Validity Period of Business Partner in ECC 6.0

Dear Expert,
How will change the validity period of Business Partner in ISU (ECC 6.0)
At present date(Validity period) is ( from 01.01.0001 to 31.12.9999).
But I want to change the date (Validity period) is ( from 01.01.2004 to 31.12.9999).
Kindly suggest me.
Thanks & Regards,
Deepak

Dear Exprt,
Thanks for your help & co-opertaion.
Actuaaly my problem is standard address of BP
Please suggest me, how will set the flag of standard address in Table
BUT021_FS for all BP's.
Thnaks
Deepak

Similar Messages

Cost Center validity period change & Business area assignment to cost cente

We are facing with error KS134 - Transaction data already exists for the period.
We tried to create new cost center with period split. But I am getting error KS133 - Deletion is not possible (dependent records exist in table ).
Hence even creation of the new cost center is not possible. We alrady have Validity Period from 1.04.2005 to 31.12.9999.
Is there any alternative solution ?
Sumeet

Hi Sumeet,
The fields in Cost Center Master Data are "Time-Dependent" and you can see the Time-Dependency of each field in OKEG transaction code where you can find "Business Area" to be "Fiscal-Year" based.
So, if at all you need to change the Business Area, it would be possible in next financial year only...
And also, because, your Cost Center is defined from 01.04.2005 to 31.12.999, there is no way that you can change the validity period so as to create / extend in the same period-lap.
I hope you got it...
Srikanth Munnaluri
Edited by: Srikanth Munnaluri on Apr 8, 2009 3:11 PM

No users available in the change period (Create Business Partner)

Hello!
I would like to set up the business partners for Service Desk.
If I choose the solution and execute "Edit --> Create Business partner"
no useres are shown under the system.
If I change the data selection for an earlier time or blank, the situation does not change, meanwile I have enough users in the satelite systems.
How can this problem be solved?
Should the user have special autzorizations?
Thank you very much!
regards
Thom

Hello!
Thank you for your response.
Unfortunately it does not connection with adding some roles to all the users in the satelite systems.
I have done this, but without success.
<b>Has someone other information how to see the users from satelite systems in Solution Manager for assigning them to the business partners?</b>
(I have SAP R/3 Enterpeise 4.7)
What very strange is: for the local Solution Manger all the users are shown.
Thank you!
regards

MDM Business Partner 5.5 Not Creating Customer Master in SAP ECC

Hi,
I am importing Business Partner into ECC from MDM using XI with BP Business Content. This is done using proxy.
The business partner is created sucessfully but the customer master table KNA1, KNB1 is not being populated.
Does anyone experienced this before? Or has a solution for this?

I am not creating customer in ECC. I am creating Business Partner, this is because we are using IS-U which uses the BP instead of the Customer Master.
So we are using the MDM BuPa to ABAP BuPa mapping.
The thing about this is, when we run the transaction BP to create Business Partner, it automatically creates a mirror KNA1 record to match the business partner. But through MDM-XI proxy, it is not creating the record.

Business partner creation error

Hi Gurus,
1) We don't have pre-configured standard settings for FICAx (for ex standard contract categories, document types, number ranges, main and sub-transactions) in our system. Can anyone tell me how to load the pre-configured settings in SAP.
2) In BP creation after entering all the BP fields, if I try to save the data it says the BP has been created but gives a dump. We were not able to find that BP when we try to look up. I am not sure if it is a configuration issue or is it due to improper loading of FI-CA.
3) We have the same issue with contract account creation CAA1, CAA2, or CAA3. When we try to access transaction it gives dump.
The current ABAP program "SAPLBUSS" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "SAPLFSP35 " in include
"LFSP35TOP " in
line 36:
"Missing length check at runtime"
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "SAPLBUSS" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Please advise and points will be awarded for all useful solutions.
Thanks
Santosh
Edited by: Santosh Kolleti on Dec 15, 2008 6:39 PM

Hi Mahesh,
Thanks for the info, i did check the validity in the Business Partner and it is coming correctly for the one which are created.
Issue i am facing is while creation of business partner, is the any field in customer master which govern the validity of Business Partner while creation.
Thanks & Regards,
Ravi

SAP Business Partner

Hi Guys,
As we need to have Vendor mapped as Business Partner inTM, Kindly suggest how to handle the Vendor Master in ECC.
Should we create Vendor as Business Partner in ECC so as to interface with TM. If so, then how can we use this vendors in ECC for creating PO and Invoice Verification, It means that can we extend the business partner to purchasing and accounting level?
Appreciate your inputs on above.

Hi Kiran,
The TSP (Transport Service Provider ) /Vendor will be maintained in the Transaction code BP in ECC.
This needs to be done, so that Service POs can be created in ECC, where the Vendor will be the TSP. I am using TM 8.0
Hope this provides you some insight.
Regards,
Joseph M

Business Partner - Error for validity periods of addresses R11244

We are using ECC transaction BP, and we are facing the error "Error for validity periods of addresses" when we tried to change a business Partner.
Error for validity periods of addresses
Message no. R11244

Check the following notes:-
1) Note 882726 - SAP BP: Error message R11 244 (BP Transaction + BAPIs)
2) Note 1380576 - ECC BP to CRM BP address repln fails due to validity periods
thanks
G. Lakshmipathi

BP: How to hide "Validity Period" on screen Create a new Business Partner

Hi,
On screen Create a new Business Partner, I want to hide field Validity Period
-> Please tell me how to do in Customizing
Thanks and Best regards
Ms.Minh

Hi,
For each BP role, you can control the field status in configuration under BP-Role Settings. Please check whether validity period is available for field configuration or not.
Regards
Prasad AV

Business partner(employee) is not replicated from ECC to CRM

The Business partner Not replicated in CRM.Two Sales organization have been maintained for the employee for the different time lines in ECC.Checked the BDOCs and the validation error occur in FM CRM_BUPA_MAIN_VAL .The BDOCs message was saying the BPGUID was missing .Could anyone please suggest what could be the root cause of the data not replicated from ECC to CRM.

Hi Pragnya,
This is the case where at the time of creation of BP there was some issue with replication.
The BP itself is not there in CRM or only the changes are not reflected?
In such scenarios, perform following steps for successful replication:
1. Go to TCode: CRMM_BUPA_MAP
2. Enter the BP no. {initially it says it does not exist}
3. Enter ERP customer no. and press enter, the BP GUID gets filled
4. Click on "Gather Information about customer" [you can see the status of the object]
5. Now again enter the BP no. -> The customer is available in CRM now.
Regards,
Swagi

How to "PREPONE" Business partner Valid from date (Role: TR0600)

Hi Experts,
I created BP on 4/03/2011 and using this BP I created one Commercial Lease in Contract but while activating the contract system showing Warning message as mentioned below.
Role Obsolete: Master Tenant with Customer Account is only valid in period From 01.03.2011
Message no. REBPBP035
Diagnosis
The validity of role Obsolete: Master Tenant with Customer Account is restricted for this business partner to the period From 01.03.2011. However, the object to which the business partner is to be assigned is valid for a longer period (validity period of object: 25.05.2010-24.05.2013).
Procedure
Extend the validity period of the role to cover period 25.05.2010-24.05.2013 in business partner processing or assign a different partner to the object for the period in which role Obsolete: Master Tenant with Customer Account is not assigned to the partner.
Please provide me the solution to overcome this issue.
Thanks in advance.
Br,
CM

HI CM,
you have to change the date of assignment of the BP role accordingly (as
mentioned in the warning message) if you do not want the message to
appear any more. Normally, the assignment of a BP to a contract should
cover the whole validity period and if this is not given, the message
arises.
Please check the validity data of the role of the assigned business
partner. Therefore you have to go to the business partner maintenance
screen and there check the validity data of the BP role.
As the validity data of the role aren't easy to find I have attached a
screen shot for your information.
Hope this helps.
Regards, Franz

How to stop the replication of a particular business partner from sap crm to sap ecc - BDOC

Hi experts,
I need to know the procedure to stop replicating a particular BP #1234(example) from CRM to ECC. I don't want this BP to be replicated in ECC as in ECC this BP will not be maintained.
BDOC failure:
In my current scenario BDOCs are failing with error like "No BP exist". Since this BP #1234 itself is not present in ECC, the error is obvious.
This BP #1234 is defined in CRM as an Org. Unit. We don't maintain Org. Unit in ECC. All other BP are saved under this BP(#1234).
Issue:
So whenever a new BP(example #ABC) is created, the BUPA_REL type BDOC fails with error "BP with number #1234 doesnot exist.
I don't want this to happen. So what i found if we can stop the replication of this particular BP #1234, then if we make any change to the relation BP, this error should not come.
Please help me to resolve this BDOC error.
regards,
Vicky

Hi Ganesh,
1st we create a Organization structure through tcode-PPOSA_CRM.
A business Partner is created which represent the Organization Structure partner ID.
2nd we create a BP through and do a Org. assignment in tcode - PPOSA_CRM.
A business Partner is created which represent the any customer partner ID.
As soon as you do an assignment,assigning the customer BP to the org BP, a BUPA_REL BDoc flow but it fails.
Error we get in the BDoc: "BP XXXX doesnot exist"
Reason: Since this Org BP is not present in ECC, the BDoc fails in CRM.
Possible Resolution 1:
1. I created this Org. BP in ECC through CRMM_BUPA_MAP
2. The BP got created.
3.Then i tried to assign a new customer BP to Org BP to check if the issue is resolved, but we get another type of error 'BP is not defined as internal Org. Unit".
I don't know how to define BP as an internal Org. Unit in ECC?
Can you please help me in this.
Possible Resolution 2:
If i can stop this particular BUPA_REL BDoc which contains this Org.unit BP, from getting replicated, means when i assign the customer BP to Org.Unit BP, BUPA_REL should not be triggered.
I don't know if this is possible or not, but if this is possible, i would consider this a last option to resolve this issue.
Please let me know if this helps you to understand the issue i am facing?
regards,
Vicky

Business Partner Invoicing Party from vendor master in ECC

Hi!
Does anyone have experience from using partner function invoicing party in vendor master in ECC, and copying it over til business partner in SRM.
We have business requirements to have several invoicing parties for a specific vendor. In ECC, if you do this set up, you get a pop up when creating a purchase order. In the pop-up you are asked to select the invoicing party that should be used for the purchase order. We would like to have similar functionality in SRM. What are the possibiliies?
We have configured SRM with partner determination schema. This allows us to define an invoiceing party in SRM purchase order. However we would like to get suggestions based on what has been maintained in the vendor master in ECC. What actions need to be taken to obtain this? Does anyone have experience?
Many thanks,
Christine Hammerströ

This could be a big gap in SAP.
Vendor master did not fully synchronised with SRM.
Classic, you may not find this difficulty and we may not require to take this invoicing party.
this is one factor needs to considered before go for technical scenario but sap can do any thing...
check with SAP.
muthu

Replication of Business Partner Data from ECC to legacy

Hi,
My requirement is to replicate any changes made to Business Partner,should immediately get reflected in the legacy.
Which is the best method to follow.I am planning to use ABAP proxies instead of IDOCS.
As the replication needs to be immediate,Can I use ABAP Proxy.?
And for tigerring this proxy I need to enhance the code for Business Partner(BP) to call the proxy.
Is my approach correct or do I need to follow any other approach.
Regards,
Vinod Kumar.

Hi,
The approach should be based on the kind of data you want to upload in SAP. if you want to upload some standard process documents like Sales order/ purchase order then it will be good to use IDOC. As we have Standard IDOCs available in SAP to upload such document in ECC. In case you want to track the change in data from BP which is not part of any standard process then in that case you can go for ABAP proxy.
If you are using ABAP proxy you dont need to call it from BP. From BP the changes will be sent to PI (in the form of File/database Query/JMS Queues ..etc ). Then PI will call inbound proxy from ECC and post the data.
Please let me know if you have any other Qs.
Shweta.

Business Partner Count in CRM or ECC system

Hi Experts,
We have a scenario in CRM. I need the unique Business Partner List.(these are also replicated in ECC)
The scenario are as below:
1.We are creating a Business Partner(BP) for each customer.
2.For each of these BP, Contract acounts are also created.
3.One BP has multiple Contract accounts.
4.One BP has multiple relationships.
5.One BP having multiple contract accounts has multiple Contracts.
6.For one premise,one BP has one contracts account and one contract only.
I need the unique BP.But i am unable to find the unique BP as duplicate BPs are also present in the system which are created due to below reason:
1. By mistake. But duplicate BP don't have any contract account associated with it.
2.If i am an owner of a house, i have my family members or my room mate who stays with me and they are included as a BP relationship. But for them also BP are created.
I have checked in tables BUT000 and BUT100 etc but not able to extract exact number of BP.
The reason for finding the Unique BP is:
There is a company which provides services to customers. Now for each customer, a BP is created. but due to mistake or due to above reason, the customer service representatives has created duplicates or not important BP which are the secondary customers.
Now to know the exact number of BP which will inturn tell me the exact number of customers, please help me know how to extract the data.
regards,
Vicky

Hi Vicky ,
I have following comments -
1. How these contract accounts are created ? Through any enhancement done ?
2. You can differentiate the same based on the number range, if you are using different number range for source account and the contract accounts. Say for source account you can keep a number range which will be different than the contract accounts.
3. Also, as a standard, if you create any relationship, it will anyway create a BP id in the system.
4. Also, if possible do the data cleansing by archiving the duplicate BP records in your system.
Hope this will be useful
Thanks and Regards
DJ

No Business Partner generated for new employee transfer from ECC to SRM

Hi All,
I am working on SRM 5.0 with ECC 6.0 backend. The HR structure is replicated from ECC using ALE, message type:HRMD_ABA.
When I am trying to replicate a new employee from ECC to SRM, I run the O-insert first, then the S-insert and then the P-insert using PFAL transaction.
The Org structure was already in place in SRM, so it just adds the new position to it by A003 relation. The S-insert generated idoc shows status as '53' in both ECC and SRT with the relation A003, B007 and A008. But, when I check the table HRP1001, the A008 entry is missing. Due to this, no CP is generated for this position and also no business partner is generated for this user.
When I run the P-insert for this employee, the idoc is posted in ECC. But, the status of the idoc in SRT is '52' and the message shown is "The Parameter Country Has Not been Entered During Naming Format Check" Message No. R11206.
I checked the Name Format for this employee, and it is maintained as 2.
Where am I going wrong? Why is no CP person generated even when the idoc status is 53? Why isn't the new employee getting transferred to SRM server?
I have checked the SAP notes related to HR-ECC Org transfer, but I am unable to figure out the reason for this problem.
Could anyone help me out in this?
Regards,
Ancy

Maintained the name format tables (SA13)on ECC and SRM side.

Validity Period of Business Partner in ECC 6.0

Similar Messages

Maybe you are looking for