Validation while assignment of Check through FCH5 or F110

Hi  SAP Gurus,
Greeetings of the day.
Could you please advice me on the requirement which is as follows:
When assigning check to the Payment  document, I require a validation.Check issue is done through FCH5 or F110. Check shouldnot be assigned to the Payment Document that has only GL line items in it (not even one vendor or customer item)
Ex:  Expense a/c dr
             To bank a/c
So the validation should check that the payment documet should contain atleast one vendor or customer line item. & this should be exempted for one Doc Type= "ZC"  through which salaries are posted and the entry will be as follows
Salaries a/c Dr
   To Bank a/c
Please suggeste me if we can make it through a validation or substitution or an user exit or an field exit.
Appreciate you quick & clear response.No need to say that Iam open to points for the solution which can serve the purpose.
To
Near & Dear
From SAINT

Hi  SAP Gurus,
Greeetings of the day.
Could you please advice me on the requirement which is as follows:
When assigning check to the Payment  document, I require a validation.Check issue is done through FCH5. Check shouldnot be assigned to the Payment Document that has only GL line items in it (not even one vendor or customer item)
Ex:  Expense a/c dr
             To bank a/c
So the validation should check that the payment documet should contain atleast one vendor or customer line item. & this should be exempted for one Doc Type= "ZC"  through which salaries are posted and the entry will be as follows
Salaries a/c Dr
   To Bank a/c
Please suggeste me if we can make it through a validation or substitution or an user exit or an field exit.
Appreciate you quick & clear response.No need to say that Iam open to points for the solution which can serve the purpose.
To
Near & Dear
From SAINT

Similar Messages

  • Error while assigning the Position through Hiring

    Dear all,
    I am getting error "Time constraint" while assigning a newly created Position.
    it says "Position cannot be assigned to two employees".
    However when I checked through PO13 no person is assigned to that position.
    so please suggest.
    Regards,
    Krishna.

    Hi Krishna,
    Please check first only one org unit is assigned to positon. Check in PP01 if the position has any A008 relationship.
    The time constraint set up for relationships between persons and positions (subtype A008) only allows you to assign one position to on person at a time. 
    Set the time constraint for relationships between person and position (subtype A008) to 3.
    Check the time constraints of the object type through table T77ZR.
    Regards,
    Supriya

  • Validation while Article Creation Request through Solution Manager

    We are about to implement Solution Manager. We want to automate the process of registering some of the MDM requests through SolMan.
    We want to upload the standard formats which user needs to fill and also want to keep the validation for the minimum requirement in those templates.
    Any help will be appreciated.

    Thanks Ragu;
    This is what I am looking for.
    When a change request is created, we use the e-mail function in Solution Manager. For the Recipient we a valid "email address" . The recipient type is "Via internet.
    Using this sends the e-mail via excjhange server.
    What I am looking for is an "audit trail" of some sort (in Solution Manager) of what e-mails were sent. These do not show up in the "sent" items of outlook.
    Hope this make some sense.
    Regards
    Don Newton

  • Insert,update, del not working while assigned to users through role

    Dears,
    I created a role ABC
    Assigned select insert update and delete privileges to role ABC on a table MY_SEC_TABLE
    Later I assigned this role to a user TEST
    Connected to database with this user TEST
    and
    Try to edit any row in table MY_SEC_TABLE but receive ORA-01031: insufficient privileges
    Edited by: FarhatKayani on Mar 17, 2013 11:03 PM

    Hi,
    OK,
    Try to edit any row in table MY_SEC_TABLE but receive ORA-01031: insufficient privilegesCould you select MY_SEC_TABLE by this user??
    Regards,

  • Root column disabled while Assigning XSD- In Syndicator

    Hi,
    I am not able to assign the XSD against the Remote system in the Syndicator.
    While assigning the XSD through
                  Syndicator==> File==>
                                                    Destination Properties
    While assigning the XSD against the Remotesystem,Root Textbox is disabled and OK button alsio disabled...
    Please provide your suggestions
    Best Regards
    Devaraj PK

    Hi Devraj,
    Root column dissabled when your XSD is not proper.
    In Syndicator go to file->Destination Properties
    Here select XML Schema if you have made an entry of an XSD in XML Schema table in Console or you can select XML Schema File if you want to pick your XSD from a particular location.Now if the XSD is proper then only the Root Column will be enabled which contains the root node available in
    XSD so please check for the Same.
    Reward if Helpful,
    Regards,
    Vinay Yadav

  • I Have iPad4 and using with Aricel Prepaid 3G SIM, How to check my VAlidity period and balance amount through iPad?. pls help me

    I Have iPad4 and using with Aricel Prepaid 3G SIM, How to check my VAlidity period and balance amount through iPad?. pls help me, M.Kumar, Chennai,
    <Email Edited By Host>

    There are 2 concepts attached to a bank balance. The balance as per your books of accounts and another is the balance maintained with the bank. I believe i need not explain these 2 concepts. These 2 balances can be obtained from Oracle system provided some of prerequsities are met with.
    Balance as per your books - This is nothing but the GL balance available. In order to obtain balances for each bank accounts, it is advised that each bank account should have a separate account code combination. This is achieved generally by having a separate natural account for each bank. The code combination is attached to the cahs account for each bank. By maintaining separate account code combination, the balance in each code combination can be obtained from GL (provided transactions are accounted and posted in GL). These balances represent the balance for each bank according to your books of accounts. You can create an FSG for this purpose and provide the same to the customer, so that they can run the same whenevr they want.
    Balance as per bank - This balance is maintained by oracle in 2 ways - either the bank balance can be manually entered for each bank account for each date (quite cumbersome). Else, while loading the bank statement, the bank balances are also loaded. There are various types of bank balances stored - value dated balance, available balance, float balance etc. Depending on the balances provided by bank along with the bank statement, the bank balance can be recorded in oracle system. After the bank statement is uploaded and balances stored, standard cash management reports are available to query for the bank account balances. In order to view daily movement, the bank statement should be loaded on daily basis.
    Hope this helps.
    Vinit

  • Check while MIGO, to check document is attched through SERVICE FOR OBJECT

    Hi,
    While creating a document through MIGO,
    I want to apply a check that during 101 movement type if document is not attached , system should throw a error message
    'Attach document first'.
    Is it possible ?
    If yes , then through which progess BADI or user-exit ?

    Hi
    The authorization objects for attachment to material are as following:
    Object Class BC_Z Basis - Central Functions
    Authorization Object: S_BDS_DS  
    Authorizations for Document Set
    Authorization Field ACTVT :  30
    Authorization Field CLASSNAME:BUS1001
    Authorization Field CLASSTYPE:BO
    other ACTVT
    01     Create or generate
    02     Change
    03     Display
    04     Print, edit messages
    05     Lock
    06     Delete
    24     Archive
    25     Reload
    30     Determine
    70     Administer
    78     Assign
    82     Supplement
    Note: That to be able to attach user should have MM02 authorization..
    Best Regards
    Hope it helps

  • Error while assigning user through users_gen t code

    Dear Experts,
    While assigning user to the org structure,i am getting below error message.Please guide me.
    many thanks

    Hi Ganesh,
    Thank you for the update,i was on leave.I could not update the issue.
    Issue has been resolved,issue is due to the last name is not maintained for the user in SU01 then user trying the assign to org through users_gen t code.
    Then issue raised.
    Thank you.

  • Calling FI Validation Rules in BPM server through call transaction

    I m trying to call FI validation rules through call transaction (for FBV0) in BPM server but in the messages table of call transaction it does not gives us the validation rules error messages while when i run manually the transaction in R/3 system i get the validation error messages. So please tell how i can get these validation error messages when called through BPM server.

    Hi madhvi,
                       You are using jtab within the form.. i dont think you can use it directly inside ur FORM sub1 without declaring it or without passing it. and it will give you the syntax error.
    and please send me the step by step code you have written in editor so that i can check it and can reply you with proper solution'
    Thanks ,
    Prasanna

  • Getting Warning while assigning Dimension in to Model in version 10.0

    Hi,
    Iam getting an warning message "Control definition not valid because new Dimension are added in to Model" & "Control result was reset because new Dimension are added in to Model" while assigning Dimensions to the Model.
    Please help me on this issue. Screenshot attached.
    Regards,
    Sudheer

    Hi,
    Controls might exist on this model.
    To check for the existing Controls.Goto Aministartion-->Rules -->Controls .  After you adding the new dimension you have to revisit the controls which were already existing.
    Thanks,
    Raju

  • I want validation while creating material master with profit center

    Dear Experts,
                           I want validation while creating material master with profit center.
    If 0001 plant having 100100 profit center
       0002 plant having  200200 profit center
    Material A cant be created for 0001 plant for with wrong profit center 200200.
    Kindly help & provide me solution clearly

    Hi,
    Profit centers are assigned to controlling areas. And controlling areas can have many plants under them. So as long as both the plants and profit centers are in the same controlling area users will be able to extend the materials.
    You should put in your validation control in the material master user exit. One of the exits you can use is
    MGA00001  Material Master (Industry): Checks and Enhancements
    Thanks & regards
    Hameed Parvez

  • Problem while assigning multiple staffing to project role.

    Dear All,
    I am facing problem while assigning multiple staffing to project role.
    In the project role, we are doing staffing ( assigning BP). While assigning the BP's getting below errors.
    Resource assignments overlap
    Message no. DPR_BUPA_LINK004
    Diagnosis
    The validity period '10.02.2008'-'01.03.2008' for the assignment of project role Product Manager and ' Rakesh Pradhan' overlaps with the validity period of the assignment ''.
    However, the project role type does not allow several staffings to be edited at the same time in the project role.
    System Response
    The system does not allow this constellation of data when saving.
    Procedure
    Check and correct the start and finish dates of the staffings affected.
    Request you to advise in fiixng the issue.
    Thank you for your cooperation.
    Regards,
    Ranjan

    Hi Biplab,
    For multiple staffings in the same time frame, check the option of 'Edit in Parallel' in the Role Type settings in SPRO.
    Let me know if that helps.
    Regards,
    Vivek Pandey

  • Error while assigning an application to a user

    Hi All,
    I am new to Oracle Database Lite. I have created a new user and i want to assign a Sample application which comes while installing the mobile server. But while assigning the Sample application to a user through the application page, i got "ERROR: VIRTUAL PATH IS NULL" and when i wanted to assign the Sample application to a user through the user page, i got "Error in executing " Save application ":oracle.lite.web.resource.ResourceException: CONS-10050: Rollback failure: java.sql.SQLException: Io exception: Connection reset by peer: socket write error "
    So can any one help me how to resolve this error so that i can assign the application to a user?
    Any help is welcomed.
    Shrikant

    Thanks Scott. I've also been looking for a pattern of consistency that would point to the cause of the problem but have been unable to find one. I was hoping that others may have experienced the same error and could help to shed some light here.
    I dug around some and found that the wwv_flows_alias_idx constraint is a unique index on the alias and security_group_id columns of wwv_flows. My application has an alias that is the same for all installations so I thought that somehow a previously used value for security_group_id was being generated causing the unique constraint violation. Can you tell me how that value is generated during the install process? Is it some sort of hashing function?
    Thanks

  • While running a report through workspace getting "Null" error

    While running a report through workspace i am getting "Null" error.i have checekd the db connection and also access to hfm.
    Thanks

    Hi Raj,
    There are a few OSS Notes for your issue.
    If your Query has hierarchy in it then check 734184
    If your query is based on Infoset then check Note 784502 and 701941.
    Also check 668921.
    Bye
    Dinesh

  • XML form in not getting displayed in the option while assigning

    Hello Experts,
    I have created a XML form and now assigning it to a folder. While assigning Folder>new>forms> .. here I can see other forms but not the new one which I have recently created. Please let me know I can assign the newly created form to the folder.
    Regards,
    Abhi

    Hi,
    Please check for the Form Based Publishing for your KM folder
    System Administration-->System Configuration >Knowledge Management->Form Based Pulishing>Forms Availability>Folder Settings check for the Forms to include and Exclude for your folder path. In this you can include or Exclude forms which you form by adding the XML form ID.
    Regards,
    Nivas209.
    Edited by: Nivas209 on Jan 12, 2012 8:12 AM

Maybe you are looking for