Valuation area issue

Valuation area  not defined
Message no. ME059
While creating PO i am getting this issue
in OX14 i have checked there valuation area at plant level is maintained

Hi,
Kindly check the following.
1. Check the assignment of plants to company code.
Proceed => OX18
2. Check the configuration of the valuation level.
Proceed => OX14
3. If the assignments are correct, check the entries in table
T001W.
Proceed => SM31 Table/View V_T001K_ASSIGN
Normally raised when FUNCTION 'BWKEY_INITIAL_CHECK' issues
     CALL FUNCTION 'BWKEY_INITIAL_CHECK'
          T001K_NOT_FOUND or T001W_NOT_FOUND
regards,
Lalita

Similar Messages

  • A) Negative Stock setting-valuation area b) Goods issue account during 201

    Hi,
    a) where can i find the setting for the "Negative Stock - valuation area",  I beleive this is different from the plant storage location setting for negative stock and needs to be activated first.
    b) I am doing a goods issue 201 aginst the cost center.Is there a way of finding the correct cost center.
    Thanks
    Rajiv

    Hi
    where can i find the setting for the "Negative Stock - valuation area", I beleive this is different from the plant storage location setting for negative stock and needs to be activated first.
    You can find this in OMJ1 Transaction, apart from this in the Plant parameters also you can flag the Negative stokcs for Special stocks.
    b) I am doing a goods issue 201 aginst the cost center.Is there a way of finding the correct cost center.
    In OKB9 maintain the defulat cost center for the G/L account  used for posting the Goods issue to cost center.
    You can find the G/L account attached in OBYC, GBB transaction & genaral modifier VBR, valuation class of the material
    Thanks & Regards
    Kishore

  • Valuation area 001 posting issue

    HI,
    I have got this error message. System doesn't post to VA 001 prior to 20.05.2011. How can I resolve this?
    Business Transaction Cat: Interest on  Position Date: 01.05.2011 is before the initialization key date of valuation area 001
    Message no. TPM_TRG461
    Diagnosis
    The business transaction ' Business Transaction Cat: Interest' with position date  Position Date: 01.05.2011 should be changed or created. It occurs before the initialization key date of valuation area 001. The business transaction that posted the position value on the key date may no longer specify the correct value.
    System Response
    The business transaction is not transferred to valuation area 001 since it occurs before the initialization key date.
    Procedure
    If the position displays an incorrect book value based on the change made, you may be able to adjust the book value by manual valuation.

    Hi,
    Suppose I want to capture all the postings which were made starting from the issue date to Go-live date for a fixed income instrument say bond or fixed deposit then what should be the approach?
    What if I keep initialization date as 01.01.2004 for all valuation areas and momentarily make update type not relevant for posting and complete all accrual/amortisation/valuation processes for the past postings and then revert back the changes made to update type.  Will it help to capture entire life cycle?
    Assumption is all the instruments have issue or purchase date after 01.01.2004.
    Thanks
    Edited by: Abhinav Sethi on Jun 1, 2011 10:40 AM
    Edited by: Abhinav Sethi on Jun 1, 2011 10:41 AM

  • Material ledger is not active in valuation area S001

    Dear All,
    I have created a Scheduling Agreement & did the GR. When I am doing invoice posting system is throwing error as Material ledger is not active in valuation area S001
    What might be wrong here ? For same material if I create PO then everything is working fine. Problem is only with SA.
    regds,
    CB

    Hi,
    Please check your Material Ledger Activation  setting for the Valuation AreaC002 in T-code OMX1. The Check box for the ML activation against the Valuation Area-S001 may be ticked.  After activation/ticking this box, T-code CKMSTART was not executed to complete the ML activation.  If you want the activation of Material Ledger, you have to run T-code CKMSTART to complete this ML activation or Otherwise uncheck this box.  I hope this step will resolve your issue.
    Regards
    appalas

  • Valuation Area at Company Code level

    Hi,
    In what ideal business case/industry one should set valuation area at company code level when SAP recommends valuation area must be set at Plant level ? in other words..what is the practical purpose of Valuation area at company Code level?

    Hi
    Think that valuation area link with records in table MBEW. So, if you have a company with 3 plants, and you have a single valuation for all company, in 3 plants the valuation of materials are the same, with their implications in valuation of stock and valuation of margin in sales (remember that this value can flow -really, use to flow- to condition VPRS in SD, well see SAP Note 1365939 - VPRS logic and Customizing settings in SD and SAP Note 547570 - FAQ: VPRS in pricing for more details). If you do a valuation different by plant, stock and margin calculations are different.
    What are the elements that you must considerer?
    1. If the materials is purchased, think if the same material have different conditions (different conditions in MM, for instance, indirect costs as shipment costs, different vendor with meaningful differences in prices or discounts). It's indiferent that it is a raw material or a material that you can sell. The raw material will work in product costing as an item in BOM. First of all, considerer the impact in stock value, second think how is delivered the materials to customer from plants and their impact in profitability analysis. If there are meaningful differences for the same material between different plants and you give the same value in all company, depending of the mix perhaps your customer is fooling himself about this issue.
    2. If the material is manufactured, talk with your CO consultant and what kind of impact could have different routings, BOM and prices of raw materials between plants. Same considerations for valuation of stocks and margin.
    Finally, in the page 10 of the document you can read
    Valuation must be at Plant level in the following cases:
    u2022If you want to use the application component Production Planning (PP) or Costing
    u2022If your system is a SAP Retail system
    I hope this helps you
    Regards
    Eduardo
    PD: I forgot, talk this with the CFO of the company, taking in account the restrictions (when it must be plant level).
    Edited by: E_Hinojosa on Nov 23, 2011 9:23 AM
    Edited by: E_Hinojosa on Nov 23, 2011 9:24 AM

  • Convert Operative Valuation Area to meet the New GL requirements

    Hi experts,
    Up to now, in our customeru2019s ECC 6 system in the treasury module, there was only one operative valuation area (001) that it is linked to SAP/FI. This operative valuation area calculates results and creates accounting entries based on the Local GAAP which is the only existing ledger in SAP/FI. Our customer wants to activate the New GL functionality in SAP/FI and moreover to have as leading ledger the (New) IFRS Ledger through the migration approach. The other ledger (secondary) will be the local GAAP ledger.
    What we already know is that the operative valuation area (001) must be always linked to the leading ledger. Thus the solution for this situation will be the conversion of all the flows from the existing operative valuation area (001) to the new valuation area (002)[new   Local GAAP] and after the respective customizing to initialize the IFRS balances per financial instrument to the new operative valuation are (001) [new IAS GAAP].
    Could you please be kind enough to know if there is a conversion tool which can deal with this situation or there are other alternative approaches to the issue described above?
    Thank you for reading it,
    G.P.

    Thank you all for your replies.
    Our problem is not on how to activate parallel valuation areas and to perform the respective customizing settings for parallel valuation and posting.
    Up till now the operative valuation area 001 u2013 (Local GAAP), (we do not have second valuation area), is linked with the current leading ledger in SAP/FI, (there is only one General Ledger in SAP/FI based on Local GAAP). From now on and after the activation in SAP/FI the New GL functionality through the migration process, the Leading Ledger in SAP/FI will be the (New) IFRS Ledger.
    The operative valuation area (001) in TRM must be always linked with the primary leading ledger of SAP/FI.
    The problem is in the link between the operative valuation area (001) in TRM and the Leading Ledger in SAP/FI. We cannot continue to use as operative valuation area (001) the current one that makes posting to Local GAAP ledger and SAP/FI to have as primary ledger the new one that is based on IAS GAAP.
    So the question is after the activation of the parallel valuation areas how to convert the flows from the up till now operative valuation area (001) into a secondary valuation area (002) and to use as operative valuation area (001) the new one based on IFRS.
    Thank you again for your replies, we would appreciate any help.

  • Valuation are not defined

    To create PO when i enter plant then a error comes"Valuation are not Defined".
    Please help for this issue.

    Hi
    Are you using material master or with out material master?
    If u r using material master, check the accounting view the valuation class has been maintained.
    If u r not using material master ( only short text) then u need to define valuation price at account assignment category tab.
    And check the SPRO, valuation level has been maintained or not? either plant level or company code level.
    Thanks
    Regards,
    Raman

  • Material ledger is not active in valuation area C002

    Dear All,
    I have a Scheduling Agreement for a material 'A' with Vendor 'V' with diff prices with validity dates, I did the GR & when i am posting the invoice thro' miro, system is throwing error as above Material ledger is not active in valuation area C002 Why should I activate the material ledger here ? Pls suggest how can i solve this ?
    regds,
    Kallu

    Hi
    For a Particular material, Material Ledger is active or not? Can be checked in Accountig view of Material Master.
    Why we need Material Ledger?
    A fundamental task of the material ledger is carrying inventories in multiple currencies and/or
    valuations.
    Material inventory values are normally carried by the SAP system in one currency. The material
    ledger component enables the R/3 System to carry inventory values in two additional
    currencies/valuations. Therefore, all goods movements in the material ledger are performed in up
    to 3 currencies or valuations. Currency amounts are translated into foreign currencies at
    historical exchange rates directly at the time of posting. Businesses such as those in highinflation
    countries can therefore carry their inventories in a more stable currency (such as US
    dollars). This reveals inflationary effects on inventory values.
    If you use transfer prices to represent value flows in your company in different
    valuation views, you must use the material ledger. This allows you to carry your
    inventories in three different valuations (legal valuation, valuation for reporting
    purposes, and profit center valuation).
    Before activating the material ledger, make sure you know which currencies and valuations
    you want to use, because you cannot go back and change the setting.
    Activating the material ledger is a prerequisite for using multiple valuations.
    Thanks
    Raman

  • Def of dunning area and valuation area

    hi,
    pls tell me the exact defintions of dunning area and valuation area,

    Dunning areas are used if several organizational units are responsible for carrying out dunning within one company code. These organizational units are referred to as dunning areas. The dunning area can correspond, for example, to a profit center, a distribution channel, a sales organization or a business area.
    This is a combination betwwen SD and FI
    Organizational level at which the material is valuated. A valuation area can be one of the following:
    Plant
    All plants belonging to a company code, in which case the valuation area is the company code
    This is used in MM and can be used to assign in MM G/L accounts to a valuation area.
    It possible that valuation area is used on other places to with a compleet differenrt functionality
    Paul

  • Valuation Area while creating PR

    Hi,
    While creating PR(directly), I am getting error as "valuation area are not defined". How to solve this error?
    With Regards,
    jaheer

    HI
    I think valuation area has not been maintained go to IMG enterprise structure-logisticsgenerak-definition check for the valuation level , if its defined go to its assignment part and assign that to your area,.
    Hope this helps.
    Regards
    Vignesh

  • Valuation area not yet productive with material ledger

    While doing goods receipt at MB1C,i got the below error:
    The description of the error is given below
    Valuation area XXX2 not yet productive with material ledger
    Message no. C+020
    Diagnosis
    The material ledger has been activated for the valuation area but material data has not yet been converted in this valuation area.
    Procedure for System Administration
    If you want to work with the material ledger, choose Accounting -> Controlling -> Actual Costing/Material Ledger -> Utilities -> Production Startup.
    There you can convert the data for the material ledger by following the instructions in the online documentation.
    Note
    Setting the material ledger to productive cannot be undone.
    See also:
    Actual Costing/Material Ledger in the SAP Library.
    The implementation guide for Actual Costing/Material Ledger.
    Can you kindly suggest me how to fix this error.
    Regards
    Sabera

    Hi Sabera,
    The Valuation Area is not activated for your material ledger. Go to SAP Access>>Accounting>>Controlling>>product cost controlling>>Actual Costing>>environment>>Production Start up>>Set Valuation area as productive.
    If you already activated Valution area in to Productive Statge.
    Then go to T.Code OMX1 and for your valuation area XXX2 tick the ML activation box.
    the error wont come
    regards
    srikanth

  • The valuation area defined for the plant is not defined in table T001K.

    when i creating the PO for plant ,s/m is giving the following meassage
    The valuation area defined for the plant is not defined in table T001K.

    Hi,
    You have two options to check:
    Option---1:  You defined your plant ( in t.code:OX10) and if then copy from existing plant(ex. 0001 0r 1000),check the plant not assigned to company code properly .Now assign  in  t.code OX18 and also check the table T001K after this configuration.
    Option---2: Use t-code: OMWD, check whether your new plant ( valuation area) is assigned to valuation grouping code . If not assign the same .
    Now try creating PO.
    Regards,
    Biju K

  • How do I get my songs out of the cloud?  Seems like there are issues and won"t let me sync..

    How can I get my songs out of the cloud?  Seems like there are issues, any new purchased songs are not syncing with Ipod 3rd generations.

    Do you have the original installation disc(s) that shipped with your MacBook? You're just going to have to start from scratch - as I doubt that you can recover any files without paying a fortune. Insert the installations disc, reformat your hard drive and then install the OS that came with your computer. Continue updating to 10.6.8 and then redownload and reinstall Mountain Lion again.
    That's really the only way you're going to get your machine up and running again. I would also consider buying an inexpensive external drive to use as a backup in case your brother decides to do something stupid again.
    Clinton

  • Valuation area

    hi
       when i am running FAGLF101,it is asking for valuation area.how to define valuation area.

    hi,
    You can create Valuation Area using T.Code OX14 or use the following path:
    IMG --> Enterprise Structure --> Definition --> Logistics - General --> Define valuation level
    Thanks,
    Giridhar

  • OKB9 valuation area specific CC assignment not picked up

    We have the following scenario: Valuation area is active and we use OKB9 for valuation area specific cost center assignment for certain company code/cost element combinations.
    When we try to settle a rework order that has the respective cost element in the settlement profile the OKB9 default cost center (on the valuation area level) does not get picked up and thus, Error: Cost element xyc needs an assignment to a cost object.
    Has anybody run into that?

    Hi,
      First you should check receiver category in settlement profile, which is mentioned in the work order. If settlement receiver is material, then system will derive the cost center based on the valuation area . we have to give direct cost object assignment for receiver category in the settlement profile..
    which receiver category you assigned in the settlement profile..

Maybe you are looking for