Validity index in scheduling agreements
Hi everybody,
For contracts it is possible to call up a list with VA45 without entering a sold-to party, material or purchase order number. This is possible, because the validity index was activated.
We tried the same for VA35, but it still doesn't work. We still get the error: "Enter partner, material or purchase order number."
Is it possible to call up VA35 without this information? And if so, how?
Hi,
It is not possible to execute VA35 with giving one of sold-to-party, material or po no. But instead you can use VA35N if you version is equal or higer than ECC 5.0
Similar Messages
-
Change in validity period of Scheduling agreement
Dear all,
I extended validity period of existing Scheduling agreement,
But In MD04 it is not creating Schedule lines.
Regards,
Nitin Patil.hi,
you shd also check the validity period of the source list maintained for this schedule agreement..
Regards
Priyanka.P -
Schedule Lines generated for expired Scheduling agreements
Hi All,
We are facing problems in Scheduling agreements.
Schedule lines are getting generated for those agreements whose validity has expired(i.e Validity in Past).
Is there any check to restrict those Scheduling Agreements??
Please Help.
Regards,
Ritesh.from OSS note 914607 - FAQ: Validity and status of scheduling agreements
1. Question: When I process scheduling agreements without delivery schedules, I have the option to specify the validity of the scheduling agreement: "Valid" and "Valid to". What role does the validity play when the scheduling agreement is processed?
Response: In the case of scheduling agreements without delivery schedules, the system checks the validity of the scheduling agreement if you create a new schedule line or change an existing schedule line. If the schedule line date is outside the validity interval, a warning message is issued. You can then decide whether or not to create the schedule line or whether to adjust the validity of the scheduling agreement. No error message is issued.
2. Question: What role does the validity play in the case of scheduling agreements with delivery schedules?
Response: The function is similar to scheduling agreements without delivery schedules. The only difference is that the entry of the validity is optional (unlike scheduling agreements without releases) and this is not checked by the system. If the validity is missing, the system does note issue a warning message. If you specify the validity, the system behaves in the same way as for scheduling agreements without releases. -
Update price condition in scheduling agreement (ME32L)
Hi,
I have to update scheduling agrrement (ME32L).
The input data that i would like to update are price amount, validity start date and valdity end date.
Is there any function or bapi which can be used to update.
Any help in this would be highly appreciated.
Thanks,
Mandeephi
did you update the conditions and validity period of scheduling agreement? If yes then plz send me the details of parameters
ITEM_COND_VALIDITY =
ITEM_COND_VALIDITYX =
ITEM_CONDITION =
ITEM_CONDITIONX =
I am also facing the same issue.
waiting for your reply. -
Doubt regarding Schedule agreement
Dear Experts,
1. I heard once we prepare a Schedule agreement(say mat1 of 1000 quanity),then it is supplied over a period of time.But where do we specify that i want the mat in scheduling agreement to be supplied on jan1st 200 qty and feb1st 500 qty.
2. Suppose in the scheduling agreement, mat1 net price is 20 and agreement id for 2 years and after 1 year market prices rise very high and the mat1 net price is 40.Then how do we handle this kind of situation.
Pls Reply.
Kind Regards
SajidHi,
After creation of Schedule agreement for the delivery maintain the delievy schedule in ME38 for the required qty & Delivery date
for the price part in the scheduling agreement it is agreed price for the period of validity date in Scheduling agreement
Thanks & Regards
Rajesh. -
ME33L transaction : Scheduled Agreements
Hello,
1. In the ME33L transaction when you enter the scheduled agreement number you get the items of that particular agreement.If you now select the item and click on ITEM POSITION (shift+f6) the <b><u>validity periods</u></b> will be displayed for that particular item.
2. Now if u go to the menubar and select item->price simulation you will get the net value of that item.
3. Now i want a function module which will give me the validity periods when i pass the agreement data.
4. One more function module is required to get the price for this validity period.
Regards,
Sandeephello Sandeep Kusuma
Validity periods for Scheduling Agreements find you in table A016. When u have our record from table EKPO read A016 with the keys a016-evrtn = ekpo-evrtn and a016-evrtp = ekpo-evrtp.
The price for actual validity period found you in table ekpo.
Regards: y0sh1 -
Restriction of Validity start date in Scheduling agreement
Hi,
I am not able to convert the message 06 170( Start of validity period is in the past) in error message , when i am going to define attributes of system messages in purchasing and converting this message into error , system still does not give error message when i am selecting back validity start date in the header of Scheduling agreement (me32l)
What can be the possible reason.
Regards
SachinHi,
I believe the message 06-170 is hard-coded in Include "MM06EFRP_EKKO-KDATE" in the Program SAPMM06E
Laufzeitbeginn in der Vergangenheit -
IF ekko-kdatb < sy-datlo.
MESSAGE w170 INTO gl_dummy.
mmpur_message 'W' '06' '170' '' '' '' ''.
Please consul your ABAP Team on this to change it to Error.
But SAP does not recommend changing standard Programs, so please discuss this and see that its really required and will not have any effects to your business process, because there may be instances wherein you might require to create scheduling agreements with a past validity date sometime in future based on business requirement.
Regards
Chandra Shekhar -
Scheduling Agreement: validity variation date on schedule dates
Hello everybody
I have a problem and I appreciate your advice .
There is an agreement A which validity date is from 01.01.2007 to 31.12.2007.
And an agreement "B" with validity date from 01.01.2008 to 31.12.2009
After the MRP has been run, It creates the Delivery Schedule based on agreement "A" . But in a specific item, it was created two delivery date which are out of the validity date; those were 07.01.2008, and 12.01.2008
The question is why did the system create deliveries schedule out of the validity date base on agreement A and not based on agreement B? I mean,
Why did the system create this Scheduling delivery date out of the range of validity of the Agreement?
And, In the case that it had taken the validity date from Agreement "B" why did it put it on agreement "A"?
Could you give me any tip or suggestion where I need to verify or check in order to find out the reason why this happened?
I already verify the agreements, the source list and they seem to be ok.
Thanks in advanceHi Adrianda,
The creation of schedule lines through MRP depends upon the Agreement( no "A" or "B" in your case) and the validity period,and the period for which the MRP is run the system will create the SL according to the period for which the MRP has run,as per my knowledge there are no other place you can check,so double check the source list. -
Dear SAP Gurus,
I have a requirement where delivery should happen only within the validity period.
I am trying to map the same through Scheduling agreement, where i can enter the From and To date.
When i am entering the schedule line manually which falls after the validity end date, system is throwing the warning message V1448.
I tried to make this message as ERROR in OBMSG/OBA5.
Still the message is WARNING.
Please advise on how this message can be made ERROR.
Is there any other way to map this process other than by using scheduling agreement ( delivery should happen within the validity period only) ?
Thanks & Regards,
Hegalmessage V1448.
The above message is being popped up from Include / Program MV45AF0D_DATUM_PRUEFEN_GUELTIG and I dont think, it can seen in the two TCodes indicated by you.
Changing from Warning to Error is definitely not recommended. You can however, definitely control this through your existing routine or with user exit.
thanks
G. Lakshmipathi -
Validity end date tab is suppressed in scheduling agreement
Hi ,
In scheduling agreement , Validity end date tab is suppressed ,
There is no layout is assigned to the doc type & standart transaction varient is acitve , but while doing ME31L above field is not coming ( it is in suppressed / hide mode )
Please let me how to get that validity date tab in scheduling agreement.
Thanks,
PradeepHi,
Go to SPRO > IMG > MM > Purchasing > Purchase Order > Define Screen Layout > NBF > Administrative data, header > make the fiels Validity Period field optional / Required.
Hope this will help you.
Regards,
Manish Jain -
Unable to create new price validity in Scheduling agreement
Dear Experts
We are SAP 4.7 version.
We have 4 companies and 17 plants in same client server.We are facing problem in a particular company having two plants not able to change price in scheduling agreement with validity period.But in other company code allowing to create new price validity period.
Any configuration missing out please help us to resolve the issue.
Most urgent
SSHello Suresh,
There are two possibilities
1. Missing authorization :Check if you have the same authorization profile for maintaining data in all company code/plant/purchasing organizaiton.
2. Release streatagy: Check if you have activated release procedure in such a way that once it is release it will not allow any changes in scheduling agreement.
Hope this helps.
Regards
Arif Mansuri -
GRN vs Schedule Agreement validity Date
Dear All,
We got very severe issue, we have created the Scheduling Agreements(document type -LP) between the two plants (Cross Company Codes) with the vendor code created under the Account Group : 0007.
During the creation of the Scheduling Agreements , we have not assigned the Plant code in Vendor Master (In Purchasing organisation data-> Extras-> plant Assignment).
So the shipping data did not get determined per material in scheduling agreement and scheduling agreements created as the normal Scheduling agreements (NOT as Stock transfer scheduling agreements)
and plants started doing the transaction(In Production server) as Normal Purchase Sale (by creating sale order and GRN via Scheduling Agreement) .
But now , it is required to change the process via Sale -Purchase to Stock Transfer , so we have changed the Vendor master and assign the Plant to the vendors.
But the transaction has been going on already created scheduling agreements. So how Delete/Close the existing scheduling agreements. and we need to create new scheduling agreements(Stock transfer scheduling agreements).
I have tried out with Validity period (by shortning the Validity Period) , so that existing SA should NOT be invalid for GRN, but GRN date has no control with Validity period of SA.
Please suggest how to go about it.
Regards
NitiinHi,
Try This
Do not maintain Delievry Schedule in Me38 or you can try with setting Block vendor in Source List or you can change validity period in source list.
Regards,
Vikas -
Condition values and validity periods of a Scheduling agreement .
Dear Friends,
I have one querry .Where does (in Database table) , the condition values and validity periods of a Scheduling agreement stored .
Thanks and regards in advance.
Vijay.
Edited by: vij kot on Sep 9, 2008 12:09 PMHi,
Refer Tables
KONH - Condition Header
KONP - Condition Item
KONV - Conditions (Transaction Data) -
ME38 Scheduling agreement won't create a delivery due index for stock trans
Hi,
we've had a scheduling agreement that has been working fine since 2005 that has suddenly stopped producing a delivery due index for stock transfer record ( Table VETVG ).
I cannot see any changes to the scheduling agreement which looks okay to me. I'm not sure what else to check.
Any ideas appreciated
ThanksHi Simon,
This post is related to MM, so kindly post this issue in MM forum. Those will be the right guys to solve this issue..
Cheers..
Regards
MBS -
Scheduling agreement does not get updated (though in valid period)
Hi,
Once I change the setting of document type LPA from Time dependent conditiopns to Time independent conditions,
how can I convert existing scheduling agreements that have been already created to time independent settings?
Is it posible?
Regards,
AjinkyaIf the agreement is open without any transaction, you can change the same using Carry out new pricing (B).
Logically speaking agreement should be made in consent with the vendor agreed terms. It should not be changed in the mean course.
Maybe you are looking for
-
I have an Ipod that is about a year old which was connected to an old computer that has crashed. I just downloaded itunes on a new computer, hoping to download my music from my ipod, but it won't let me. Any ideas how to sync them?
-
My macbookpro is not opening pdf sites from safari or firefox, it goes to the address but just gives me a black screen. I can however open a pdf file that I have saved on my HD, it opens on preview. any thoughts? osx 10.6.8
-
How do I erase my hard drive for resale?
I'm trying to erase from the disk utility and it won't allow me because it won't highlight the erase button
-
DBA Reports large number of inactive sessions with 11.1.1.1
All, We have installed System 11.1.1.1 on some 32 bit windows test machines running Windows Server 2003. Everything seems to be working fine, but recently the DBA is reporting that there are a large number of inactive sessions throwing alarms that we
-
Hi, I have export of a table with name "abc". I need to import the table "abc" into another database but with a different name like "abc_temp". Is it possible? I cannot import as "abc" and rename as "abc_temp" Thanks