Validity sensor/digital persona not working after win7 upgrade on dv3 2050ea

Hi,
I have recently clean installed windows 7 after Vista onto a dv3 2050ea laptop. I used the HP downloads page to get all the new drivers for win7 including the validity sensor and digital persona package. Win 7 does not find a biometric sensor and I can't see where to launch digital persona from . What can I do ?
thanks
Alan

I just fixed this problem with my HDX 18,,,,,,I will walk you through the process that fixed my FP reader.
I upgraded from VISTA to WIN7, that was where the problem occured.
My PC DL'd the the updated Digital Persona Identity Protection Suite (DPIPS) program for WIN7 from the HP site.
There is a known incompatibility with this update from HP and WIN7.
The Validity Sensor Driver that detects the FP reader is the same for VISTA and WIN7 in my PC (check this first / update IF necessary).
NEXT
I went through the: START>Control Panel>Programs and Features>Digital Persona>Uninstall.
Shut down and restart 2X.
I went back to the HP site and DL'd the DPIPS program for VISTA.
RUN > DPIPS program.
UPDATE from the DPIPS Program (Version 4.11.3826) bypassing the the update from HP.
Hope this works for you.
> Was your question answered? Mark it as an Accepted Solution!
> See a great post? Click on the white star and give it a Kudos!

Similar Messages

  • T61 key not working after win7 upgrade

    Hi I upgraded my thinkpad T61´s windows from XP to 7(64bits) but one of my key from keyboard stopped to work.
    I installed all the drivers and ThinkVantage System Update, but it didn´t work.
    My keyboard layout is Portuguese-BR(ABNT) and the problem is with "/" key.
    Are there any software to test the key board? Maybe any mapping problem?
    Thanks in advance!
    Solved!
    Go to Solution.

    Hi, edbrmm
    I would recommend navigating to Control Panel ► Device Manager and opening the tree for Keyboards. Right-click on the keyboard and select Scan for hardware changes. This should scan the keyboard and let you know if anything is wrong with the device, as far as the computer is aware. Try this scan and see if any results are found.
    Best,
    Adam
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

  • My outgoing mail is not working after the upgrade OS to mavericks. my mail client version is 7.1 . please help me resolve this issue

    My outgoing mail is not working after the upgrade OS to the mavericks. my mail client version is 7.1 . please help me out resolve this issue

    Please let me know , How we can reinstall apple mail ? .
    1 . We updated OS to mavericks few machine in last december and still does't works SMTP (Out going mail) on those MAC.
    2.  After that most recently we updated OS to mavericks few machine those are working will with SMTP server .
             a)Not showing any SMTP connection in TCP trace ,
             b) Connection docter every time Says "Connecting to the server "
    3, Then we have installed thunderberd (another mail) client on maverick os, which OS related to apple mail client not woking . It seems other mail client is working well with SMTP server .
    Please help me .
    Thanks,
    Ranesh..

  • Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password is now not working after the upgrade to 10.5.

    Object is to sync address and calendar between laptop with Max OS 10.4.11 and iPhone. Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password for the laptop is now not working after the upgrade to 10.5., though it was working prior to the upgrade, for file sharing.

    @ BDAqua > I tried your suggestion but no luck. holding opt+command just gave me a blue screen and it rebotted, pushing the disk out of the drive. Yes, the macbook has 1 gb of ram. I realize that the min req. call for 2 gb of ram so i've got an order in for another dimm to put into the machine. Thanks for your suggestions.
    @ a_brody > Yes. The machine was plugged into a power source. The disk promts you to do that and i recall aspect this form other installs. Thanks for the reminder tho! ( btw your second post is like greek to me man!) 
    @ Kuncklesmac > You're right about Snow Leopard being an upgrade from Leopard. I'm aware of this. And yes previously i've been told by Apple that I needed the Box Set (not the family pack.  i am using the family pack for OS Snow Leopard) to upgrade my 10.4.11 mac - they never mentioned adding ram but i figured that out on my own and an apple specialist recommended it when i purchased Snow Leopard and confirmed that I coul duse the Snow Leopard to upgarde from Tiger (10.4.11). I've also read extensively (as i said above) that it isn't necessary (always) to buy the box set. Several 10.4.11 users report having upgraded using the Snow Leopard upgrade disk only (not the Box Set) without trouble on intel macs (also see the apple link i posted). So i'm just ondering how they did it and i cannot. 
    Thanks fo rall yor help!

  • The MSS ECM FPM Steps are not working after the upgrade

    Hi all,
    The MSS ECM FPM Steps are not working after the upgrade. We use Java Webdynpro and MSS ECM (SP17), version 603.
    On cliking the FPM steps, nothing is happening, however we can navigate using the buttons.
    But this functionality was working before the upgrade.
    Please let me know what should I do.
    Thanks,
    Sarayoodharan.K

    clinet provided in the backend system was not correct during SSO certificate using tx-code strustsso2 -  Cleint should be 000

  • When apple will fix the problem of the Bluetooth. It is not working after the upgrade to7.03

    when apple will fix the problem of the Bluetooth. It is not working after the upgrade to7.03

    there is no problem with B/T and iOS7.0.3 in my case used on iPhone 5 and 4 in several environments including in car
    Do a reset
    restore with back up and if required as new

  • TX2500Z touchscreen does not work after Windows7 upgrade from HP specific to S/N, etc on laptop.

    My TX2500Z touchscreen does not work after I upgraded to Windows 7. I cannot find any support or drivers, etc. to fix.  I bought Windows 7 directly from HP specific to my P/N and S/N on my TX2500Z.  Any help? Thanks.

    after 2,5 days (spending half a day within the apple shop as well with this problem) i have it all back on track.
    i did a lot of different things: trying to remove and reinstall iPhoto; did a SL installation over the old SL I had on my HD; backing up all the data of course before and reformatting my HD and installing a new clean SL version on it + a new clean version of iLife9 with all the updates and than I migrate with migrate assistant all the data and setting with time machine back onto it, but all this didn't work, because it also migrated the error/bug through time machine with it.
    so at the end i just installed a brand new, clean SL version on my hard drive, than I did the updates and put all my data, photos, docs, movies, mail, bookmarks, music, etc manual back into the system (drag and drop from my external HD, where i had an exact copy of my internal HD) and did all the settings again in all the different programs.
    the only thing i used migrant assistant with time machine for was for the programs. it seems to work now all fine and i even got more free space on my HD, because some of the old stuff i always carried with me but i never used, i didn't take over.
    basically everything is clean now. At least i hope and works fine. touch wood!

  • Why is Time machine backup not working after Mavericks upgrade?

    Why is Time machine backup not working after Mavericks upgrade?

    I had the same problem due to the Fire Wire port.  Apple tested it told me it is OK!, I tried a new cable, and have tested both ports on my back up device.  I find it strange that as soon as I installed Mavericks.  The drive does work using USB.  It could be a coincidence, I don't absolutely know at this point, my back up drive ports could stop working, but I doubt it!

  • Re: Safari 7.0 zoom not working after Mavericks upgrade.

    Re: Safari 7.0 zoom not working after Mavericks upgrade.

    Hey there sarunelis,
    It sounds like after updating to 10.9 the zoom function is not functioning at all. It sounds like you may need to check for 3rd party plugins. This article will help you check for that.
    Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
    http://support.apple.com/kb/ts3230
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • Z580 Dolby digital plus not working after Windows 10 upgrade

    Dolby Digital Plus is not working after I installed Windows 10 upgrade, I've tried several things to fix the problem with no luck, has anyone else experienced the same problem and found a fix ???

    Hi,I have tried by switching dolby on but its not showing any difference. The app is installed but not working you can do on/off, set equlaizer but it doesnot show any effect. Recently i have upgraded to windows10.I used to love the Dolby experience but now its not working and its really disappointment for music lovers & gamers. Please provide any help on this issue. ThanksGopal

  • Forms Personalization not working after R12 upgrade

    Hi,
    We have recently upgraded to R12. We have forms personalizations on the People, Enter and Maintain form and this is not working now after the R12 upgrade.
    I went to one of the form personalizations and Validated and Applied again but it still did not work. I also created a new one but had no success with that either.
    Any ideas how to get this working again ? Is there something extra that needs to be done for R12?
    Thanks
    Regards,
    Shalantha

    Pl indicate which version of R12 and on what form you had the personalization in the previous version. Have you checked FND_FORM_CUSTOM_% tables to ensure that the personalization survived the upgrade ?
    Pl see if these MOS Docs can help
    Forms Personalizations Unavailable After Upgrade To 12.1.x          (Doc ID 1245864.1)
    Forms Personalization Not Working After Upgrade To R12.1.3          (Doc ID 1309458.1)
    Form Personalization Value Field Not Being Retained After Upgrade          (Doc ID 1266265.1)
    Do Personalizations Holdup After A Patch Is Applied? (Doc ID 1286576.1)
    HTH
    Srini

  • HT1338 motion 4 will not work after yosemite upgrade

    motion 4 will not work after yosemite upgrade

    To be honest I do not use motion or any other compositing app so i do not miss it personally. However the new Motion is not that expensive, around $60 i think. Still, I understand your frustration.
    I am afraid the more the OS is updated the less compatible certain applications will become.
    Good Luck
    h

  • Left mouse button does not work after last upgrade on one computer.

    Second request -- left mouse button no longer works after latest upgrade. Uninstalled and reinstalled - did not help. Only affected my office computer. Left button works on other three search engines and other programs -- need suggestions...

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • HDMI not working after W10 upgrade

    Hi, My HDMI stop working after W10 upgrade. It was working fine before on W7 now i get no signal on my Philips 42" TV.The cable tested on another G61 with W7 found working fine Any clue plz. 

    Does your notebook use switchable graphics of any kind?  We might have the same problem: http://h30434.www3.hp.com/t5/Notebook-Display-and-Video/Display-Drivers-Windows-10-Cannot-Connect-to-External/td-p/5178882

  • Validity Sensors Fingerprint Reader Not Working

    Hello,
    I am running a Pavilion dv7-6c43cl, and I recently reinstalled Windows 8.1. The fingerprint reader is not working - I tried to configure it through PC Settings and the error was "An error occured processing your fingerprint". I installed drivers from people facing the same issue, as well as the drivers on HP's support page, and it didn't work. I tried uninstalling the driver, and rebooting to see if Windows would fix it - it didn't. I have no idea what to do, please help!
    Thanks!

    aqua1234
    You cannot run ProtectTools on this computer; ProtectTools Security can only be run on a business class system - the dv7 is a consumer notebook.  Your dv7 is a nice notebook; it is a different kind of animal from a business class system.
    =================================================
    Next:
    If you managed to install any piece of the ProtectTools program onto the computer, remove it, that is UNINSTALL the program.
    After the you uninstall the program from Programs and Features, Shut down the computer to a dead stop (off), boot the computer and log in.
    ====================================================
    Preparation:
    You can continue to use the Validity Sensor Driver you have installed now.  Should you need to reinstall the Driver and you lose track of it on your computer, you can retrieve a copy from your computer's Support Pages for Windows 8.
    Reference:
    HP Pavilion dv7-6c43cl Entertainment Notebook PC
    ====================================================
    Next:
    Open the file > Click on Download > Click “Open in Adobe Reader”
    Instructions to Upgrade HP SimplePass
    Read the first page: Dragon Document Guidelines
    Next:
    Follow the steps in the Section titled:
    Procedure - Update / (Re) Install HP SimplePass
    NOTES:
    You are using HP SimplePass Series 6 >> Ignore references to Series 8
    You will be downloading and installing the Series 6 HP SimplePass program from the document.
    =================================================================
    Click the Kudos Thumbs-Up to say Thank You!
    And...Click Accept as Solution when my Answer provides a Fix or Workaround!
    I am pleased to provide assistance on behalf of HP. I do not work for HP. 
    Kind Regards,
    Dragon-Fur

Maybe you are looking for

  • Instant Client with Entity Framework (ODAC 11.2.0.2.40 Beta)

    Is this at all possible (with the current Beta version of ODAC) using the Instant Client installation? I have got this working using the ODAC1120240 innstallation. But it would be nice for our customers to not having go through this (not all of them

  • Need help on fetching 500k records

    Dear programmers, I'm developing an web application that allow user to download a very large number of records. I used JDBC to query result and put it in a text file. It runs very slow and eats a lot of memory. Does anyone have suggestion? Khanh. Reg

  • Opening cursor works in 8i but fails in 9i

    I am writing a multithread application which uses proC to talk with Oracle. It works fine with 8i but it crashes with 9i. (Running with 8i library on one PC, but connects to 9i database on another PC) The same code is as below: The program crashes wi

  • XNJB problems with Macbook & Zen Vision:

    Hello all... I'm contemplating purchasing a Macbook. I only got my Zen a few weeks ago, but off of Ebay, so it's unreturnable (plus I love it). So my question is, how many of you have had major problems using XNJB to support your music? Can you uploa

  • Form Layout Formula Column Bar

    Dear All, Need help to create a formula column in the data form. I need to sum amount from january to september in the formula column. I'm unable to figure out the syntax. here is the scenario, I have column A in which I have 3 Dimension i.e. Headcou