Validity of SAP note 1172948 ??
Hi All,
We have SAP Solution Manager EHP1 SP24 installed and as part of initial configuration, I am trying to implement this note but in snote it is coming as SAP note cannot be implemented.
If I check this note then it says correction instruction delivered in ST400- SAPKITL429. But I am on SAPKITL435. So, shall I assume that SAP has now included this note in support packages ?
Thanks
Sunny
Hello,
That Note is obsolete for your SP level.
You want SAP Note 1405878 - SAP Solution Manager: Basic functions: SP22 to SP26
Note: version is important....most current is 26 as of this writing.
Regards,
Paul
Similar Messages
-
Validation of SAP Note correction
Hi All,
I have a set of note corrections which are triggered when doing an upgrade of SAP 4.7 to ECC 6.0.
In the Note corrections it gave instructions about the code corrections in the Note.
In this description it gave list of Valid releases . Do we need to check the version of particular module in the source SAP system( SAP 4.7 ( if it exists in the list then we can go a head and apply the note to the upgrade system to get the effect in Target system (ECC 6.0))
Valid Releases
SAP R/3 PlugIn for SAP APO, SAP BBP, SAP BW, SAP CRM
2003_1_31I
2003_1_470
2003_1_46C
2003_1_46B
2003_1_45B
2003_1_40B
2004_1_470
2004_1_46C
2004_1_46B
2004_1_45B
2004_1_40B
2004_1_31I
2004_1_500
Please let me know wether i can go a head and install all Sap note corrections which are encountered in upgrade or do i need to validate like this.
Please let me know the general pratice.
Cheers,
ReddyHi,
When you download a note through SNOTE the system determines whether the note is applicable to your system or not .
If applicable when you implement the note only those corrections that are meant for your system are applied the others are ignored , the system takes care of these.
Regards,
Sowmya. -
When I am applying the adjust to original functionality in the General
Structure tab in the Group and Process Areas for project ZGP_NHHR. I am
getting the bug No version for structure element.And when executing the
T-code /nSA_PROJECT_UPGRADE the error bug which I am getting log:
No version for structure element 10AC8B15D943FA48971B71619A17E195 from
ZHR_EUR
Error occurred at node 'IBM Toolset' and tab 'Development'
Debugging information
I implemented the attached note:
1276846 Corrections to versioning in Solution Directory
using transaction SNOTE into your system.
The Z reports mentioned in the note are available as attachments to the
note. Please download the attachments and create the reports manually
in transaction SE38.
(create reports: ZVERS_OBID_FIX_TEMP_PROJ_PLACE
Z_VERS_OBID_FIX_BPR_2_SOL
Z_VERS_OBID_FIX_FROM_SOL
Z_VERS_OBID_INCON_VERSION
in SE38 and upload the content of the sourcecode from the txt files of
the attachment of the note and activate the reports)
Afterwards please run all the four reports.
But still the Error persists please let us know how to solve this.
Regards
Akash GuptaHello Akash,
you might check the following SAP Notes:
[1172948|https://service.sap.com/sap/support/notes/1172948] SAP Solution Manager - Basic functions
[1317199|https://service.sap.com/sap/support/notes/1317199] Important Solman informations and notes for SP18 and SP19
[1278074|https://service.sap.com/sap/support/notes/1278074] Error message in project maintenance due to deleted solution
Best regards,
Andreas -
SAP Note 144253 For error Enter valid delivery plant in sales order
Hi all,
I am getting the error "Enter valid delivery plant" while creating the sales order . This is due to Customer and plant are same .
For that I got one SAP Note 144253.
If anyone implimented this SAP note Could you please share is there any impact of this note after implimenting.
Thanks
CMHi,
Go to bellow links,
http://help.sap.com/saphelp_nw04/helpdata/en/60/8def3981fe5d7de10000000a114084/content.htm
http://www.sap-basis-abap.com/bc/steps-to-install-sap-note.htm
Thanks,
Raviteja -
Hi experts,
I've read that SAP notes are changes to standard code which are to be included in the next release. I was approached by a team to implement a SAP note; upon checking the validity the note is only applicable to previous SAP versions. Our system is a more recent one. When I check the SAP note in SNOTE, it says "can be implemented". My question is, is this note applicable? Should I follow the validity section of the SAP note? Or can I implement this because it's status says so in SNOTE?
Thanks in advance.Hi Jack,
sometimes SAP notes are containing some wrong informations. For example if a SAP note is only valid for other releases, but contains a correction instruction for your release, which is valid for your support package level, then you can try to implement it. Many incorrect informations in SAP notes come from SAP version updates, when the note says, it is valid for release x SP level from a to b and correction instruction says, it is valid for release x SP level from c to d.
But please check carefully, that all manual activities can be done and all additionally required notes and their manual activities can also be implemented (or are obsolete).
If you get an installation error, please uninstall the note after installation (if this is possible).
There are many possible errors and issues that may occur:
Correction instruction is already partially implemented
You get activation errors, for some business functions are not active (Switch Framework). In this case you may be unable to uninstall the note without errors.
and many more
If you're thinking that the note will help you to solve an issue, please try to implement it. In case of error you should feel free to contact SAP support.
Regards,
Klaus -
Messagein OSS as "SAP Note does not contain valid correction instructions"
Hi all ,
Iam trying to implement the OSS Note 170334 in the SNOTE transaction. When I hit Implement, I get a message -"SAP Note does not contain valid correction instructions" .
Could any one help me what to do now. We are now using ECC 6.0.
Thanks in advance,
GuruHello,
The SAP note "170334" does not contain any correction instructions means no code changes to be implemented . You want to test whether the note can be installed in the customer system using the Note Assistant. This is not possible because the note does not contain any correction instructions.
The Note Assistant can only install notes that contain correction instructions. Correction instructions describe changes to the source text of ABAP programs, ABAP includes, function modules, method implementaitons, and screen flow logic.
This particular is just for information and you will see some 5-6 related notes in this note.
Also , whats important here is too implement/refer the long text of the message .
Hope this helps.
*Reward if helpful
Regards,
Sandeep -
Is the SAP note (old, 2001 year) valid?
Hi!
I am trying to create source system in BW to connect from BW-system to SAP source system. I can connect to SAP system but when I click on use (RFC connection) I get message "Error during insert in port table". I found SAP note with number 110849 but it is was released in 2001 year. I work with Netweaver 7.0. Can I use this note to correct error?
Thanks,
OlgaOlga,
There is another alternative solution here which does not require transaction SNOTE usage - go to SAP Service Marketplace, open the required SAP Note and check section "Affected Releases", where you will be able to find out information on software components' release versions which are affected. Just find out if the one which you use is in the list - if not, then the SAP Note is not applicable for your system. The second step in case the first one is passed and you found your release version in the list of affected releases is to verify Support Package level: ensure that Support Package which delivers the correction for this software component hasn't yet been implemented in your system (if it or higher Support Packages are implemented, then you should already have the correction applied in your system).
My regards,
Vadim -
SAP Note 1005901 related to MM
Hello friends,
Can anyone explain me the below sap note 1005901 (MM module , tcode :- MB5B). I am not able to understand perfectly...
16.08.2010 Page 1 of 4
SAP Note 1005901 - MB5B: Performance problems
Note Language: English Version: 3 Validity: Valid Since 05.12.2006
Summary
Symptom
o The user starts transaction MB5B, or the respective report
RM07MLBD, for a very large number of materials or for all materials
in a plant.
o The transaction terminates with the ABAP runtime error
DBIF_RSQL_INVALID_RSQL.
o The transaction runtime is very long and it terminates with the
ABAP runtime error TIME_OUT.
o During the runtime of transaction MB5B, goods movements are posted
in parallel:
- The results of transaction MB5B are incorrect.
- Each run of transaction MB5B returns different results for the
same combination of "material + plant".
Other terms
MB5B, RM07MLBD, runtime, performance, short dump
Reason and Prerequisites
The DBIF_RSQL_INVALID_RSQL runtime error may occur if you enter too many
individual material numbers in the selection screen for the database
selection.
The runtime is long because of the way report RM07MLBD works. It reads the
stocks and values from the material masters first, then the MM documents
and, in "Valuated Stock" mode, it then reads the respective FI documents.
If there are many MM and FI documents in the system, the runtimes can be
very long.
If goods movements are posted during the runtime of transaction MB5B for
materials that should also be processed by transaction MB5B, transaction
MB5B may return incorrect results.
Example: Transaction MB5B should process 100 materials with 10,000 MM
documents each. The system takes approximately 1 second to read the
material master data and it takes approximately 1 hour to read the MM and
FI documents. A goods movement for a material to be processed is posted
approximately 10 minutes after you start transaction MB5B. The stock for
this material before this posting has already been determined. The new MM
document is also read, however. The stock read before the posting is used
as the basis for calculating the stocks for the start and end date.
If you execute transaction MB5B during a time when no goods movements are
posted, these incorrect results do not occur.
Solution
The SAP standard release does not include a solution that allows you to
16.08.2010 Page 2 of 4
SAP Note 1005901 - MB5B: Performance problems
process mass data using transaction MB5B. The requirements for transaction
MB5B are very customer-specific. To allow for these customer-specific
requirements, we provide the following proposed implementation:
Implementation proposal:
o You should call transaction MB5B for only one "material + plant"
combination at a time.
o The list outputs for each of these runs are collected and at the
end of the processing they are prepared for a large list output.
You need three reports and one database table for this function. You can
store the lists in the INDX cluster table.
o Define work database table ZZ_MB5B with the following fields:
- Material number
- Plant
- Valuation area
- Key field for INDX cluster table
o The size category of the table should be based on the number of
entries in material valuation table MBEW.
Report ZZ_MB5B_PREPARE
In the first step, this report deletes all existing entries from the
ZZ_MB5B work table and the INDX cluster table from the last mass data
processing run of transaction MB5B.
o The ZZ_MB5B work table is filled in accordance with the selected
mode of transaction MB5B:
- Stock type mode = Valuated stock
- Include one entry in work table ZZ_MB5B for every "material +
valuation area" combination from table MBEW.
o Other modes:
- Include one entry in work table ZZ_MB5B for every "material +
plant" combination from table MARC
Furthermore, the new entries in work table ZZ_MB5B are assigned a unique
22-character string that later serves as a key term for cluster table INDX.
Report ZZ_MB5B_MONITOR
This report reads the entries sequentially in work table ZZ_MB5B. Depending
on the mode of transaction MB5B, a lock is executed as follows:
o Stock type mode = Valuated stock
16.08.2010 Page 3 of 4
SAP Note 1005901 - MB5B: Performance problems
- For every "material + valuation area" combination, the system
determines all "material + plant" combinations. All determined
"material + plant" combinations are locked.
o Other modes:
- Every "material + plant" combination is locked.
- The entries from the ZZ_MB5B work table can be processed as
follows only if they have been locked successfully.
- Start report RM07MLBD for the current "Material + plant"
combination, or "material + valuation area" combination,
depending on the required mode.
- The list created is stored with the generated key term in the
INDX cluster table.
- The current entry is deleted from the ZZ_MB5B work table.
- Database updates are executed with COMMIT WORK AND WAIT.
- The lock is released.
- The system reads the next entry in the ZZ_MB5B work table.
Application
- The lock ensures that no goods movements can be posted during
the runtime of the RM07MLBD report for the "material + Plant"
combination to be processed.
- You can start several instances of this report at the same
time. This method ensures that all "material + plant"
combinations can be processed at the same time.
- The system takes just a few seconds to process a "material +
Plant" combination so there is just minimum disruption to
production operation.
- This report is started until there are no more entries in the
ZZ_MB5B work table.
- If the report terminates or is interrupted, it can be started
again at any time.
Report ZZ_MB5B_PRINT
You can use this report when all combinations of "material + plant", or
"material + valuation area" from the ZZ_MB5B work table have been
processed. The report reads the saved lists from the INDX cluster table and
adds these individual lists to a complete list output.
Estimated implementation effort
16.08.2010 Page 4 of 4
SAP Note 1005901 - MB5B: Performance problems
An experienced ABAP programmer requires an estimated three to five days to
create the ZZ_MB5B work table and these three reports. You can find a
similar program as an example in Note 32236: MBMSSQUA.
If you need support during the implementation, contact your SAP consultant.
Header Data
Release Status: Released for Customer
Released on: 05.12.2006 16:14:11
Master Language: German
Priority: Recommendations/additional info
Category: Consulting
Primary Component: MM-IM-GF-REP IM Reporting (no LIS)
The Note is release-independent
Thank you.SAP suggests you to build a pre-calculated data table and a z-report to solve the problem of performance getting poor of transaction MB5B. They give suggestions to write programs that fill the new database table and a report to substitute MB5B transaction
First download and install in development or sandbox system the transport request of [Note 32236 - Incorrect stock qty or stock value in material master|https://service.sap.com/sap/support/notes/32236] and check the included reports which are very similar.
Regards,
Raymond -
Hi All have the SAP Notes for executing a equerry in background.
I am not able to analyses the Note. Can any one please help me on this. It is really urgent.
Following is the Note details.
*Note 537735* - SAP Query: save to file in the background
Note Language: English Version: 3 Validity: Valid from 06.07.2005
Summary
Symptom
You want to schedule an SAP Query for background processing and you want to
write the list to a file. You cannot use the save to file provided on the
query selection screen because this type of storage requires a connection
to a front end. However, this type of connection does not always exist
during background processing.
More Terms
Query, download, save, store, save to file, file, job, background job,
schedule, COD, MOD
Cause and Prerequisites
Solution
Use the SUE enhancement described in the online documentation: You can
create an ABA program in this enhancement, which is then used for writing
the output to a file on the application server using the ABAP commands
'OPEN DATASET ', 'TRANSFER' and 'CLOSE DATASET '.
Header Data
Release Status: Released for Customer
Released on: 13.07.2005 12:53:43
Priority: Recommendations/additional info
Category: Consulting
Main Component BC-RV-QU SAP Query
The note is not release-dependent.
Related Notes
Thanks and Regards,
Nimisha Deshpande.Hi again.
Remember 2 things:
1 - first, you have to go to tcode CMOD, create project Zproject and include there the ampliation. After that you have to activate the project.
2 - second, I think that exit will only be called in background, so I don't think it will stop in a break point.
To test it quickly, create a simple one line file in OS, with OPEN/CLOSE dataset, and then check the target directory.
Regards.
Valter Oliveira. -
User validity date is not refelcting in Childsystem
Hi Experts,
I have changed the validity of a user in CuA system . But the validity is not reflecting in child system. on checking SCUL I found the error as " User type 75 is not actiive". I didnot find any issues in distributing roles and profiles for this user in CUA.only for user valdity I am reciving this error. Please advice how this error can be rectified. In SCUM the distribution parameter is global for user valdity. I need to know the root cause for this error.
Thanks,
Sanjeev.SHi Sanjeev,
Why dont you identify user master data that has not been changed from the central system and distribute it again where necessary.
You can do all this from SCUL
Look at the following SAP notes :
632486
First of all check if that user is existing in the child system and is active or expired:
Some times the user might have been deleted in the backend system and you are tyring to change the validity date of the user only on the CUA system because he exists only in the CUA box.
I strongly think that the user record is manually deleted in the child system
Please try to perform this action for another user who exists and see if its happening the same way.
if it does not.
Go to the child system and delete the user completely and recreate the user one more time in CUA and see what happens.
Edited by: Franklin Jayasim on Jun 29, 2010 7:04 PM -
SAP Note 1413253 - Eletronic Duplicate Invoice Functionality for Argentina
Hi All
The last step of the SAP Note 1413253 - Eletronic Duplicate Invoice Functionality for Argentina is to create V_1AOUM view, using transaction SE54, but I am getting the error message: "Incorrect Entry" - the object is not accepting the access key that basis team sent to me.
I would like to know if someone is facing the same problem and how could I solve this.
Thanks in advance.
Joao GaiaHi Nabheet,
BSIP is the table which is used for the Vendor Duplicate invoice check.I can do the validation based on xblnr and lifnr for my requirement but i am not sure where i have to do the validations. Please suggest.
Thanks,
Vikas -
Dear all,
I want to apply a sap note 1105997 on my system. I have downloaded it in tcode snote. i have some queries in this regarding.
1. I should implement this note from client 000 or my 800 client.
2. In status, it is showing status *cannot be implemented*. What should i do?
3. Tel me the step by step procedure to implement it.
4. In future, when i will implement the support pack in which it is delivered, what will i have to do?
Thanks in advance,
AnkitHello Ankit,
Here are you answers
1. You can apply the note in any client
2. That means that you can't implement the note either the note has been implemented with the support packs that you have done already or this is not valid for you version
3. Please use the following link for applying note
http://www.sappoint.com/PHPWebUI/Documents/OSS%20Note%20Application%20-%20Using%20SNOTE.pdf
4. You will need to do Modification adjustments through SPAU if any condition like this happens
Hope it helps
Rohit -
Applying SAP Notes or BWDK*
Hi Experts,
I had issue Info-object and SAP suggested
" Import Support Package 16 for SAP NetWeaver 7.0 BI (BI Patch 16 or
SAPKW70016) into your BI system. The Support Package is available
when Note 1074388 "SAPBINews BI7.0 Support Package 16", which
describes this Support Package in more detail, is released for
customers."
But how do i do that?
How can i import the support pack first to DEV system and test it ?
Can somebody give me step by step procedure ?
I will assign pointsHi,
Pls Go to service.sap.com/https://websmp103.sap-ag.de/notes ---> click on SAP note search under SAP Support portal,You will have to log in with a valid user id and password.
You can search notes by typing the SAP Note Number, download it & There will be instructions for applying notes.
Hope this helps,
Regards
CSM Reddy -
Getting error while implementiong SAP note :Note 1240587 For MDM
Hi Experts,
I am tring to implement Note 1240587 - MDM 5.5 and 7.1 Low performance when MDM workflow is used.
The machine in which our MDM is implemeted is a Unix machine and i have created an executable jar (Including the Coding provided in the SAP note) in my Windows machine, have copied the jar in our MDM server.
when i am trying to execute the jar file i am getting error.
Exception in thread "main" java.lang.Error: Unresolved compilation problems:
UserSessionContext cannot be resolved or is not a type
The method createSessionContext(String, String, String, String) is undefined for the type DeleteCompletedWorkflowJobs
WorkflowTask cannot be resolved
at DeleteCompletedWorkflowJobs.main(DeleteCompletedWorkflowJobs.java:35)
the coding of DeleteCompletedWorkflowJobs.java class is the same as provided by SAP in note.
Kindly suggest what should be i do in this case.
thanks,
ManjitHi,
Have you read the note correctly?
It is clearly mention that
Manual Activity
VALID FOR
Software Component BBPCRM BBP / CRM
Release 400 Until SAPKU40017
Release 500 Until SAPKU50018
Release 520 Until SAPKU52010
Release 700 Until SAPKU70009
Release 600 Until SAPKU60009
Release 701 Until SAPKU70104
Before implementing the automatic corrections from this note, implement Note 1487337 or import the relevant Support Package into your system.
I think This class CL_ABAP_DYN_PRG is not available in your system which comes with support pack mentioned as above or comes with the note 1487337.
So check in se24 whether this class is available or not and if not then apply note 1487337 first and then after apply 1590863. -
Hi friends!!
May i know is there any table that gives any info about the NOTES .Hi deepika ,
Pls see the following tables
CWBNTVALID Validity table for Notes
CWBNTSTXT Short text for a Note
CWBNTMSG SAP Notes Message Log
CWBNTHEAD Header table for OSS Notes in customer systems
CWBNTGATTR Table for Any Note Attributes
CWBNTDATA Compressed data for OSS Notes
CWBNTCI Assignment of Note to correction instructions
Regards
Byju
Maybe you are looking for
-
HT2807 how to know my macbook pro retina display is lg or samsung ? thank you
Pls Help , do anyone Know . How to check my macbook Pro Retina Display Is LG or Samsung ? thank you
-
Application Basics Name Firefox Version 20.0.1 User Agent Mozilla/5.0 (Windows NT 6.0; rv:20.0) Gecko/20100101 Firefox/20.0 Build Configuration about:buildconfig Extensions Name Version Enabled ID Ask Toolbar 3.14.0.100013 true [email protected] avast!
-
Making copies of my DVD SlideShow?
If this isn't the right forum just let me know. I made a Family Tree slideshow in iPhoto and exported it to iDVD to burn. I sent it to a relative and now his sister wants a copy. Can he make a copy on his PC for her or am I going to have to do it? Th
-
Error running ejb 3.0 preview sample
I am running the howtoejb30entity sample and I get the following exception javax.ejb.EJBException: nested exception is: oracle.oc4j.rmi.OracleRemoteException: java.lang.IllegalArgumentException: Can not PERSIST detatched object: Class:oracle.ejb30.Em
-
My mini mac won't let me sign in the icon keeps going round
My mini mac won't let me sign in does not respond to anything from the keyboard or mouse