
          <url-pattern>*.jsp</url-pattern>
          <dispatcher>FORWARD</dispatcher>
          <dispatcher>REQUEST</dispatcher>
          <dispatcher>INCLUDE</dispatcher>
          </filter-mapping>
          <filter-mapping>
          <filter-name>PageFlowJspFilter</filter-name>
          <url-pattern>*.jspx</url-pattern>
          <dispatcher>FORWARD</dispatcher>
          <dispatcher>REQUEST</dispatcher>
          <dispatcher>INCLUDE</dispatcher>
          </filter-mapping>
          <filter-mapping>
          <filter-name>PageFlowForbiddenFilter</filter-name>
          <url-pattern>*.java</url-pattern>
          <dispatcher>REQUEST</dispatcher>
          </filter-mapping>
          <filter-mapping>
          <filter-name>PageFlowForbiddenFilter</filter-name>
          <url-pattern>*.jsfb</url-pattern>
          <dispatcher>REQUEST</dispatcher>
          </filter-mapping>
          <filter-mapping>
          <filter-name>PageFlowForbiddenFilter</filter-name>
          <url-pattern>*.jpfs</url-pattern>
          <dispatcher>REQUEST</dispatcher>
          </filter-mapping>
          <listener>
          <listener-class>org.apache.beehive.netui.pageflow.PageFlowContextListener</listener-class>
          </listener>
          <listener>
          <listener-class>org.apache.beehive.netui.pageflow.HttpSessionMutexListener</listener-class>
          </listener>
          <servlet>
          <servlet-name>action</servlet-name>
          <servlet-class>org.apache.beehive.netui.pageflow.PageFlowActionServlet</servlet-class>
          <init-param>
          <param-name>config</param-name>
          <param-value>/_pageflow/struts-config.xml</param-value>
          </init-param>
          <init-param>
          <param-name>debug</param-name>
          <param-value>2</param-value>
          </init-param>
          <init-param>
          <param-name>detail</param-name>
          <param-value>2</param-value>
          </init-param>
          <load-on-startup>2</load-on-startup>
          </servlet>
          <servlet>
          <servlet-name>XmlHttpRequestServlet</servlet-name>
          <servlet-class>org.apache.beehive.netui.pageflow.xmlhttprequest.XmlHttpRequestServlet</servlet-class>
          </servlet>
          <servlet-mapping>
          <servlet-name>action</servlet-name>
          <url-pattern>*.jpf</url-pattern>
          </servlet-mapping>
          <servlet-mapping>
          <servlet-name>action</servlet-name>
          <url-pattern>*.do</url-pattern>
          </servlet-mapping>
          <servlet-mapping>
          <servlet-name>XmlHttpRequestServlet</servlet-name>
          <url-pattern>*.xhr</url-pattern>
          </servlet-mapping>
          <servlet-mapping>
          <servlet-name>XmlHttpRequestServlet</servlet-name>
          <url-pattern>*.render</url-pattern>
          </servlet-mapping>
               <jsp-config>
          <taglib>
          <taglib-uri>render.tld</taglib-uri>
          <taglib-location>/WEB-INF/lib/render_taglib.jar</taglib-location>
          </taglib>
          <taglib>
          <taglib-uri>/WEB-INF/exesite.tld</taglib-uri>
          <taglib-location>/WEB-INF/exesite.tld</taglib-location>
          </taglib>
          <taglib>
          <taglib-uri>netui-tags-template.tld</taglib-uri>
          <taglib-location>/WEB-INF/netui-tags-template.tld</taglib-location>
          </taglib>
               <taglib>
          <taglib-uri>netui-tags-databinding.tld</taglib-uri>
          <taglib-location>/WEB-INF/netui-tags-databinding.tld</taglib-location>
          </taglib>
          <taglib>
          <taglib-uri>netui-tags-html.tld</taglib-uri>
          <taglib-location>/WEB-INF/netui-tags-html.tld</taglib-location>
          </taglib>
          <taglib>
          <taglib-uri>/WEB-INF/struts-bean.tld</taglib-uri>
          <taglib-location>/WEB-INF/lib/struts-bean.tld</taglib-location>
          </taglib>
          <taglib>
          <taglib-uri>/WEB-INF/struts-logic.tld</taglib-uri>
          <taglib-location>/WEB-INF/lib/struts-logic.tld</taglib-location>
          </taglib>
          <taglib>
          <taglib-uri>/WEB-INF/struts-html.tld</taglib-uri>
          <taglib-location>/WEB-INF/lib/struts-adapter-html.tld</taglib-location>
          </taglib>
          <taglib>
          <taglib-uri>um.tld</taglib-uri>
          <taglib-location>/WEB-INF/lib/um_taglib.jar</taglib-location>
          </taglib>
          </jsp-config>
          </web-app>

Problem with maps on e72

Hi everyone
I've got a problem with maps on my E72.
I've seen advert that Nokia is going to let everyone use maps for free on selected models.
I was going to buy Sat Nav for whole Europe as I travel a lot and I was going to change my old N95. I thought I could do both in one new phone. Checked all the available models and chose E72. It said it;s got GPS and you don't need to use your network and spend fortune on internet connection. Got it from eBay for £270.
I installed Ovi Maps from internet and the first thing that surprised me was it had 'only' 7-8MB.
I thought that something was wrong, maps for 72 countries couldn't be 8MB big.
After some time I managed to set my e72 up. Put my Maps on and...
It takes loads of time to find GPS connection, but the worst thing is if I type lets say Paris it doesn't find anything. Map has wholes, like suddenly the roads end and there's nothing there.
My question is what am I doing wrong? Do I need to download something more? I didn't have any maps on my phone when I bought it. Where can I find them?
If someone could help I'd appreciate it.
Thanks a lot.

I forgot to mention that when I choose a destination it keeps saying Calculating route all the time. I waited about 15 minutesand it didn't calculate anything.

Problem with maps in Mavericks on iMac

I have a problem with my Maps on Mavericks.
I can open it just fine, no crash or whatever but the map itself just won't load, whatever mode it is on. Here is the screenshot of my Maps:
As you can see, it just stays blank all the time.
I'm also running Parallels 9 and don't know if that has something to do with problem.

Spent days trying various fixes, but this is the one that did it for me. Thanks!
livetowin
Re: Problem with maps in Mavericks on iMac
Dec 8, 2013 7:14 PM (in response to robin1943)
Try this
Since my date and time were incorrect and imessage was not working as well, I tried this
1. Go to system preferences and click date and time
2. Select date and time tab
3. Uncheck "set date and time automatically" and manually enter the correct time
4. Go to time zone tab and uncheck the box there too
5. Go back to date and time tab and now check the box "set date and time automatically"
6. Then check the box in time zone as well
Now open maps and see if it works!

Weblogic Portal: Error While Deploying: VALIDATION PROBLEMS WERE FOUND

Hello friends
I am getting following error while deploying EAR on server.
“Module named 'MyEAR' failed to deploy. See Error Log view for more detail.”
Steps I followed:
1: Created one portal domain successfully and was able to start the serve after thatr.
2: Created one Portal EAR Project and added it on server.
Now when I am restarting the server, getting following error/log
**“weblogic.management.DeploymentException: VALIDATION PROBLEMS WERE FOUND**
**problem: cvc-complex-type.2.4c: Expected element 'module@http://java.sun.com/xml/ns/javaee' before the end of the content in element application@http://java.sun.com/xml/ns/javaee:<null>”**
Exception stack Trace:
java.lang.Exception: Exception received from deployment driver. See Error Log view for more detail.
at oracle.eclipse.tools.weblogic.server.internal.WlsJ2EEDeploymentHelper$DeploymentProgressListener.watch(WlsJ2EEDeploymentHelper.java:1566)
at oracle.eclipse.tools.weblogic.server.internal.WlsJ2EEDeploymentHelper.deploy(WlsJ2EEDeploymentHelper.java:470)
at oracle.eclipse.tools.weblogic.server.internal.WeblogicServerBehaviour.publishWeblogicModules(WeblogicServerBehaviour.java:1346)
at oracle.eclipse.tools.weblogic.server.internal.WeblogicServerBehaviour.publishToServer(WeblogicServerBehaviour.java:803)
at oracle.eclipse.tools.weblogic.server.internal.WeblogicServerBehaviour.publishOnce(WeblogicServerBehaviour.java:623)
at oracle.eclipse.tools.weblogic.server.internal.WeblogicServerBehaviour.publish(WeblogicServerBehaviour.java:516)
at org.eclipse.wst.server.core.model.ServerBehaviourDelegate.publish(ServerBehaviourDelegate.java:708)
at org.eclipse.wst.server.core.internal.Server.publishImpl(Server.java:2690)
at org.eclipse.wst.server.core.internal.Server$PublishJob.run(Server.java:272)
at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)
Caused by: weblogic.management.DeploymentException: VALIDATION PROBLEMS WERE FOUND
problem: cvc-complex-type.2.4c: Expected element 'module@http://java.sun.com/xml/ns/javaee' before the end of the content in element application@http://java.sun.com/xml/ns/javaee:<null>
at weblogic.application.internal.EarDeploymentFactory.findOrCreateComponentMBeans(EarDeploymentFactory.java:193)
at weblogic.application.internal.MBeanFactoryImpl.findOrCreateComponentMBeans(MBeanFactoryImpl.java:48)
at weblogic.application.internal.MBeanFactoryImpl.createComponentMBeans(MBeanFactoryImpl.java:110)
at weblogic.application.internal.MBeanFactoryImpl.initializeMBeans(MBeanFactoryImpl.java:76)
at weblogic.management.deploy.internal.MBeanConverter.createApplicationMBean(MBeanConverter.java:88)
at weblogic.management.deploy.internal.MBeanConverter.createApplicationForAppDeployment(MBeanConverter.java:66)
at weblogic.management.deploy.internal.MBeanConverter.setupNew81MBean(MBeanConverter.java:314)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.compatibilityProcessor(ActivateOperation.java:81)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.setupPrepare(AbstractOperation.java:295)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:97)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:747)
at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1216)
at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:250)
at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:159)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:157)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$000(DeploymentReceiverCallbackDeliverer.java:12)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$1.run(DeploymentReceiverCallbackDeliverer.java:45)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: weblogic.descriptor.DescriptorException: VALIDATION PROBLEMS WERE FOUND
problem: cvc-complex-type.2.4c: Expected element 'module@http://java.sun.com/xml/ns/javaee' before the end of the content in element application@http://java.sun.com/xml/ns/javaee:<null>
at weblogic.descriptor.internal.MarshallerFactory$1.evaluateResults(MarshallerFactory.java:245)
at weblogic.descriptor.internal.MarshallerFactory$1.evaluateResults(MarshallerFactory.java:231)
at weblogic.descriptor.internal.MarshallerFactory$1.createDescriptor(MarshallerFactory.java:155)
at weblogic.descriptor.BasicDescriptorManager.createDescriptor(BasicDescriptorManager.java:323)
at weblogic.application.descriptor.AbstractDescriptorLoader2.getDescriptorBeanFromReader(AbstractDescriptorLoader2.java:788)
at weblogic.application.descriptor.AbstractDescriptorLoader2.createDescriptorBean(AbstractDescriptorLoader2.java:409)
at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBeanWithoutPlan(AbstractDescriptorLoader2.java:759)
at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBean(AbstractDescriptorLoader2.java:768)
at weblogic.application.ApplicationDescriptor.getApplicationDescriptor(ApplicationDescriptor.java:301)
at weblogic.application.internal.EarDeploymentFactory.findOrCreateComponentMBeans(EarDeploymentFactory.java:178)
as it is ‘brand new ‘ – IDE generated application, weblogic-application.xml is untouched.
Thanks & Regards

I have seen this problem also. To be clear, this occurs straight out of the box. In other words - launch eclipse, create a new workspace, create a new portal EAR project with the wizard, and then try to deploy it without touching anything. In fact, try changing the portal's facets to anything, plain EAR, 11g default, Portal EAR - it doesn't matter. It will not deploy. Either you get this error or you get deployment errors complaining about missing library references in the weblogic-application.xml. Then - you have to do surgery just to get an 'out of the box' portal to run. Very frustrating.

Migration from weblogic 8 to 10.3. Validation Problem

Hi,
i encounter some problem while migrating to weblogic 10.3. I looked into the error but i do not know which file is causing the problem. Anyone encounter this problem before?
Thanks
<Dec 15, 2010 3:18:37 PM SGT> <Error> <J2EE> <BEA-160197> <Unable to load descriptor C:\WEBLOGIC10_DEPLOYMENTS\project\Project/WEB-INF/weblogic.xml of module Project.
The error is weblogic.descriptor.DescriptorException: VALIDATION PROBLEM
problem: cvc-fractionDigits-valid: Decimal fractional digits (1) of value '0.5' does not match fractionDigits facet (0) for xsdIntegerType in namespace http://java.sun.com/xml/ns/javaee:<null>
C:\bea10\user_projects\domains\csurvey\<unknown>:103:2: problem: java.lang.NumberFormatException: For input string: ".5":<<unknown>>
at weblogic.descriptor.internal.MarshallerFactory$1.evaluateResults(MarshallerFactory.java:234)
at weblogic.descriptor.internal.MarshallerFactory$1.evaluateResults(MarshallerFactory.java:221)
at weblogic.descriptor.internal.MarshallerFactory$1.createDescriptor(MarshallerFactory.java:146)
at weblogic.descriptor.BasicDescriptorManager.createDescriptor(BasicDescriptorManager.java:306)
at weblogic.application.descriptor.AbstractDescriptorLoader2.getDescriptorBeanFromReader(AbstractDescriptorLoader2.java:788)
at weblogic.application.descriptor.AbstractDescriptorLoader2.createDescriptorBean(AbstractDescriptorLoader2.java:409)
at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBeanWithoutPlan(AbstractDescriptorLoader2.java:759)
at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBean(AbstractDescriptorLoader2.java:768)
at weblogic.servlet.internal.WebAppDescriptor.getWeblogicWebAppBean(WebAppDescriptor.java:170)
at weblogic.servlet.utils.WarUtils.getWlWebAppBean(WarUtils.java:107)
at weblogic.application.compiler.WARModule.processLibraries(WARModule.java:363)
at weblogic.application.compiler.WARModule.merge(WARModule.java:450)
at weblogic.application.compiler.flow.MergeModuleFlow.compile(MergeModuleFlow.java:23)
at weblogic.application.compiler.FlowDriver$FlowStateChange.next(FlowDriver.java:69)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
at weblogic.application.compiler.FlowDriver.nextState(FlowDriver.java:36)
at weblogic.application.compiler.FlowDriver$CompilerFlowDriver.compile(FlowDriver.java:96)
at weblogic.application.compiler.ReadOnlyEarMerger.merge(ReadOnlyEarMerger.java:49)
at weblogic.application.compiler.flow.AppMergerFlow.mergeInput(AppMergerFlow.java:94)
at weblogic.application.compiler.flow.AppMergerFlow.compile(AppMergerFlow.java:47)
at weblogic.application.compiler.FlowDriver$FlowStateChange.next(FlowDriver.java:69)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
at weblogic.application.compiler.FlowDriver.nextState(FlowDriver.java:36)
at weblogic.application.compiler.FlowDriver$CompilerFlowDriver.compile(FlowDriver.java:96)
at weblogic.application.compiler.AppMerge.runBody(AppMerge.java:157)
at weblogic.utils.compiler.Tool.run(Tool.java:158)
at weblogic.utils.compiler.Tool.run(Tool.java:115)
at weblogic.application.compiler.AppMerge.merge(AppMerge.java:169)
at weblogic.deploy.api.internal.utils.AppMerger.merge(AppMerger.java:88)
at weblogic.deploy.api.internal.utils.AppMerger.getMergedApp(AppMerger.java:63)
at weblogic.deploy.api.model.internal.WebLogicDeployableObjectFactoryImpl.createDeployableObject(WebLogicDeployableObjectFactoryImpl.java:181)
at weblogic.deploy.api.model.internal.WebLogicDeployableObjectFactoryImpl.createLazyDeployableObject(WebLogicDeployableObjectFactoryImpl.java:156)
at weblogic.deploy.api.tools.SessionHelper.inspect(SessionHelper.java:661)
at com.bea.console.actions.app.install.Flow$2.execute(Flow.java:463)
at com.bea.console.utils.DeploymentUtils.runDeploymentAction(DeploymentUtils.java:4625)
at com.bea.console.actions.app.install.Flow.appSelected(Flow.java:461)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.beehive.netui.pageflow.FlowController.invokeActionMethod(FlowController.java:870)
at org.apache.beehive.netui.pageflow.FlowController.getActionMethodForward(FlowController.java:809)
at org.apache.beehive.netui.pageflow.FlowController.internalExecute(FlowController.java:478)
at org.apache.beehive.netui.pageflow.PageFlowController.internalExecute(PageFlowController.java:306)
at org.apache.beehive.netui.pageflow.FlowController.execute(FlowController.java:336)
at org.apache.beehive.netui.pageflow.internal.FlowControllerAction.execute(FlowControllerAction.java:52)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:431)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.access$201(PageFlowRequestProcessor.java:97)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor$ActionRunner.execute(PageFlowRequestProcessor.java:2044)
at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors$WrapActionInterceptorChain.continueChain(ActionInterceptors.java:64)
at org.apache.beehive.netui.pageflow.interceptor.action.ActionInterceptor.wrapAction(ActionInterceptor.java:184)
at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors$WrapActionInterceptorChain.invoke(ActionInterceptors.java:50)
at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors$WrapActionInterceptorChain.continueChain(ActionInterceptors.java:58)
at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors.wrapAction(ActionInterceptors.java:87)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processActionPerform(PageFlowRequestProcessor.java:2116)
at com.bea.console.internal.ConsolePageFlowRequestProcessor.processActionPerform(ConsolePageFlowRequestProcessor.java:255)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:556)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.process(PageFlowRequestProcessor.java:853)
at org.apache.beehive.netui.pageflow.AutoRegisterActionServlet.process(AutoRegisterActionServlet.java:631)
at org.apache.beehive.netui.pageflow.PageFlowActionServlet.process(PageFlowActionServlet.java:158)
at com.bea.console.internal.ConsoleActionServlet.process(ConsoleActionServlet.java:256)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
at com.bea.console.internal.ConsoleActionServlet.doGet(ConsoleActionServlet.java:133)
at org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1199)
at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.executeAction(ScopedContentCommonSupport.java:686)
at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.processActionInternal(ScopedContentCommonSupport.java:142)
at com.bea.portlet.adapter.scopedcontent.PageFlowStubImpl.processAction(PageFlowStubImpl.java:106)
at com.bea.portlet.adapter.NetuiActionHandler.raiseScopedAction(NetuiActionHandler.java:111)
at com.bea.netuix.servlets.controls.content.NetuiContent.raiseScopedAction(NetuiContent.java:181)
at com.bea.netuix.servlets.controls.content.NetuiContent.raiseScopedAction(NetuiContent.java:167)
at com.bea.netuix.servlets.controls.content.NetuiContent.handlePostbackData(NetuiContent.java:225)
at com.bea.netuix.nf.ControlLifecycle$2.visit(ControlLifecycle.java:180)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:324)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:130)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:395)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:352)
at com.bea.netuix.nf.Lifecycle.runInbound(Lifecycle.java:184)
at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:159)
at com.bea.netuix.servlets.manager.UIServlet.runLifecycle(UIServlet.java:388)
at com.bea.netuix.servlets.manager.UIServlet.doPost(UIServlet.java:258)
at com.bea.netuix.servlets.manager.UIServlet.service(UIServlet.java:199)
at com.bea.netuix.servlets.manager.SingleFileServlet.service(SingleFileServlet.java:251)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at com.bea.console.utils.MBeanUtilsInitSingleFileServlet.service(MBeanUtilsInitSingleFileServlet.java:54)
at weblogic.servlet.AsyncInitServlet.service(AsyncInitServlet.java:130)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3496)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2180)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2086)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
.>*

Hi, would you please post how you solved the problem?
It would be really helpful for someone with the same problem.
Greetings!

Please help me with the digital signature validation problem?

Please help me with the digital signature validation problem?

Hi
Execute the program in the Debuggin mode.
In the Debugger Window
Select Breakpoint -> Break point at -> Breakpoint at source code Menu Item and enter the details of the program/include/line no..
Activate the System Debugger On from the Settings Menu.
Hope this would help you.
Murthy
Edited by: Kalyanam Seetha Rama Murthy on Jul 18, 2008 7:20 AM

Problem in mapping while using Do not Use SOAP Envelope

Hi All,
This is wrt my thread 'Removing and adding SOAP Envelope'
I am currently working on SOAP-XI-Proxy Scenario.
For some un avoiadable reason, I had to use the option 'DO not use SOAP Envelope' .So the SOAP Envelope came withen the payload and in the pipeline, I can see the payload prefixed by '<?xml version="1.0" ?>' .
Now my payload looks like
<?xml version="1.0" ?> ( no more the encoding="utf-8" notation is there)
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"
   xmlns:xsd="http://www.w3.org/2001/XMLSchema"    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<soapenv:Body>
<Complaint_Request xmlns="urn:******createserviceticket">
<CaseNo>12345</CaseNo>
<CustomerNo>12345</CustomerNo>
</Complaint_Request>
</soapenv:Body>
</soapenv:Envelope>
To accomodate the change, I also changed my request structure as
<Complaint_Request> (My new message Type)
    <Envelope>
     <Body>
       <Complaint_Request> (My previous message Type)
        <caseNo>
        <CustomerNo>
But I am facing problem in mapping the values to the target structure (which is a flat structure),
as the payload doesnot start with ' ns1: ' notation any more . Even XSLT mapping is not working.
When I am pasting the payload in the Testing Mapping Editor, the Source Node are correctly
formed, but all come in RED . But as the root node , ie 'ns0' is not there, the value
from child nodes are not getting mapped to the target fields.
Regards,
Subhendu

Hi Joel,
SAP says, when we use the option 'DO Not Use SOAP Envelope', the payload also contains the SOAP
Envelope. So it is obvious that the payload wont start with 'ns0' notation.
So I am searching for a solution, when we use that option.
Regards,
Subhendu

Problem in mapping remoteobject on server side

Hello all
I am trying to use remoteobjects in Flex and PHP via Zend_AMF. I am having problem in mapping the data object in flex with the one in PHP.
Here's my code....
private function getAuthors(event:Event):void
     serviceRO = new RemoteObject();
     serviceRO.endpoint = "http://localhost/sampleproj/public/";
     serviceRO.destination = "zend";
     serviceRO.source = "MyService";
     serviceRO.addEventListener(FaultEvent.FAULT, faultListener);
     serviceRO.getData.addEventListener(ResultEvent.RESULT, resultListener);
Now, here's the server side directory structure that works for me....
webroot
+ sampleproj
++ public
+++ index.php (index file for the webapp)
+++ MyService.php (this is the service class)
+++ VOAuthor.php (this is the Value Object class)
Since the index file, and the service file and value object are all in same directory, it works.
This is what DOESN'T work....
webroot
+ sampleproj
++ services
+++ MyService.php (this is the service class)
++ vos
+++ VOAuthor.php (this is the Value Object class)
++ public
+++ index.php (index file for the webapp)
The error that I get is:
Channel.Connect.Failed error
Here's little of something that's going on in index.php
<?php
require_once ('C:/webtools/zendframework/zf/library/Zend/Amf/Server.php');
require_once ( realpath(dirname(__FILE__) . '/../services/MyService.php') );
$server = new Zend_Amf_Server();
$server->setClass("MyService"); // adding the class to AMF server
$server->setClassMap("VOAuthor", "VOAuthor"); // mapping the ActionScript VO to PHP VO
echo($server->handle());
?>
My guess is that in ActionScript code I have to do something with RemoteObject's endpoint.
Can anybody please help me out with this?
Thanks and Regards
ShiVik

The problem turned out to be in the php code.
Here's how I changed it
<?php
require_once ('C:/webtools/zendframework/zf/library/Zend/Amf/Server.php');
$server = new Zend_Amf_Server();
// the following methods provide the lazy loading of services and value objects
$server->addDirectory( realpath(dirname(__FILE__) . "/../services/") );
$server->addDirectory( realpath(dirname(__FILE__) . "/../vos/") );
echo($server->handle());
?>
Earlier I wasn't taking into account the change of directories for service and value object files.
Thanks and Regards
ShiVik

Problem in mapping with multiple values

Hi all,
I am facing a problem during mapping. I am explainning the problem with a example.
Suppose i have a source table named Employee which has two columns emp no and account no. I have a target table Emp_account which has also the same columns.
One employee may have more than one accounts. In source table this account nos are stored in account no column in one row corresponding to emp no. The multiple values in account no are separated by comma for one record in source table.
But in the target table Emp_account a single record will be inserted for each employee's separate account. There should not be multiple values separated by comma in account no column of target table.
So if any employee has two accounts this will be stored as one row in source table but in target table it will divided into two different rows for each account.
EMPLOYEE(Source)
emp no account no
10 101, 102
EMP_ACCOUNT(Target)
emp no account no
10 101
10 102
Think I explained the requirement.. How can i made this in OWB mapping editor..Is it possible?...Can any operator perform this task...If any of u know about this plzz give some solution..It's very important ..
Thanks & Regards,
Sumanta Das

Hi,
With reference to your question.
Can any operator perform this task..I don't think any single operator will help you.
I suggest using an intermediate (staging) table by using a PL SQL procedure with output port to store the values of account number provided the number of accounts are limited. Else use an array variable for account of an employee.
In short no simple solution because of the bad source design else the pivot/unpivot operator would have helped you.
Cheers
- Mohammed

Problem in mapping after migration from 3.x to 7.x infosource

HI Experts,
I have a problem while mapping the data source 2lis_03_bf to info cube 0ic_cs01.
we have a flow like this now after migration done.
Datasource->transfer rules->infosource->transformation->info cube
Now we dont require infosource and its respetive transformation, we are going to map directly from data source to info cube.but we have routines available in info cube related transformation.i.e. coming from infosource to info cube .
I would like to create a new transformation directly from Datasource to info cube but all the source fields are not available in target cube. How to map them.do i have to map all the target fields or i have to map according to the transfer rules target fields. what is the funda to make a transformation and mapping the source and target fields.
Could anyone please through some light here..
Thanks much in advance.

sunil kumar wrote:
Hi,
>
> As said above convert transfer rules to transformations (right click on transfer rules -> additional prop -> create transformation)
>
> Then right click on datasource -> Migrate
>
> After doing this, your datasource will be linked to Infocube directly with one transformations automatically.
>
> Regards,
> Sunil
Hi Sunil & Sravan,
THanks for ur quick reply.As you said click on transfer rules and create transformation.As i can see in my system i have a transformation from data source to infosource .i.e. starting with RSDS_ and then another transformation from info source to info cube.i.e. starting with TRCS_ . what i did was created a transformation by right click on info cube and by giving data source name as 2LIS_03_BF .this is a manual transformation i am mapping manually.Is this a correct way? Please tell me how to do it.
as i have to do this immediately.
Thanks in advance

Problem in mapping a many to many relation to a list

Hi,
I have a problem with mapping a many to many relation to a list.
I have a Many to Many relation in my database between tables baskets and products. This relation is implemented with a join table basket_products, which has two fields which correspond to the foreign keys to tables baskets and products. The join table need to have another one column "order", which defines the order of the products for the specific basket.
In my mapping I have:
@Entity
@Table(name = "baskets", uniqueConstraints = {})
public class Components implements java.io.Serializable {
@ManyToMany(cascade = { CascadeType.ALL }, fetch = FetchType.LAZY)
     @JoinTable( name="baskets_products",
                         joinColumns=@JoinColumn(name="b_id", referencedColumnName="pr_id"),
                         inverseJoinColumns=@JoinColumn(name="pr_id", referencedColumnName="pr_id"))
        //This of course doesn't work!!
       //@OrderBy(value="order")
     public List<Products> getProductses() {
          return this.productses;
     public void setProductses(
               List<Products> productses) {
          this.productses = productses;
@Entity
@Table(name = "products", uniqueConstraints = { })
public class Products implements java.io.Serializable {
@ManyToMany(cascade = { CascadeType.ALL }, fetch = FetchType.LAZY, mappedBy = "productses")
     public Set<Baskets> getBasketses() {
          return this.basketses;
     public void setBasketses(Set<Basket> basketses) {
          this.basketses = basketses;
     }In the EJB spec I read that :
"The property or field name must correspond to that of a persistent property or field of the associated
class."
What to do if I want to use a field from the join table to do the ordering of the list??
My problem is that the field "order", is not defined to the EJB container as a persistent field, so it cannot be used. But for my needs it is necessary that this field is included in the join table.
I thought that I could use the secondary table annotation to map the join table to the Baskets class, as well, so that I can define the order field, but this solution seems to me as a really wrong one.
Can anyone help me??
Thanks,
Elenh.

Hi Martin-
Can you please help me. Here are the details:
We have created an AQ in Oracle DB which will have the following message Structure:
CREATE OR REPLACE TYPE enqueue_payload AS OBJECT
( field1 VARCHAR2(100),
field2 VARCHAR2(100),
field3 DATE,
field4 VARCHAR2(100),
field5 NUMBER,
payload CLOB,
In the Payload field we are enqueing an XML message.
We have to use a OSB proxy service to dequeue the message from the AQ, transform it to another format and send to a SOA Composite.
We created a AQ Adapter in Jdeveloper 11g and imported the WSDL, XSD and .jca jca binding file into the OSB project. And configured the OSB proxy service using the WSDL imported.
However in OSB proxy service message flow when I try to create an XQUERY transformation, I see that the Payload field does not expose the structure of the XML message that is being enqueued. I even changed the message structure definition to have the payload field as XMLType. But it didn't help.
On analyzing the XSD created by AQ Adapter, I see that the payload is being defined as "string" in the XSD.
Inputs Needed
=========
1. How can we parse the payload field defined as CLOB/XMLType in OSB so that I can see the structure of the XML message it holds ?
2. Is there any in-built function in OSB to convert it to XML ?
3. Any other inputs in order to transform the XML message coming in the payload field as CLOB/XMLType
Please provide your inputs and I hope that I have clearly explained my use case.
Thanks in advance for your time and help!!
Regards,
Dibya

Problem in mapping from import manager to Data manager

hi friend's....I got a problem while mapping the data from import manager to Data manager .The problem is the data in import manager (i.e source hierarchy) will map to single filed in data manager ( i.e target hierarchy)..
Help me it will be great full to me
Regards
Yugandhar

Hi Ana,
If you have a hierarchy in this format:
N1            N2                 N3
A              A1                 A11
A              A2                 A21
A              A3                 A31
B              B1                 B11
Then u have to follow these steps for import.
1. Select source file and destination hierarchy table at top of import manager.
2. Go to Partitions tab (Second tab) Just above the tabs, if u click on the plus sign against your source file, you will see N1, N2 and N3. Cick on N1 and in partition tab, add N2 to right side by double clicking on N2.
3. Now add N3 to right side by double clicking on it.
4. Go to field mapping (Third tab). There you will see a field N1(Partition). Map this field to yourhierarchy field on destination side.
5. In value mapping (Below the field mapping), Expand your source hierarchy. Select all (ctrl + A). Click on "Add" button. Select "Add Branch as child" option.
6. Go to Matching tab (Fourth tab). only one field will be there. take ity on the right side. and select the import action as "Create".
7. Go to last tab. Click on import button.
Your hierarchy has been imported. You can check it in data manager (in hierarchy mode).
Hope this solves your problem.
Regards,
Dheeraj.

Problems with mapping after bundling messages into one XML-file

Hi all,
Case 1: one DebMas IDoc ==> XI ==> one XML-file : no problems with mapping.
Case 2: several DebMas IDoc's ==> XI ==> one XML-file : problems with mapping.
Explanation:
Incoming DebMas IDoc's:
Businesspartner 1 : no Customer Master Partner Functions (E1KNVPM).
Businesspartner 2 : Customer Master Partner Functions (E1KNVPM).
Businesspartner 3 : Customer Master Partner Functions (E1KNVPM).
Businesspartner 4 : Customer Master Partner Functions (E1KNVPM).
After bundling into one XML-file:
Businesspartner 1 : no Customer Master Partner Functions (E1KNVPM).
Businesspartner 2 : no Customer Master Partner Functions (E1KNVPM) !!!!
Businesspartner 3 : Customer Master Partner Functions of Bp 2 (E1KNVPM) !!!!.
Businesspartner 4 : Customer Master Partner Functions of Bp 3 (E1KNVPM) !!!!.
All the payloads of the IDoc's are correct.
In the message mapping we use a Container for the Partner Functions (shown as below)
Is this a serious bug in the mapping of SAP XI ?
Does anyone knows how to solve this serious problem.
E1KNVVM -
> Partner_Container
E1KNVPM -
> Partner
PARVW -
> ParnerRole
KUNN2 -
> PartnerNumber
Regards,
Theo Pijlman

Hi,
Example:
Input idoc has field F1 with occurence 0..unbnd
My input values for field F1 is
1
none
2
3
Say, I have a mapping, F1---->TargetF1
In the target only 3 TargetF1s will be created for the values 1,2,3 and nothing will be created for the field F1 with no value.
To overcome this, use collapse contexts.
F1->collapsecontexts>TargetF1
This way, the TargetF1 fields created will have the following values:
1
blank
2
3
Collapse contexts makes sure that a target is created, even if there is a context change specified at the source.
Hope this is clear.
Regards,
Smitha.

Facing problems while mapping fields in LSMW.

Hi Friends,
       i got a requirement to upload the address. Address is in
flat file.requirement is to use LSMW with object 0602 and the
standard report program is RSADRLSM02.This standard report
program uses the structures for uploading are ADR_LSM0 to
ADR_LSM6.But i have some fields in the source structure are
not at all related to the fields in destination structure(i.e ADR_LSM0 to ADR_LSM6)therefore i am facing problem while
mapping the source and destination fields.is there any other
way to map the fields.Please help me it's very urgent.
Thanks in advance.
Regards,
Sumiti Gupta.

Thanks for the reply santosh.
GIS FIELD                                      SAP LOCATION
ADDR_GID(10char)                     EXADR-KUNNR
STR_NO(10)                               ADR_LSM0-STRT_CODE
STR_NAME (42)                         ADR_LSM0-STREET
ADDRESS_UNIT(7)                     ADR_LSM0-HOUSENUM_H
                                                      and
                                                 ADR_LSM0-HOUSENUM_L
ADDRESS_UNIT_TYPE(5)           EVBSD-VBSART
POST_CODE (10)                       ADR_LSM0-POST_CODE
MUNI_NAME (40)                        EXADR-APPLDATA
MAILING_CITY(60)                      ADR_LSM0-CITY_NAME
MAP_PAGE(4)                           EADRSTRTGRID_GRID_ID
EVAC_ZONE(1)                          EVBSD-ZEVAC
PIN_NUM (18)                            EHAUD-PLTXT
in the above fields the structure with ADR_LSM0 are found with the other fields i m not able to find the similar fields in the destination structure.Please help me.
Regards,
Sumiti Gupta.

Validation problem in Mapping

Similar Messages

Maybe you are looking for