Validity & Number range for permits

Hi,
Can we map validity for permits in SAP PM permit standard functionality. I was advised for WCM however that seems a complex system as per our requirement.
Validity of permits, auto permit number assignment while assigning permit is the requirement.
Any inputs?
Regards

Hope you have gone through that blog.
Permits are approvals which will be created as one time master data & the same can be used for many orders.
So, it doesn't have any number range. Also, this master data is very limited.
You can't set the validity date range for permit, I feel.
Instead, in IPMD, you can sen Usage Block that will avoid the usage of that specific permit further.
Suggest you to read some documents & links on permits to understand the concept.
You can get the links in google.

Similar Messages

Number range for document types

Hi everyone,
I want to have anumber range 3200000000----3299999999 for my PO document type ZEOH which is a copy of NB. The number range for NB starts with 45. Now when i am inserting the 32 series & than assigning to the doc type ZEOH system is giving error " insert valid intrernal number range". Please suggest what internal number range can i use or how to use the 32 series.
Thanks

Dear John,
Check if you have maintained proper entries in:
ItmInt - Item Number Interval
NoRgeInt - Number Range Internal
You should be able to save without any errors.
Also, are you able to see the number range in the F4 help for ItmInt.
Regards,
Naveen.

MIRO and MIGO number range for new financial year

All SAP Gurus,
We want same number range to be continued for MIGO and MIRO documents.
Is it needed to create the number range for MIGO and MIRO for new financial year or same number range will be continued automatiaclly?
Regards,

hi,
The number range to be applied for the MIGO And MIRO documents depends on the YEAR which you have feed while maintaining the number range...If you want a new number range for next year, then you can maintain it from above transactions...Or if you wanna continue wid the same then can use the same number range as well...
As suggested maintain the number range get it applied, but remember if you maintain the number range as 2010 then that number range will be valid for the given year only...but if you give the number range 9999 then it will be valid upto 9999 year...
Hope it helps..
Regards
Priyanka.P

External number range for billing document (Invoices)

Hi guys,
I have a requirement from one of client to implement external number range for billing documents.
I can only see a provision for internal number range in customising for Billing document type.
Please can you assist me with detailson how to set up external number range for billing documents (Invoices).
Thanks, Felix

Hi Felix
I think the similar requirement is in Venezuela also.
So pl. check the SAP Note 849438 . As per the note :-
The solution is delivered in the indicated support packages. In case you can not implement the correspondin support package for your release immediately, please follow the procedure described below:
1. In the Data Dictionary Editor (transaction SE11) please open the definition of domain J_1AOFFNREL, go to the fixed values and add value 'P' with description 'Number Assingment using Prenumbered Forms' in a position so that the possible values remain sorted alphabetically.
2. In the Message Editor (transaction SE91) please go to message class ICC_CN and add the new message 837 with text '&1: Official doc. numbering is not available for delivery documents!'.
3. If you are implementing the note in release 4.6C, please create the following function modules:
o     OFF_NUMBER_LOCAL_ASSIGN_VE in function group FIN2, and then copy the interface (all parameters and exceptions) of the function module OFF_NUMBER_LOCAL_ASSIGN_TW
o     OFF_NUMBER_LOCAL_NUMBERING_VE in function group FIN2, and then copy the interface (all parameters and exceptions) of the function module OFF_NUMBER_LOCAL_NUMBERING_TW
o     XBLNR_BUILD_AND_SPLIT_VE in function group IDSDCNUTIL, and then copy the interface (all parameters and exceptions) of the function module XBLNR_BUILD_AND_SPLIT_PECL
4. Implement the source code corrections as shown below.
The following customizing actions should be also executed when the solution by delivered by the corresponding support package. If you applied the solution manually, then please use the IMG activities listed in the section Cross-Application Components -> General Application Functions -> Cross-Application Document Numbering -> Taiwan as a reference. After the installation of the corresponding support package the customizing node for Venezuela can be used.
1. Enable the use of business place for country Venezuela as described in the OSS Note 726537.
2. Define the necessary document classes and configure the document types you would like to get an official document number as relevant for official document numbering in the desired mode. Please check the OSS Note 571376 for some explanations about the meaning of the different settings.
3. Define the necessary number ranges and intervals and assign them to the combination of company code, business place, document class and validity period. If you use the customizing activity for Taiwan, then please leave the prefix field empty.
Regards
Amitesh

OM Number Ranges for Job(C)

Hi All,
I want to create a separate Number Range for Job Code.
The following what I tried,
First i created the Subgroup 01C-Plan Version,Object Type and created the Interval from 1 to 50002896 with internal number range.
Now for the second i need the Interval from 50002900 to 50002950 for the Job Code,so I created the second interval with same number range and EXT check box is ticked.
But whenever I enter the Number in the 50002900 in the PP01,
Plan Version-Current Plan
Object Type-Job
Object ID-50002900
Selected the Object and clicked on the Create the Following Error Appeared
"The number indicated is not in any valid external Interval"
Please Help me out

Hi,
Please try this (apologize if repeating what you have done)
If you want to change the number ranges of the organisation objects,you will have to change the inputs in Table T77IV.
form the first column subgroup pick "c" and click on the number range maintenance. The number ranges generally are internal but if you were to mark them as external am not sure if that can happen.
there are few exits but one has to be very careful while executing
Individual Number Assignment
Warning : You should carry out this activity only if the following two conditions are fulfilled:
if
The SAP Standard Processes do not meet your requirements.
You can program in ABAP competently.
In this step, you can implement the following User Exits of the enhancement RHIV001:
EXIT_SAPLRHIN_001: Check number ranges for integration
EXIT_SAPLRHIV_001: Internal number assignment
EXIT_SAPLRHIV_002: Check external number assignment
EXIT_SAPLRHIV_003: Check whether internal number assignment is available
Hope this helps
All the best to you
Regards
RR

Number range for rental object

rental object type rs and ps use the same number range ?Can I distribute the diffierent number range for the different type?

Dear Pan,
PS/RS/RU are called RO in RE-FX and use the same number range, however you can use BAdi to assign the required number to PS or RS.
RECACUST--> Master Data --> Usage View --> Rental Object--> Implement Enhancements (BAdI) --> Number Assignment, Validation, Substitution.
Kind regards,
Kishore

Urgent : Unable to maintain the Number ranges for Excise Groups

Hi CIN experts............
In Development server I created 3 excise Groups (E2,E3 and E4), the same I was transported to Production.
J_1IRG23A1, J_1IRG23A2 object number ranges are Excise Group specific.
When I go to Tools - Number Ranges to maintain number range for J_1IRG23A1, J_1IRG23A2 objects I didn't find these excise groups.
Im able to see these Excise groups in Tools - Number ranges in Development server, but not in Production.
Can any one guide me something to resolving the issue ?
regards
Durga Ram

Hello Nagaraju,
Can you please tell me the customozing path for maintaining the number ranges for PM log entries.
I require to mention customizing path in my document.
Puneet

How to find next number range for project definition in tcode CJ20N

Hai Experts,
Please help me 'How to find next number range for project definition in tcode "CJ20N". I was trying in function module NUMBER_GET_NEXT. Is it right function module? If its right what input i need to give for this tcode and for the field project definition?
Note: I searched in forum before posting, but couldn't find the solution.
Thanks
Regards,
Prabu S.

Hi,
For project defination internal number is assigned by system.
When you saves's project then system allocate one number to project defination, you can view it,
SE11 >>> table PROJ >> Click on contents >>> execute,
here you will get your project defination & number is assigned to project defination.
kapil

Number ranges for material document (migo) and inventory documents

Hi Gurus,
We need a different number ranges for goods receipt documents and inventory documents because we have different company merged in to one box.Can any body tell me on what basis we differenciate the number ranges how to configure it.
If we take PO, we have different doc types and we assign number ranges to those documents. in case of Miro , it is the single transaction code used by different companies and how to give different number ranges.
Regards,
Sri........

Hi,
I think number ranges of inventory documents are on client level not on company code wise . because even though your creating new document and assigned different number ranges for the documents but these while assigning ranges to T codes (MIGO or MIRO) you dont have option like company codes ( tcode OMBA) so number ranges for inventory documents are at client level not at company code level.

Excise invoice number range for Depot

Hi All,
Pls guide me to assgin excise invoice number range for Depot.
My client asking me to assgin domestic and export excise number range for Depot.
pls clarrify:
What are the purposes of the number range objects J_1IEXCLOC and J_1IEXCINV? In which conditions
1. either of the two, or 2. both the objects should be used?
Thanks,
Muru..

Dear Murugan
Please search in forum you can have ready made answers available.
System will always assigns one number for excise(where user can use Official document number) also an internal number for statistical purpose.(internal number for excise)
You can see all these numbers in tables J_1IEXCHDR/J_1IEXCDTL.
Just enter one excise Invoice number in the above tables & compare these with the objects J_1IEXCLOC/J_1IEXCINV...you will get more clarity
Hope this helps.
Phanikumar

Sales /Outgoing Excise Invoice number Range for J1IIN

Dear Gurus,
We are doing STO from excisable plant 1000 to plant 1100. We created a PO with document type UB ( STO) and created delivery with reference to PO and created billing document ( delivery challan). Against billing document number we created sales excise invoice in J1IIN for financial year starting from 1st April 2010. In J1I9 we have maintained number range for 2010 financial year in object J_1IEXCLOC for respective series group s1.Still when the outgoing excise created, the system continued last financial years number range. In entire flow from PO till MIGO and billing document and creation of excise invoice the input date is 6th of April i.e. current financial year. This is our first sales outgoing excise invoice creation in new financial year for which number range is maintained properly.
My question is why system took last financial years number range even though the date in all the documents is falling in new financial year.
Will appreciate the answer.
Thanx in advance
Regards
Nilesh

RESOLVED

Excise Number Range for Object J_1IEXCLOC

Dear All ,
I am having one issue regarding excise number range for object J_1IEXCLOC and sales group : 41 Domestic. i have already maintained number range for 2009 is 0000000001 to 0000000300. Now the range is exceed and the new excise invoice is created with number 0000000001. Now i am confused if i will maintain range upto 0000000500 for 2009 then what will be the new invoice number, whether it will be 0000000002 or 0000000301.
Pls. Give me some suggestion, What should i do now for the number range to be in continuation.
Regards,
Swapnil Vaidya

>
swapnil vaidya wrote:
> Dear All ,
>
> I am having one issue regarding excise number range for object J_1IEXCLOC and sales group : 41 Domestic. i have already maintained number range for 2009 is 0000000001 to 0000000300. Now the range is exceed and the new excise invoice is created with number 0000000001. Now i am confused if i will maintain range upto 0000000500 for 2009 then what will be the new invoice number, whether it will be 0000000002 or 0000000301.
>
> Pls. Give me some suggestion, What should i do now for the number range to be in continuation.
>
> Regards,
>
> Swapnil Vaidya
It will be 2 and not 301. This is a flaw with CIN. All transactions take place by means of internal numbers and are stored in CIN transaction tables. Hence when the range gets exhausted, the number gets reset to the beginning, yet there is no error because internal number, which is the primary key, is different.
To solve your problem. Go to SNRO and provide the object J_1IEXCLOC and click on status. Change the status to 300 and continue with your transaction.
Regards,
Aroop
PS: Your question is more relevant for SD than MM.

Excise number range for 2009

Dear All,
I work for Indian client...
I have maintained Number ranges for excise invoice as follows...
NO-YEAR-FROM NUMBER-TO NUMBER-CURRENT NUMBER
01---200800000000010000004999--64
I want the Number to be continued for 2009 also.
For eg, if the last number in 2008 is 64.Then next invoice in 2009 should be 65.
Now my doubt is, For 2009, what should i do ?
Will system cosider the same range for 2009 or Should i maintain no range for 2009 ?
Regadrs

Hi
System will not consider the same number range for 2009. You have to maintain this for 2009 too.
If you want to continue the same number range then you have to maintain it as below. This is only required only if you want the number to be continued in the 2009. Else you can set the status as 0 instead of 64.
01---200900000000010000004999--64
Also the number range from 1 to 64 for will not be reflected in year 2009. It will be reflected in year 2008.
Regards
MBS

SAME NUMBER RANGES FOR DOMESTIC AND EXPORT INVOICE

Dear All,
We have maintained Two objects separately for Exports and Domastic sales invoices which is inturn giving two different number ranges.
But our client needs same number to be continued for both.
For eg: 000001 . 000002 and 000003 is the number range for domastic invoices for Export invoice 00004 should come. now as we have maintained different objects Export invoice is starting from 00001.
Our client does'nt want to maintain separate number ranges for Exports and Domastic, same number range should be there for both which should follow continues numbers.
Please suggest me on this at the earliest.
Regards,
Jay

Dear Jay
Assuming that you are asking about Excise Invoice number ranges, please do maintain Numbers for the Object: J_1IEXCLOC
When you go into J1IIN, you will need to mark the checkbox: Use Local Number. If at the first time (in the case of Deemed and Regular Exports), you do not see this checkbox, click on the 'Calculator' icon and hit the 'Back' icon. Mark the checkbox and save your Excise Invoice. This number will be a continuation of your Domestic Excise Invoice.
thanks
G. Lakshmipathi

Same number range for two different series groups?

Dear all,
There are two scenarios
1.Normal export under bond case, series group is 20 and number range maintained,running number is 300016
2.Another scenario,where ARE1 document generation for Deemed exp customer(already customised) , series group is 30.
But, client requirement is , for this second scenario also, system should pickup running number range of series group 20(under bond case) as per excise legal requirement
Ie running number is for series group 20 is 300016
For the above deemed exp case (second scenario)it should pickup 300017
And again when they do under bond case(first scenario), it should pick up 300018 like that
Is it possible to maintain the same number range for two different series groups(20 and 30)?
Even if you maintain the same number range for 30, as per running number range of 20
Will the system update simultaneously the same number range for 20 and 30 series groups?
Please suggest the way.

With two different series groups, it is not possible to have the same number range. Even if you maintain it, they will be treated independently.
Normally, you should not use different series groups if the same number range has to be used. In fact, the concept of series group has been developed to ensure that number ranges can be maintained separately.
Regards,
Aroop

Validity & Number range for permits

Similar Messages

Maybe you are looking for