Validation systax

Hi Experts
I wish to restrict the project types per project profile.
I have made definitions as follows:
Prerequisite: Project Profile LIKE 'Y0000001'
Check: Proj.type = 'P1'
Message: E
But i am unable to get this validation at the time of saving project structure. Please suggest correction.
In case of allowing more values, ex: p2, p3, r1, r2 etc, suggest systax for 'check'.
warm regards
ramSiva

Hi,
Prerequisite:
PROJ-PROFL = 'Y0000001'
Check:
PRPS-PRART = 'P1' OR PRPS-PRART = 'P2' OR PRPS-PRART = 'P3' OR PRPS-PRART = 'R1'
Message:
E...
Hope this helps.
Thanks
Sarang

Similar Messages

Unable to create the validation at Call up point 3

Dear Friends,
I am trying to create the validation rule for call up point 3..
while doing the prerequisite is system is not througing any error message, But while doing Check step I am getting the message like " Formula composed upto first systax error"
This is the full length message i am getting the error..
The formula was composed up to the first syntax error.
Message no. GB 506
Diagnosis
You tried to exit insert mode, which is only possible if the formula has no syntax errors from beginning to end. If it is not, a new insertion session is opened ahead of the first syntax error. You can then correct the syntax error at the new position through making new entries or by deleting the formula symbols that follow.
You can then try exiting the insertion session again.
Validation is
BKPF-TCODE = 'MIRO' and BKPF-BUKRS = '2005'
check
BSEG-BVTYP not equal to null
in this point i am getting the above mentioned message
Please let me know in this regard.
Regards,
Anand

Dear,
Callup point 3 will not be allowed in this validation because in CHECK you are just calling the BSEG (line item) so just select callup point 2 will be accurate one and it will be successful....
Callup point 3 is used when you want system to perform check for both BSEG and BKPF table fields....
To conclude use callup point 2 in this validation .
REgards,
Chintan Joshi

View data in client B from client A in the same SID without a valid logon?

Hi Folks
We are planning on upgrading our 4.6C system to ERP 6.0, and are initialy considering having two clients in the same sandbox SID. One would be for the developers to perform code remediation checks (client A), and one would contain a copy of production data for performing testing of functionality over live data (client B).
Would it be possible to view data in client B from client A in the same system without a valid logon to client B or RFC connection to client B from client A? For example via the use on an ABAP program to SQL the database?
I know one can use transactions like SM30/SM31 to view, compare, and adjust data between clients, but this requires an RFC connection and valid logon to the target client.
Regards
Kevin.

Hi Kevin.
>
Kevin McLatchie wrote:
> Would it be possible to view data in client B from client A in the same system without a valid logon to client B or RFC connection to client B from client A? For example via the use on an ABAP program to
Short answer: yes.
If someone has the right to write and execute ABAP reports on the system he is able to access the data of all clients. So I don't think that this setup is advisable. Don't mix development and production data in one system.
Best regards,
Jan

DEVOLUÇÃO DE EXPORTAÇÃO - CFOP 3201 - GRC VALIDA DADOS DI.

Boa tarde a todos!
Estamos em um projeto de NFE XML 2.00 e nos deparamos com o seguinte erro:
Ao emitirmos um NF-e de devolução da mercadoria que se encontrava no Porto (devolução de exportação - CFOP 3201), a validação do monitor GRC informa que é necessário constar os dados de importação, apesar deste processo não se tratar de importação. Os seguintes logs de validação são gerados:
Erro de validação: campo Código do fabricante estrangeiro no sistema. Campo é obrigatório e não pode ficar em branco. (campo IT_NFE_ADI-CFABRICANTE, ID campo I028)
Erro de validação: campo Nº da adição. Campo é obrigatório e não pode ficar em branco. (campo IT_NFE_ADI-NADICAO, ID campo I026)
Erro de validação: campo Nº sequencial do artigo na adição. Campo é obrigatório e não pode ficar em branco. (campo IT_NFE_ADI-NSEQADIC, ID campo I027)
Erro de validação: campo . Campo é obrigatório e não pode ficar em branco. (campo IT_NFE_IMP-CEXPORTADOR, ID campo I024)
Erro de validação: campo . Campo é obrigatório e não pode ficar em branco. (campo IT_NFE_IMP-DDESEMB, ID campo I023)
Erro de validação: campo . Campo é obrigatório e não pode ficar em branco. (campo IT_NFE_IMP-DDI, ID campo I020)
Erro de validação: campo . Campo é obrigatório e não pode ficar em branco. (campo IT_NFE_IMP-NDI, ID campo I019)
Erro de validação: campo . Campo é obrigatório e não pode ficar em branco. (campo IT_NFE_IMP-UFDESEMB, ID campo I022)
Erro de validação: campo . Campo é obrigatório e não pode ficar em branco. (campo IT_NFE_IMP-XLOCDESEMB, ID campo I021)
Estamos no SAPK-10015INSLLNFE e as seguintes notas relacionadas a validação estão aplicadas:
1493980     Validation for field xJust in cancel and skipping messages
1499921     Problem with validation after implementing SP15
1500046     Upgrade validation rule for field ID for version 2.00
1500742     Adjust validation for field NADICAO and NSEQADIC layout 2.00
1502217     Extend validation rules for , layout 2
1504379     Adjust validation for field X_CLISTSERV
1511291     Update allowed values for field E1_CPAIS for validation
1511577     Update validation rules for field VUNCOM_V20
1520861     Update validation rules for OIL_CPRODANP and OIL_UFCONS
Não encontrei nenhuma nota SAP recente para o componente SLL-NFE que seja relacionada a este problema.
Desde já agradeço pela ajuda.
Sds / Renato Penido.

Boa tarde, Fernando,
Obrigado pela pronta resposta.
Debugamos a BADI e descobrimos que os dados de importação estão sendo gravado "em branco", gerando o erro de validação no GRC, tal qual dito por você.
Aprimoramos a lógica da BADI para que a tag de importação não seja preenchida indevidamente para as notas de devolução do porto e as notas foram aprovadas.
Muito obrigado,
Renato Penido.

How do i open a web page with VeriSign Class 3 Extended Validation SSL SGC SS CA certfificate i can't open web pages with this, how do i open a web page with VeriSign Class 3 Extended Validation SSL SGC CA certfificate i can't open web pages with this

how do i open a web page with VeriSign Class 3 Extended Validation SSL SGC SS CA ?

Hi
I am not suprised no one answered your questions, there are simply to many of them. Can I suggest you read the faq on 'how to get help quickly at - http://forums.adobe.com/thread/470404.
Especially the section Don't which says -
DON'T
Don't post a series of questions in a single post. Splitting them into separate threads increases your chances of a quick answer.
PZ
www.pziecina.com

When i login it says my apple id is valid but its not an icloud id

when I try to login i get a message telling me my apple id is valid but its not an icloud id .I dont have any apple mobile priducts so i have no idea what to do.Any advice would be greatly appreciated.

You are getting this message because you are trying to create an iCloud account on a PC by signing with your Apple ID. You can only sign into an existing account on a PC. You first have to create iCloud account on an iOS device (iPhone, iPad or iPod Touch) running iOS 5 or higher, or on a Mac running OS X Lion (10.7.5) or higher. After creating your account on one of these devices you will then be able to sign into the account using this ID on your PC.

HT204053 Dear Support Team, every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud???

Dear Support Team,
Every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud?
Thanks

It is not possible to create a new iCloud account using a Windows machine. You must create the account using a Mac (10.7.5 or more) or an IOS device (iPhone etc). Once that is done you can sign into and use the account on your Windows machine.

TS1368 When I try to make a purchase at the App Store or iBook Store or iTunes an error message tells me my account is not valid at the UK store. I live in Canada so how did I get to be connected to the UK and how can I get back to Canada?

When I try to make a purchase at the App Store or iBook store or at iTunes an error message tells me my account is not valid for the UK store. I've no idea how I got connected there and I'd like help getting back to Canada where I live. Any suggestions?

Change App Store
1. Tap "Settings"
2. Tap "iTunes & App Stores"
3.Tap "View Apple ID"
4. Enter your user name and password.
5. Tap "Country/Region."
6. Tap "Change Country/Region"
7. Select the region where you are located.
8. Tap "Done".

Creating Master to show only rows for which valid entries exist in Detai

I have created a Master-Detail Form in my Apex application based off of views to tables in a private remote Database.
In the Master-Detail Creation Wizard, at the "Link Master and Detail" page, I specified that the defined Primary Key in the Master Column should be equal to the corresponding Foreign Key in the Detail Column.
My goal is to have my Master Form only display rows for which a valid corresponding entry exists in the Detail Form. Yet, the above setup returns all of the rows from the Master Table, even where the corresponding Detail entry is blank.
Can you provide some light on what I'm doing wrong, and how I can accomplish what I want to do?
Thank you!

I have created a Master-Detail Form in my Apex application based off of views to tables in a private remote Database.
In the Master-Detail Creation Wizard, at the "Link Master and Detail" page, I specified that the defined Primary Key in the Master Column should be equal to the corresponding Foreign Key in the Detail Column.
My goal is to have my Master Form only display rows for which a valid corresponding entry exists in the Detail Form. Yet, the above setup returns all of the rows from the Master Table, even where the corresponding Detail entry is blank.
Can you provide some light on what I'm doing wrong, and how I can accomplish what I want to do?
Thank you!

Validating records into a maintenance view

Hi folks!
I have a simple Z table (say ZTABLE) and a Z view based on it with some related description (say ZVIEW). The ZTABLE has a DEC field (called COEF) with 2 decimals and it should have only numbers between 0 and 1.
I set the valid interval from 0 to 1 but, as help says, it's only checked for CHAR, NUMC, DEC, INT1, INT2 and INT4 data types. Not for DEC.
Then I use an event on ZVIEW. On SE11 I went to "Table maintenance generator" - Environment - Modification - Events. So there I put the 05 event (Creating a new entry) and I programed the check. It works fine for new entries, but if you have a record on table and you want to change the COEF field you can put there any number, even outside the 0-1 range.
I tried with the 01 event (Before saving the data in the database) but it seams to be called only for last record.
Could anybody tell me what can I do?
Thanks!

Hi,
Since it is a Z TABLE..
You can directly modify the flow logic in SE51.
Go to SE51
Give the program name - SAPL + Function group name
Screen number
Press change..
In the flow logic..
Add a module after the FIELD ztable-number, in the PAI event..
Ex..
FIELD ZTABLE-NUMBER MODULE NUMBER_CHECK.
And in the module validate the number..
MODULE NUMBER_CHECK INPUT.
IF ZTABLE-NUMBER <> '0' OR
ZTABLE-NUMBER <> '1'.
MESSAGE E208(00) WITH 'Not a valid number'.
ENDIF.
ENDMODULE.
Thanks,
Naren

Mandatory item validation at a page level?

Hi,
We have a page where the list of mandatory items changes according to how some 'key' items are set by the user e.g. if they select option 1 on item 1 we need a different set of mandatory fields than if they set option 2 - setting option 1 in item 4, may imply that some further items are mandatory, In addition, some items become mandatory due to circumstances known only on the database. We have in excess of 40 items on this page. Once all mandatory items are complete, the status of the page is saved as 'complete' - the user can always save the page as 'incomplete'.
We already have a database package that can check a table row to see if it is 'complete', it knows all the circumstances for when an items becomes mandatory and can produce a list of fields and the reasons why they have failed validation.
Is it possible to call this db package during page validation and use it to perform 'item' validations i.e. identify the invalid items and place the appropriate message inline with them?

Hi,
You can create a pl/sql page validation where you call you procedure.
begin
package_k.proc_p(item1,item2,...,itemN);
end;
You should define the type of the validation, but it is very straight forward,
Regards,
Max.

Error message 'not a valid PDF document'

Hi folks,
my Z10 has trouble opening some PDF documents sent as email attachment. When I try to open them the error message appears:
Important message
The document cannot be opened because it is not a valid PDF document
There is no BES10 Service involved in my environment. Mails are synced with with active sync.
OS Version: 10.2.0.429
Any suggestion appreciated.
Best regards,
RAUMPATROUILLE

Stuffit is the only app I know of which can decompress its own format. Your Windows clients must use the free Expander to open them. Otherwise, use OS X's built in zip compression and they'll be able to open the files without the need of third party software. Right click on any item, or group of items and choose, "Compress xxx Items" (how it will read if more than one item is chosen).

I am facing error while running Quickpay in Fusion payroll that "The input value Periodicity is missing for element type KGOC_Unpaid_Absence_Amount. Enter a valid input value". Any idea?

I am facing error while running Quickpay in Fusion payroll that "The input value Periodicity is missing for element type KGOC_Unpaid_Absence_Amount. Enter a valid input value". Any idea?

This is most probably because the Periodicity input value has been configured as "Required" and no value has been input for it.
Please enter a value and try to re-run Quick Pay.

Error msg . while creating a GR w.r.t. PO --"ENTER A VALID TRADING PARTNER"

Hi ,
While creating a GR w.r.t. Purchase Order (MB01) getting a following msg:
"ENTER A VALID TRADING PARTNER "
In Vendor Master : Partner function has the vendor details
OA     Ordering Address
VN     Vendor
PI     Invoice presented by
Any thread would be helpful .
regards,
chait

Hi ,
THere is no entry in field :Trading partner LFA1 -
VBUND
ALso the vendor has acccount group : RMIT : Remit to Address
PArtner functions are maintained in vendor master viz. OA ,VN , PI .
regards,
chait

Not valid month Error Ora 01843

hi
This is an error while running a report 6i. in Oracle 8i Environment.
"Not valid month Error Ora 01843"
This report is working fine in Production. But it is not working in Development Database.
Development database is the image of Production system.
Any reason for this Error?

Dear Naseer C ,
We got similar experiences for several time.
We quried like that.
Selet moth from table;
08-AUG-1988
08-08-1988
08-08-88
We changed several time until diappear the message.
Hopefully, it will help you.
Best regards,
S!G

Validation systax

Similar Messages

Maybe you are looking for