Validations and workflows

hi.....can any one tell me wat is meant by validations and workflows  and the difference between them. And plz explain me the functions and there syntax .....

Hi,
Validations are used in MDM data manager for the data compliance i.e to check the structure of data if it is according to the business standards or not.Validations are written in data manager and applied and the result(True /False) are used for further actions.
Ex like a record Emailid is there.A validation is written to check if there is @,.com,.in etc are there or not.If not then email-id is not proper so we will make that email-id value blank by calling a assignments on the basis of the result of validations .
Have a look at the following links.They will help you to understand them better.
Validations:
MDM Validations
New Webinar About Validations with MDM 5.5
Workflow as the word suggest ,is to make the business solution to be in working format by including all the process of data add/update/import/ Validating/De-duplication/merging etc(as per business req.)
Workflow is used to automate the whole process.
Workflow links
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b70eb612-0b01-0010-70b4-a01122d3fd17
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60559952-ff62-2910-49a5-b4fb8e94f167
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60f28084-b90e-2b10-3eb6-d6565367048a
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90990743-91c0-2a10-fd8f-fad371c7ee40
Rgds
Ankit

Similar Messages

  • How to transport the validations, assignments, named searches, and workflow

    Hi Experts
    How to transport the validations, assignments, named searches, and workflow
    between two repositories.
    Thanks
    Vickey.

    Hi Vickey,
    In MDM 5.5 you can use the Archive /Unarchive option for it
    You can refer the below link:
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20751e78-f81f-2a10-228f-eb3a16421b4d(Export/Import Schema)
    Note:Export/Import schema can also be used for Transportation in MDM however as of MDM 5.5 the maps,validations and workflows cannot be transported.
    From MDM 7.1 version onwards you can use the Export/Import Schema as well
    You can refer the below link:
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0dd1ae0-36e5-2b10-f8b4-e6365e643c0b
    Hope It Helped
    Thanks & Regards
    Simona Pinto

  • Lightroom Metadata editing and workflow is tedious nightmare!

    I'm new to Lightroom in just the past month, but have used it enough to see that a serious interface problem makes Lightroom version 1x virtually unusable in a deadline-oriented publishing workflow. Lightroom's Metadata editing and workflow is just a terrible nightmare, and far too tedious and slow. It appears to be an afterthought implemented by good-hearted souls who've never had to edit this sort of information under serious deadline pressures. I know Lightroom is marketed as an image database and not a file browser, but we're all looking to simplify our workflow here and with just a few subtle enhancements, Lightroom could be an excellent file browser and file import manager too.
    As it is now, the Lightroom v1x handling of File Naming and Renaming, Metadata Editing and Keyword Editing is poorly implemented and in need of an immediate overhaul to help professional photographers expedite this crucial and time-consuming first step in the archiving workflow. While Lightroom is very good at many other tasks, I give it a big fat "F" of a failing grade for these tasks.
    First, the Lightroom Library Module needs an even more simple, linear interface that steps users through a precise procedures (and helps them remember them). Arguably, to accomplish this, the Import function may need to become a separate Module that can be selected and used separately before entering the Library. As File Naming and Renaming, Metadata Editing and Keyword Editing currently are implemented, I, for one, am always forgetting to fill out one of these critical sections and can't even seem to remember that some may need to be done before importing while others appear to be conceived to be done after importing. My point is, all these related steps really need to be done together, but the Interface spreads out the functions too much, and it is nearly impossible to build a logical and linear Import workflow, especially when you are first learning Lightroom.
    I'd like to see a workflow that walks me through applying and editing (in order), File Naming, Basic and IPTC Metadata, Captioning and Keywords, so that I don't always forget some obscure step in the process (which I keep doing). Here are some specific suggestions, some of which may prove to be valid, some of which may be problems due to my lack of experience with thye software.
    1. As currently implemented, Metadata editing requires too much thought, and does not have enough intelligent automation. Eliminate as much typing as possible (See Photo Mechanic!)
    2. Lightroom needs better Metadata Presets. A "Quick Edit" view to simplify interface for editing minimal metadata info (File Name, Basic Info, Keywords, Headline, Limited Copyright Info).
    3. Separating Keyword Tags, Metadata Browser, Keywording Presets and Metadata Presets confuses the workflow. They should all appear together under one selectable module that organizes a suggested, linear workflowfor these tasks, but allows it to be customized. This is the sort of tasks that need to be learned by rote memory, and having all these panes floating around on both sides of the photo make it impossible to quickly step through these tasks.
    - Name (or Rename) files, Edit/Apply Basic and IPTC Metadata, Edit/Apply Keywords, Import or...
    - Import, Name (or Rename) files, Edit/Apply Basic and IPTC Metadata, Edit/Apply Keywords, Import
    4. Rename should offer the option of renaming the master file names on the disk, not just file names in the database (which I think is what Lightroom does, but again, this is very confusing for new users)! So, it is my belief that this feature needs a checkbox option to rename one, the other or both. But you need to be able to quickly find this dialog box every time you do an import, and it should not be hidden away out of view under the Library menu. Ideally and logically (for workflow), File Renaming should be handled when starting the Import into Lightroom.
    This is critically important because many user

    Lightroom metadata editing Part 2 (see Part 1 at top of thread)...
    ...This is critically important because many users just do not want to trust their images solely to any database and we want the ability to go look for master files with identical names should something go wrong with the software or we decide to edit the file in Photoshop outside of Lightroom or even switch to another library software program.
    My own habit is to rename every file with the date followed by a unique, three-digit file number, as in 20070717_001, 20070717_002...up to 999 etc. (I have never shot more than 999 files in a single day, but this could be a four-digit number). To file these on disk, a folder with a similar naming scheme is created for each day's shoot, although a keyword slug is added to the end instead of file numbers.
    5. Metadata Presets (Basic Info, IPTC metadata, EXIF metadata), Keywords need to be able to toggled on or off (promote/demote-expand/contract). Turning Off/On one section at a time via the Metadata Presets popup menu is too tedious...and you can't display IPTC and Large Caption together or leave Large Caption turned on. It also is difficult to remember where the Large Caption default (Preferences) setting is...
    6. Please get the EXIF data out of the way entirely when editing captions and visa-versa...And the EXIF data should not separate Basic Info and IPTC Info fields. Please relocate the EXIF to the bottom of the Metadata pane...
    7. IPTC Content, IPTC Copyright, IPTC Creator, IPTC Image expand/collapse sections need more automation:
    - The Presets fields need Preset lists of entry choices for cities, states, countries, etc.!
    - ISO Country Code automatically should be filled in when a country is entered.
    - Date created automatically should be filled in from camera EXIF data
    - Metadata Presets "Save As" should fill in old name, and allow you to rename it; (When it appears, the new name field should not be empty. This would aid in consistent, alphabetical naming
    - Metadata Presets naming should support job names, with actual Presets saved under each job name...
    8. IPTC Status EXIF, Contact, etc.
    - Caption field MUST display more than one line...(6-8 lines)!
    - Caption field MUST support Shift/Return!
    - Headline (IPTC Content) should be displayed with (and above) caption. Please present information logically!
    - Yellow popups should describe what each field name is for...some are real brain teasers...

  • RPE-02083 again with OWB and Workflow

    Hi,
    We're having this problem once again. The last time we had to completely delete all our mappings, process flows, etc. and rebuilt them. This is very annoying ! And we don't have time to do this everytime we modify our OWB mappings. I opened a SR for OWB, but it seems that the problem is with the workflows. Any idea how we can find a decent solution...
    Thank you
    OWB 10.1.0.2.0, Database 10g rel. 1 and Workflow 2.6.3.5
    RPE-02075: Oracle Workflow failed to process the execution request for Activity LISTPRIX:SSDW_PRD_LAY_MAP. This may be because dependent objects have not yet been deployed.
    ORA-01403: no data found ORA-01403: no data found ORA-01403: no data found ORA-06512: at "SSDWRTR.WB_RTI_EXECUTION", line 129 ORA-06512: at "SSDWRTR.WB_RTI_EXECUTION", line 443 ORA-06512: at "SSDWRTR.WB_RT_EXECUTION", line 26 ORA-06512: at "SSDWRTR.WB_RTI_WORKFLOW_UTIL", line 28 Wf_Engine_Util.Function_Call(WB_RT_WORKFLOW_UTIL.EXECUTE_TASK, SSDW, WB_IK_2006213_105234_104764, 27346, RUN) RPE-02075: Oracle Workflow failed to process the execution request for Activity LISTPRIX:SSDW_CLI_LAY_MAP.
    This may be because dependent objects have not yet been deployed. ORA-01403: no data found ORA-01403: no data found ORA-01403: no data found
    ORA-06512: at "SSDWRTR.WB_RTI_EXECUTION", line 129 ORA-06512: at "SSDWRTR.WB_RTI_EXECUTION", line 443 ORA-06512: at "SSDWRTR.WB_RT_EXECUTION", line 26 ORA-06512: at "SSDWRTR.WB_RTI_WORKFLOW_UTIL", line 28 Wf_Engine_Util.Function_Call(WB_RT_WORKFLOW_UTIL.EXECUTE_TASK, SSDW, WB_IK_2006213_105234_104764, 27358, RUN) RPE-02075: Oracle Workflow failed to process the execution request for Activity LISTPRIX:SSDW_LPR_LAY_MAP.
    This may be because dependent objects have not yet been deployed. ORA-01403: no data found ORA-01403: no data found ORA-01403: no data found ORA-06512: at "SSDWRTR.WB_RTI_EXECUTION", line 129 ORA-06512: at "SSDWRTR.WB_RTI_EXECUTION", line 443 ORA-06512: at "SSDWRTR.WB_RT_EXECUTION", line 26 ORA-06512: at "SSDWRTR.WB_RTI_WORKFLOW_UTIL", line 28 Wf_Engine_Util.Function_Call(WB_RT_WORKFLOW_UTIL.EXECUTE_TASK, SSDW, WB_IK_2006213_105234_104764, 27366, RUN) RPE-02083: Process LISTPRIX has errored Activities.
    Dependent objects may not have been deployed. You can use Oracle Workflow Monitor to retry the activities or abort the Process. RPE-01002: The operation was aborted at user request

    Hello
    Its sad I can't find this thread searching here with "RPE-02083". Keywords to webmaster: Fulltext search, "LIKE", ... But luckily we have Google... ;)
    Concerning your problem we were experiencing the same for about a week:
    RPE-02083: Process WF_DMTRZ_BILANZD_DIGIS has errored Activities. Dependent objects may not have been deployed. You can use Oracle Workflow Monitor to retry the activities or abort the process.
    If you are working with more than one Design Repository and deploying the same Processflow or Mapping with different UOIDs you will run into this error message. Tough deployment was fine and all objects are valid in the DB, OWB checks on starting the workflow all dependencies by UOID, as I assume, and not by object name. So in situations where a started Processflow expects a mapping to be started and the UOID is different than expected you get the RPE-02083.
    A SQL script accessing the runtime/WF repository showing missing links (by UOID) would be helpfull here, but I guess it needs a lot of experience to create such a script.
    Hope this information can help your problem.
    Greetings

  • Workflow Agent Listener and Workflow Background Engine

    Hi all,
    I try to update roles via User Management responsibility but when applying them it throws the following warning: "Updates to Role data will not be visible in the application until the following processes are started : Workflow Agent Listener and Workflow Background Engine". So, my question is via which responsibility i can submit those requests and is there anything else i should know before creating, update roles and assigning permissions to them?
    Thanks in advance,
    Alexander.

    I checked the requests and i found that Workflow Background Engine completed successful. Only Open Period Balance finished with error but is it possible this to be the reason of the given warning? I believe not.
    And pls kindly explain what exactly means "you may need to log a SR."? Create a Service Request (SR) in My Oracle Support website so you get a help from Oracle Support Engineer (assuming you have a valid CSI number and MOS account) -- https://support.oracle.com
    Thanks,
    Hussein

  • Adding Branch to Validation and Assignment

    According to MDM Data Manager Reference guide page  (192/208), can not add "Branch" Validation and Assignment.
    According to guide when right-clikcked on expression the "Add Branch" menu option is Disabled.
    How to make it Enabled. Or is it a Bug that it is not enabled?
    Branch Value field is grayed out/disabled.
    Anybody had similar experience? How did you resolve it?
    Thanks,
    Abhay

    Thank you for you answer. I have a custom repository with no Taxanomy table.
    May be that's why the "Add Branch" option was disabled.
    Now the question is, Why do you need to have a Taxonomy to enable the "Add branch" feature?
    Here is my scenario:
    I want to run series of Assignments.
    I defined 5 assignments. Thought that I can use MDM Workflow to call them in series. However MDM Workflow does not let me connect one Assignmen Task to next Assignment Task. So though Branched Assignment would be helpful.
    However looks like can not use "Add Branch" to assignment to run them in series.
    May be I will put a new post.
    Abhay

  • Running Windows XP service pack 3. Updated Firefox from 8.0 to 9.0. Now when Firefox opens "The URL is not valid and cannot be loaded" is displayed in a window and no home page appears. What's wrong?

    Running Windows XP service pack 3. Updated Firefox from 8.0 to 9.0. Now when Firefox opens "The URL is not valid and cannot be loaded" is displayed in a window and no home page appears. What's wrong?

    That issue can be caused by an extension that isn't working properly.
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • Why do i keep getting an Alert message saying "The URL is not valid and cannot be loaded "?

    Why do i keep getting an Alert message saying "The URL is not valid and cannot be loaded "?
    This happens a lot regardless of the web page. I continually have to restart FF and it persists still

    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]
    * [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    * Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

  • Unable to check-in, check-out and workflow videos in an Asset Library

    Hi All,
    This may seem like a silly question but I have yet to find anything official about why you cannot check in/out video files in an Asset Library or workflow them. We have an approval workflow in our publishing environment which works great and I'm able to
    check in/out and workflow images and even documents in an Asset Library but not Videos. We want videos to go through an approval process as well and I'm not talking about simple Content Approval, we want it to go through an approval workflow but check in/out
    is grayed out/disabled and of course we can't workflow the videos.
    I take it there must be some reason for this but I haven't been able to find an explanation. Any info you can provide me was to why this functionality is disabled would be appreciated.
    Kind regards,
    Lisa

    Hi Lisa, it appears to me that Video content type do not have checkIn/Out feature as it derived from folder CT. You can use document library to upload video using document content type and then checkIn/CheckOut. Hope this helps.
    [email protected]

  • The URL is not valid and cannot be loaded

    seems like maybe firefox mishandles untrusted certificates?
    It gives error: Alert The URL is not valid and cannot be loaded.
    example:
    https://notes.corp.cat.com/
    other browsers can load this URL just fine. When I visit it in Firefox, I get the error in a simple little message box with a yellow triangle exclamation point, titled "Alert".
    ALSO.... when I click the "Home" button in firefox, I get the error, and the home page does not load. Currently the home page is set to "Mozilla Firefox Start Page."
    changing the home page to: http://www.google.com/ allows the home page button to work normally.
    restoring the home page to default brings the error behavior back when clicking the home button.
    changing the home page to: https://notes.corp.cat.com/ produces the same error, just like when I manually type in an https URL with a funky security certificate.
    This problem only seems to happen on secure URLs with untrusted certificates, i.e. sites that are too cheap to pay to have their certificate registered with one of the certificate vendors or however the hell that works, so as a result every time you visit their web site, your browser starts to whine that it might be a forgery or whatever.
    It used to be in Firefox that I could load these pages and just specify that I want to trust the site anyway. Now firefox gives this error that doesn't allow the user to know what is really going on or what the reason for the error is. It is as if the developers decided that users are too stupid to decide if they really want to visit the site or not, so as a result Firefox is just refusing to visit any web sites where the authenticity of the certificate can't be verified? Hey, it's not a bad idea, to be honest. :-) But it's kind of annoying, because here I am, sort of smart enough to know what I'm doing, but I don't have the choice in the matter...
    I restarted with all add-ons disabled and that didn't help. I don't have much installled in the way of add-ons anyway. All I have is JAVA quick starter 1.0, and Adobe Acrobat, Java development toolkit, Java platform SE, Microsoft DRM, and Windows Media Player Plug-in Dynamic Link Library. Not even Flash. All the above is disabled now that I rebooted with add-ons disabled, and I still have the issue.
    thanks for any help you can provide.

    Please [https://bugzilla.mozilla.org/show_bug.cgi?id=713167 see this.] Installing [https://www.microsoft.com/download/en/details.aspx?id=5638 Visual C++ 2005 SP1] or the .Net Framework 3.5 SP1 may help mitigate the issue.

  • Upgrade from 11i to R12 - Custom Forms,Reports and Workflows

    Dear Community Friends,
    We are planning for upgrade from oracle apps 11.5.10.2 to R12.
    We have custom Forms,Form Libraries,Reports and Workflows.
    Kindly provide me for approach on how to migrate Custom form libraries,reports and Workflows.
    I beleive, this thread will exists as one shot point for custom forms,reports,workflow upgradation from 11i to r12 with detailed steps.
    I know that many links exists here in the forum for all the above objects mentioned,but still from all those i am able to get a clear picture for oracle forms but not for custom form libraries ,reports and workflows.
    Also,this post will provide a low level,practical picture of the steps for those who are in line with this.
    Links i have read for all these in our forum are:
    For Custom Forms,
    Re: Planning to upgrade from 11i to R12
    Re: Custom forms: After upgrading 11i to R12
    ofcourse,'n' number of links exists providing metalink notes also.
    Hussain,Helios and some others also has given many updates regd this.
    For custom workflow upgradation,
    Upgrade Workflow 11i to R12
    Workflow Upgrade
    Workflow Upgrade
    For reports,links mentioned the below metalink notes:
    Do Not Compile EBS R12 Reports Using rwconverter.sh or Reports Builder from IDS 10gR2 [ID 786794.1]
    Using the OracleAS 10.1.2 Forms and Reports Builders with Oracle Applications Release 12 [ID 444248.1]
    Per my understanding, after searching in many threads,i am here by summarising the practical low level steps for custom forms migration
    Please correct me,if i am wrong.
    1) Download the Forms(.fmb's) and all PLL's(all the PLL from resource folder in AU_TOP) into a Local Machine Folder
    2) Open the forms using Forms Developer 10G and connect to DB
    3) Compile by clicking compilein Forms Developer and then save it.
    4) Upload the Saved Forms(.fmb's) into the new R12 server(system) in the respective custom paths(paths similar to 11i Server)
    5) Compile all the forms using the command like below(example command is shown below or f60 gen commands or frmcmp.sh utility) in the respective custom form paths,
    this will generate the .fmx's.
    frmcmp_batch module=FORMNAME.fmb userid=apps/apps output_file=FORMNAME.fmx compile_all=yes
    Link for compiling forms: https://support.oracle.com/epmos/faces/ui/km/SearchDocDisplay.jspx?_afrLoop=359210362972527&type=DOCUMENT&id=1085928.1&displayIndex=3&_afrWindowMode=0&_adf.ctrl-state=c348xvwbg_98
    6) Open the form and check in R12 instance
    As per my understanding for custom form libraries,we can just copy paste the PLL's from 11i server to R12 server (Please correct me,if i am wrong)
    Can anyone please help me out in custom reports and custom workflows.Sorry that,i could not get a practical and clear picture for reports and also for workflow even after referring many threads and metalink notes mentioned.
    As for reports,some says that Developer Suite 10g can be used and .rdf can be used in R12.
    Some says that reports should be converted to XML published as reports does not exists in R12.
    So,i am not clear on this.
    Thanks,
    Ganesh
    [email protected]

    Per my understanding, after searching in many threads,i am here by summarising the practical low level steps for custom forms migration
    Please correct me,if i am wrong.
    1) Download the Forms(.fmb's) and all PLL's(all the PLL from resource folder in AU_TOP) into a Local Machine Folder
    2) Open the forms using Forms Developer 10G and connect to DB
    3) Compile by clicking compilein Forms Developer and then save it.
    4) Upload the Saved Forms(.fmb's) into the new R12 server(system) in the respective custom paths(paths similar to 11i Server)
    5) Compile all the forms using the command like below(example command is shown below or f60 gen commands or frmcmp.sh utility) in the respective custom form paths,
    this will generate the .fmx's.
    frmcmp_batch module=FORMNAME.fmb userid=apps/apps output_file=FORMNAME.fmx compile_all=yes
    Link for compiling forms: https://support.oracle.com/epmos/faces/ui/km/SearchDocDisplay.jspx?_afrLoop=359210362972527&type=DOCUMENT&id=1085928.1&displayIndex=3&_afrWindowMode=0&_adf.ctrl-state=c348xvwbg_98
    6) Open the form and check in R12 instance
    As per my understanding for custom form libraries,we can just copy paste the PLL's from 11i server to R12 server (Please correct me,if i am wrong)You are right, and the steps mentioned above should be sufficient.
    Can anyone please help me out in custom reports and custom workflows.Sorry that,i could not get a practical and clear picture for reports and also for workflow even after referring many threads and metalink notes mentioned.
    As for reports,some says that Developer Suite 10g can be used and .rdf can be used in R12.
    Some says that reports should be converted to XML published as reports does not exists in R12.
    So,i am not clear on this.You can still use RDF files in R12, and just follow the approach you mentioned above, and you do not have to migrate them to XML publisher (though it is recommended, but this can be done after the upgrade as an enhancement task).
    For custom workflow, you need also to do the same thing, open them using workflow builder and make sure they work in R12 (correct the code if required and save them again in R12 once they work properly).
    Thanks,
    Hussein

  • HT204053 i want to change my icloud id on my iPhone, but it won't let me now that i have upgraded.  I no longer have the password and the problem is It is using an old id which the email isn't valid and the security question does not think my birthday is

    I want to change my icloud id on my iPhone, but it won't let me now that i have upgraded.  I no longer have the password and the problem is It is using an old id which the email isn't valid and the security question does not think my birthday is valid.  I cannnot delete the account because "find my iphone" wants the password linked to this old account.  But when i go into the find my iphone app it is using my corect Apple ID.  How do i fix this?

    If you still have access to your old email address, go to https//appleid.apple.com, click Manage my Apple ID and sign in with your iCloud ID.  Tap edit next to the primary email account, tap Edit, change it back to your old email account and verify it.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iPhone on your device. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https//appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  You can now go to Settings>iCloud and sign in with your correct iCloud ID and password.
    If you don't have access to your old email address, you will have to contact Apple to have them reset the password so you can disable Find My iPhone and sign into your iCloud account.  You can either go to https://expresslane.apple.com, select "More Products and Services", then "Apple ID", then  on the next page select "Other Apple ID Topics", then "Lost or forgotten Apple ID password" and click "Continue"; or you can contact Apple Support (http://www.apple.com/support/icloud/contact/).

  • Apple changed my Apple ID to the email address associated with my iTunes account. I now can no longer access my account because the old user name is no longer valid and has no password. I have been on the phone with tech support for hours trying to fix.

    Apple changed my Apple ID to the email address associated with my iTunes account. I now can no longer access my account because the old user name is no longer valid and has no password. I have been on the phone with tech support for hours trying to fix this. I can not update any of the apps associated with that user name.

    Is this itunes on the iPad or on my computer? Thank you for the reply.

  • Why does my app store account tell me that my payment method does not match my bank's records. my card is valid and works for iTunes but not the app store.

    While trying to change my Credit Card info: The app store tells me that my payment method information does not match my bank records and to try again or enter a new payment method. My CC is valid and its the same CC ive had for a while. This CC info works for iTunes but is not being accepted for the App store.I have changed this info online but cannot change it on my iPhone. Can anyone tell me what i need to do?

    Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
    To contact product and tech support: Contacting Apple for support and service - this includes
    international calling numbers..
    For Mac App Store: Apple - Support - Mac App Store.
    For iTunes: Apple - Support - iTunes.

  • HT2731 How do I remove an email address that is no longer vaild for the iTunes Store?  A really old email address keeps popping up on my iPhone, the email address is not valid and I have no idea what the password was.  It's been over two years.

    How do I remove an email address that is no longer vaild for the iTunes Store or my iPhone?  A really old email address keeps popping up on my iPhone, the email address is not valid and I have no idea what the password was.  It's been over two years.

    Hello tcnolen1,
    It sounds like you are trying to change the Apple ID logged into the iTunes & App Stores on your iPhone.  Use these steps:
    Changing your Apple ID account
    Tap Settings > iTunes & App Stores, then tap the Apple ID signed in.
    Sign out of the current Apple ID account and then sign in with another account or create a new Apple ID.
    You can find the full article here:
    iOS: Changing the signed-in iTunes Store Apple ID account
    http://support.apple.com/kb/ht1311
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

Maybe you are looking for