Validation using dictionaries and NSDictionaryControllers
Up to now I used NSArrayController for the binding of views to an NSMutableArray.Now I want to use Dictionaries instead of array -with NSDictionaryController. But the usual 'validate…' methods are not called.
What parameters must be set and in which way to get validation of new entries into a mutable dictionary?
no answer!
Similar Messages
-
Validator using logical AND or logical OR
How can I validate multiple TextInputs using logical AND or
logical OR. For example:
If TextInput1 == Null || TextInput2 == Null causes a
validation error if both are null but passes validation as long as
one field is populated or both fields are populated.
JohnYou could have a Boolean variable that is initially false,
and only becomes true when one of the TextInput becomes populated.
The variable could be set in the TextInput "change" event.
Your validation code would check the value of that Boolean
variable. -
PLC application validation using OPC and teststand
Hello
I want to test a PLC application using teststand as script generator. My idea is to use TestStand to generate testcases and verify answer (read status variables, tags)
from the PLC to confirm its code meet requirements.
So question is, can TestStand read ad write PLC tag variables, using an OPC server ?
Did anybody else use this strategy before ?
Pierre DanisPierre,
For your information, there is a new TestStand Add-on "OPC DA Connect" which adds a StepType Palette dedicated to OPC Data Access.
You can configure each step by browsing the OPC servers on your network and browsing variables within these servers.
This toolkit has free deployment licence.
Hoping this helps.
Jean-Louis SCHRICKE
├ CTA - Certified TestStand Architect (2008 & 2010 & 2014)
├ CTD - Certified TestStand Developer (2004 & 2007)
└ CLD - Certified LabVIEW Developer (2003 & 2005) -
I try to access my new Adobe Pro XI download to use it, and a message says "serial number not valid" or words to that effect. I downloaded on Friday afternoon. Why? This should have been easy.
Contact support by web chat to get your serial number issues sorted.
Mylenium -
I am trying to use eprint and when I login it says my email address isnt registered
i am trying to use eprint, it says login, login says I am not registered, so I use create function, it says my email address in already in use, so I try retrieving password, then it says email address doesnt exist. so I can not use eprint.
Hi,
I would guess this is an AIM valid Screen Name such as an Apple issued @mac.com account.
I would also guess you travel to other countries.
There have been several posts about @mac.com names and people who travel and use their Screen Name elsewhere having the name Suspended.
Can you Log in here https://settings.aim.com/ ?
Is this where you saw the Suspended message ?
For AIM issued name the answer is to change your Password as this tends to prove you own the account.
This does not work for Apple IDs used as AIM Valid Screen Names as AIM can't tell when the password is changed (They can only see it when you log in)
AIM's Suspended Account page has an email ([email protected]) on it to contact if your account remains Suspended.
However you need to be very clear that you have an Apple Issued Name and that you know that resetting the password that works for AIM Names and that you would like them to reset the account.
More recently this has been a sticking point. It seems the Contact you get does not always know about the agreement that AIM recognises Apple Issued IDs as Valid Screen Names and that the AIM servers can only view the passwords at specific times (or at least confirm them) so you changing it will make no difference and that they have to step in manually.
10:39 PM Saturday; October 20, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images." No, Seriously -
Not able to run validation using validation.xml & validator-rules.xml
Hello Friends,
I am not able to run validation using validation.xml & validator-rules.xml.
Entire code in running prefectly but no error messages are prompted.
Following is my code:
File Name : struts-config.xml
<struts-config>
<!-- Form Beans Configuration -->
<form-beans>
<form-bean name="searchForm"
type="com.solversa.SearchForm"/>
</form-beans>
<!-- Global Forwards Configuration -->
<global-forwards>
<forward name="search" path="/search.jsp"/>
</global-forwards>
<!-- Action Mappings Configuration -->
<action-mappings>
<action path="/search"
type="com.solversa.SearchAction"
name="searchForm"
scope="request"
validate="true"
input="/search.jsp">
</action>
</action-mappings>
<!-- Message Resources Configuration -->
<message-resources
parameter="ApplicationResources"/>
<!-- Validator Configuration -->
<plug-in className="org.apache.struts.validator.ValidatorPlugIn">
<set-property property="pathnames"
value="/WEB-INF/validator-rules.xml,
/WEB-INF/validation.xml"/>
</plug-in>
</struts-config>
<br> File Name : <b> validation.xml </b>
<form-validation>
<formset>
<form name="searchForm">
<field property="name" depends="minlength">
<arg key="label.search.name" position = "0"/>
<arg1 name="minlength" key="${var:minlength}" resource="false"/>
<var>
<var-name>minlength</var-name>
<var-value>5</var-value>
</var>
</field>
<field property="ssNum" depends="mask">
<arg0 key="label.search.ssNum"/>
<var>
<var-name>mask</var-name>
<var-value>^\d{3}-\d{2}-\d{4}$</var-value>
</var>
</field>
</form>
</formset>
</form-validation>
<br> File Name : <b> SearchForm.java </b>
package com.jamesholmes.minihr;
import java.util.List;
import org.apache.struts.validator.ValidatorForm;
public class SearchForm extends ValidatorForm
private String name = null;
private String ssNum = null;
private List results = null;
public void setName(String name) {
this.name = name;
public String getName() {
return name;
public void setSsNum(String ssNum) {
this.ssNum = ssNum;
public String getSsNum() {
return ssNum;
public void setResults(List results) {
this.results = results;
public List getResults() {
return results;
<br> File Name : <b> SearchAction.java </b>
package com.jamesholmes.minihr;
import java.util.ArrayList;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
import org.apache.struts.action.Action;
import org.apache.struts.action.ActionForm;
import org.apache.struts.action.ActionForward;
import org.apache.struts.action.ActionMapping;
public final class SearchAction extends Action
public ActionForward execute(ActionMapping mapping,
ActionForm form,
HttpServletRequest request,
HttpServletResponse response)
throws Exception
EmployeeSearchService service = new EmployeeSearchService();
ArrayList results;
SearchForm searchForm = (SearchForm) form;
// Perform employee search based on what criteria was entered.
String name = searchForm.getName();
if (name != null && name.trim().length() > 0) {
results = service.searchByName(name);
} else {
results = service.searchBySsNum(searchForm.getSsNum().trim());
// Place search results in SearchForm for access by JSP.
searchForm.setResults(results);
// Forward control to this Action's input page.
return mapping.getInputForward();
<br> File Name : <b> EmployeeSearchService.java </b>
package com.jamesholmes.minihr;
import java.util.ArrayList;
public class EmployeeSearchService
/* Hard-coded sample data. Normally this would come from a real data
source such as a database. */
private static Employee[] employees =
new Employee("Bob Davidson", "123-45-6789"),
new Employee("Mary Williams", "987-65-4321"),
new Employee("Jim Smith", "111-11-1111"),
new Employee("Beverly Harris", "222-22-2222"),
new Employee("Thomas Frank", "333-33-3333"),
new Employee("Jim Davidson", "444-44-4444")
// Search for employees by name.
public ArrayList searchByName(String name) {
ArrayList resultList = new ArrayList();
for (int i = 0; i < employees.length; i++) {
if (employees.getName().toUpperCase().indexOf(name.toUpperCase()) != -1) {
resultList.add(employees[i]);
return resultList;
// Search for employee by social security number.
public ArrayList searchBySsNum(String ssNum) {
ArrayList resultList = new ArrayList();
for (int i = 0; i < employees.length; i++) {
if (employees[i].getSsNum().equals(ssNum)) {
resultList.add(employees[i]);
return resultList;
<br> File Name : <b> Employee.java </b>
package com.solversa;
public class Employee
private String name;
private String ssNum;
public Employee(String name, String ssNum) {
this.name = name;
this.ssNum = ssNum;
public void setName(String name) {
this.name = name;
public String getName() {
return name;
public void setSsNum(String ssNum) {
this.ssNum = ssNum;
public String getSsNum() {
return ssNum;
Pls help me out.
Not able to prompt errors.Hello Friends,
I am not able to run validation using
validation.xml & validator-rules.xml.
Entire code in running prefectly but no error
messages are prompted.
Following is my code:
File Name : struts-config.xml
<struts-config>
<!-- Form Beans Configuration -->
<form-beans>
<form-bean name="searchForm"
type="com.solversa.SearchForm"/>
ans>
<!-- Global Forwards Configuration -->
<global-forwards>
<forward name="search" path="/search.jsp"/>
global-forwards>
<!-- Action Mappings Configuration -->
<action-mappings>
<action path="/search"
type="com.solversa.SearchAction"
name="searchForm"
scope="request"
validate="true"
input="/search.jsp">
tion>
</action-mappings>
<!-- Message Resources Configuration -->
<message-resources
parameter="ApplicationResources"/>
<!-- Validator Configuration -->
<plug-in
className="org.apache.struts.validator.ValidatorPlugI
">
<set-property property="pathnames"
value="/WEB-INF/validator-rules.xml,
/WEB-INF/validation.xml"/>
>
</struts-config>
<br> File Name : <b> validation.xml </b>
<form-validation>
<formset>
<form name="searchForm">
<field property="name" depends="minlength">
<arg key="label.search.name" position = "0"/>
<arg1 name="minlength" key="${var:minlength}"
resource="false"/>
<var>
<var-name>minlength</var-name>
<var-value>5</var-value>
</var>
</field>
<field property="ssNum" depends="mask">
<arg0 key="label.search.ssNum"/>
<var>
<var-name>mask</var-name>
<var-value>^\d{3}-\d{2}-\d{4}$</var-value>
</var>
</field>
/form>
</formset>
form-validation>
<br> File Name : <b> SearchForm.java </b>
package com.jamesholmes.minihr;
import java.util.List;
import org.apache.struts.validator.ValidatorForm;
public class SearchForm extends ValidatorForm
private String name = null;
private String ssNum = null;
private List results = null;
public void setName(String name) {
this.name = name;
public String getName() {
return name;
public void setSsNum(String ssNum) {
this.ssNum = ssNum;
public String getSsNum() {
return ssNum;
public void setResults(List results) {
this.results = results;
public List getResults() {
return results;
<br> File Name : <b> SearchAction.java </b>
package com.jamesholmes.minihr;
import java.util.ArrayList;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
import org.apache.struts.action.Action;
import org.apache.struts.action.ActionForm;
import org.apache.struts.action.ActionForward;
import org.apache.struts.action.ActionMapping;
public final class SearchAction extends Action
public ActionForward execute(ActionMapping
mapping,
ActionForm form,
HttpServletRequest request,
HttpServletResponse response)
throws Exception
EmployeeSearchService service = new
EmployeeSearchService();
ArrayList results;
SearchForm searchForm = (SearchForm) form;
// Perform employee search based on what criteria
was entered.
String name = searchForm.getName();
if (name != null && name.trim().length() > 0) {
results = service.searchByName(name);
else {
results =
service.searchBySsNum(searchForm.getSsNum().trim());
// Place search results in SearchForm for access
by JSP.
searchForm.setResults(results);
// Forward control to this Action's input page.
return mapping.getInputForward();
<br> File Name : <b> EmployeeSearchService.java </b>
package com.jamesholmes.minihr;
import java.util.ArrayList;
public class EmployeeSearchService
/* Hard-coded sample data. Normally this would come
from a real data
source such as a database. */
ivate static Employee[] employees =
new Employee("Bob Davidson", "123-45-6789"),
new Employee("Mary Williams", "987-65-4321"),
new Employee("Jim Smith", "111-11-1111"),
new Employee("Beverly Harris", "222-22-2222"),
new Employee("Thomas Frank", "333-33-3333"),
new Employee("Jim Davidson", "444-44-4444")
// Search for employees by name.
public ArrayList searchByName(String name) {
ArrayList resultList = new ArrayList();
for (int i = 0; i < employees.length; i++) {
if
(employees.getName().toUpperCase().indexOf(name.toU
pperCase()) != -1) {
resultList.add(employees[i]);
return resultList;
// Search for employee by social security number.
public ArrayList searchBySsNum(String ssNum) {
ArrayList resultList = new ArrayList();
for (int i = 0; i < employees.length; i++) {
if (employees[i].getSsNum().equals(ssNum)) {
resultList.add(employees[i]);
return resultList;
<br> File Name : <b> Employee.java </b>
package com.solversa;
public class Employee
private String name;
private String ssNum;
public Employee(String name, String ssNum) {
this.name = name;
this.ssNum = ssNum;
public void setName(String name) {
this.name = name;
public String getName() {
return name;
public void setSsNum(String ssNum) {
this.ssNum = ssNum;
public String getSsNum() {
return ssNum;
Pls help me out.
Not able to prompt errors.
Hi,
Your error message are not displaying because u does not made Message-Resoucrce property file (Resource Bundle) when you make it .
give it entry in
struts-config.xml
<message-resources parameter="ApplicationResources" />
and
define key and corresponding error message to key in this ApplicationResources i.e
#Error Resources
label.search.ssNum=Plz Enter correct ssNum -
How to get values from a table(in jsp) for validation using javascript.
hi,
this is praveen,pls tell me the procedure to get values from a table(in jsp) for validation using javascript.
thank you in advance.Yes i did try the same ..
BEGIN
select PROD_tYPE into :P185_OFF_CITY from
magcrm_setup where atype = 'CITY' ;
:p185_OFF_CITY := 'XXX';
insert into mtest values ('inside foolter');
END;
When i checked the mtest table it shos me the row inserted...
inside foolter .. Now this means everything did get execute properly
But still the vallue of off_city is null or emtpy...
i check the filed and still its empty..
while mtest had those records..seems like some process is cleaining the values...but cant see such process...
a bit confused..here..I tried on Load after footer...
tried chaning the squence number of process ..but still it doesnt help
some how the session variables gets changed...and it is changed to empty
Edited by: pauljohny on Jan 3, 2012 2:01 AM
Edited by: pauljohny on Jan 3, 2012 2:03 AM -
i am trying to use ichat and when I try to log in it says my account has been suspended bc of suspicious use...help
Hi,
I would guess this is an AIM valid Screen Name such as an Apple issued @mac.com account.
I would also guess you travel to other countries.
There have been several posts about @mac.com names and people who travel and use their Screen Name elsewhere having the name Suspended.
Can you Log in here https://settings.aim.com/ ?
Is this where you saw the Suspended message ?
For AIM issued name the answer is to change your Password as this tends to prove you own the account.
This does not work for Apple IDs used as AIM Valid Screen Names as AIM can't tell when the password is changed (They can only see it when you log in)
AIM's Suspended Account page has an email ([email protected]) on it to contact if your account remains Suspended.
However you need to be very clear that you have an Apple Issued Name and that you know that resetting the password that works for AIM Names and that you would like them to reset the account.
More recently this has been a sticking point. It seems the Contact you get does not always know about the agreement that AIM recognises Apple Issued IDs as Valid Screen Names and that the AIM servers can only view the passwords at specific times (or at least confirm them) so you changing it will make no difference and that they have to step in manually.
10:39 PM Saturday; October 20, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images." No, Seriously -
Problem in using AVTransmit2 and AVReceive2
Hello,
I am very new to JMF. I start to work on it and i teke sample example from http://java.sun.com/products/java-media/jmf/2.1.1/solutions/AVTransmit.html and http://java.sun.com/products/java-media/jmf/2.1.1/solutions/AVReceive.html.
In AVTransmit i pass parameter as AVTransmit2 file://F://Songs//MalgudiDays.mp3 192.168.19.51 42050
at receiving side AVReceive2 192.168.19.51/42050 192.168.19.29/42506.
Here 192.168.19.29 is sender and 192.168.19.51 is receiver.
I check that all used ports are free.
here is my output :
AVTransmit2.java Side
Track 0 is set to transmit as:
mpegaudio/rtp, 44100.0 Hz, 16-bit, Stereo, LittleEndian, Signed, 16000.0 frame rate, FrameSize=32768 bits
Created RTP session: 192.168.19.51 42050
Start transmission for 60 seconds...
...transmission ended.
Process completed.
AVReceive2.java Side
- Open RTP session for: addr: 192.168.19.51 port: 42050 ttl: 1
- Open RTP session for: addr: 192.168.19.29 port: 42506 ttl: 1
- Waiting for RTP data to arrive...
- Recevied new RTP stream: mpegaudio/rtp, Unknown Sample Rate
The sender of this stream had yet to be identified.
AVReceive2 internal error: javax.media.ControllerErrorEvent[source=com.sun.media.content.unknown.Handler@fa3ac1,message=Internal module com.sun.media.BasicRendererModule@1c39a2d: failed to handle a data format change!]
Exiting AVReceive2
Process completed.
Please Can anyone guide me to identify my mistake.
Thank you in advance.Navid,
JHeadstart checks whether the attribute definition is queryable before adding it to the list of advanced search attributes. A transient VO attribute can still be set to queryable, for a transient EO attribute this is not possible. We will remove this check on queryability in the upcoming patch release, since you have a valid use case. For now, you can subclass JhsSearchBean and override method createArgumentListForAdvancedSearch and comment out the check for "def.isQueryable()".
Steven Davelaar,
JHeadstart Team. -
Using slim and xfce4, something crashes on exit
I recently did a fresh install of Arch onto an older PC that I have. It's running a P4 3.06GHz, an nVidia GeForce FX 5900, and 1GB RAM. Because of the lower resources, I decided to use xfce4 and slim. I have a monitor and TV hooked up through s-video with the "seperate X screen" option. Whenever I logout of xfce (this includes, logout, reboot, shutdown), it goes to a blank black screen with a cursor at the top left and just hangs. I have slim configured to run from inittab, so it picks up after a couple seconds. However, if I run startx from console, and then logout of xfce the system just hangs and wont accept any keyboard input (including ctrl+alt+function to switch run levels). Also, if I choose to shutdown or reboot, the system will do so but the only thing I see is the blank screen until the POST. If I do a startx from console, the logout, I'm able to ssh in from my laptop, login and issue a reboot (again the screen doesn't change until the POST). Also, if I turn the "seperate x screen" option off, and just run the desktop on the monitor, it doesn't freeze. I've worked my way through a number of issues so far, but this one has me completely stumped. I'm not sure if there's something wrong with my configuration or if it's just a problem with the graphics driver. Any advice and/or help is greatly appreciated.
Here are configuration and log files:
Xorg.conf
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder75) Wed Jan 27 03:03:53 PST 2010
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
Option "BlankTime" "0"
Option "StandbyTime" "0"
Option "SuspendTime" "0"
Option "OffTime" "0"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "glx"
Load "dri2"
Load "dri"
Load "dbe"
Load "record"
Load "extmod"
EndSection
Section "ServerFlags"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
Option "DPI" "95 x 96"
ModelName "CMO CMC 17 AD"
HorizSync 30.0 - 82.0
VertRefresh 50.0 - 75.0
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Unknown"
ModelName "TV-0"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "NV35 [GeForce FX 5900]"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce FX 5900"
BusID "PCI:1:0:0"
Screen 0
EndSection
Section "Device"
Identifier "Videocard1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce FX 5900"
BusID "PCI:1:0:0"
Screen 1
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "TwinViewXineramaInfoOrder" "CRT-0"
Option "metamodes" "CRT: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Videocard1"
Monitor "Monitor1"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "TV: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
slim.conf
# Path, X server and arguments (if needed)
# Note: -xauth $authfile is automatically appended
default_path ./:/bin:/usr/bin:/usr/local/bin
default_xserver /usr/bin/X
xserver_arguments -nolisten tcp vt07
# Commands for halt, login, etc.
halt_cmd /sbin/shutdown -h now
reboot_cmd /sbin/shutdown -r now
console_cmd /usr/bin/xterm -C -fg white -bg black +sb -T "Console login" -e /bin/sh -c "/bin/cat /etc/issue; exec /bin/login"
#suspend_cmd /usr/sbin/suspend
# Full path to the xauth binary
xauth_path /usr/bin/xauth
# Xauth file for server
authfile /var/run/slim.auth
# Activate numlock when slim starts. Valid values: on|off
# numlock on
# Hide the mouse cursor (note: does not work with some WMs).
# Valid values: true|false
# hidecursor false
# This command is executed after a succesful login.
# you can place the %session and %theme variables
# to handle launching of specific commands in .xinitrc
# depending of chosen session and slim theme
# NOTE: if your system does not have bash you need
# to adjust the command according to your preferred shell,
# i.e. for freebsd use:
# login_cmd exec /bin/sh - ~/.xinitrc %session
login_cmd exec /bin/bash -login ~/.xinitrc %session
# Commands executed when starting and exiting a session.
# They can be used for registering a X11 session with
# sessreg. You can use the %user variable
sessionstart_cmd /usr/bin/sessreg -a -l $DISPLAY %user
sessionstop_cmd /usr/bin/sessreg -d -l $DISPLAY %user
# Start in daemon mode. Valid values: yes | no
# Note that this can be overriden by the command line
# options "-d" and "-nodaemon"
# daemon yes
# Available sessions (first one is the default).
# The current chosen session name is replaced in the login_cmd
# above, so your login command can handle different sessions.
# see the xinitrc.sample file shipped with slim sources
sessions xfce4,icewm,wmaker,blackbox
# Executed when pressing F11 (requires imagemagick)
screenshot_cmd import -window root /slim.png
# welcome message. Available variables: %host, %domain
welcome_msg Welcome to %host
# Session message. Prepended to the session name when pressing F1
# session_msg Session:
# shutdown / reboot messages
shutdown_msg The system is halting...
reboot_msg The system is rebooting...
# default user, leave blank or remove this line
# for avoid pre-loading the username.
default_user desktopuser
# Focus the password field on start when default_user is set
# Set to "yes" to enable this feature
focus_password yes
# Automatically login the default user (without entering
# the password. Set to "yes" to enable this feature
auto_login yes
# current theme, use comma separated list to specify a set to
# randomly choose from
current_theme default
# Lock file
lockfile /var/lock/slim.lock
# Log file
logfile /var/log/slim.log
slim.log isolated reboot
/usr/bin/xauth: creating new authority file /var/run/slim.auth
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.7.5.902 (1.7.6 RC 2)
Release Date: 2010-03-12
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.33-ARCH i686
Current Operating System: Linux ArchDaemon 2.6.32-ARCH #1 SMP PREEMPT Mon Mar 15 20:08:25 UTC 2010 i686
Kernel command line: root=/dev/disk/by-uuid/49d062ba-9f7b-4d18-98f2-87249f723889 ro 5 acpi_enforce_resources=lax vga=771
Build Date: 13 March 2010 07:33:22PM
Current version of pixman: 0.16.6
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 19 14:07:00 2010
(==) Using config file: "/etc/X11/xorg.conf"
/usr/bin/xauth: creating new authority file /home/desktopuser/.Xauthority
/usr/bin/startxfce4: X server already running on display :0.0
/tmp/xrdb_dysqQd:1: error: Unknown #directive "Those"
# Those are fallback settings, use the ui plugin to change it
/tmp/xrdb_dysqQd:2: error: Unknown #directive "or"
# or add your overrides to ~/.Xresources
/tmp/xrdb_dysqQd:3: error: Unknown #directive "Xft"
# Xft.hintstyle: hintnone/hintslight/hintmedium/hintfull
/tmp/xrdb_dysqQd:4: error: Unknown #directive "Xft"
# Xft hinting: 1/0
4 errors in preprocessor.
xrdb: "Xft.hinting" on line 9 overrides entry on line 6
xrdb: "Xft.hintstyle" on line 11 overrides entry on line 7
/tmp/xrdb_dysqQd:1: error: Unknown #directive "Those"
# Those are fallback settings, use the ui plugin to change it
/tmp/xrdb_dysqQd:2: error: Unknown #directive "or"
# or add your overrides to ~/.Xresources
/tmp/xrdb_dysqQd:3: error: Unknown #directive "Xft"
# Xft.hintstyle: hintnone/hintslight/hintmedium/hintfull
/tmp/xrdb_dysqQd:4: error: Unknown #directive "Xft"
# Xft hinting: 1/0
4 errors in preprocessor.
xrdb: "Xft.hinting" on line 9 overrides entry on line 6
xrdb: "Xft.hintstyle" on line 11 overrides entry on line 7
Agent pid 1617
xfdesktop[1637]: starting up
(xfce4-settings-helper:1639): GLib-GObject-CRITICAL **: g_param_spec_flags: assertion `G_TYPE_IS_FLAGS (flags_type)' failed
(xfce4-settings-helper:1639): GLib-GObject-CRITICAL **: g_object_class_install_property: assertion `G_IS_PARAM_SPEC (pspec)' failed
slim.log isolated logout
slim: waiting for X server to shut down..........
slim: X server slow to shut down, sending KILL signal.
slim: waiting for server to die
/usr/bin/xauth: creating new authority file /var/run/slim.auth
slim: waiting for X server to begin accepting connections
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.7.5.902 (1.7.6 RC 2)
Release Date: 2010-03-12
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.33-ARCH i686
Current Operating System: Linux ArchDaemon 2.6.32-ARCH #1 SMP PREEMPT Mon Mar 15 20:08:25 UTC 2010 i686
Kernel command line: root=/dev/disk/by-uuid/49d062ba-9f7b-4d18-98f2-87249f723889 ro 5 acpi_enforce_resources=lax vga=771
Build Date: 13 March 2010 07:33:22PM
Current version of pixman: 0.16.6
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 19 14:01:03 2010
(==) Using config file: "/etc/X11/xorg.conf"
Xorg.0.log
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.7.5.902 (1.7.6 RC 2)
Release Date: 2010-03-12
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.33-ARCH i686
Current Operating System: Linux ArchDaemon 2.6.32-ARCH #1 SMP PREEMPT Mon Mar 15 20:08:25 UTC 2010 i686
Kernel command line: root=/dev/disk/by-uuid/49d062ba-9f7b-4d18-98f2-87249f723889 ro 5 acpi_enforce_resources=lax vga=771
Build Date: 13 March 2010 07:33:22PM
Current version of pixman: 0.16.6
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 19 18:39:41 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Videocard0"
(**) |-->Screen "Screen1" (1)
(**) | |-->Monitor "Monitor1"
(**) | |-->Device "Videocard1"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "BlankTime" "0"
(**) Option "StandbyTime" "0"
(**) Option "SuspendTime" "0"
(**) Option "OffTime" "0"
(**) Option "Xinerama" "0"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x81e4c40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7
(--) PCI:*(0:1:0:0) 10de:0331:0000:0000 nVidia Corporation NV35 [GeForce FX 5900] rev 161, Mem @ 0xfd000000/16777216, 0xe0000000/134217728, BIOS @ 0x????????/131072
(--) PCI: (0:2:10:0) 4444:0016:0070:b7f3 Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder rev 1, Mem @ 0xf0000000/67108864
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 173.14.25 Wed Jan 27 02:59:37 PST 2010
(II) Loading extension GLX
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.5.902, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.5.902, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.5.902, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.5.902, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.5.902, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver 173.14.25 Wed Jan 27 02:34:38 PST 2010
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.5.902, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules/libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.7.5.902, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "TwinView" "0"
(**) NVIDIA(0): Option "MetaModes" "CRT: nvidia-auto-select +0+0"
(**) NVIDIA(0): Option "TwinViewXineramaInfoOrder" "CRT-0"
(**) NVIDIA(0): Option "DPI" "95 x 96"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce FX 5900 (NV35) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 131072 kBytes
(--) NVIDIA(0): VideoBIOS: 04.35.20.18.04
(II) NVIDIA(0): Detected AGP rate: 8X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce FX 5900 at PCI:1:0:0:
(--) NVIDIA(0): CMO CMC 17" AD (CRT-0)
(--) NVIDIA(0): NVIDIA TV Encoder (TV-0)
(--) NVIDIA(0): CMO CMC 17" AD (CRT-0): 400.0 MHz maximum pixel clock
(--) NVIDIA(0): NVIDIA TV Encoder (TV-0): 400.0 MHz maximum pixel clock
(--) NVIDIA(0): TV encoder: NVIDIA
(II) NVIDIA(0): Display Device found referenced in MetaMode: CRT-0
(II) NVIDIA(0): Assigned Display Device: CRT-0
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "CRT:nvidia-auto-select+0+0"
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
(**) NVIDIA(0): DPI set to (95, 96); computed from "DPI" X config option
(==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(**) NVIDIA(1): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(1): RGB weight 888
(==) NVIDIA(1): Default visual is TrueColor
(==) NVIDIA(1): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(1): Option "TwinView" "0"
(**) NVIDIA(1): Option "MetaModes" "TV: nvidia-auto-select +0+0"
(**) NVIDIA(1): Enabling RENDER acceleration
(II) NVIDIA(1): NVIDIA GPU GeForce FX 5900 (NV35) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(1): Memory: 131072 kBytes
(--) NVIDIA(1): VideoBIOS: 04.35.20.18.04
(II) NVIDIA(1): Detected AGP rate: 8X
(--) NVIDIA(1): Interlaced video modes are supported on this GPU
(--) NVIDIA(1): Connected display device(s) on GeForce FX 5900 at PCI:1:0:0:
(--) NVIDIA(1): CMO CMC 17" AD (CRT-0)
(--) NVIDIA(1): NVIDIA TV Encoder (TV-0)
(--) NVIDIA(1): CMO CMC 17" AD (CRT-0): 400.0 MHz maximum pixel clock
(--) NVIDIA(1): NVIDIA TV Encoder (TV-0): 400.0 MHz maximum pixel clock
(--) NVIDIA(1): TV encoder: NVIDIA
(II) NVIDIA(1): Display Device found referenced in MetaMode: TV-0
(II) NVIDIA(1): Assigned Display Device: TV-0
(II) NVIDIA(1): Validated modes:
(II) NVIDIA(1): "TV:nvidia-auto-select+0+0"
(II) NVIDIA(1): Virtual screen size determined to be 1024 x 768
(==) NVIDIA(1): DPI set to (75, 75); computed from built-in default
(==) NVIDIA(1): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) NVIDIA(0): Initialized AGP GART.
(II) NVIDIA(0): Unable to connect to the ACPI daemon; the ACPI daemon may not
(II) NVIDIA(0): be running or the "AcpidSocketPath" X configuration option
(II) NVIDIA(0): may not be set correctly. When the ACPI daemon is
(II) NVIDIA(0): available, the NVIDIA X driver can use it to receive ACPI
(II) NVIDIA(0): events. For details, please see the "ConnectToAcpid" and
(II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
(II) NVIDIA(0): Config Options in the README.
(II) NVIDIA(0): Setting mode "CRT:nvidia-auto-select+0+0"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(==) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(==) RandR enabled
(II) NVIDIA(1): Initialized AGP GART.
(II) NVIDIA(1): Unable to connect to the ACPI daemon; the ACPI daemon may not
(II) NVIDIA(1): be running or the "AcpidSocketPath" X configuration option
(II) NVIDIA(1): may not be set correctly. When the ACPI daemon is
(II) NVIDIA(1): available, the NVIDIA X driver can use it to receive ACPI
(II) NVIDIA(1): events. For details, please see the "ConnectToAcpid" and
(II) NVIDIA(1): "AcpidSocketPath" X configuration options in Appendix B: X
(II) NVIDIA(1): Config Options in the README.
(II) NVIDIA(1): Setting mode "TV:nvidia-auto-select+0+0"
(II) NVIDIA(1): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(1): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(1): Backing store disabled
(==) NVIDIA(1): Silken mouse enabled
(==) NVIDIA(1): DPMS enabled
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Microsoft Microsoft Wireless Optical Desktop® 1.00
(**) Microsoft Microsoft Wireless Optical Desktop® 1.00: always reports core events
(**) Microsoft Microsoft Wireless Optical Desktop® 1.00: Device: "/dev/input/event6"
(II) Microsoft Microsoft Wireless Optical Desktop® 1.00: Found 9 mouse buttons
(II) Microsoft Microsoft Wireless Optical Desktop® 1.00: Found scroll wheel(s)
(II) Microsoft Microsoft Wireless Optical Desktop® 1.00: Found relative axes
(II) Microsoft Microsoft Wireless Optical Desktop® 1.00: Found x and y relative axes
(II) Microsoft Microsoft Wireless Optical Desktop® 1.00: Found keys
(II) Microsoft Microsoft Wireless Optical Desktop® 1.00: Configuring as mouse
(II) Microsoft Microsoft Wireless Optical Desktop® 1.00: Configuring as keyboard
(**) Microsoft Microsoft Wireless Optical Desktop® 1.00: YAxisMapping: buttons 4 and 5
(**) Microsoft Microsoft Wireless Optical Desktop® 1.00: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Microsoft Microsoft Wireless Optical Desktop® 1.00" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Microsoft Microsoft Wireless Optical Desktop® 1.00: (accel) keeping acceleration scheme 1
(**) Microsoft Microsoft Wireless Optical Desktop® 1.00: (accel) acceleration profile 0
(II) Microsoft Microsoft Wireless Optical Desktop® 1.00: initialized for relative axes.
(II) config/hal: Adding input device Microsoft Microsoft Wireless Optical Desktop® 1.00
(**) Microsoft Microsoft Wireless Optical Desktop® 1.00: always reports core events
(**) Microsoft Microsoft Wireless Optical Desktop® 1.00: Device: "/dev/input/event5"
(II) Microsoft Microsoft Wireless Optical Desktop® 1.00: Found keys
(II) Microsoft Microsoft Wireless Optical Desktop® 1.00: Configuring as keyboard
(II) XINPUT: Adding extended input device "Microsoft Microsoft Wireless Optical Desktop® 1.00" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event2"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
errors from errors.log, this stuff just repeats
Mar 19 15:44:43 ArchDaemon kernel: ACPI: I/O resource smsc47m1 [0x680-0x6ff] conflicts with ACPI region IOPM [0x680-0x6ff]
Mar 19 18:39:21 ArchDaemon kernel: ivtv0: Unable to open firmware v4l-cx2341x-enc.fw (must be 376836 bytes)
Mar 19 18:39:21 ArchDaemon kernel: ivtv0: Did you put the firmware in the hotplug firmware directory?
Mar 19 18:39:21 ArchDaemon kernel: ivtv0: Unable to open firmware v4l-cx2341x-enc.fw (must be 376836 bytes)
Mar 19 18:39:21 ArchDaemon kernel: ivtv0: Did you put the firmware in the hotplug firmware directory?
Mar 19 18:39:21 ArchDaemon kernel: ivtv0: Failed to initialize on minor 3
Mar 19 18:39:21 ArchDaemon kernel: ivtv0: Failed to initialize on minor 0
Mar 19 18:39:21 ArchDaemon kernel: ivtv0: Failed to initialize on minor 1
Mar 19 18:39:21 ArchDaemon kernel: ivtv0: Failed to initialize on minor 2
Mar 19 18:39:22 ArchDaemon kernel: ivtv0: Failed to initialize on minor 2
Mar 19 18:39:22 ArchDaemon kernel: ivtv0: Failed to initialize on minor 0
Mar 19 18:39:22 ArchDaemon kernel: ivtv0: Failed to initialize on minor 3
Mar 19 18:39:22 ArchDaemon kernel: ivtv0: Failed to initialize on minor 1
Mar 19 18:39:22 ArchDaemon kernel: sd 4:0:0:0: [sdb] Assuming drive cache: write through
Mar 19 18:39:22 ArchDaemon kernel: sd 4:0:0:0: [sdb] Assuming drive cache: write through
Mar 19 18:39:30 ArchDaemon kernel: sd 4:0:0:0: [sdb] Assuming drive cache: write through
errors common in auth.log
Mar 19 13:10:25 ArchDaemon sudo: desktopuser : pam_authenticate: Conversation error ; TTY=unknown ; PWD=/home/desktopuser ; USER=root ; COMMAND=/usr/lib/xfce4/xfsm-shutdown-helper
Mar 19 13:10:30 ArchDaemon dbus-daemon: Rejected send message, 1 matched rules; type="method_call", sender=":1.10" (uid=1001 pid=1567 comm="exo-mount) interface="org.freedesktop.Hal.Device.Volume" member="Mount" error name="(unset)" requested_reply=0 destination="org.freedesktop.Hal" (uid=0 pid=1336 comm="/usr/sbin/hald))I recently did a fresh install of Arch onto an older PC that I have. It's running a P4 3.06GHz, an nVidia GeForce FX 5900, and 1GB RAM. Because of the lower resources, I decided to use xfce4 and slim. I have a monitor and TV hooked up through s-video with the "seperate X screen" option. Whenever I logout of xfce (this includes, logout, reboot, shutdown), it goes to a blank black screen with a cursor at the top left and just hangs. I have slim configured to run from inittab, so it picks up after a couple seconds. However, if I run startx from console, and then logout of xfce the system just hangs and wont accept any keyboard input (including ctrl+alt+function to switch run levels). Also, if I choose to shutdown or reboot, the system will do so but the only thing I see is the blank screen until the POST. If I do a startx from console, the logout, I'm able to ssh in from my laptop, login and issue a reboot (again the screen doesn't change until the POST). Also, if I turn the "seperate x screen" option off, and just run the desktop on the monitor, it doesn't freeze. I've worked my way through a number of issues so far, but this one has me completely stumped. I'm not sure if there's something wrong with my configuration or if it's just a problem with the graphics driver. Any advice and/or help is greatly appreciated.
Here are configuration and log files:
Xorg.conf
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder75) Wed Jan 27 03:03:53 PST 2010
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
Option "BlankTime" "0"
Option "StandbyTime" "0"
Option "SuspendTime" "0"
Option "OffTime" "0"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "glx"
Load "dri2"
Load "dri"
Load "dbe"
Load "record"
Load "extmod"
EndSection
Section "ServerFlags"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
Option "DPI" "95 x 96"
ModelName "CMO CMC 17 AD"
HorizSync 30.0 - 82.0
VertRefresh 50.0 - 75.0
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Unknown"
ModelName "TV-0"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "NV35 [GeForce FX 5900]"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce FX 5900"
BusID "PCI:1:0:0"
Screen 0
EndSection
Section "Device"
Identifier "Videocard1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce FX 5900"
BusID "PCI:1:0:0"
Screen 1
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "TwinViewXineramaInfoOrder" "CRT-0"
Option "metamodes" "CRT: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Videocard1"
Monitor "Monitor1"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "TV: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
slim.conf
# Path, X server and arguments (if needed)
# Note: -xauth $authfile is automatically appended
default_path ./:/bin:/usr/bin:/usr/local/bin
default_xserver /usr/bin/X
xserver_arguments -nolisten tcp vt07
# Commands for halt, login, etc.
halt_cmd /sbin/shutdown -h now
reboot_cmd /sbin/shutdown -r now
console_cmd /usr/bin/xterm -C -fg white -bg black +sb -T "Console login" -e /bin/sh -c "/bin/cat /etc/issue; exec /bin/login"
#suspend_cmd /usr/sbin/suspend
# Full path to the xauth binary
xauth_path /usr/bin/xauth
# Xauth file for server
authfile /var/run/slim.auth
# Activate numlock when slim starts. Valid values: on|off
# numlock on
# Hide the mouse cursor (note: does not work with some WMs).
# Valid values: true|false
# hidecursor false
# This command is executed after a succesful login.
# you can place the %session and %theme variables
# to handle launching of specific commands in .xinitrc
# depending of chosen session and slim theme
# NOTE: if your system does not have bash you need
# to adjust the command according to your preferred shell,
# i.e. for freebsd use:
# login_cmd exec /bin/sh - ~/.xinitrc %session
login_cmd exec /bin/bash -login ~/.xinitrc %session
# Commands executed when starting and exiting a session.
# They can be used for registering a X11 session with
# sessreg. You can use the %user variable
sessionstart_cmd /usr/bin/sessreg -a -l $DISPLAY %user
sessionstop_cmd /usr/bin/sessreg -d -l $DISPLAY %user
# Start in daemon mode. Valid values: yes | no
# Note that this can be overriden by the command line
# options "-d" and "-nodaemon"
# daemon yes
# Available sessions (first one is the default).
# The current chosen session name is replaced in the login_cmd
# above, so your login command can handle different sessions.
# see the xinitrc.sample file shipped with slim sources
sessions xfce4,icewm,wmaker,blackbox
# Executed when pressing F11 (requires imagemagick)
screenshot_cmd import -window root /slim.png
# welcome message. Available variables: %host, %domain
welcome_msg Welcome to %host
# Session message. Prepended to the session name when pressing F1
# session_msg Session:
# shutdown / reboot messages
shutdown_msg The system is halting...
reboot_msg The system is rebooting...
# default user, leave blank or remove this line
# for avoid pre-loading the username.
default_user desktopuser
# Focus the password field on start when default_user is set
# Set to "yes" to enable this feature
focus_password yes
# Automatically login the default user (without entering
# the password. Set to "yes" to enable this feature
auto_login yes
# current theme, use comma separated list to specify a set to
# randomly choose from
current_theme default
# Lock file
lockfile /var/lock/slim.lock
# Log file
logfile /var/log/slim.log
slim.log isolated reboot
/usr/bin/xauth: creating new authority file /var/run/slim.auth
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.7.5.902 (1.7.6 RC 2)
Release Date: 2010-03-12
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.33-ARCH i686
Current Operating System: Linux ArchDaemon 2.6.32-ARCH #1 SMP PREEMPT Mon Mar 15 20:08:25 UTC 2010 i686
Kernel command line: root=/dev/disk/by-uuid/49d062ba-9f7b-4d18-98f2-87249f723889 ro 5 acpi_enforce_resources=lax vga=771
Build Date: 13 March 2010 07:33:22PM
Current version of pixman: 0.16.6
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 19 14:07:00 2010
(==) Using config file: "/etc/X11/xorg.conf"
/usr/bin/xauth: creating new authority file /home/desktopuser/.Xauthority
/usr/bin/startxfce4: X server already running on display :0.0
/tmp/xrdb_dysqQd:1: error: Unknown #directive "Those"
# Those are fallback settings, use the ui plugin to change it
/tmp/xrdb_dysqQd:2: error: Unknown #directive "or"
# or add your overrides to ~/.Xresources
/tmp/xrdb_dysqQd:3: error: Unknown #directive "Xft"
# Xft.hintstyle: hintnone/hintslight/hintmedium/hintfull
/tmp/xrdb_dysqQd:4: error: Unknown #directive "Xft"
# Xft hinting: 1/0
4 errors in preprocessor.
xrdb: "Xft.hinting" on line 9 overrides entry on line 6
xrdb: "Xft.hintstyle" on line 11 overrides entry on line 7
/tmp/xrdb_dysqQd:1: error: Unknown #directive "Those"
# Those are fallback settings, use the ui plugin to change it
/tmp/xrdb_dysqQd:2: error: Unknown #directive "or"
# or add your overrides to ~/.Xresources
/tmp/xrdb_dysqQd:3: error: Unknown #directive "Xft"
# Xft.hintstyle: hintnone/hintslight/hintmedium/hintfull
/tmp/xrdb_dysqQd:4: error: Unknown #directive "Xft"
# Xft hinting: 1/0
4 errors in preprocessor.
xrdb: "Xft.hinting" on line 9 overrides entry on line 6
xrdb: "Xft.hintstyle" on line 11 overrides entry on line 7
Agent pid 1617
xfdesktop[1637]: starting up
(xfce4-settings-helper:1639): GLib-GObject-CRITICAL **: g_param_spec_flags: assertion `G_TYPE_IS_FLAGS (flags_type)' failed
(xfce4-settings-helper:1639): GLib-GObject-CRITICAL **: g_object_class_install_property: assertion `G_IS_PARAM_SPEC (pspec)' failed
slim.log isolated logout
slim: waiting for X server to shut down..........
slim: X server slow to shut down, sending KILL signal.
slim: waiting for server to die
/usr/bin/xauth: creating new authority file /var/run/slim.auth
slim: waiting for X server to begin accepting connections
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.7.5.902 (1.7.6 RC 2)
Release Date: 2010-03-12
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.33-ARCH i686
Current Operating System: Linux ArchDaemon 2.6.32-ARCH #1 SMP PREEMPT Mon Mar 15 20:08:25 UTC 2010 i686
Kernel command line: root=/dev/disk/by-uuid/49d062ba-9f7b-4d18-98f2-87249f723889 ro 5 acpi_enforce_resources=lax vga=771
Build Date: 13 March 2010 07:33:22PM
Current version of pixman: 0.16.6
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 19 14:01:03 2010
(==) Using config file: "/etc/X11/xorg.conf"
Xorg.0.log
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.7.5.902 (1.7.6 RC 2)
Release Date: 2010-03-12
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.33-ARCH i686
Current Operating System: Linux ArchDaemon 2.6.32-ARCH #1 SMP PREEMPT Mon Mar 15 20:08:25 UTC 2010 i686
Kernel command line: root=/dev/disk/by-uuid/49d062ba-9f7b-4d18-98f2-87249f723889 ro 5 acpi_enforce_resources=lax vga=771
Build Date: 13 March 2010 07:33:22PM
Current version of pixman: 0.16.6
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 19 18:39:41 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Videocard0"
(**) |-->Screen "Screen1" (1)
(**) | |-->Monitor "Monitor1"
(**) | |-->Device "Videocard1"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "BlankTime" "0"
(**) Option "StandbyTime" "0"
(**) Option "SuspendTime" "0"
(**) Option "OffTime" "0"
(**) Option "Xinerama" "0"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x81e4c40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7
(--) PCI:*(0:1:0:0) 10de:0331:0000:0000 nVidia Corporation NV35 [GeForce FX 5900] rev 161, Mem @ 0xfd000000/16777216, 0xe0000000/134217728, BIOS @ 0x????????/131072
(--) PCI: (0:2:10:0) 4444:0016:0070:b7f3 Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder rev 1, Mem @ 0xf0000000/67108864
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 173.14.25 Wed Jan 27 02:59:37 PST 2010
(II) Loading extension GLX
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.5.902, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.5.902, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.5.902, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.5.902, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.5.902, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver 173.14.25 Wed Jan 27 02:34:38 PST 2010
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.5.902, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules/libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.7.5.902, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "TwinView" "0"
(**) NVIDIA(0): Option "MetaModes" "CRT: nvidia-auto-select +0+0"
(**) NVIDIA(0): Option "TwinViewXineramaInfoOrder" "CRT-0"
(**) NVIDIA(0): Option "DPI" "95 x 96"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce FX 5900 (NV35) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 131072 kBytes
(--) NVIDIA(0): VideoBIOS: 04.35.20.18.04
(II) NVIDIA(0): Detected AGP rate: 8X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce FX 5900 at PCI:1:0:0:
(--) NVIDIA(0): CMO CMC 17" AD (CRT-0)
(--) NVIDIA(0): NVIDIA TV Encoder (TV-0)
(--) NVIDIA(0): CMO CMC 17" AD (CRT-0): 400.0 MHz maximum pixel clock
(--) NVIDIA(0): NVIDIA TV Encoder (TV-0): 400.0 MHz maximum pixel clock
(--) NVIDIA(0): TV encoder: NVIDIA
(II) NVIDIA(0): Display Device found referenced in MetaMode: CRT-0
(II) NVIDIA(0): Assigned Display Device: CRT-0
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "CRT:nvidia-auto-select+0+0"
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
(**) NVIDIA(0): DPI set to (95, 96); computed from "DPI" X config option
(==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(**) NVIDIA(1): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(1): RGB weight 888
(==) NVIDIA(1): Default visual is TrueColor
(==) NVIDIA(1): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(1): Option "TwinView" "0"
(**) NVIDIA(1): Option "MetaModes" "TV: nvidia-auto-select +0+0"
(**) NVIDIA(1): Enabling RENDER acceleration
(II) NVIDIA(1): NVIDIA GPU GeForce FX 5900 (NV35) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(1): Memory: 131072 kBytes
(--) NVIDIA(1): VideoBIOS: 04.35.20.18.04
(II) NVIDIA(1): Detected AGP rate: 8X
(--) NVIDIA(1): Interlaced video modes are supported on this GPU
(--) NVIDIA(1): Connected display device(s) on GeForce FX 5900 at PCI:1:0:0:
(--) NVIDIA(1): CMO CMC 17" AD (CRT-0)
(--) NVIDIA(1): NVIDIA TV Encoder (TV-0)
(--) NVIDIA(1): CMO CMC 17" AD (CRT-0): 400.0 MHz maximum pixel clock
(--) NVIDIA(1): NVIDIA TV Encoder (TV-0): 400.0 MHz maximum pixel clock
(--) NVIDIA(1): TV encoder: NVIDIA
(II) NVIDIA(1): Display Device found referenced in MetaMode: TV-0
(II) NVIDIA(1): Assigned Display Device: TV-0
(II) NVIDIA(1): Validated modes:
(II) NVIDIA(1): "TV:nvidia-auto-select+0+0"
(II) NVIDIA(1): Virtual screen size determined to be 1024 x 768
(==) NVIDIA(1): DPI set to (75, 75); computed from built-in default
(==) NVIDIA(1): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) NVIDIA(0): Initialized AGP GART.
(II) NVIDIA(0): Unable to connect to the ACPI daemon; the ACPI daemon may not
(II) NVIDIA(0): be running or the "AcpidSocketPath" X configuration option
(II) NVIDIA(0): may not be set correctly. When the ACPI daemon is
(II) NVIDIA(0): available, the NVIDIA X driver can use it to receive ACPI
(II) NVIDIA(0): events. For details, please see the "ConnectToAcpid" and
(II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
(II) NVIDIA(0): Config Options in the README.
(II) NVIDIA(0): Setting mode "CRT:nvidia-auto-select+0+0"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(==) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(==) RandR enabled
(II) NVIDIA(1): Initialized AGP GART.
(II) NVIDIA(1): Unable to connect to the ACPI daemon; the ACPI daemon may not
(II) NVIDIA(1): be running or the "AcpidSocketPath" X configuration option
(II) NVIDIA(1): may not be set correctly. When the ACPI daemon is
(II) NVIDIA(1): available, the NVIDIA X driver can use it to receive ACPI
(II) NVIDIA(1): events. For details, please see the "ConnectToAcpid" and
(II) NVIDIA(1): "AcpidSocketPath" X configuration options in Appendix B: X
(II) NVIDIA(1): Config Options in the README.
(II) NVIDIA(1): Setting mode "TV:nvidia-auto-select+0+0"
(II) NVIDIA(1): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(1): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(1): Backing store disabled
(==) NVIDIA(1): Silken mouse enabled
(==) NVIDIA(1): DPMS enabled
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Microsoft Microsoft Wireless Optical Desktop® 1.00
(**) Microsoft Microsoft Wireless Optical Desktop® 1.00: always reports core events
(**) Microsoft Microsoft Wireless Optical Desktop® 1.00: Device: "/dev/input/event6"
(II) Microsoft Microsoft Wireless Optical Desktop® 1.00: Found 9 mouse buttons
(II) Microsoft Microsoft Wireless Optical Desktop® 1.00: Found scroll wheel(s)
(II) Microsoft Microsoft Wireless Optical Desktop® 1.00: Found relative axes
(II) Microsoft Microsoft Wireless Optical Desktop® 1.00: Found x and y relative axes
(II) Microsoft Microsoft Wireless Optical Desktop® 1.00: Found keys
(II) Microsoft Microsoft Wireless Optical Desktop® 1.00: Configuring as mouse
(II) Microsoft Microsoft Wireless Optical Desktop® 1.00: Configuring as keyboard
(**) Microsoft Microsoft Wireless Optical Desktop® 1.00: YAxisMapping: buttons 4 and 5
(**) Microsoft Microsoft Wireless Optical Desktop® 1.00: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Microsoft Microsoft Wireless Optical Desktop® 1.00" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Microsoft Microsoft Wireless Optical Desktop® 1.00: (accel) keeping acceleration scheme 1
(**) Microsoft Microsoft Wireless Optical Desktop® 1.00: (accel) acceleration profile 0
(II) Microsoft Microsoft Wireless Optical Desktop® 1.00: initialized for relative axes.
(II) config/hal: Adding input device Microsoft Microsoft Wireless Optical Desktop® 1.00
(**) Microsoft Microsoft Wireless Optical Desktop® 1.00: always reports core events
(**) Microsoft Microsoft Wireless Optical Desktop® 1.00: Device: "/dev/input/event5"
(II) Microsoft Microsoft Wireless Optical Desktop® 1.00: Found keys
(II) Microsoft Microsoft Wireless Optical Desktop® 1.00: Configuring as keyboard
(II) XINPUT: Adding extended input device "Microsoft Microsoft Wireless Optical Desktop® 1.00" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event2"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
errors from errors.log, this stuff just repeats
Mar 19 15:44:43 ArchDaemon kernel: ACPI: I/O resource smsc47m1 [0x680-0x6ff] conflicts with ACPI region IOPM [0x680-0x6ff]
Mar 19 18:39:21 ArchDaemon kernel: ivtv0: Unable to open firmware v4l-cx2341x-enc.fw (must be 376836 bytes)
Mar 19 18:39:21 ArchDaemon kernel: ivtv0: Did you put the firmware in the hotplug firmware directory?
Mar 19 18:39:21 ArchDaemon kernel: ivtv0: Unable to open firmware v4l-cx2341x-enc.fw (must be 376836 bytes)
Mar 19 18:39:21 ArchDaemon kernel: ivtv0: Did you put the firmware in the hotplug firmware directory?
Mar 19 18:39:21 ArchDaemon kernel: ivtv0: Failed to initialize on minor 3
Mar 19 18:39:21 ArchDaemon kernel: ivtv0: Failed to initialize on minor 0
Mar 19 18:39:21 ArchDaemon kernel: ivtv0: Failed to initialize on minor 1
Mar 19 18:39:21 ArchDaemon kernel: ivtv0: Failed to initialize on minor 2
Mar 19 18:39:22 ArchDaemon kernel: ivtv0: Failed to initialize on minor 2
Mar 19 18:39:22 ArchDaemon kernel: ivtv0: Failed to initialize on minor 0
Mar 19 18:39:22 ArchDaemon kernel: ivtv0: Failed to initialize on minor 3
Mar 19 18:39:22 ArchDaemon kernel: ivtv0: Failed to initialize on minor 1
Mar 19 18:39:22 ArchDaemon kernel: sd 4:0:0:0: [sdb] Assuming drive cache: write through
Mar 19 18:39:22 ArchDaemon kernel: sd 4:0:0:0: [sdb] Assuming drive cache: write through
Mar 19 18:39:30 ArchDaemon kernel: sd 4:0:0:0: [sdb] Assuming drive cache: write through
errors common in auth.log
Mar 19 13:10:25 ArchDaemon sudo: desktopuser : pam_authenticate: Conversation error ; TTY=unknown ; PWD=/home/desktopuser ; USER=root ; COMMAND=/usr/lib/xfce4/xfsm-shutdown-helper
Mar 19 13:10:30 ArchDaemon dbus-daemon: Rejected send message, 1 matched rules; type="method_call", sender=":1.10" (uid=1001 pid=1567 comm="exo-mount) interface="org.freedesktop.Hal.Device.Volume" member="Mount" error name="(unset)" requested_reply=0 destination="org.freedesktop.Hal" (uid=0 pid=1336 comm="/usr/sbin/hald)) -
Hi All,
We are trying to access the Create Deployment method stated below
http://msdn.microsoft.com/en-us/library/windowsazure/ee460813
We have uploaded the Package in the blob and browsing the configuration file. We have checked trying to upload manually the package and config file in Azure portal and its working
fine.
Below is the code we have written for creating deployment where "AzureEcoystemCloudService" is our cloud service name where we want to deploy our package. I have also highlighted the XML creation
part.
byte[] bytes =
new byte[fupldConfig.PostedFile.ContentLength + 1];
fupldConfig.PostedFile.InputStream.Read(bytes, 0, bytes.Length);
string a = Encoding.UTF8.GetString(bytes, 0, bytes.Length);
string base64ConfigurationFile = a.ToBase64();
X509Certificate2 certificate =
CertificateUtility.GetStoreCertificate(ConfigurationManager.AppSettings["thumbprint"].ToString());
HostedService.CreateNewDeployment(certificate,
ConfigurationManager.AppSettings["SubscriptionId"].ToString(),
"2012-03-01", "AzureEcoystemCloudService", Infosys.AzureEcosystem.Entities.Enums.DeploymentSlot.staging,
"AzureEcoystemDeployment",
"http://shubhendustorage.blob.core.windows.net/shubhendustorage/Infosys.AzureEcoystem.Web.cspkg",
"AzureEcoystemDeployment", base64ConfigurationFile,
true, false);
<summary>
/// </summary>
/// <param name="certificate"></param>
/// <param name="subscriptionId"></param>
/// <param name="version"></param>
/// <param name="serviceName"></param>
/// <param name="deploymentSlot"></param>
/// <param name="name"></param>
/// <param name="packageUrl"></param>
/// <param name="label"></param>
/// <param name="base64Configuration"></param>
/// <param name="startDeployment"></param>
/// <param name="treatWarningsAsError"></param>
public static
void CreateNewDeployment(X509Certificate2 certificate,
string subscriptionId,
string version, string serviceName, Infosys.AzureEcosystem.Entities.Enums.DeploymentSlot deploymentSlot,
string name, string packageUrl,
string label, string base64Configuration,
bool startDeployment, bool treatWarningsAsError)
Uri uri = new
Uri(String.Format(Constants.CreateDeploymentUrlTemplate, subscriptionId, serviceName, deploymentSlot.ToString()));
XNamespace wa = Constants.xmlNamespace;
XDocument requestBody =
new XDocument();
String base64ConfigurationFile = base64Configuration;
String base64Label = label.ToBase64();
XElement xName = new
XElement(wa + "Name", name);
XElement xPackageUrl =
new XElement(wa +
"PackageUrl", packageUrl);
XElement xLabel = new
XElement(wa + "Label", base64Label);
XElement xConfiguration =
new XElement(wa +
"Configuration", base64ConfigurationFile);
XElement xStartDeployment =
new XElement(wa +
"StartDeployment", startDeployment.ToString().ToLower());
XElement xTreatWarningsAsError =
new XElement(wa +
"TreatWarningsAsError", treatWarningsAsError.ToString().ToLower());
XElement createDeployment =
new XElement(wa +
"CreateDeployment");
createDeployment.Add(xName);
createDeployment.Add(xPackageUrl);
createDeployment.Add(xLabel);
createDeployment.Add(xConfiguration);
createDeployment.Add(xStartDeployment);
createDeployment.Add(xTreatWarningsAsError);
requestBody.Add(createDeployment);
requestBody.Declaration =
new XDeclaration("1.0",
"UTF-8", "no");
XDocument responseBody;
RestApiUtility.InvokeRequest(
uri, Infosys.AzureEcosystem.Entities.Enums.RequestMethod.POST.ToString(),
HttpStatusCode.Accepted, requestBody, certificate, version,
out responseBody);
<summary>
/// A helper function to invoke a Service Management REST API operation.
/// Throws an ApplicationException on unexpected status code results.
/// </summary>
/// <param name="uri">The URI of the operation to invoke using a web request.</param>
/// <param name="method">The method of the web request, GET, PUT, POST, or DELETE.</param>
/// <param name="expectedCode">The expected status code.</param>
/// <param name="requestBody">The XML body to send with the web request. Use null to send no request body.</param>
/// <param name="responseBody">The XML body returned by the request, if any.</param>
/// <returns>The requestId returned by the operation.</returns>
public static
string InvokeRequest(
Uri uri,
string method,
HttpStatusCode expectedCode,
XDocument requestBody,
X509Certificate2 certificate,
string version,
out XDocument responseBody)
responseBody =
null;
string requestId = String.Empty;
HttpWebRequest request = (HttpWebRequest)HttpWebRequest.Create(uri);
request.Method = method;
request.Headers.Add("x-ms-Version", version);
request.ClientCertificates.Add(certificate);
request.ContentType =
"application/xml";
if (requestBody != null)
using (Stream requestStream = request.GetRequestStream())
using (StreamWriter streamWriter =
new StreamWriter(
requestStream, System.Text.UTF8Encoding.UTF8))
requestBody.Save(streamWriter,
SaveOptions.DisableFormatting);
HttpWebResponse response;
HttpStatusCode statusCode =
HttpStatusCode.Unused;
try
response = (HttpWebResponse)request.GetResponse();
catch (WebException ex)
// GetResponse throws a WebException for 4XX and 5XX status codes
response = (HttpWebResponse)ex.Response;
try
statusCode = response.StatusCode;
if (response.ContentLength > 0)
using (XmlReader reader =
XmlReader.Create(response.GetResponseStream()))
responseBody =
XDocument.Load(reader);
if (response.Headers !=
null)
requestId = response.Headers["x-ms-request-id"];
finally
response.Close();
if (!statusCode.Equals(expectedCode))
throw new
ApplicationException(string.Format(
"Call to {0} returned an error:{1}Status Code: {2} ({3}):{1}{4}",
uri.ToString(),
Environment.NewLine,
(int)statusCode,
statusCode,
responseBody.ToString(SaveOptions.OmitDuplicateNamespaces)));
return requestId;
But every time we are getting the below error from the line
response = (HttpWebResponse)request.GetResponse();
<Error xmlns="http://schemas.microsoft.com/windowsazure" xmlns:i="http://www.w3.org/2001/XMLSchema-instance">
<Code>BadRequest</Code>
<Message>The specified configuration settings for Settings are invalid. Verify that the service configuration file is a valid XML file, and that role instance counts are specified as positive integers.</Message>
</Error>
Any help is appreciated.
Thanks,
ShubhenduPlease find the request XML I have found it in debug mode
<CreateDeployment xmlns="http://schemas.microsoft.com/windowsazure">
<Name>742d0a5e-2a5d-4bd0-b4ac-dc9fa0d69610</Name>
<PackageUrl>http://shubhendustorage.blob.core.windows.net/shubhendustorage/WindowsAzure1.cspkg</PackageUrl>
<Label>QXp1cmVFY295c3RlbURlcGxveW1lbnQ=</Label>
<Configuration>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</Configuration>
<StartDeployment>true</StartDeployment>
<TreatWarningsAsError>false</TreatWarningsAsError>
</CreateDeployment>
Shubhendu G -
Can you use VGA and DisplayPort at the same time.
I have a T500 with the ATI graphics. I currently have it set up with only a VGA monitor. I am wanting to also get the DisplayPort to VGA adapter. Will I still be able to use both external monitors and my laptop monitor? If anyone has done this let me know. I have read that you can use VGA and DVI but neither of my monitors have DVI.
Exceptions are used when there are some mistakes , or exceeds the supposed values, we can highligt that in different colours for enabling the validator to notice easily. In this we are giving conditions for considering the value as exceptions. suppose, if the values is out of the range -1 to +1 then exception.
But conditions can be considered as the restrictions given in measure level also. So please elaborate what you meant by conditions -
Saving image in windows 8.1 using stream and bitmap encoder id
Hi
var renderTargetBitmap = new RenderTargetBitmap();
await renderTargetBitmap.Render(myElementTree);
var pixels = await renderTargetBitmap.GetPixelsAsync();
var picker = new FileSavePicker();
// Picker setup
var file = await picker.PickSaveFileAsync();
// File validation
using (var stream = await file.OpenAsync(FileAccessMode.ReadWrite))
var encoder = await
BitmapEncoder.CreateAsync(BitmapEncoder.BmpEncoderId, stream);
encoder.SetPixelData(BitmapPixelFormat.Rgba8, 100, 0, 96, 96,
await renderTargetBitmap.GetPixelsAsync());
await encoder.FlushAsync();
I have already used the code snippet. Could you please tell me how to save UIElement tree by having the stream and bitmap encoder id as input?
Thanks
SatheeshHere you go. Set up the file picker and call our CaptureElementToFile function. In this case it's passing the page to capture the whole screen:
FileSavePicker picker = new FileSavePicker();
picker.SuggestedStartLocation = PickerLocationId.PicturesLibrary;
picker.SuggestedFileName = "capture.bmp";
picker.FileTypeChoices.Add("Bitmap File",new List<string>() { ".bmp" });
StorageFile file = await picker.PickSaveFileAsync();
CaptureElementToFile(this, file);
And here's CaptureElementToFile. The BitmapEncoder needs to know information about the size and shape of the pixel buffer and it needs to have the pixels as an Array. If you want to encode to a different size you can include a BitmapTransform.
async void CaptureElementToFile(UIElement element, StorageFile file)
RenderTargetBitmap renderTargetBitmap = new RenderTargetBitmap();
await renderTargetBitmap.RenderAsync(element);
IBuffer pixelBuffer = await renderTargetBitmap.GetPixelsAsync();
DisplayInformation dispInfo = DisplayInformation.GetForCurrentView();
using (var stream = await file.OpenAsync(FileAccessMode.ReadWrite))
var encoder = await BitmapEncoder.CreateAsync(BitmapEncoder.BmpEncoderId, stream);
encoder.SetPixelData(BitmapPixelFormat.Rgba8, BitmapAlphaMode.Straight,
(uint)renderTargetBitmap.PixelWidth,
(uint)renderTargetBitmap.PixelHeight,
dispInfo.LogicalDpi,dispInfo.LogicalDpi,
pixelBuffer.ToArray());
await encoder.FlushAsync();
--Rob -
How do I clear a form text field during validation using JavaScript?
I am just learning JavaScript and the Acrobat API. I have a form created in adobe acrobat 9 standard (starting from an existing form in MS Excel). There is a text field for a Social Security Number. I have a custom format script and keystroke script and a custom validation script. I would like to add to the existing validation script, that if what is entered doesn't match the validation test, then clear out the field as in erase all the characters that were typed into the field. I want this to happen no matter what. So even if someone filled in a valid SSN number and then moved to the next field, but then went back to the SSN field and decided to change their entry and this new entry was "invalid" then clear out the field (do not revert to what was typed in the field originally, even though it was considered valid by the script). (There is currently no default value for this field.) Thank you inadvance for you help on this.
Here is the current validation script:
// only run when field not blank
if (event.value != "")
// RegExp for validation #########
var re = /^(\d{3})(\d{2})(\d{4})$/
if(re.test(event.value) == false)
app.alert("Enter a 9-digit Social Security number with no spaces or special characters (e.g., 555555555). It will be converted to the format 555-55-5555.")
//Here is where I've tried adding all of these lines, but none of them will clear out what is in the field
//this.resetForm([event.target.name]);
//event.target.value == "";
//getField("SSN 1").value = getField("SSN 1").defaultValue;
//getField("SSN 1").value == "";
//event.rc = false;
And incase these are somehow affecting it, here are the other scripts being processed on this field:
Keystroke script:
var input=event.value;
var chars=input.length;
if( event.willCommit || chars==8 )this.getField("Name 1").setFocus();
Format script:
var re = /^(\d{3})(\d{2})(\d{4})$/
if(re.test(event.value) == true)
// add "-"
event.value = RegExp.$1 + "-" + RegExp.$2 + "-" + RegExp.$3;Thank you very much. I did try that before, but I was using event.value == ""; I guess in this case I'm assigning the value of "", not making the value equal "".
-
Struts2 - Dynamic values in expression while doing validations using annota
Hi,
I am using Struts2. I am doing validations using annotations in action class.
I have many forms having same type of fields say zip code.
I am adding validations like below in each action class having zip code field
@Action(value = "/saveData")
@Validations(
regexFields = {
@RegexFieldValidator(fieldName = "databean.zipCode", expression = "^([1-9]{1}[0-9]{4}(-[0-9]{4})?)$", key = "errors.zipcode.format", message = "errors.zipcode.format")
public String saveData() throws Exception {
Now, in case if I need to change the expression for zip code validations, then I need to modify the same in each action class.
I would like to know if there is any way to use java variable or property for expression so that i only need to change at one place (value of variable) and all actions get modified.
I want something like below
private static final String ZIP_CODE_FORMAT_EXPRESSION = "^([1-9]{1}[0-9]{4}(-[0-9]{4})?)$"
@Action(value = "/saveData")
@Validations(
regexFields = {
@RegexFieldValidator(fieldName = "databean.zipCode", expression = "${ZIP_CODE_FORMAT_EXPRESSION}", key = "errors.zipcode.format", message = "errors.zipcode.format")
public String saveData() throws Exception {
Thanks
Krishan BabbarThanks
That is working..
I defined my expression as constant in my another file and it is working fine....
One more question i need to check space in expression but its not working... I tried following:
expression = "^([a-zA-Z0-9@_.-\\s]+)$" and expression = "^([a-zA-Z0-9@_.-\\\\s]+)$"
Maybe you are looking for
-
sorry may be a dup... how do I view holidays in iCal 5.0.3???
-
Calendar template in obiee 11g
Hi All, Is there any calendar template/add on in obiee 11g? So in calendar we can set the schedule for sales, etc. If there is any, how to use it? Thank you before Regards JOE Edited by: JoeSSI on Jul 26, 2012 7:54 PM
-
I have a hitachi hard drive from an old pc. I would like to transfer pics and music to my new macbook air. What cord do I need to make this possible?
-
Transaction IW32 for touch screen
Good evening, I need release transaction IW32 for touch-screen(display for work by touch hand). I need something as http://img221.imageshack.us/img221/5707/r3touchmn9.jpg (i have done this in Graph Editor). Create all features of IW32 in Web Dynpro f
-
Airport express not working with smart bro
My apple express is not working with smart bro. What to do????