Validity sensors driver (VFS201)---later than 4.03.340(2010) version is not working

system details-- HP pavilion DV4 1318tu. purchased in 2009
product no.-- vb619pa#acj.
Bios -- f.67 updated(2010)
OS installed -- window 7 professional SP1 32bit.
Finger print reader model-- VFS201, Hardware Id--USB\VID_138A&PID_0001&REV_0372.
Currently Using Driver---Validity Sensor WBF VFS(201) version 4.03.340(2010) downloaded from validity sensor website, working correctly on older digital persona 4.11
problem is i want to use HP simplePass 5.4.0.620 but i require new driver, i've downloaded new validity sensors
driver version,4.3.205, 4.3.304(2012), and similar version also from HP site, and installed each by removing totally all related driver and software., but these driver is not installed, because in device manager,they are not showing as biometric device.... no error is appearing.
actually let me know What are VFS201 and WBF, is new software / driver is available for for my system????
so plz let me also know what is the problem, and, is my system not supporting or driver is not availabe or correct????
if any other s/w or driver is availabe guide me........
This question was solved.
View Solution.

this helped me resolve the vfs201 prb on win 8 hope it does fr u too
http://stanley.thepharmacopedia.com/2012/12/07/validity-fingerprint-sensor-driver-windows-8-windows-...

Similar Messages

I have an older iMac 5,1 and the disc drive no longer works. I was hoping that I could the Apple USB super drive as a replacement, but the info on the super drive page says compatible with iMac 2012 or later. Does anyone know why it would not work for me?

I have an older iMac 5,1 and the disc drive no longer works. I was hoping that I could the Apple USB super drive as a replacement, but the info on the super drive page says compatible with iMac 2012 or later. Does anyone know why it would not work for me?

A reply to similar question (Q & As , in product page Apple Store) says:
"...dissable the internal reader hardware from devices setup. Then plug the external usb superdrive and that's it." Answered by Enrique T from Lima Oct 25 2013.
If you can locate an external Apple USB 'Air" superdrive for earlier model MacBook Air, that should work. The newer one for the Air is the same as for iMac, now.
You may be able to use other brands of external USB optical drive with your older intel-based iMac, as some of them function capably. A few should also be able to see system discs or other bootable utilities on DVD.
Hopefully this helps.
Good luck & happy computing!

HT1766 # is not working in my iphone 4s, when i want to see how much credit i have in iphone, i need to put # on that, than it calls and end, it is not working and not showing anything..

# is not working in my iphone 4s, when i want to see how much credit i have in iphone, i need to put # on that, than it calls and end, it is not working and not showing anything..

http://support.apple.com/kb/HT1848 Did you transfer your purchased item, take a look at the link

So my phone a 4s is less than two years old, the speakers do not work, and it will not connect to wi-fi, so my question is on the 1st of august why should I re-up my contract and purchase a phone that taken care of did not last the distance of a contract?

So my phone a 4s is less than two years old, the speakers do not work, and it will not connect to wi-fi, so my question is on the 1st of august why should I re-up my contract and purchase a phone that taken care of did not last the distance of a contract?

This is a user to user technical support forum. It is not our responsibility to convince you of anything.
Do you actually have a technical support question? If not, post your question on a blog or somewhere more appropriate.
Best,
GDG

Sup guys..i cannot open my owc mercury elite extended hard drive i tried to repair permisions but it sill did not work wat do i do

sup guys..i cannot open my owc mercury elite extended hard drive i tried to repair permisions but it sill did not work wat do i do

It's tough to help you without any information, such as how is it connected. Have you done some fundamentals like checking the cables, disconnecting and reconnecting, SMC resets and PRAM resets? If not start looking at cables, don't forget to switch them out. If you're not familiar with the resets instructions are below and don't forget to reboot in Safe Mode.
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

I can't boot windows in my iMac late 2011 as my internal cd reader does not work

i can't boot windows in my iMac late 2011 as my internal cd reader does not work

Which copy or version of Windows? and how where was it purchased?
my window installed itself perfectly on another computer.
One copy and you want to activate on two computers?
With 16GB, it will try to create 16GB hibernation file, 24GB page file, and need 20-30GB for the OS, plus room for temp, cache, applications, 9GB just temp to install SP1 update(s).
did you create 80GB or larger partition?
also, some macs with ssd + hard drive have issues, and of course you need Windows 7 64-bit home premium (Pro to use more).
OWC has up to 32GB, not cheap.
http://eshop.macsales.com/shop/memory/iMac/2010/DDR3_21.5_27
Crucial is usally very helpful, try email cs.

I have Late 2011 Macbook Pro and zxcv keys are not working?

I have late 2011 Macbook Pro and the zxcv keys are no longer working. Once I connect USB keyboard I can utilize these keys. Do anyone have solution?

How did you try to use Acitivty Monitor?
Open Activity Monitor, choose "All processes" from the list, and sort processes by CPU usage. More likely than not, there will be task using up good bit of CPU.
You could also try resetting SMC:
http://support.apple.com/kb/HT3964

Using firefox 5 - when ever I try to use the same key more than once in a row, it does not work. Hitting the multiple times does nothing at all. How can this be corrected. HELP!!!

everything that needs to be done on the keyboard is effected - letters, numbers, backspace, directionals, delete, home, end, page up, page down, '''all keys that are pressed more than once''' It does not matter what webpage I am on.
PLEASE HELP
this is very frustrating

You may have switched on an accessibility feature called FilterKeys by keeping the Shift key pressed for too long.
* http://www.microsoft.com/enable/products/windowsxp/default.aspx
*http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/access_filterkeys_turnon.mspx?mfr=true

Display Driver for TPC-2006 trying as per web soultion but not working

Hi friendz
Hope u all doing great. Actually we working on project for waste water treatment plant. Here its supplied with NI PAC and Touch panel 2006. Now the issue is in touch panel 2006 the displays are not clear and my client not happy with it.When i try yur web solution for Display Driver for TPC-2006 downloaded files are not running in touch panel, but for your information since i dont have card reader in my work bench computer i copied the file in different way dont know whether its correct r wrong. Steps i did was
- Downloaded files into my desktop computer first
- Then Inserted blank Compact Flash (CF) into touch panel.
- Through activesync synchronized flies between desktop and touch panel.
- Copied downloaded files into compact flash.
- Power off touch panel and power on no change.
If the steps gone through correct means why files not running any other solution. If wrong is there any other way coz i dont hv card reader rite now.
Pravin Jayapaul
Application Engineer

Pravin,
Did you get the following warning when you tried to activesync the files to your touchpanel?
That's the reason why you should transfer the files over with a card reader. Also, make sure your CF card is at least 256MB in size.
Message Edited by mishkin on 03-28-2009 01:55 PM
Misha
Attachments:
warning.png ‏4 KB

HT204088 Why am I not able to purchase apps with my Visa Card? I have put in everything right but it keeps telling me Credit Card processing is currently unavalible,and to try again later,I waited an hour and its still not working. What do I do?

How do I fix this?

Answered in your Other post on this Topic...
https://discussions.apple.com/message/24053626#24053626

I love my iPhone and have had it for 2 yrs. but since late Wednesday night my volume and sound have not worked. After visiting 2 different stores 4 times, apple store and calling 6 times I have been told verizon was down and would be contacted but haven't

why is this?

First you must send a follow request to the Verizon rep. They must approve it. They must also send you a follow request which you must approve. At that time, you can send a DM to the rep.
With that said, I am not sure who you should send the follow request to. The signature at the bottom of the rep's message says michelleh_vzw yet the userid of the post says yoseft_vzw.
I suppose I would try sending one to michelleh_vzw first since they signed the post. You can do that by hovering your cursor over their userid which I have included in this post and clicking on the "Follow" button in the dialogue box which opens up while you are hovering the cursor over the userid. Then you can only wait for them to respond before you can do anything else.

Validity sensor/digital persona not working after win7 upgrade on dv3 2050ea

Hi,
I have recently clean installed windows 7 after Vista onto a dv3 2050ea laptop. I used the HP downloads page to get all the new drivers for win7 including the validity sensor and digital persona package. Win 7 does not find a biometric sensor and I can't see where to launch digital persona from . What can I do ?
thanks
Alan

I just fixed this problem with my HDX 18,,,,,,I will walk you through the process that fixed my FP reader.
I upgraded from VISTA to WIN7, that was where the problem occured.
My PC DL'd the the updated Digital Persona Identity Protection Suite (DPIPS) program for WIN7 from the HP site.
There is a known incompatibility with this update from HP and WIN7.
The Validity Sensor Driver that detects the FP reader is the same for VISTA and WIN7 in my PC (check this first / update IF necessary).
NEXT
I went through the: START>Control Panel>Programs and Features>Digital Persona>Uninstall.
Shut down and restart 2X.
I went back to the HP site and DL'd the DPIPS program for VISTA.
RUN > DPIPS program.
UPDATE from the DPIPS Program (Version 4.11.3826) bypassing the the update from HP.
Hope this works for you.
> Was your question answered? Mark it as an Accepted Solution!
> See a great post? Click on the white star and give it a Kudos!

Validity Sensors Fingerprint Reader Not Working

Hello,
I am running a Pavilion dv7-6c43cl, and I recently reinstalled Windows 8.1. The fingerprint reader is not working - I tried to configure it through PC Settings and the error was "An error occured processing your fingerprint". I installed drivers from people facing the same issue, as well as the drivers on HP's support page, and it didn't work. I tried uninstalling the driver, and rebooting to see if Windows would fix it - it didn't. I have no idea what to do, please help!
Thanks!

aqua1234
You cannot run ProtectTools on this computer; ProtectTools Security can only be run on a business class system - the dv7 is a consumer notebook. Your dv7 is a nice notebook; it is a different kind of animal from a business class system.
=================================================
Next:
If you managed to install any piece of the ProtectTools program onto the computer, remove it, that is UNINSTALL the program.
After the you uninstall the program from Programs and Features, Shut down the computer to a dead stop (off), boot the computer and log in.
====================================================
Preparation:
You can continue to use the Validity Sensor Driver you have installed now. Should you need to reinstall the Driver and you lose track of it on your computer, you can retrieve a copy from your computer's Support Pages for Windows 8.
Reference:
HP Pavilion dv7-6c43cl Entertainment Notebook PC
====================================================
Next:
Open the file > Click on Download > Click “Open in Adobe Reader”
Instructions to Upgrade HP SimplePass
Read the first page: Dragon Document Guidelines
Next:
Follow the steps in the Section titled:
Procedure - Update / (Re) Install HP SimplePass
NOTES:
You are using HP SimplePass Series 6 >> Ignore references to Series 8
You will be downloading and installing the Series 6 HP SimplePass program from the document.
=================================================================
Click the Kudos Thumbs-Up to say Thank You!
And...Click Accept as Solution when my Answer provides a Fix or Workaround!
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Kind Regards,
Dragon-Fur

Validity Sensors fingerprint support

Hi, guys!
There is an effort to get Validity Sensors fingerprint work under GNU/Linux. There is a back-engineered driver for 0005 and 0008 devices. Can someone, who owns 0018 device, help? You can look at http://www.freedesktop.org/wiki/Software/fprint.
What can you do? You can sniff working of your device and send data to https://bugs.freedesktop.org/show_bug.cgi?id=37574.
Thanks!
how to sniff USB under windows
================================================================================
SnoopyPro:
I used snoopypro first to get the data. Under w7/64 however, the old version
doesn't work - I had to use the one from
http://libusb.6.n5.nabble.com/32-amp-64-bit-version-of-SnoopyPro-td3270266.html
Additionally you need to enable kind of devel mode in windows and sign the
"kernel modules" of snoopypro - http://www.ngohq.com/home.php?page=dseo
seems to work nicely for this.
Then you simply disable the device (in device manager), enable snooping in
snoopypro and reenable the device - and if still nothing happens, then also
restart the biometric service. Now you should get some data.
However The newer versions of snoopypro (also the one on the web above)
stores stuff in some binary format that nobody seems to support - except for
the discussion
http://sourceforge.net/projects/usbsnoop/forums/forum/108487/topic/3553730
and perl scripts mentioned there.
Anyhow, the data are still kind of hard to extract...
Usblyzer:
A far more convenient way was using http://www.usblyzer.com/. It doesn't
require any hacking - just install and use (for 30 days). Plus the data
are stored in a csv, which came in handy - the scripts in logs/ use this format.

aqua1234
You cannot run ProtectTools on this computer; ProtectTools Security can only be run on a business class system - the dv7 is a consumer notebook. Your dv7 is a nice notebook; it is a different kind of animal from a business class system.
=================================================
Next:
If you managed to install any piece of the ProtectTools program onto the computer, remove it, that is UNINSTALL the program.
After the you uninstall the program from Programs and Features, Shut down the computer to a dead stop (off), boot the computer and log in.
====================================================
Preparation:
You can continue to use the Validity Sensor Driver you have installed now. Should you need to reinstall the Driver and you lose track of it on your computer, you can retrieve a copy from your computer's Support Pages for Windows 8.
Reference:
HP Pavilion dv7-6c43cl Entertainment Notebook PC
====================================================
Next:
Open the file > Click on Download > Click “Open in Adobe Reader”
Instructions to Upgrade HP SimplePass
Read the first page: Dragon Document Guidelines
Next:
Follow the steps in the Section titled:
Procedure - Update / (Re) Install HP SimplePass
NOTES:
You are using HP SimplePass Series 6 >> Ignore references to Series 8
You will be downloading and installing the Series 6 HP SimplePass program from the document.
=================================================================
Click the Kudos Thumbs-Up to say Thank You!
And...Click Accept as Solution when my Answer provides a Fix or Workaround!
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Kind Regards,
Dragon-Fur

My fingerprint sensor is not working.

My fingerprint sensor is not working. states no bio-metric devices found in control panel, tried to install validating sensor but cant.... only gathers information but nothing happens after that

Hi TheSecond,
I see that you are having a problem with your fingerprint sensor and I will be happy to help. You haven't listed your operating system, so I am going to assume that it is the Windows 7 that came with the computer. If you have upgraded to 8 or 8.1 please let me know. I have included links to the software that you are going to need, the HP SimplePass and the Validity Sensor software. Install both of them and let me know how it goes.
HP SimplePass Windows 7:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-98707-1&cc=us&dlc=en&lc=en&...=
Validity Sensor Driver:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&softwareitem=ob-82046-1
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Validity sensors driver (VFS201)---later than 4.03.340(2010) version is not working

Similar Messages

Maybe you are looking for