Validity - icrosoft Windows 7 Ultimate (64-bit) не работает на hp elitebook 2740p

Microsoft Windows 7 Ultimate (64-bit) - hp elitebook 2740p после установки драйвера в диспечере задач пишет что все правильно установлено, но при запуске программ датчик не обнаруживается программами

Hi BrandonM189,
Welcome to the HP Support Forums!
I am sorry to hear that you are having trouble with the Fingerprint sensor on your HP EliteBook 8560p Notebook PC. Your notebook is a Business computer and you will get your the best answer on the commercial forum. You can post here at the HP Enterprise Business Community.
In the meantime here is the HP EliteBook 8560p Notebook PC that may have the information that you need.
I hope this information helps.
Take care and have a great day!
I worked on behalf of HP.

Similar Messages

Error 0x80300024 when trying to install Windows Ultimate 32 bit on a T60

I have been trying to install Windows Ultimate 32 bit on a T60 with a 128GB Solid state hard drive and I keep getting the error "Windows cant install to the current location Error code 0x80300024" I have formatted the drive in another PC, created the bit locker partition, but still windows says it is "unallocated space" Can anyone help please
Moderator note: OS corrected in subject line

Says "A problem occurred while extracting the archive. Please try downloading the Photoshop Lightroom 5.7.1 installer again".
Thanks!

Intel Matrix Storage Manager disables Windows Update and Windows Validation on Windows 7 64-bit

I have a Lenovo ThinkPad R61 8918CTO on which I did a clean install of Windows 7 Ultimate SP1 (64-bit) on a new Seagate Momentus XT 750GB drive. The installation was trouble-free, as were all of the post-install Windows Updates.
Then I installed ThinkVantage System Update 4.03 and used it to install most of the available Lenovo updates. Big mistake. I'll spare you a detailed account of the hours I wasted troubleshooting, rolling back to previous restore points, and doing more troubleshooting, but it turns out that installing Intel Matrix Storage Manager driver v. 8.9.2.1002 caused Windows Update and Windows Validation to fail.
Symptoms: Windows Update control panel can't check for updates and reports that the Windows Update service isn't running when it actually is. Online Windows Validation fails and the standalone Windows Validation utility won't install. Microsoft programs that require a validated copy of Windows (e.g., Microsoft Security Essentials) won't install.
Solution: Roll back the driver for the relevant SATA controller to the previous driver.
I've reinstalled ThinkVantage System Update 4.03 and hidden the proposed Intel Matrix Storage Manager update; since then, I've used it to complete my Lenovo updates without issue.
I hope this post will help other people with this problem find the solution a lot faster than it took me!

This happened after installing a new advanced format drive with 4k-byte sectors, I'd guess. If the storage driver doesn't report the physical sector size to Windows, update fails.
I just ran across this myself (again) putting Win 7 on a T400.
I don't know why this is still going on. It may be that the update lists for older machines still have pre-AF-drive drivers listed.
FYI, another fix is going to the Intel site and installing the latest Matrix Storage Manager AHCI driver. This may be more desirable than rolling back to an older driver in some cases.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Unable to install itunes 10,5.I receive this message: there is a problem with this window installer package. A program required for nthis install to complete could not run. Contact your support personnel or package vendor.Am using window ultimate 64 bits

I am unable to install itunes 10,5. I receive this message: There is a problem with this window installer package. A program required for this install to complete could not run. Contact your support personnel or package vendor. I am using window 7 ultimate 64 bits

There is a problem with the Window installer package. A program required for this intall to complete could not be run. Contact your support personnel or package venfor.
Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?

Cant install windows ultimate 32 bit on my imac.

i cant install windows 7 ultimate on my imac every time i gets to the part wherr you shall pick the boot camp it says that i should put a cd with a driver in it put the windows cd wont get out.

Hi Andreas,
Please specify your hardware and software. Running OSX? Which version? Old hardware/new hardware?
It is not sure what your problem is: is it that the CD will not eject? Or is it that the winbdows cd is not installing?
Lex

Windows 7 64 bit: Just installed firefox and pages will not load, or are very slow, IE explorer loads instantly

I installed windows ultimate 64 bit, Tried to install firefox for my default browser. Internet explorer loads everything like normal, no problem but firefox will not load or does after 5 mins +
I checked my firewall windows provides and Avira to see if they were blocking, Found nothing of anything being blocked.
This is a fresh installed windows 7, No viruses or malware

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.com/kb/Server+not+found
*https://support.mozilla.com/kb/Firewalls

Windows Vista 64 bit w/older 2 dual core 3.0ghz Mac Pro with NVIDIA 7300

I have read a variety of the posts that have appeared here on the use of Windows Vista 64 bits on a Mac Pro. I remain confused, and but want to do this. I have a Mac Pro purchased in the Spring of '07 with dual 3.0Ghz dual core Xeon cpus and 10gb of ram, using the NVIDIA GeForce 7300 GT and running 10.5.1, with multiple drives. I want to run the 64 bit version of Vista Ultimate to use my ram, and to gain the performance this box should offer. It appears that I have three options:
1. Boot Camp: I don't know if the drivers are available, seems like the new Mac Pro drivers probably would not work, even if I could find them, since I have an older Mac Pro with a pair of the dual core Xeon CPUs. Don't know if there is an alternate source than Apple for the drivers, or a way to get around the problem in boot camp.
2. Parallels: I do not believe that 64 bit apps are supported by Parallels
3. Fusion: Their web site says they support Win Vista 64 bit, but it is not clear to me on the web site where the drivers are obtained, or perhaps they are built in to Fusion. Will I get the performance and memory benefits in fusion? Or is the OSX virtual overhead so high that this is a fools errand?
I do a lot of video editing, and fully 95% of my life is in the Mac world, but I have individuals who send files for editing, and occasionally they require Windows tools, much to my chagrin. I also have a small number of programs that need Windows 64. I occasionally am required to do some development work, and would like to use this machine for that purpose if it can indeed run Win Vista 64bit. I have XP loaded on a more modest box andit is running fine when I need it, which isn't very often.
Any help, or successful experience in running Windows Ultimate 64 bit on this hardware, utilizing its resources would be greatly appreciated.

Here are my results after further digging online and from my own experience.
Here is the procedure:
1. Check whether your Mac has the 32-bit EFI or 64-bit EFI
http://www.ihackintosh.com/2009/08/snow-leopard-106-and-64-bit-what-you-need-to- know/
2. Create a Boot Camp (BC) partition for Windows 7 x64. Resize the partition size using the slider in the BC app. Follow the instruction, insert the Windows 7 disk and reboot.
3. This will load the PC partition which is FAT formatted for now. Choose the Boot Camp partition on which to install Win 7, but choose in the option to format that partition. It will automatically format it in NTFS. Otherwise, it will not install on that partition.
Note : A "OEM System Builder" Windows 7 64-bit Professional UPGRADE install without any issues what so ever. The upgrade disk is a full install. Read this for further information:
http://www.pcworld.com/article/174288/windows7_upgrade_madecheaper.html
4. Run windows, then insert the Snow Leopard disk. It will tell you your hardware cannot support x64 version. Do the following procedure to manually install the driver:
http://michael.anastasiou.me/index.php?option=com_content&view=article&id=22%3Aq boot-camp-x64-is-unsupported-on-this-computer-modelq-solution&catid=7%3Ahow-to&l ang=en
5. Then update Boot camp using Apple Software Update in Windows.
6. All hardware works fine except the sound. The sound only comes out of the internal speaker, even when headphone or speakers are plugged in the jack. Installing the Realtek High Definition Audio Codecs driver in order to fixe the problem. Shutdown and reboot to make it applicable. Try a second time if it still does not work:
http://218.210.127.131/downloads/downloadsCheck.aspx?Langid=1&PNid=14&PFid=24&Le vel=4&Conn=3&DownTypeID=3&GetDown=false
That's it.

6490m driver update windows 7 64 bit

Hi together,
I own a early 2011 MacbookPro with an AMD Radeon HD 6490M graphic card and an Intel 3000 HD in addition.
I installed Windows Ultimate 64 bit via bootcamp.
Now I'm facing the error, that the driver I installed by Apple Support Folder (downloaded before in MacOS by bootcamp assistant) ist very old (begin 2011) and I'm not able to install the driver. It says that there is no correct graphic hardware at my system. The AMD Homepage says that 6400M series is supported but I can't get it to work.
Afterwards I installed the latest beta driver (12-8_vista_win7_win8_64_dd_ccc). It installed with no problems but afterwards hardware manager reports that I'm having a AMD 7700M graphic card (I don't remember the name cause I uninstalled it because of extreme bad performance - more laggy then before).
Now I read several threads in here and found a driver version of 11/2011. That one install a graphic card which is called 6400M which usually would be right cause it's the 6400 series. But this driver had same bad performance (40-60fps in counterstrike 1.6) like the other one.
Does anybody now where I can get the latest driver including catalyst center for my AMD Radeon HD 6490M?
It would be really nice if anybody could help me.
I'm sorry for my bad english. If there are any questions please ask.
Regards and thank you!

Graphic switching on Macs only works within OS X. When in Windows, the discreet GPU runs all the time. This is the way it has been since Apple introduced systems with multiple GPUs. And being that I actually own a machine similar to the OP's that runs both Windows and OS X, and you own an HP, it goes without saying that I know more about this than you do.
To the OP, the correct drivers can be downloaded by following the link at the bottom of this page:
http://www.guru3d.com/files_details/amd_catalyst_12_10_whql_download.html
Before installing, make sure you have the Microsoft .NET framework 4.0 and all its security updates installed on your machine.
Uninstall the drivers you have now via control panel/programs and features, reboot, and run this package from the link above. When it finishes, reboot, and it will display "AMD Radeon HD 6400M Series" in device manager. This is the correct naming scheme when you install drivers that are not directly provided by Apple. I have the same set installed on mine, and it says "AMD Radeon HD 6700M Series."

My HP laptop not working properly after installing window 7ultimate 64 bit

This laptop is provided by UP Govt (INDIA). i installed windows ultimate 64 bit,2 days ago and installed all the drivers. But their is two drivers which is giving errors. these are
1)PCI Device- ERROR IS---The drivers for this device are not installed. (Code 28)
Hardware id is
PCI\VEN_10EC&DEV_5209&SUBSYS_3564103C&REV_01
PCI\VEN_10EC&DEV_5209&SUBSYS_3564103C
PCI\VEN_10EC&DEV_5209&CC_FF0000
PCI\VEN_10EC&DEV_5209&CC_FF00
2)Ethernet Controller- ERROR IS--- The drivers for this device are not installed. (Code 28)
Hardware id is
PCI\VEN_10EC&DEV_8136&SUBSYS_3564103C&REV_05
PCI\VEN_10EC&DEV_8136&SUBSYS_3564103C
PCI\VEN_10EC&DEV_8136&CC_020000
PCI\VEN_10EC&DEV_8136&CC_0200
My main problem is that laptop is hangig too much continously. i dont know what is the exact reason and what should i do..Its not heating so their is null chances of heating effect.. I wants to get rid of this hanging problem.Pls provide me link for to download the genuine drivers and solution for this hanging problem..As it was not hangig earlier on Windows 7 home basic (provided by Hp)
This question was solved.
View Solution.

Hi:
Here are the links to the drivers you need...
PCI\VEN_10EC&DEV_5209:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103100-1&cc=us&dlc=en&lc=en...
PCI\VEN_10EC&DEV_8136:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100079-2&cc=us&dlc=en&lc=en...
The only suggestion I can offer regarding the notebook not running so good is to download and install the amd chipset drivers from the link below and reboot.
http://support.amd.com/en-us/download/chipset?os=Windows%207%20-%2064

The Opration timed out occurred on calling REST Service in Addin in windows 7 ultimate 64 bit

Hi,
I have created VSTO solution for Outlook Addin in Visual studio 2010.
In that on button it will call Java REST webservice and validating the username and password.
Evrything working fine in few systems.But it showing "The operation timed out" in WIndows 7 64 bit office 2013.
In other windows 7 machine with office 2010 and 2007 its working perfectly.
Below is the code :
var responseMessage = (String)null;
var request = WebRequest.Create(string.Concat(serviceUrl, resourceUrl)) as HttpWebRequest;
if (request != null)
request.ContentType = "application/xml";
request.MediaType = "text/xml";
request.Method = method;
request.keepalive=false;
request.ContentLength = xmlRequestBody.Length;
ServicePointManager.Expect100Continue = false;
//var objContent = HttpContentExtensions.CreateDataContract(requestBody);
if (method == "POST" && xmlRequestBody != null)
byte[] requestBodyBytes = ASCIIEncoding.UTF8.GetBytes(xmlRequestBody.ToString());
request.ContentLength = requestBodyBytes.Length;
using (Stream postStream = request.GetRequestStream())
postStream.Write(requestBodyBytes, 0, requestBodyBytes.Length);
if (request != null)
request.Credentials = new NetworkCredential("Username", "password");
//request.ProtocolVersion = HttpVersion.Version11;
var response = request.GetResponse() as HttpWebResponse;
if (response.StatusCode == HttpStatusCode.OK)
Stream responseStream = response.GetResponseStream();
if (responseStream != null)
var reader = new StreamReader(responseStream);
responseMessage = reader.ReadToEnd();
else
responseMessage = response.StatusDescription;
return responseMessage;
Could you please help what could be the reason.Any firewall issue or any serviced related issue.Kidly suggest.

Hi,
I have created the windows application using REST Service and tested the application on
windows 7 64 bit Ultimate edition but I'm getting the same error "The
operation timed out" attached the screen shot for your reference.
http://www.screencast.com/t/YeIJxl383a
I developed the application on Windows 7 Ultimate 64 bit version it is working on my machine. while the executing exe on another windows 7 64 bit Ultimate
edition which is on the virutal machine Im getting the error.
There is no visual studio installed on the Virtual machine , i have installed the Dot Net frame work 4.0 client profile on the virtual machine.
Could you please suggest is there any issues related to opearating system or related to framework.
Kindly help with some suggestions.

Windows XP Pro (32-bit) and Vista Ultimate (64-bit) on the same Mac Pro HD?

Has anyone been able to install both Windows XP Pro (32-bit) and Windows Vista Ultimate (64-bit) on the same dedicated Windows hard drive? I have four HD in my Mac Pro, and one of them is dedicated for Windows (and bootable via Boot Camp). I found the following technical articles about installing Windows XP & Vista on the same hard drive (using two separate partitions) using a VMWare machine as the test system:
http://apcmag.com/howto_dual_boot_vista_and_xp_with_vista_installed_first__the_stepbystepguide.htm
http://apcmag.com/howto_dualboot_vista_with_xp__stepbystep_guide_withscreenshots.htm
Has anyone successfully installed Windows XP (32-bit) and Vista 64-bit) on the same NTFS partition?
I already have Windows XP Pro (32-bit) SP3 installed on my single NTFS hard drive. I am looking for the best way to add the Vista 64-bit installation on the same hard drive.
Any thoughts and advise are appreciated.

Windows has its own list of boot OSs, and default, from msconfig. It will sit and wait for xx-seconds on startup in Windows if you want to boot from an alternate.
As to whether Apple's OS Switcher (aka startup disk bootcamp control panel or tray icon) sees both, I had Windows Home Premium and Ultimate 64, and pretty sure OS X saw both. That was pre-Leopard and before there were 64-bit Apple drivers.
I can't think of any scenerio of wanting to mix 32-bit and 64-bit on the same paritition, you realize you can't install the one over the other and must do a clean install.
When I added a partition out of main partition (I wanted to put search index and page file on their own partition) those partitions aren't seen - are hidden - to Leopard.

When I try to log onto Icloud in Windows 7 64-bit using my Apple ID it says my Apple ID is valid but not an Icloud account. I can't go anywhere with Icloud after that.

When I try to log onto Icloud in Windows 7 64-bit using my Apple ID it says my Apple ID is valid but not an Icloud account. I can't go anywhere with Icloud after that.

Welcome to the Apple community.
These types of messages often indicate a problem with the devices serial number, have you had your phone repaired at any stage or did you buy it second-hand.

Is HP Smart Web Printing compatible with Windows 7 Ultimate 32 bit and Internet Explorer 8 and 9?

Is HP Smart Web Printing compatible with Windows 7 Ultimate 32 bit and Internet Explorer 8 and 9?

HP Smart Web Printing has been replaced with HP Smart Printing. It does support Windows 7 and IE 6 to IE9. See this page for information.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Adobe Photoshop CS3 Extended freezes on startup under Windows 7 Ultimate 64-bit - No splash screen

I installed my licensed copy of Adobe Photoshop CS3 Extended today as part of my install a bunch of software after a reinstall of Windows (due to viruses). I did a completely fresh install of Windows 7 Ultimate 64-bit. I've used Photoshop CS3 Extended for quite a while now so I know what to expect on startup but it was previously installed under Windows XP Professional (32-bit). Figured I would give Windows 7 a chance this time around.
Google searches aren't turning up anything. When I attempt to start the application, I get a window with the title "Adobe Photoshop CS3" (no "Extended" - I seem to recall the title changes later) and the toolbar appears. However, no splash screen appears and no Product Activation wizard appears - the application simply freezes on an empty frame and a toolbar. I've tried running Photoshop as Administrator (right-click, "Run As Administrator"), but nothing changed there. I tried uninstalling and reinstalling. I tried upgrading to CS3 10.0.1. Nothing works. The application simply freezes before it gets anywhere.
I tried calling Adobe Support since this technically falls under installation issues but their phone support systems are down today. Go figure.
Edit: I hooked into Photoshop with the Visual Studio debugger and every single thread is executing some variation of WaitForSingleObject() or WaitForMultipleObjects(). The main thread is "executing" somewhere in AdobeLM_libFNP.dll (at address 09619d81 - if I had debugging symbols for CS3, I could provide a function). There are nine threads "running" at the point the freeze occurs - but all of them are technically suspended due to the functions they are executing - and one thread is in a suspended state.

Log Name:      Application
Source:        Application Hang
Date:          7/17/2010 6:16:25 PM
Event ID:      1002
Task Category: (101)
Level:         Error
Keywords:      Classic
User:          N/A
Description:
The program Photoshop.exe version 10.0.1.0 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: d0c
Start Time: 01cb2616be79e36f
Termination Time: 2
Application Path: C:\Program Files (x86)\Adobe\Adobe Photoshop CS3\Photoshop.exe
Report Id: 06f5fbff-920a-11df-9d69-001fd023417e
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Application Hang" />
    <EventID Qualifiers="0">1002</EventID>
    <Level>2</Level>
    <Task>101</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2010-07-18T01:16:25.000000000Z" />
    <EventRecordID>1615</EventRecordID>
    <Channel>Application</Channel>
    <Security />
</System>
<EventData>
    <Data>Photoshop.exe</Data>
    <Data>10.0.1.0</Data>
    <Data>d0c</Data>
    <Data>01cb2616be79e36f</Data>
    <Data>2</Data>
    <Data>C:\Program Files (x86)\Adobe\Adobe Photoshop CS3\Photoshop.exe</Data>
    <Data>06f5fbff-920a-11df-9d69-001fd023417e</Data>
    <Binary>430072006F00730073002D0074006800720065006100640000000000</Binary>
</EventData>
</Event>
And, according to the Event Viewer, the "Binary" data translates to a zero-terminated Unicode string of "Cross-thread".
My Visual Studio analysis was far more informative. All threads are hung inside of WaitForSingleObject() and WaitForMultipleObjects() calls and the DLL in question appears to be FlexNet-related. I did forget to mention that I also even manually started the FlexNet service in case, for some strange reason, Photoshop was waiting for it to start. That also did not work.
(And there is nothing in the Action Center control panel either despite the message saying there might be more information there.)
Edit: The timestamp above might be a little odd-looking. I didn't originally see anything in Event Viewer until I clicked the first button to send an Error Report. Mostly I just skipped that part of killing a process.

Itunes 10 Hangs When Started On Windows 7 Ultimate 64 bit - Sp1 Beta 178

Hi
Itunes 10 hangs when started on Windows 7 Ultimate 64 bit - Sp1 Beta 178
I have tried following things :
-Scanned for Virus + SpyWare
-Scanned for Corrupted System Files
-Scanned for Errors in registry
-Cleaned up items that startup with windows
-Installed latest Ati Catalyst 10.8 Drivers
-Checked settings in Itunes Version 10
My Mobile Model :
Apple Iphone 3gs 16 Gb
My Hardware and software :
HP Pavilion m9660sc PC
Intel Core I7 980X 3.33 Ghz
DDR3 PC2-8500 6 Gb Memory
HDD WDC WD10EADS-65L5B1
DVD-RW TSSTcorp TS-H653Z
LG L225WT Size 22 Screen
AMD Radeon HD 4850 1 Ghz Memory
Mainboard Pegatron Intel X58 Express
Windows 7 Ultimate 64 bit
Windows 7 Service Pack 1 Beta 178
Adobe Reader 9.3.4 - Norwegian
Spotify Version 0.4.7
Microsoft Security Essentials 2.0 Beta
Personal Ancestral File 5
Java(TM) 6 Update Version 21
Google Sketchup Pro 7.1
Google Chrome Version 6.0.472.53
Tales Of Monkey Island Version 2.0.0.0
Kai Anders Wold - [email protected]

Here is the latest update :
Removing Microsoft Security Essentials 2.0 Beta fixed the itunes 10 hangs.
Kai Anders Wold - [email protected]

Validity - icrosoft Windows 7 Ultimate (64-bit) не работает на hp elitebook 2740p

Similar Messages

Maybe you are looking for