Validity End Date for A012 relation not updated

Hi All,
I am working on SRM5.0 and the HR org structure is replicated from ECC to SRM via idocs. Now, for one particular user, who holds position in 2 org units, the HRP1001 table data is incorrect.
For one of the relations A012 between S-O, the end date shown is in the past. I checked the ECC tables for this employee and the A012 relation is valid till 31/12/9999. But, in the SRM system, this date does not get updated.
Due to this employee is not shown as an approver for that particular org unit.
Does anyone know how I can update this date?
Regards,
Ancy

One of the Org unit is under the other org unit. So, I updated the position with the relation to the higher org unit only. So in the SRM system, by default, the supervisor for this org unit is the supervisor for the lower org unit too, unless there is a new supervisor for the lower org unit.

Similar Messages

Scheduled finish date for process orders not updating in BW

We are having problems with the scheduled finish date (GLTRS) for process orders. When the process order is already released, changes done in R/3 on the scheduled finish date will not result to a delta hence data in BW is not updated. Table AFKO, where data is coming from, is always updated with the changes though. 2LIS_04_P_MATNR is used in extracting the data.
Has anyone experienced the same problem? We are looking for possible ways on how to have a delta whenever there are changes on the process order even after it is already released.
Any help would be greatly appreciated...

Hi Donna,
If I've understood your problem correctly, you can increase the load frequency as Sriee has pointed out.
If you want latest data frequently and if you are on BI 7.0 then you can look at Real Time Data Acquisition(RDA)
Regards,
Tom.

CIF of SA is not consistent for Validity End Date

Hello gurus,
Our company is quite new in using SNC, and we bumped into this problem (see description below), and hopefully this forum can help us.
<Description>:
When the Scheduling Agreement is CIFed from R/3 (ECC) to SNC, the Validity End Date does not get updated each time.
It gets updated sometimes, but not always. It is inconsistent behaviour.
<Example>:
Scheduling Agreement A
Validity End Date: 31.12.2012 Changed to 30.11.2012 in R/3.
Performed CIF using Transaction Codes CFM1 and CFM2.
Correctly updated the Validity End Date in SNC.
For the same Scheduling Agreement A updated Validity End Date to 31.01.2013 in R/3.
Performed CIF using Transaction Codes CFM1 and CFM2.
The Validity End Date was not updated in SNC & remained as 30.11.2012.
For the same Scheduling Agreement A updated Validity End Date to 15.10.2012 in R/3.
Performed CIF using Transaction Codes CFM1 and CFM2.
The Validity End Date was not updated in SNC & remained as 30.11.2012.
Thanks guys
Tuffy

Hi Tuffy,
1 - I am just wondering if after the Delete the existing External Procurement Relationship in SNC, and CFM1 and CFM2 the SA (i.e. changed my validity end date value) to the SNC, will the problem of the SNC side not able receive the changed SA??
When there is a change in the SA, integration model would create the same in SNC if it does not exist. But the transfer from ERP does not happen just like that. First, make sure that the message type (CIFSRC) has been checked in BD50 and then schedule a job to periodically transfer the SAs.
2 - What does the tcode the person in the SNC side have to double check to ensure the SA is transmitted there??
The t-code is /SAPAPO/MTI2 - External Procurement Relationship.
3 - Someone in our company advise BASIS team to check the transactions BD50 and BD52. What exactly does it mean and does it help?
This is correct. I mean guys who are responsible for Integration model need to set-up BD50, BD52 so that changes to SAs are transferred periodically.
Regards,
Sandeep

How to set up start and end dates for validity of contract account in FICAx

Hi,
Can anyone tell me where can I set up the validitiy period for the contract account in FICA. In contract creation, I could just see the contract validity start date. I also need to know the validity end date. Please let me know the solution asap.
Points will be awarded for all the useful answers.
Thanks
Santosh

Yes, you're right, you would then need to develop a lot of user exits to prevent the re-use of the contract account after the validity date.
I'm think in a strange solution, it could work but you'll need to test it. if a contract account is marked for deletion (Field FKKVKP-LOEVM equal to 'X') no further action can be made over it, When you create you contract account you can schedule a change using as validity date (Field BUS000FLDS-VALDT ins the change contract account screen) to the end date of you contract account and set this deletion flag. then you run FPP2A to activate the schedule changes, before you get to the end date the flag is not set, when you get to the end date FPP2A will activate the flag and the contract account becomes not usefull.
If you do this, you have be careful because all the postings to the contract account won't be possible, it means that if there are payment to be made, interests to be calculated, etc... nothing will be posted.
Cheers,

Validity end date is not getting copied from inquiry to quotation.

Hi Friends,
While creating quotation the validity end date is not getting copied from inquiry to quotation.
What setting needs to be done, pl suggest.
Regards,
Hari.

Sreehari,
i dont find any logic of having Same validity date for Quotation and Inquiry....
the simple reason is explained by example: Say you have created Inquiry on 1st november and end date is 15th novembr. Customer comes to you on 14th november and asked for Quotation, and if you refer quotation on that day that means its only applicable for one day, which generally wont be the case.
There is no option for copying the validity dates from Inquiry to Quotation as per standard. If you want, create routine, place it in copy control.
Thanks,
raja

Employee qualification assignment IT0024 validity end date update

I Would like to change the validity end date value on one specific qualification assigned to an employee.
I can't do it using PA30. Is there anybody able to tell me how can I do it?
Thank you

You can't change endda because infotype 2 endda has to be '31129999'.
It's explicit here in this validation in module POST_INPUT_CHECK.
form check_it0002.   "form aus mppers00 hierher verlegt    "VLDN212840_2
if psyst-first eq yes and cprel-endda lt high_date.
*   I105(RP): Gültigkeitsende muß gleich & sein
    p0002-endda = high_date.                               "VLDN212840_2
    cprel-endda = high_date.                               "VLDN212840_2
    message e105(rp) with high_date.
endif.
if psyst-ioper eq modify.
    if cprel-endda lt high_date and pskey-endda eq high_date.
      p0002-endda = high_date.                             "VLDN212840_2
      cprel-endda = high_date.                             "VLDN212840_2
      message e105(rp) with high_date.
    endif.
endif.
endform.                    " check_it0002
high_date is a constant with value '99991231'.
Anyway, why would you want to change the endda on infotype 2 ?

'Valid to' dates for both the Header & the components in the BOM report.

Hi Experts,
My Requirement:
Need to display the 'Valid to' dates for both the Header & the components in the BOM report.
Right now we are using the Functional modules 'GET_STKO' & 'GET_STPO' for the header
& the components respectively. The report gives the correct output for the all the BOM alternatives
which exist. But for the BOM alternatives which have been deleted(updated in STKO-LKENZ)
'Valid to' dates are displayed as'00/00/0000'.
(Note:ECM is used for BOMs)
Is there any Logical Database that I can fetch the 'Valid to' dates of both BOM Header & components
which are deleted?
Regards,
Mahesh

Dear Mahesh,
In my understanding I dont think you cannot get the valid to date for BOM header,unless a ECN,(engineering change number) is
used to set the deletion flag.In otherwords none of the business sets for all these BOM's the valid to date(which means the
default valid to date 31.12.9999 is taken).
Check with this FM, CS_BOM_EXPL_MAT_V2 whether can you get the valid to date for the components(infact here also the
valid from date given in the input screen impacts the report output).
Check and revert back.
Regards
Mangalraj.S

Start and End dates for users in Enterprise portal

Hi Expert,
I have to maintain start and end dates for around 200 users in 4 different Java systems. When I export the file of users it does not capture the validity fields. Is there a way/script to automate this? Otherwise I will have to do it manually.

Hello
Please check below URL for User Import Format:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/48/abdd83c3333205e10000000a42189c/content.htm?frameset=/en/48/a96f43db653206e10000000a42189c/frameset.htm&current_toc=/en/43/05e450d1cd6e95e10000000a11466f/plain.htm&node_id=2802&show_children=true#jump2822
Regards,
Tapan Goyal

Change validity end date on activity type

Is there a way to change the validity end date of an activity typre. Currently it is 9999 we would like to change it to 2011.
We would like to use a particular activity to cost current standards but dont want to use it for planned estimates that we will create for 2011. I am assuming if the validity ends in 2011 it will resolve the problem. I know we could create alternate routings and different production version but I am trying to avoid that and see if we can find a short cut.
Your help in this regard will be much appreciated

Hey Greta,
I executed the report but it says ,"The deletion could not be carried out, plan records still exict on cost center for activity type." I have deleted every thing from kp26 for that particular combination of activity type and Cost center.
Any ideas as to what is happening!!
Regards,

Urgent-change the end date for a existing wage type.

Hi,
Can u pls let us know how to change the end date for a existing wage type.
The current end date is 30.8.2008 and we would like to change to 31.12.9999.
Rgds,

Use This report RPCLGV00
The Wage Type Distribution report enables you to display wage types for several payroll periods. It does not take into consideration differences resulting from retroactive payroll. The report shows the current values (number and amount) for each wage type. The report evaluates the payroll records that are marked with update indicator A when the report is run. Subsequent reporting runs may not give the same result if - in the intervening period - retroactive payroll has taken place for the evaluation period. The wage type distribution uses the data from the results table RT for the relevant payroll result. The employees organizational assignment is also evaluated from the payroll result. This data is taken from the Work Center Basic Pay table (WPBP).
The wage type distribution offers you the following options for evaluation:
Individual reporting for a specific personnel number or name.
Totals evaluation without specifying a personnel number or name.
You cannot use wage type distribution to run a report for several countries. You can only select payroll areas from one country for reporting.
Scope of Function
You use the following parameters to determine how the appearance of the wage type statement:
Wage type for evaluation
Enter all wage types that are to be evaluated. If you do not make an entry here, the system selects all wage types. Note that you can only select wage types that occur in the RT table.
Evaluation start date
Evaluation start date and evaluation end date define the evaluation period. Enter the year and payroll period for the start of the evaluation.
Evaluation end date
This parameter delimits the evaluation period. If you do not make an entry here, only the period from the period from the parameter Evaluation start date is evaluated.

How to Calculate End-Date for a given Startdate in business hours without holidays

Hello Experts,
I need to create a plsql function where we need to determine end date for a task. For this, input will be only start date & number of hours allocated for that task. Based on this input we need to exclude Business hours & need to include only Business hours. and in the end we need to achieve the end date after the hour addition to the start date.
Example : INPUT: 03-OCT-2013 12:00:00 PM /
                              Hours Allocated 30 Hrs.
Business Hours - 11 AM to 9 PM.
So time starts from or Startdate is Friday 03-OCT-2013 12:00:00 PM.
So If I want to calculate the end-date by adding 30 hours to it, it should come WednesDay 09-OCT-2013 12:00:00 PM because I excluded Weekends & considered only business hours that is 11 am to 9 pm.
I am not able to get any such guidance in Internet as most of the docs are having start & end date as input.
Please help!
Thanks in advance !!

Hi,
As Christ said, there's no nuilt-in Oracle function to tell whether a given DATE is a holiday or not, partially because there's so much local variation in holidays. You can write a function like that (see http://forums.oracle.com/forums/message.jspa?messageID=3351081 ), but creating a table will be simpler and more efficient.
I suggest creating a row for every date, whether it's a work day or not; that way, you can have variations in the schedule (e.g., schedule changes and
partial holidays).
CREATE TABLE work_calendar
(   dt DATE       PRIMARY KEY
                   CONSTRAINT work_calendar_dt
                       CHECK (dt = TRUNC (dt))
,   day_type       VARCHAR2 (8) NOT NULL
                   CONSTRAINT work_calendar_day_type
                       CHECK ( day_type IN ( 'HOLIDAY'
                                           , 'WEEKEND'
                                           , 'WORK DAY'
,   start_time     DATE
,   end_time       DATE
,   work_hours     NUMBER
,   work_hours_since_1970     -- or some point earlier than you'll ever need
                   NUMBER
,   CONSTRAINT work_calendar_start_time
        CHECK ( TRUNC (start_time) = dt)
,   CONSTRAINT work_calendar_end_time
        CHECK ( TRUNC (end_time) = dt)
This will let you do a lot of the calculations you need without a function.

Validity end date tab is suppressed in scheduling agreement

Hi ,
In scheduling agreement , Validity end date tab is suppressed ,
There is no layout is assigned to the doc type & standart transaction varient is acitve , but while doing ME31L above field is not coming ( it is in suppressed / hide mode )
Please let me how to get that validity date tab in scheduling agreement.
Thanks,
Pradeep

Hi,
Go to SPRO > IMG > MM > Purchasing > Purchase Order > Define Screen Layout > NBF > Administrative data, header > make the fiels Validity Period field optional / Required.
Hope this will help you.
Regards,
Manish Jain

How to set a default start and/or end date for New Events based on trigger date.

I'm using the CalendarActivityListener to get current row when clicking on an existing event. As per previous posts this listener gives you access to event detail including Start Date, End Date, etc.
However, what I want to do is to default the start (and end) dates for New Events based on the trigger date.
I've tried the CalendarListener and can grab the Trigger Date from it - however, I can't see a way to pass this directly to the popup/dialog I'm using to create the new event.
At present I'm putting the TriggerDate into the ADFContext session scope e.g. ADFContext.getCurrent().getSessionScope().put("TriggerDate",calendarEvent.getTriggerDate());
Then, I've tried multiple approaches to try and "get" the TriggerDate from session scope to drop it into my new Calendar Event basically, I'm trying to default the InputField(s) associated with the Start Date using the value from the session - I've tried
1. setting the default value for the InputField in the jspx using a binding expression i.e. value="#{sessionScope.TriggerDate}" - this actually sets the value appropriately when the jspx is rendered but, when I go to create I get a NPE and I can't debug. I assumed that it might be a Date type issue - it would appear that CalendarListener provides a date of type java.util.Date and that the StartDate attribute of my VO/EO/table is a DATE and therefore requires oracle.jbo.domain.Date so I tried casting it - to no effect
2. Using a Groovy expression *(StartDate==null?adf.context.sessionScope.TriggerDate:StartDate)* in my calendar's EventVO to default the Start Date to the same result
Any thoughts or ideas?

John,
Thanks for that suggestion - could not get it to work. However, I did manage a different approach. I finally determined the sequence of events in terms of how the various events and listeners fire (I think).
Basically, the CalendarActivityListener fires, followed by the listener associated with the Calendar object's Create facet, followed finally by the CalendarEventListener - the final is where the TriggerEvent is available and then finally, control is passed to the popup/dialog in the Create facet. So, my approach of trying to set/get the TriggerDate in the user's HTTP session was doomed to failure because it was being get before it had been set :(
Anyway, I ended up adding a bit of code to the CalendarEvent listener - it grabs the current BindingContext, navigates through the DCBindingContainer to derive an Iterator for the ViewObject which drives the calendar and then grabs the currently active row. I then do a few tests to make sure we're working with a "new" row because I don't want to alter start & end dates associated with an existing calendar entry and then I define the Start and End dates to be the Trigger Date.
Works just fine. Snippet from the listener follows
BindingContext bindingContext = BindingContext.getCurrent();+
*if ( bindingContext != null ) {*+
DCBindingContainer dcBindings = (DCBindingContainer) bindingContext.getCurrentBindingsEntry();+
DCIteratorBinding iterator = dcBindings.findIteratorBinding("EventsView1Iterator");+
Row currentRow = iterator.getCurrentRow();+
if ( currentRow.getAttribute("StartDate") == null)+
currentRow.setAttribute("StartDate", calendarEvent.getTriggerDate());+
if (currentRow.getAttribute("EndDate")==null)+
currentRow.setAttribute("EndDate", calendarEvent.getTriggerDate());+
*}*

End date for support of Solaris 2.5.1

Is there anywhere that the end date for patch support for 2.5.1 can be found? A link would be most appreciated.

www.sunsolve.sun.com
is the site where u will get all patch updates detail
cheers
Dhruva

Validity start and Validity End date in PO

HI gurus
can you plz tell me how to activate validity start and Validity End date in PO
Neha

Hi,
It is applicable for PO done for Frame work oder with Doc type - FO(Frame work order)as its an agreement of supply of stock only between specified period.For this kind of Doc type system makes it mandatory to enter the valisity start and end date.
Thanks

Validity End Date for A012 relation not updated

Similar Messages

Maybe you are looking for