Valuation area during copying of company code

Hi,
I am copying a company code from 0888, to a new company code:0999. But finished, i check, there is not a valuation area:0999 created?
How i create the valuation area? Our valuation level is at company code.
Thanks.

hi,
your valuatino area is your plant. once you create a plant your valuation area by defualt you shall have a valuation area created.
hope this helps
regards
sayeed

Similar Messages

  • Copy Indonesian Company Code

    Dear All,
    We would like to copy an Indonesian company code from SAP Company Code 0001.
    However, we realise that Country Version for Indonesia is not avaiable.
    Thus we could not localise the SAP Company Code 0001 as an Indonesian company code.
    We have 2 approaches to the above issue: -
    1) We have noted that Country Template is available for Indonesia.
    Thus is it feasible to copy the company code of Indonesian from the Country Template settings instead?
    2) If we are handling all the taxation and withholding issues outside SAP, can we copy any Local SAP Company Code 0001 to a new company code for our Indonesian company?
    We would like to seek for your expertise and advices especially for those whom have experience in implementing SAP for Indonesian companies, or having encountered similar issues when setting up company codes in SAP.
    We would really appreciate your advise in this area.

    hi
    see below links.this may be useful to u.
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c04a2261-640b-2a10-1f95-d307bfa7258c
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b8d163a7-0301-0010-d9b0-98f692ea3c60
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f0910e42-2911-2a10-8482-b0fd63ac79e6
    nagesh

  • Wrong business area assigned to the company code

    Hi All ,
    I am getting error " Wrong business area assigned to the company code  " while posting a document in F- 02
    please advise

    Dear Balasubramaniyan,
    You can supress the field Business area field in Field status Groups.
    For this follow the following steps
    Please check TCode OBC4 for field status variants
    > Goto G001 (General) Field status group
    >Additional Account Assignment
    > Click supress in front of business area.
    In that case, F-02 will not even ask for business area.
    Also check whether Business area FS is ticked in front of your company code in TCode OB65
    You may also refer to the following thread
    How to assign business area to company code?
    I hope this solves your query.
    Thanks & Regards
    Saurabh
    Edited by: Saurabh Khandelwal on Nov 8, 2011 1:53 PM

  • Valuation at plant level and company code level

    Hi,
    Can someone explain me the difference between the valuation at plant level and company code level with a real world example?
    Regards,
    Malsha Kalubowila

    Hi,
    Inventory can be valuated at two levels either at company code level or at plant level. If you select valuation at company code level, all materials across all the plants will have same material price since valuation is at only company code level.
    Say for example Company code 1000 is buying a material which unit price is Rs. 10 from a vendor who supplies to two different plant A & B of company code 1000.  Assume Plant A is situated near vendor premises itself (so freight cost is Re 1 extra)  whereas plant B is situated at far away from vendor place (so freight cost rs 2 extra) and both cases freight cost is borne by the company and not by vendor.
    Assuming you have selected valuation at plant level, now in plant A same material will be valauted at Rs. 11 (10 +1) whereas at plant B it is valuated at Rs. 12 (10+2).
    Whereas if you have selected valuation at company code level, price will not be valuated at plant level rather at company code level which will get updated at moving average price in this case.
    So it is always best practice to select valuation at plant level rather than at company code level.
    Reg
    Karthikeyan G

  • *When we are doing the cross company code transaction it is hitting

    Hi Experts,
    Her my client having one requirment as follows,
    When we are doing the cross company code transaction it is hitting the wrong Gl (i.e 109999999-suspense clearing a/c)
    It should hit either (135060016-tie up control a/c or 241060001-tilaknagar industries ltd control ac) What can i do?
    Regards,
    Devendra
    Edited by: Devendraachari on Jun 30, 2010 12:07 PM
    Moderator: Give proper titles to your threads

    hI,
    check what is the gl account maintained for cross company code transactions. T.code may be OBA1
    What transactions you are doing ex: Asset transfer, vendor postings .. ..
    Regards,
    Sankar
    Edited by: Durgasankar.Innamuri on Jun 30, 2010 12:09 PM

  • Copy one company code (existing one) into several target company codes (

    All,
    is there a easy method available to copy one company code (existing one) into several target company codes (new ones). The SAP standard functionality does not support this task.
    Kind regards
    Juergen Merwa

    Hi,
    Copy company codes can be done in two ways.
    1. To copy basic data i.e, through transaction ox02
    2. To copy company code relevant parameters (global) & GL accounts through EC01.
    If your option is point 1. then the best thing i suggest is go for transaction scat and create a test case and record the transaction ox02.Then afte that download the variant and fill the necessary fields accordingly and try to upload.

  • How can i find KKBER(Credit control area) accordding to BUKRS(Company Code)

    How can i find KKBER(Credit control area) accordding to BUKRS(Company Code).
    THANKS!!

    Aaawwwwwwwwww!  You guys are sweet 
    That table is blank  in my system.  I guess you can have credit controlling areas which are not tied to company codes?
    Regards,
    Rich Heilman

  • Creation of new COPA by copying previous Company code config

    Hi Guys:
    We have copied new COPA configuration for new company code with reference to already existing company code's config.
    I could not able to see Actual Flow of values by comparing different screens between old and new config. New config is not having flow of actual's data.
    Could someone guide me with verfication procedure to see why it has not transfferred a full config to new thing.
    Please advice.
    Thanks
    Sri

    Hi
    It is not clear what you copied for COPA configuration
    Please check whether the new co code is assigned to the same controlling area as the old ones.
    S Jayaram

  • Personnel area without assigning to Company code.

    Hi All,
    Can you let me know the scenario where it is not mandatory to assign a company code to the personnel area ?
    Also, is it possible to configure SAP HR for a personnel area in such a situation?
    Thanks & Regards, Swapnil Mishra

    Hi Swapnil,
    I think assignment of Personnel Area to Company Code is required when SAP HR-Payroll results are posted into Accounts, means it is required for integration of SAP HR and SAP FI. Also you will find a feature 'PPMOD' used during accounting posting also use BUKRS in decision tree.
    Regds.
    Suman

  • Copying  new company code and G/L's-how to put in Quality server?

    Hi
    We have existing system and we are creating new company code by copying from existing company code along with G/L accounts using --Copy/edit/delete company code action.
    Once this is done in Development server how do we transport this in to Quality and production servers?
    Is basis help required or as a functional consultant I can do if so how?
    regards

    Hello,
    Through STMS you can import.
    However, there should clear segregation of duties. I would expect a basis consultant should do the imports into QA or production or a centralized team.
    Regards,
    Ravi

  • Invalid Business Area in combination with company code

    Dear Expert,
    I have just created a new business area, however, when doing a posting against the new business area I got prompted an error message "Invalid Business Area 7000 with combination of company code 0001". Could anyone tell me what setting did I miss?
    Thank you

    Hi...
    As per your issue..i think your company is using validation for your   business area avoiding miss usage.
    In this case once created new business area you have to update new business area in GGB0 T.code at company code level
    So go to GGB0 and click on Financial accounting -> line item -> here select your company code and click on business area here enter your new business area and save it after that come back one step and select your company code go to Validation at menu bar select transport.
    I hope it will helps you and let me know if you have any doubts
    Regards
    vamsi

  • When i am copying 1000 company code i am getting error

    Hi Experts....
    when i am copying the 1000 Company code i am getting ABAP RUN TIME ERROR.
    Short text
        SQL error in the database when accessing a table.
    What can you do?
        Note which actions and input led to the error.
        For further help in handling the problem, contact your SAP administrator.
        You can use the ABAP dump analysis transaction ST22 to view and manage
        termination messages, in particular for long term reference.

    Hi,
    Please check whether the Run time error discription in ST22 (in Second Para.) you will find some hint.
    on parallel hands please try to debug the system with "/h" as soon as you start the copying you will find where system is providing the error.
    regards,
    Ninad Kshirsagar

  • One or More Credit Control Area assinged to one company code

    HI Guys,
    In credit management , the below said customizing is done by FI.
    Financial Accounting Customizing
    Financial Accounting  Accounts Receivable and Accounts Payable  Credit Management  Credit Control Account  Assign Permitted Control Areas to Company Code
    Can any one explain why and for what purpose “assign permitted control areas to company code”. 
    Because one control area can be assigned to one company code. If not please clarify.
    Regards,
    Sai

    Credit Control Area
    Definition
    An organizational unit that represents the area where customer credit is awarded and monitored.
    This organizational unit can either be a single or several company codes, if credit control is
    performed across several company codes. One credit control area contains credit control
    information for each customer.
    Use
    Credit and risk management takes place in the credit control area. According to your corporate
    requirements, you can implement credit management that is centralized, decentralized, or
    somewhere in between.
    For example, if your credit management is centralized, you can define one credit control
    area for all of your company codes.
    If, on the other hand, your credit policy requires decentralized credit management, you
    can define credit control areas for each company code or each group of company codes.
    Credit limits and credit exposure are managed at both credit control area and customer level.
    You set up credit control areas and other data related to credit management in Customizing for
    Financial Accounting. For more information, see the Implementation Guide under Enterprise
    Structure   Definition or   Assignment   Financial Accounting and then Maintain credit control
    area. You assign customers to specific credit control areas and specify the appropriate credit
    limits in the customer master record.

  • How see, howmany internal orders are locked status- particular company code

    Hi
    Can any one tell, what table it uses to see the total number of  locked status of internal orders in a particular company code.
    Regards
    Krish

    Hi Krish
    Use SE16N on table JEST for the status I0043 (there maybe other status called "locked" that you use, for a full list see BS23 and sort the text column to see all).
    As an alternative use KOK3 to display collectively, this includes a column for the status.
    Hope this helps.
    Elaine

  • To copy a company code to a new client

    Hi,
    I want to copy the ides company 1000 and its related data and customization from client 800 to a new client 900. How can i do that?

    Hi,
    1.Create a logical system in BD54,
    2.Create a new client(900) through transaction SCC4 and assign the logical system created in STEP-1
    3.Login into the newly created client using UID: sap* and PWD: pass
    4.Create a client copy through SCCL transaction selecting the source client as 800 and selecting the desired profile for customization.
    Regards,
    Laawanya

Maybe you are looking for

  • HT201412 IPhone 4S call problem

    On my Iphone 4S when I try to end a call by touching the "end" the screen goes blank before ending.  I hit the home button and the call comes back up still going but then the screen goes blank before I can hit the "end".  Sometimes hitting the "end"

  • How to call Crystal Reports10 from JSP?

    Hi! I want to generate a crystal report based on the parameters from database which in turn will be taken from jsp page.Can anybody help me on this? Thanks in advance!

  • Need help on search help on selection screen field

    Hi guyz, Please tell me how to pass the parameter or restrict the below search help. *s_bsart FOR ekko-bsart . " Doc. Type* For the above selection screen field i need to display the data only for cat = F if i click search help. Thanks, Mohamed Kalee

  • Propose quantity in sales order

    My customer want as soon as he inserts the material number or scans the material, then the order quantity to by filled by an amount. Usually the quantity amount will be 1 except some cases where the material sold is sold in multiples of 500 so there

  • Embedding stuff into Keynote

    Twitter - I'm currently using the workaround by showing 'WebView' of twitter page which I copied from old KN08 project. Would be cool to embed news ticker type of thing which would update in real-time..? iPhone simulator - currently using workaround