Validation Report

HELLO EXPERTS
Can you give me some ways how will i make a validation report and how will it be able to identify what fields or specific report there is unbalanced data
tnx regards
Clodualdo David

Hello Andy,
I believe the following view - APEX_APPLICATION_PAGE_VAL - includes everything you need to generate a "regular" (printable) report - .
Hope this help,
Arie.

Similar Messages

CRVS2010 Beta - Error: No valid Report Source is available

I am new to using crystal reports in .NET so any (un-jargoned) help is much welcomed and appreciated.
I am implementing an web application on a Windows XP machine using VS2010 and have downloaded and installed the CR4VS2010 beta 2 and the CRforNET40_x86. All installed OK with no errors.
I have embedded a crystal report viewer into my web page and have populated a dataset (myDS) successfully from my SQL server connection earlier in the code.
The report (stoppages.rpt) is an untyped report stored in a separate folder and has 2 datetime parameters to pass in. When I run the web app it runs fine until the parameter boxes appear - I enter 2 valid date values into the parameter boxes when I hit OK I get an error - No valid report source is available.
My code is shown below - I have searched other forums and it was suggested to put in the session.add part but the error occurs with or without this bit in...
Please help - newbie and desparate! Thanks
Dim myReportDocument = New CrystalDecisions.CrystalReports.Engine.ReportDocument()
            myReportDocument.Load("C:\Reports\stoppages.rpt")
            myReportDocument.SetDataSource(myDS)
            Session.Add("Report", myReportDocument)
            crvThisReport.ReportSource = myReportDocument
Subject modified as per the sticky post at the top of this forum; [Crystal Reports for Visual Studio 2010 Beta - read before posting|Crystal Reports for Visual Studio 2010 Beta - read before posting;
Edited by: Ludek Uher on Oct 13, 2010 7:22 AM

Hi Ludek, I tried adding
<startup useLegacyV2RuntimeActivationPolicy="true">
<supportedRuntime version="v4.0"/>
</startup>
to the config file but it didnt resolve the problems.
However I think I have found a work-around solution to setting the parameters programmatically rather than use the crystal report viewer pop-up boxes. I am posting my code to help anyone else who might be experiencing the same problems:
Dim myReportDocument = New CrystalDecisions.CrystalReports.Engine.ReportDocument()
myReportDocument.Load(Server.MapPath(strRptPath))
myDS.WriteXml(Server.MapPath(strXMLPath), XmlWriteMode.WriteSchema)
myReportDocument.SetDataSource(myDS)
myReportDocument.Refresh()
myReportDocument.SetParameterValue("DateFrom", #9/1/2010 6:35:00 AM#)
myReportDocument.SetParameterValue("DateTo", #9/8/2010 6:35:00 PM#)
crvThisReport.ReportSource = myReportDocument
DateFrom and DateTo are the parameter names within my crystal report.
It seems to be working fine, it stops the crystal report viewer from displaying the parameter pop-up box which stops the error occurring. However, the error still occurs when you want to interact with the report in other ways, ie page navigation, group tree navigation. It still allows me to print, export and zoom in and out, so I will have to disable some buttons and features until this error is resolved - the search continues!
Thanks for all your help and advise.
Edited by: juliep68 on Oct 14, 2010 11:33 PM

REP-1057: ' PATH_TO_REPORT/report.rdf' is not a valid Report Builder file.

Current Level : Report Builder 6.0.8.27.0
We migrated custom reports build on Report 2.5 to 6.0.8.27.0 on apps/db version
from 11.0.3 / 8.0.5 to 11.5.10.2/9.2.0.6. Platform was moved from HPUX to Redhat
Linux 4.
When we open migrated reports then original reports get converted and compiled
by Report Builder 6 without any problem. But once saved and when modified some
of the reports get corrupted and have 'REP-1057' error.
Anyone had any similar problem and found solution?
Thanks

I have a .rdf file. When I try to open the same in Report Builder for 6i, nothing happens! It just does not open!
I tried to convert the report into .REX from unix - I get the following error
REP-1057: 'FAIAPXINROH.rdf' is not a valid Report Builder file.
But, the report is running fine from Oracle apps.
I need to open this .rdf to change somethings.
Any suggestions?
Regards,
Arun Tirumale

Technology Stack (TXK) Rollup Validation Report

Hi Hussein,
I got this output for Autoconfig validation report:
OEM comment" from the Applications Context file is:
If you are using the Oracle Enterprise Manager from the iAS Oracle Home within the Applications install,
you must update the "OEM comment" (s_oemcomment) value in the Applications Context file to blank.
# WARNING
"Session toplevel domain comment" from the Applications Context file is:
If you are using Oracle Portal with Applications, you must update the "Session toplevel domain comment"
(s_topleveldomain_comment) value in the Applications Context file to blank.
# WARNINGIm confused which context file to edit, as there are lots located in different directories. I am afraid I might erroneously edit it or mess up the context file.
Which one do I edit?
Thanks

Im confused which context file to edit, as there are lots located in different directories. I am afraid I might erroneously edit it or mess up the context file.
Which one do I edit?The application context file under $APPL_TOP/admin directory (make sure you take a backup of the file before you edit it).
If you do not use OEM or Oracle Portal, you can simply ignore those warning messages -- See (Technology Validation Utility for Oracle Applications Release 11.5.10 [ID 277366.1]) for details.
Thanks,
Hussein

BPC 7.0MS Validation Report isn't displayed

Hello colleage,
This question is related to the following thread.
[BPC - Submitted data did not pass validation|Re: BPC - Submitted data did not pass validation;
<Procedure>
-eSubmit > Validate submission
-The message is displayed:
"Submitted data did not pass validation; you may need to resubmit it.
A Validation report cannot be generated because there is no Validation report template."
I think that Validation report can be opened on this timing.
Are there missing settings?
If you have any information or ideas, could you please help me?
<Setting>
Application Parameter
LOCKREPORT: Validate.xlt
Validation Report
eExcel\Input Schedules\Wizard\Validate.xlt
Thank you in advance.
Best regards,
Kei Ogino
Edited by: Kei Ogino on Jun 24, 2009 11:00 AM

Hi Ki Ogino,
We have tested the behaviour for the same scenario.
You get this error, if the template is opened from the /INPUT SCHEDULE/WIZARD or the template not accessible from the relevant location.
Otherwise, able to succesfully validate the data submission by both ways:
1. eSubmit :: Validate Submission
2. Send Data :: Validate Submission before sending.
The issue noticed is that data not refreshed / displayed in the input template after succesful sending into BPC database, whereas the same data can be viewed by new template or ANYBYANY report.
Setting -- APPLICATION PARAMETER for LOCKREPORT.
The report launches when submission validation for a data region is not u20180u2019 in BPC Excel. The template should be located in the eExcel\Report\ folder., though it is currently available in the path eExcel\Input Schedules\Wizard\Validate.xlt.
Try this.
Cheers
Uma

Essbase Adapter - Intersection validation report

Is it possible to enable an intersection validation report with the essbase adapter? Otherwise I dont see my errors until the export stage

No, you will need to write a custom script to accomplish this.

Foundation / Workspace in validation report failed SSO

Hi everybody.
When I run validate.bat to watch the status of my EPM System - I get one red line in Foundation / Workspace block:
Availability of login http://server.com:28080/workspace/status
Error: java.net.ConnectException: Connection refused: connect
Recommended Action: Start application
All EPM System is installed on one laptop running under Win XP SP3.
Essbase ver 11.1.2
The failure in validation report does not affect availibility of essbase server - I can work with applications through Essbase admin services console.
Please help to understand what is wrong and how to fix it.
Thanks.
Edited by: user10944635 on 17.08.2010 6:59

How did u solve it?

Technology Stack Inventory Validation Report r12.1

How do you run the Technology Stack Inventory Validation Report on R12.1?
I knew how to run it in 11i but it is not in the same place on R12.1

Thanks,
That provided some of what I was looking for but the Technology Stack Inventory Validation Report used to be
$ADPERLPRG $ORACLE_HOME/appsutil/bin/TXKScript.pl
-script=$ORACLE_HOME/appsutil/bin/txkVal11510MP.pl
-txktop=$ORACLE_HOME/appsutil
-appspass=<apps_password>
-outfile=$ORACLE_HOME/appsutil/temp/txkVal11510MP_DB.html
and the output looked like this:
Technology Validation Utility report for 11.5.10 Maintainance Pack.
===================================================================
The latest version of the Technology Validation Utility and instructions
are available in Oracle MetaLink Note 259484.1 .
Date :Mon Jun 28 16:19:52 2004
Hostname :apposf45.us.oracle.com
Node Type :Admin,Conc,DB,Web,Forms
Instance :PROD_apposf45
Platform :OSF1
DB Host :apposf45.us.oracle.com
Context File :/scratch/apps/disks/disk3/_apps_11510_ab_apps_prodappl/admin/PROD_apposf 45.xml
Report File :/scratch/disk1/_apps_11510_ab1.5/temp/txkVal11510MP.txt
Validation of Administration Server Node (apposf45):
[PASS] Database version from dbms_utility 9.2.0.3.0
[PASS] JOB_QUEUE_PROCESSES in parameter table 2
[PASS] Undo management in parameter table AUTO
[PASS] Database check confirms the fix for
materialized view
bug 2328821 has been applied.
[PASS] Amount of temporary tablespace in MB 1500
assigned to Apps Schema (determined
by querying DBA_TEMP_FILES and
DBA_USER)
[PASS] UTL_RECOMP package is found in the
database.
[PASS] The patch 2949941 for UTL_RECOMP has
been applied.
[PASS] The parallel_max_servers parameter is 8
set to
[PASS] Your Applications database contains 3.0.9.8.4
Portal version
[PASS] Your Applications database contains 3.0.9.8.4
Login Server version
Validation of Concurrent Processing Server Node (apposf45):
[PASS] 'X11 DISPLAY' parameter from the fuji01.us.oracle.com:35.0
Applications Context file
[PASS] JDK on Concurrent Processing node 1.3.1
[PASS] AF_JRE_TOP, AF_CLASSPATH and AFJVAPRG
variables are correct.
....

Source Account Validation Report

Goodmorning,
I'm building source validation rules (without problem) but a boring problem occurs:
Scenario:
Location -- E2 (source entity:00002)
|__ E6 (source entity:00006)
|__ E7 (source entity:00007)
Validation report result:
E2
Rule 1 amount 123
Rule 2 amount 456
Rule 3 (source logic account based on 00002 accounts) 789
E6
Rule 1 amount 1000 (OK)
Rule 2 amount 5000 (OK)
Rule 3 (source logic account based on 00002 accounts) 789 [duplicated]
E7
Rule 1 amount 8000 (OK)
Rule 2 amount 9000 (OK)
Rule 3 (source logic account based on 00002 accounts) 789 [duplicated]
This means that for every rule based on source account and for every Entity I've a duplicated rule.
Obviously it's wrong and I know I need source entity (00002) to build correctly my source validation rule...
Q: how can I solve this issue avoiding duplicated rules? Building the same validation rule respectively for every source entity logic account the result would be an undesired report with 9 rules instead of 3.
Thanks,
Francesco

What version was this on and did you use assign Validation Entity and Rule groups?

Schedule Cluster Validation Report

Is there a way to schedule a validation report to run once a day? We would also need to have Storage deselected in the test selection. Thanks.

Alexey provided you with references to use PowerShell. Here is where you go to learn about the task scheduler -
http://technet.microsoft.com/en-us/library/cc721871.aspx Or, if you want to use PowerShell for that part, too -
http://technet.microsoft.com/en-us/library/jj649816.aspx
Your question really is not related to Hyper-V, though. Is there some other reason you posted in the Hyper-V forum?
. : | : . : | : . tim

BPC Validation Report

Hello
I have put a control on the work statut that work find
When I do a esubmit>Validate data if there is an error a message appear that tell me I have no validation report and that administration report are maintain by administrator.
What shall I do to build a validation report ?
Thanks for help
Regards
Anne Forcinal

Hi Tim,
the office_ug mentioned that one should validate the data before submitting it, i am wondering how validation can even be done if data is not submitted into the database?
having said that, i am trying to simulate a simple validation and work status update exercise, my settings are as followed:
work status setting:
account - no - validation
category - yes
datasrc - no - totaladj
entity - owner
intco - no - all_interco
rptcurrency - no - lc
time - yes
validation rules:
validation account - remark - validation operand - other - other - applicable periods - validation tolerance
validation - testing validation - = - blank - blank - 0
validation rules details:
validation account - account1 - flow1 - sign1 - account2 - flow2 - sign2 - remark
validation - sales - blank - 1 - cost - blank - 1 - testing validation
work status:
work state - dm ...docs - controlled by
unlocked - all ... all - both
submitted - all ... all - both
approved - all ... all - both
i am just trying to validate that my "sales" and "cost" entries are the same, i tried validating before and after submitting my data using evsen(10,"finance","sales) and evsen(10,"finance","cost") respectively with the other cv values being budget, input, worldwide1, non_interco, subtotal, lc - 2007.total1 - periodic.
i received the message "submitted data did not pass validation. you may need to resubmit data" on both ocassions.
any pointers?
cheers

FDM validation report issue

Hi,
I am working on validation reports in FDM.
My logic works fine and I see result by all Entities in Validation report.
I need to see result by other dimension in validation report other than Entity dimension in FDM.
Can you let me know how can we achieve this.
Thanks in advance

Hi,
Thanks for the reply, I have placed the dimensions in the rule.. But when I see the report, it is getting displayed for every entity in the file that is processed in FDM.
But I want my report to have data for each Product dimension instead of Entity ie. sum by each product
Thanks in advance

FDM validation report with source data gives 0

Hi All,
I'm building a validation report to report on the source data (so using ~ instead of |).
I've created a logic group to sum up the amounts to a member TOTAL.
When i use the validation editor lookup screen i can browse for Entity, Account (TOTAL), UD1, UD2 and UD3.
The category, Period and Year are left blank.
When trying to test i have to select a test entity (which is the target entity dimension). However, these entities are nog in my source entities (since they are mapped).
So the lookup value gives a value of 0 while a value should be there (since i've selected all dimensions).
Any suggestions? i remember that in the past i did just select a random test entity and it did work.
We're using version 11.1.1.3.
Thanks!

Hi Tony,
What do you mean by target information.
I only retrieve source information but i have to select an entity in the test window (where only the target entities are shown).
So all fields in the import screen (except those in the pov) are defined and match the import screen members exact.
Furthermore when i click browse for the years i get an error as well..

Intersection Validation Report

Hi everybody
I'm trying to create Intersection Validation Report, but an error occurs (the usual XML/XSL issue seen in other threads).
I think in my case this error is due to MS Office absence (because on another server with the same HFM and FDM applications and Office installation it works perfectly).
My question: is it possible to generate Intersection Validation report without Excel? Through other templates for example...?
Thanks in advance
Francesco

Which version of FDM are you using. In the current versions inersedtion validation reports are not created with Excel but in XML. In earlier versions this was an option in the integration settings so you could specify to use XML Intersection validation reports instead of those generated using the Excel engine.

Intersection Validation Report error

After clicking the Validate step to get the intersection validation report (Enable Intersection Validation) is turned on, I get the following error in a new window
"The XML page cannot be displayed Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later."
Any help would be appreciated

You can't open the XML directly from the outbox. The user ID that you are accessing the file with will likeyl not have access to the directory where the XSL file is stored. The XSL file is used to translate the XML file into a viewable format.
You can copy the XSL file into a directory where you do have access and modify the XML to look to that directory.
BTW, please open new threads for your questions.
Edited by: TonyScalese on Apr 14, 2011 1:35 PM

Validation Report warnings

In my application, I have 3 processes, and a PDF form,
the 3 processes reference the PDF form,
so each time I make a change to the PDF form, I got 3 warnings in the Validation Report tab, saying that the PDF that these processes depend on has been changed.
I can get rid of those warnings manually by doing the "Validate" on those processes.
my question is, why it doesn't do the Validate automatically? and stop displaying those warnings all the time?
is there a way to let it do the Validate automatically?
thanks

Hi,
you need to run iso files at your cluster nodes often?
Well i think you need to provide iso files to your VMs. This is possible without "Virtual CloneDrive"!
I have seen many errors with this kind of software up to bluescreens.
But ok if you really need this software just ignore the warning from cluster validation report.
The cluster will work correctly if this are the only warnings from cluster validation report.
Regards
Sebastian

Validation Report

Similar Messages

Maybe you are looking for