Validations for FB70, FB75 and FB60, MIRO without Tax Codes

Hi,
can u help on the below issue.
I want to restrict the users while posting(FB70, FB75 and FB60, MIRO) without tax codes, please provide Validations for the same.
Block AR/AP for postings without tax code - AR is FB70 and FB75 - AP is FB 60 and MIRO
Thanks&regards,
Rajesh

Hi,
Please check below validations for FB60 AND MIRO ,FB70 AND FB75
Prerequisite
BKPF-BUKRS = 'xxxx' AND SYST-TCODE = 'FB60'
OR SYST-TCODE = 'FB75' OR SYST-TCODE = 'FB70'
OR SYST-TCODE = 'MIRO'
Check
BSEG-MWSKZ
Please check ,
NARESH

Similar Messages

MIRO without tax code

Hi all,
I am not assigning MM with any Tax procedure as i dont have to take credit of it. So while po creation no tax code is required. But in MIRO it is asking for tax code. Please suggest can i have no FI procedure linking in MM. If yes, then how to tackle this in MIRO.

Hi,
Crete a input tax code in FTXP and maintain value 0(zero) & do MIRO with zero value tax code.
Regards,
Biju K

How can I view my full billing history for the app and music stores without iTunes installed?

I just received an email receipt from Paypal showing a $12.99 purchase from iTunes. I almost NEVER purchase anything over around five dollars in the app or music store. Since PayPal does not show what this purchase was for, I have not received the receipt from Apple yet, and I cannot find anyway to look up online what this purchase was for....I need help to find out ASAP what this purchase was. If my account has been compromised or if I have been incorrectly charged for something, I would like to get the issue handled immediately. I do not want to install iTunes on my PC (nor should I have to for Pete's sake), but I cannot see anything recent at all in my app or music history on my iPad (not that I would ever purchase anything for $12.99 anyway...I just don't). Thanks in advance for any tips!

How can I view my full billing history for the app and music stores without iTunes installed?
No.
If my account has been compromised
If you even think this may have happened, immediately change your password.
See this -> Apple ID: Changing your password

Validation for Profit Center and Trading Partner

Hi Gurus,
Please help me in creating validation for Profit Center and Trading Partner.
I want system to give an error if we use Trading Partner related to particular profit centers.
Please revert asap.
Thank You

Hello,
Please use T.code OB28 and select the call up point 2.
Than go to Prerequisite in expert mode and say
Prerequisite : BSEG-VBUND <> ' '
Check: BSEG-PRCTR = ' '
Error Message.: xyz
I have created Validation understanding if someone gives Trading Partner and also Profit center while posting a doc than it will generate an error message.
however if you have some diff req please change it accordingly/ take Abapers helps if not very clear.
I hope this helps
Regards
Shireesh

Validation for Project defination and project profile

Hello,
I have to create validation for Project Definition and Project Profile.User requirement is when the project (Exp: Z/0120) is creating with project profile Exp: Z0001_Z system should allow , If user is trying to select other than this profile system has to give the error.
I tried below validation but it is not working:
Prerequisite - PROJ-PSPID = 'Z'
Check - PROJ-PROFL = Z0001_Z
Kindly any suggest how can i give the validation for the same.
Regards,
Lakshmi.
Message was edited by: Mohamed Rafi - Many threads available on this topic search for those.

Hi,
Have you tried to save the project? Because validation rule will call at time of saving the Project.
I have created the same but for start with 'U'
When I create project and at time of saving, validation rule will call and system throw error if I don't create project start with 'U'.
Now If I am creating here, start with 'J'. System is throwing error as per validation rule.
Also Pl check if you have assigned same correct rule on project profile.
Regards
Shishir

Validation For Date,String and Date in a reports Region

Apex 4
Good day to all apex users How do I validate a apex_item.text if the value is string the user can only input a string value if it is number then the user can input numbers only and if it is a date the user can only input a date values?

APEX_ITEMS are not part of the default apex gui... In fact they are just functions which returns html.
You can however do some stuff with the attributes parameters. You can find some cool stuff over here: Re: Validation For Date,String and Date in a reports Region
If you want apex validation you need to create a page validation and loop over your apex_items with apex_application.g_f0x
Br,
Nico

How to get client side validation for double range and double field in stru

Hi,
I have achieved client side validation by using <html:javascript formName=""/>
All fields shows client side validation but double field and double range field is not shows client side validation but shows server side validation.
I am using Liferay jboss server.
Please tell me a way to achieve client side validation for double field and double range.
Thanks & Regards,
Brijesh Baser

I see in the query component there is a QueryListener and a QueryOperationListener. Have you tried letting Jdeveloper create methods for these in some backing bean, and putting in some debug code to see when these methods run? I would think one of them could very well be used to validate the input, somehow; if the input were bad you could just raise an exception and pass your error message, I bet.
If not...
I am pretty sure that there is an appendix in the Fusion Developer's Guide for Forms developers turned to Java...you might look at what it says for post query. I know in the 10.1.3.0 equivalent documentation, they gave reference to a method in the ViewObject which fired for each record after a query was run. You could definitely intercept this query return from there. In fact doing something like this may be something like what Frank N. was intending when he mentioned ViewObjects "validation". Not sure though. I am still learning what new features there are in 11g adf/bc.
Good luck.

Can I import binary in Flash CS5 and export swf, without AS code likes "Embed" ?

Can I import binary in Flash CS5 and export swf, without AS code likes "Embed" ?
I know I can use AS code,likes "[Embed]" metadata to embed binary in swf. But , how can I do that in Flash CS5 ?

Have a look at this: http://stackoverflow.com/questions/7816231/how-to-use-as3-to-load-binary-data-from-web-ser ver

HT1725 I had an itunes redemption code for a movies and got the following message: "code redemption temporarily unavailable. Try again later." several times. How do I get my movie?

I had an itunes redemption code for a movie and got the following message, "code redemption temporarily unavailable. try again later." How do I get my movie?

Hi r.viel,
I'm sorry to hear you are having issues with your redemption code.
The following article should help you with this:
iTunes Store: Invalid, inactive, or illegible codes
If you're still unable to redeem your code after verifying the characters in the code, you'll need to contact iTunes Store Support for help. You'll need to provide a digital image of the front and back of the gift card as well as the sales receipt for the purchase of the gift card.
Contacting iTunes Store Support
Go to the iTunes support page and select your iTunes country.
From the iTunes support page, choose Contact Support on the lower-left side of the page.
Follow the instructions to get iTunes Store support assistance.
I hope this information helps ....
Have a great day!
- Judy

Update Taxes in PO without Tax code in Purchase Order

Hi Experts,
Taxes percentage are frequently change in Indian business and create new input tax codes for updating the same changes in PO.
Please suggest without create new tax codes how can we maintained tax details in PO?
Thanks in advance.
Regards,
Shatrughan Singh

Hi,
Tax code creation required or not-Depends on which access sequence (JST1 or MWST ) used in your tax procedure.
If tax condition types have access sequence JST1,then you can maintain to change tax rate with validity period without creating a new tax code.
Validity Period available for tax condition types which have access sequence JST1 not access sequence MWST
Regards,
Biju K

G/L account item without tax code in document with deferred taxes

Hi ,
While releasing the billing document to accounting i get this error " G/L account item without tax code in document with deferred taxes". Not able to release it to accounts. What could be the possible reason??
Actually, this error is occuring only when i am using a Discount Condition (Z Condition).
Please guide what could be the problem in the Discount Condition?
Thanks and Best Regards

whats this Z condition type. Is it a tax condition type. If yes , please check the tax code assigned to this in the condition type defintion (VK12) and in FTXP check if this code is assigned with Account key.
Also in the pricing procedure, if this condition is Active (not statistical) whats the account key assigned to it. Then check whats the GL Account assigned to this Account key (VKOA).
Then in FS03 , check this GL account number and under "Control Data" whats the Tax category maintained. You can have a * for the tax category here.
Hope this helps
Regards
Sai

G/L account item without tax code in document $1 with deferred taxes

HI ,
while posting throgh Vendor invoice iam getting below mentioned issue,
G/L account item without tax code in document $1 with deferred taxes
message noLff891
Please reply as soon as posible,
Regards,
Prema.

Hi
Please check the note 913805
Suggest you to reffer the below mentioned link
Deferred tax: Post invoice and payment separately $1" Message no. DEFTAX020
http://www.scribd.com/doc/20787563/Temporary-Differences-Result-in-Deferred-Taxes
Regards
Praveen PC
Edited by: Praveen Chirakkel on May 20, 2011 7:31 AM

Validation for Business place and section for With holding tax

Dear friends
I defined validation for MIRO with respect to Business place and Section code to make mandatory, it is working fine.
But in case of F-47 / F-48 and FB60 I defined validation but not working.
Please help me in this regard
Thanks in advance
Kiran A

Hi
Your query is not clear? What is the prerequisite and check you have defined in validation rule? I doubt that in prerequisite you have defined the T Code MIRO. Pls check and assing the other T Codes also if that is the case.
Regards
Sanil K Bhandari

DSL Not Working for 7 Days and Tickets Closed without Resolution - Worst Customer Service

My DSL light has been blinking for 7 days. A technician came out Monday and checked inside my house and outside. He said the problem is outside, that there is an issue with the wires on the street. He said that the "Home Office" needs to internally switch the wires. The technician went to the "Home Office" which is right down the street but the technician was not at her desk so he put in a request for the wire to be switched. In the meantime, he manually switched the wires to get the internet working but said the internet would go down for 5-10 minutes when the "Home Office" did the official switch. When I got home from work, my internet was not working and my DSL light was blinking again. I immediately called Verizon and was told that my ticket had been closed and that a technician would need to come out again. Since the technician had already been in my house that morning and confirmed the issue was with the wires on the street and not my house, I told them no one would be home because I could not take another day off from work. It was understood that the technician could reach me by cell phone if he needed to talk to me but he was coming to look at the wires on the street. A visit was scheduled for the next day, Tuesday. I received a voice mail from the technician that he would be at my house in 20 minutes and would call me when he arrived. I never heard back from him and when I got home, my internet was still down. I immediately called Verizon to check on the status of the ticket. At first, the agent couldn't even locate my ticket but then informed me it was closed. I questioned the closure of the ticket since the problem had not been resolved. I then proceeded to be on hold for an HOUR while the agent tried to find out why the ticket had been closed. After an hour, the response was he didn't know and that I would have to open another ticket for an agent to come out AGAIN. The agent then insisted I needed to be home because the technician needed to check inside the house despite being told by me that the technician had already been in my house the day before and confirmed the problem was on the street. The agent then told me I needed to be home so the technician could update me. I told the agent the technician could call me on my cell phone since he clearly has the phone number since he called me on Monday AND Tuesday. The agent agreed and I gave my cell phone number again for the technician to call me. There are no appointments available until Thursday which will be 8 days since the internet went down. At this point, after 3 tickets opened, two that were closed without the problem being solved and two site visits with a third scheduled and 60 minutes on the phone,I am doubtful the issue will be resolved Thursday. I've reached the point where if the problem isn't fixed on Thursday, I am canceling my service with Verizon after six years. I shouldn't be paying for service that Verizon can't even provide because their own technician can't fix an issue with the wires outside my house.
This experience has been frustrating and the worst customer service I've ever experienced.

Your issue has been escalated to a Verizon agent. Please go to your profile page for the forum, and look in the middle, right at the top where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
Under “My Support Cases” you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis as the agent may be waiting for information from you before they can proceed with any actions. Please keep all correspondence regarding your issue in the private support portal.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer that solved your issue as the accepted solution.

Product is not valid for Sales org and distribution chain

Hello friends,
When i am saving the trade promotions , i am getting error message
"Product XXXX is not valid for distribution chain XXXX, XXXX"
I have maintained sales organization and distribution channel in commpr01 under sales and distribution tab.
kindly help.
Regards,
Srinivas

Hi Srinivas,
the error is raised from the trade promotion CCA check - raised from method CL_CRM_MKTGS_PD_CCA_CHECK_HDLR~CHECK. There are the following checks performed:
* There are several checks to do based on the distribtion chain
* Execute the checks and identify which products fail which check
1. *   Determine if the product passes the distribution chain check
2. *   Determine if the product category 1 of the product assignment
   *   passes the product category check
3. *   Determine if the product category 2 of the product assignment
   *   passes the product category check
4. *   Determine if the product group of the product assignment
   *   passes the product group check
5. *   Determine if the sales status of the product is set to blocked
You may also need to check the sales and distribution data of the product category or product group of the mentioned product, if this is assigned to any.
best regards,
Johannes

Validations for FB70, FB75 and FB60, MIRO without Tax Codes

Similar Messages

Maybe you are looking for