Validation user exit at asset master data

hi all,
at asset master data creation level, if you want to validate company code vs asset class vs equipment type, how do you define validation user exit? Also, we have so many company codes. Do we have to individually validate rules for each and every company code?
Regards,
Rob

Hope the below user exits are useful:
AAPM0001 |Integration of asset accounting and plant maintenance
AINT0001 |Extended checks when posting an asset   
AIST0002 |Customer fields in asset master
Pls assign points as wa to say thanks

Similar Messages

  • User Exit - Create Asset Master Data from MIGO

    Hi Experts,
    I want to create an asset master data from Good Receipt Purchase Order, when the user saves the document, but I didn't find none user exit, BADI or BAPI that I can use.
    Cuold you help me?
    Thank a lot.
    Kind Regards
    Giampaolo

    Hi,
    Why you want to create the Asset master at the time of MIGO.
    Posting MIGO is end user activities and Creation of Asset is of Super User, he have to assign cost center plant etc in master which will not be known by the end user and can create lot of problem in later stage.
    If we create Asset it MIGO or PO level how user know that he have to post to new asset or to existing asset. This decision is of Finance person.
    If it is that important in your business process then give the authorization of Asset Master data creation to User.
    I personally feel this requirement is not feasible.
    Regards,
    Shayam

  • Profit Center Master Data - Validation - User Exit

    Hi,
    I need to add few validation to the profit center master data. If there is any user exit that I can use or is there any validation like OB28 (we have for financial accounting document) that can be used.
    Please help me out.
    Regards,
    Binay Agarwal

    We are on version 4.6C. Requirement is that while creating profit center, two fields, Budget Holder and CC Board Member field should be updated via some valid user id that exist in SAP.
    This user id would be used in work flow. This fields are free field and would accept anydata. But subsequent processes would be hindered. Same thing has been implemented for Cost center and we were able to get hold of user exit but I am struggling to find the same for profit center.
    As far as I am aware there might not be any user exit for KE51 tcode. Now only point is is there any other way (like validation) which can be setup before the data us saved so that we have control over the data being saved in these two fields.
    Regards,
    Binay Agarwal

  • Modify fixed asset master data thru migo

    Hi experts,
    I make PO with account assigment 'fixed asset'. This asset is created during the PO creation. When materials arrive more fields of that fixed asset master data are known (ie serial number). I'd like to have a way to save those data in asset during the GR without using 2 different transactions.
    In MIGO t/c i see the fixed asset number and double clicking on it i access to display asset: master data (as i was on AS03 tc).
    Do you think a way to call AS02 (change asset master data) thru MIGO exists?
    Best regards,
    Ruben

    Hi Ruben,
    Did you find a solution to your problem? I have a similar requirement.
    I was planning on using the user-exit MBCF0005 to call a pop-up screen where the user can input the serial number and from there calling the BAPI to update the asset.
    Cheers
    Wayne

  • Substitution exit for asset master is not getting triggered.

    Hi
    I have created a substitution exit program ZGGBS000 having exit U215 and U216. If the Asset affirm value is initial , then WBS elemnt value will copied to asset affirm value field in the table ANLA.But it is not getting tiggered, when i am trying i save the asset in AS01 tcode. Kindly help.
    Thanks
    Subha

    Hi,
    Please try thes exits:
    Enhancement     AIST0001     Exchange number range in master data maintenance                    
    Here we can export both   ANLA-ANLN1  ANLA-ANLN2 and Import  VALUE(I_ANLA) LIKE  ANLA STRUCTURE  ANLA
    AIST0002  Customer fields in asset master
    Alternative exits:
    AFAR0003 External changeover method
    AINT0005 Dummy for extended syntax check. Do not use.
    AISA0001 Assign Inventory Number
    TRAN0001 User exit for asset transfer
    AAPM0001 Integration of asset accounting and plant maintenance
    AIST0002 Customer fields in asset master
    AMSP0002 Determine relationship type for two company codes
    AIST0001 Exchange number range in master data maintenance
    AFAR0004 Determination of proportional values for retirement
    AINT0004 Change amount posted for certain areas
    I hope this may helpfull.
    Thank  you,
    Thanks,
    AMS

  • Custom Field in Asset Master Data

    Dear Experts,
    I want to ask about a problem I'm having when adding a new field in Asset Master Data ( AS01 & AS02 ).
    I'm adding new field on the Time-dependent Tab. I already create the exit & the new custom field, and with the help of the functional registered the new field.
    I'm using a new installed SAP GUI 7.3 .
    The problem is that the new field doesn't appear when I access the tcode unless I click on the new field location.
    The problem seem doesn't appear in SAP GUI 7.1 & 7.2.
    Is there any setting that need to be done or this is the problem with the SAP GUI 7.3
    Thank you.

    Hi Karim
    You can go through the steps below to customize the field u2018Planned. retirement onu2019
    1, AS02 -> Menu: Environment -> screen layout -> Master data -> select layout and double click on Logic field group -> Select Logic field group 2 u2018Posting informationu2019 and double click on field group rules -> Change field group 13 to u2018Suppressed entry fieldu2019.
    Alternatively
    2, Use AO21 to customize the field as above.
    Note: field u2018Planned. retirement onu2019 in asset master is connected to the function u2018Simulate up to planned retirement dateu2019 in asset reports. After field u2018Planned. retirement onu2019 of asset master data is deactivated, the function u2018Simulate up to planned retirement dateu2019 in asset report will be disabled.
    Hope itu2019s helpful
    George

  • How to add new fields in asset master data

    Hello,
    i was wonder if anyone knows how to add new fields that arent defined in the asset master data.
    Thanks.
    Pedro

    Hi Pedro,
    SAP allows entering upto 8 fields on the asset master. These fields are called 'Evaluation group'. Out of 8, 4 are four character long and others are 8 character long.
    You can configure them @ the following 3 nodes in IMG:
    Financial Accounting>Asset Accounting>Master Data-->User Fields: Define 4-Character Evaluation Groups & Define 8-Character Evaluation Groups & Change Key Words in the Evaluation Groups.
    Regards,
    Vishal Thakur

  • Fixed asset Master Data import

    Please can anyone help me resolve this error messages when importing Fixed asset master data
    "Net book value of asset must be greater or equals to zero"
    Am using SAP Business one version 9.0 pl9

    Hi Bright,
    Please check below link.
    Error message during Import of Fixed Assets after Upgrade of SAP 9.0 to PL10
    Hope this help
    Regards::::
    Atul Chakraborty

  • DI API to import fixed  asset master data and acquisition.

    Hi,
    Environment : SAP B1 8.8 PL18 & Fixed Assets Add-on 880.236.00.18
    Have been used to add fixed assets, and would like to perform using the API to import fixed  asset master data and acquisition.
    The commands to access the table of fixed assets related to the API that is available?
    Thanks.

    I have the same problem...
    Is there anyone who have tried these things?

  • Import fixed asset master data

    When I try to import fixed asset master data from an excel file to the Sap Business, a problem that I cannot identify occurs, and as a result, data is not imported. The process runs normally, data is processed but at the end an informational message says that zero data was imported. I would like to have help on this to solve this issue.

    Hi all
    Message was edited by: JEAN PIERRE LANCEAU
    Problem resolved : see the addon logfile in %temp%/sap business one logs/addonlog.txt to show errors

  • About settlement, asset master data's amount column value

    Dear Experts,
    I  build an aseet master data :   A (the amount column's value is 0 in asset master data)
    Then, I build an asset purchase order  assign to A , after I  do GR,  A's amount column's value change to 1.
    But if as follows,
    I  build two asset master data :  B and C ,
    B's asset catalog is 167200(prepay for equipment) , c's asset catalog is 153100 (normal fixed asset)
    Then , I build an asset purchase order assign to B, then do GR , B has amount 1, and then ,
    I  do t-code: AIAB , settlement B to C , I found B's amount column's value still show 1 , and C is still 0 ,
    but the asset value certainly has transfer  from B to C......
    why B's amount column's value doesn't be changed?
    I can't figured out.
    Thanks a lot in advance.
    Best Regards,
    Yacoa
    Edited by: Yacoa Chen on Mar 15, 2011 9:14 AM

    Hi
    If B is still showing value - It means values are not settled
    After AIAB - You need to run AIBU to settle the values.. Did you run AIBU??
    Br, Ajay M

  • Attaching document in the Asset master data

    Hi All,
    If want to attach the supporting document in asset master data, i.e in AS02, AS03 what are the steps that we need to follow to implement this  in SAP?
    Also while doing asset transfer, how can we transfer the attached documents?
    Please provide inputs.
    Regards,
    Jayasudha

    Hi ,
    Below is the configuration steps
    Have defined a content repository (IMG activity Maintain Content Repositories, transaction OAC0)
    · Have maintained document types with the status "active" (IMG activity Maintain document types, transaction OAC2).
    · Have defined Relationships for your object type with the status "active" (IMG activity Maintain relationships transaction OAC3)
    Procedure
    Then if you check the service object in AS02 it will be in active status.
    Regards,
    Jayasudha

  • Creation of asset master data

    hi sap gurus,
    i have a problem regarding saving of asset master data.
    while creating asset master data,-in time dependent tab the cost center it is comming correctly.but when i am saving it is giving ,the following error:
    you cannot save the asset(correct depreciation error)
    Diagnosis: you have choosen the function save.the system found an
    internal problem when calculating depreciation for a check document.
    sys responce:The asset cannot be created
    procedure:1 check the error from depreciation calculation by
    performing the function "Test doc.'again.
    2 if you cannot correct the error ,contact your sys specialist.you
    must then cancel your current processing.
    please help me regarding the problem......

    hi
    check your depreciation area settings for the asset class

  • How to activate fields under origin tab in the asset master data

    Hello Gururs,
        While creating asset master data under origin tab there are two fields in display mode . I am unable to change these fields . the fields are 1.) Asset purchase new.   2.) Purchase used. I want to check one of these two check boxes. But they are in display mode. How can i activate these two fields.
    In asset master data screen layout also i didnot find these two fields under origin category . Pls advice
    regds
    Ramachandra

    Hello Markus ,
    Thanks for your reply. I checked through Group box info then system is showing the following message .
    status - DISPLAY
    Reason - Authorization for asset view used
      In screen layout field i didnt find these two fields . Can you tell me where these settings has been done . How to change the status for these fields.
    regds
    ramachandra

  • Changes of asset master data - S_ALR_87012037

    Hi Colleagues,
    Could please help me by settings in order to see changes of asset master data ?
    I would like to know in which assets changes have been performed, in which characteristic and to know old and new value.
    There is one transaction : S_ALR_87012037 - but i cannot get horizontal look of values. I can only get vertical.
    In instruction there is shown that i should click function _ "use alv tree control" but i cannot see in my SAP version.
    is there any another option to get request display of data ?
    Thanks a lot for your response

    HI Gora,
    Standard report is the best option, but you can also use Table CDPOS:
    S_ALR_87012037 Output:
    You can also use Table CDPOS/CDHDR, in se16n.
    Regards
    Javed

Maybe you are looking for

  • How can I whitelist someone on my iCloud account?

    I enrolled in a subscription service where I was supposed to receive two different welcome emails neither of which showed up in my inbox or junk mail folder.

  • Will a Macbook pro early 2011 installation disc work on a 2007 or 2008 Macbook pro 15

    My collegue's 2007 or 2008 Macbook pro 15 inch keeps getting stuck on the apple load up screen everytime he hits the power button. He doesnt know what version it is and I forgot to write down the model number of it(Ill update May 16 at 10am PST). I t

  • I want  to display a text when button pressed

    Hi guys I want to display a text when a button is pressed , but the compiler says cannot resolve variable text ,can you please help me here is my program import  java.awt.Color .*;   import java.awt .*; import java.awt.event.*; import java.awt.event.

  • WILL this code run and please explain

    package onlinetest; public class Animal { public static void main(String[] args) { Animal cat=new Animal(); Plz explain the concept if the code runs, how come jvm is handling by creating a object of the same class in itself. It seems to be a loop...?

  • Substitution tags value

    Hi, can I get the substitution tags value used by template and assign this to a variable defined in a Unstructured template? My problem is to manage a conditioned exit action from a reports chain called by several Dynamic Pages thanks Giovanna