Valuation at comany code level

Hello all ,
We need to evaluate the option of using valuation at comoany code level.
I know all the limitations, constraints and the fact that it's not reversable.
That's why we cannot test it on our system.
I'm looking for an access to a system that is already configured that way.
I'll appreciate any info on such option
Best reagrds
Amnon

Hi,
see the below link, it will be useful to you.
[http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40db5441-05f5-2b10-d4be-a7c628e062a2?quicklink=index&overridelayout=true]

Similar Messages

  • Material valuation at company code level

    Hi,
    We have the valuation at company code level and when we transfer material from one plant to another (Two step stock transfer) the system dont post  fi document. When the profit center of the material is assign an fi document is posted. Somebody knows why?
    Thanks
    Edited by: Elisabete Cuellar on Jul 27, 2010 11:56 AM

    you have valuation at company code level.
    both plants are in same company code, so same valuation level, so no FI document created , the FI docuement not required here
    For profit center, FI document will be ceated for that profit center.
    This is standard process only

  • Valuation at company code  level

    Hi friends! How to configure valuation at Company code level?

    use t.code: OX14
    You define the valuation level by specifying the level at which material stocks are valuated. You can valuate material stocks at the following levels:
    Plant level
    Valuation must be at this level in the following cases:
    If you want to use the application component Production Planning (PP) or Costing
    If your system is a SAP Retail system
    Company code level
    The decision you make is valid for the whole client. You are recommended setting material valuation at plant level.

  • Split valuation while Valuation is on Company Code Level

    Dear Experts
    I have tested before the split valuation while valuation is the plant level ... the problem now that the FI consultants need to work with valuation on company code level ..
    I have activated the categories for the company code , but When i tried to crate Material the field Valuation Category is just displayed and i can't enter any value in it ... how every i have created a new field reference to make it mandatory .. still the same problem
    so what is the solution ?
    Please Advice

    Solved by checking the two indicators : Value Update and Quantity Update in the quantity folder in the attributes of the Material Type
    Edited by: Sap Sap on Apr 14, 2010 11:28 AM

  • Valuation at plant level and company code level

    Hi,
    Can someone explain me the difference between the valuation at plant level and company code level with a real world example?
    Regards,
    Malsha Kalubowila

    Hi,
    Inventory can be valuated at two levels either at company code level or at plant level. If you select valuation at company code level, all materials across all the plants will have same material price since valuation is at only company code level.
    Say for example Company code 1000 is buying a material which unit price is Rs. 10 from a vendor who supplies to two different plant A & B of company code 1000.  Assume Plant A is situated near vendor premises itself (so freight cost is Re 1 extra)  whereas plant B is situated at far away from vendor place (so freight cost rs 2 extra) and both cases freight cost is borne by the company and not by vendor.
    Assuming you have selected valuation at plant level, now in plant A same material will be valauted at Rs. 11 (10 +1) whereas at plant B it is valuated at Rs. 12 (10+2).
    Whereas if you have selected valuation at company code level, price will not be valuated at plant level rather at company code level which will get updated at moving average price in this case.
    So it is always best practice to select valuation at plant level rather than at company code level.
    Reg
    Karthikeyan G

  • Valuation Area at Company Code level

    Hi,
    In what ideal business case/industry one should set valuation area at company code level when SAP recommends valuation area must be set at Plant level ? in other words..what is the practical purpose of Valuation area at company Code level?

    Hi
    Think that valuation area link with records in table MBEW. So, if you have a company with 3 plants, and you have a single valuation for all company, in 3 plants the valuation of materials are the same, with their implications in valuation of stock and valuation of margin in sales (remember that this value can flow -really, use to flow- to condition VPRS in SD, well see SAP Note 1365939 - VPRS logic and Customizing settings in SD and SAP Note 547570 - FAQ: VPRS in pricing for more details). If you do a valuation different by plant, stock and margin calculations are different.
    What are the elements that you must considerer?
    1. If the materials is purchased, think if the same material have different conditions (different conditions in MM, for instance, indirect costs as shipment costs, different vendor with meaningful differences in prices or discounts). It's indiferent that it is a raw material or a material that you can sell. The raw material will work in product costing as an item in BOM. First of all, considerer the impact in stock value, second think how is delivered the materials to customer from plants and their impact in profitability analysis. If there are meaningful differences for the same material between different plants and you give the same value in all company, depending of the mix perhaps your customer is fooling himself about this issue.
    2. If the material is manufactured, talk with your CO consultant and what kind of impact could have different routings, BOM and prices of raw materials between plants. Same considerations for valuation of stocks and margin.
    Finally, in the page 10 of the document you can read
    Valuation must be at Plant level in the following cases:
    u2022If you want to use the application component Production Planning (PP) or Costing
    u2022If your system is a SAP Retail system
    I hope this helps you
    Regards
    Eduardo
    PD: I forgot, talk this with the CFO of the company, taking in account the restrictions (when it must be plant level).
    Edited by: E_Hinojosa on Nov 23, 2011 9:23 AM
    Edited by: E_Hinojosa on Nov 23, 2011 9:24 AM

  • Material Ledger activation at Company Code Level

    Hi All,
    I have a requirement where Material Ledger need to be activated at Company level and not at single Plant Level. We are about to implement ML and would like to have periodic unit price calculated at company code level  (e.g. 1 material, 4 plants, 1 company = 1 periodic unit price).
    I went through the customization , it only refers to Plant level (Valuation area level)
    Could anybody throw light on this.
    Regards
    Barbara

    Hi,
    What is the valuation level?
    If the valuation is at plant level you can maintain different views at different plants of these company codes.
    If only name is different i think you would do better with the same material code, and if you still want to differentiate please create two different materials
    Regards,
    Prithviraj
    Edited by: Prithviraj Talekar on Feb 11, 2009 5:25 AM

  • Vluation at company code level and transfer prices in EC-PCA

    Hi,
    We have the following configuration:
    1. Valuation of stock at Company Code level.
    2. Transfer pricing between Profit Center (i.e. Material Ledger is active).
    we experience some technical issues (e.g. we get error message when entering MM03 accounting view). Our Plants and Company Codes were created using copying standard SAP delivered Org. units.
    Did any of you implement such a configuration? Do you have knowledge of limitations and problems that might result?
    TIA for you help,
    Avihay

    Never mind. We managed somehow to figure it out ourselves.

  • Client level, chart of accounts level, company code level

    Generally what are the areas under client level, chart of accounts level, company code level.
    For Ex. document types are client level, number range company code level
    like the above does we have any list which is falling in the above levels.

    1. Generally during customising when co code data is not asked , then settings are client level.
    Country, Currency, Document types, all variants of diff types, chart of accounts, etc
    2. Every master is having data - General data level (client level) for use by all co codes, Co code data level(basically for accounting purposes) and so on.
    These are applicable to GL, Vendor, Customer, Asset, Matlerials, etc
    For particular application we have more information at another object level also- Vendor- Purchasing, Customer-Sales, materials-Plant- controlling, etc
    3. Chart of accounts level assignments are done for all automatic posting definitions-which is applicable to all company codes which are using same chart of accounts.
    4. In material setting- valuation can be grouping level, co code level or plant level as these are related to costing and product costing.
    Hope the above will give some idea.
    In the above nothing is written about CO as you have not asked-

  • F.01 - extract to consolidation on company code level

    Hi everyone
    We're trying to do an extract to consolidation on company code level (1). When popup dialog "Filename for extraction file" appears we can choose between presentation server or application server.
    When choosing presentation server and logical filename ECCS_FILE we get error GC027 (Error opening file c:\temp\EXTRACT_CS_CO.txt).
    Doing so choosing application server however works (whereas path isn't the same).
    We already checked and double-checked settings of logical file name and logical path in transaction FILE.
    Any suggestions what to do or isn't it supposed to work via presentation server?
    Thanks in advance and best regards to all
    Renaud

    I have not seen anything that you have mentioned to enter file path?
    Is this being customised for your Company?
    How did you download this before?

  • Addition of a field in vendor master table at company code level

    Hi Champs,
    My requirement is to add a field in LFB1 table.
    I have added the field in the table using append structure, that was fine.
    I need to add the same for input/output on the screen 215 of program SAPMF02K (for the screen of Payment transaction Accounting at company code level).
    As far as I know there are only screen enhancements for Vendor master(no screen exits). The screen enhacements are  "Prepare Modification-Free Enhancement in Vendor Master Record". But using that i need to create a subscreen, but in my requirement I need to add the field on the same screen.
    Is there any solution for that???
    Please let me know if my doubt is not clear.
    Regards,
    Nishant

    Hi Krish,
    I am not able to find the screen exit for my requirement.There is only screen enhancement for Vendor master.If you have any idea of the same pls let me know.
    I am ok with the solution that i need to change in the standard screen using access key,  but do i need to code anything in the PAI or PBO of the screen or it will be taken care automatically. Details of the program and screen is already given.
    Thanks
    Reagrds,
    Nishant

  • Where we assign Exchange rate type at company code level,

    Dear All,
    Where we assign Exchange rate type at company code level, In 0BA7 we assign by Document type wise and OB22 will assign by controlling area wise , but we are not maintain Controlling area, exactly where we assign , and how it will pick at the time of PO creation ,
    Thanks in advance
    Vijay

    Hi,
    In OB22 we assign Exchange rate type against company code and not against controlling area .
    Regards,
    Shayam

  • Manage vendor bank account in company code level - Best practice

    hi,
    we have on our client several company codes, and we are thinking how to manage the vendor bank accounts in company codes level or in centeral level.
    our problem with company codes level is that the vendor bank accounts define in a centeral level so technically with sap standard it is not possible. if anyone can tell me that this is possible i will be very happy to know.
    in centeral level our problem is with the business process because of we do not have a person (functionalism ) that can be responsible for all the company codes, basically every company shoule be responsible for her vendors
    please advice what is the best practice to manage vendor bank accounts in enviroment of several company code
    regards,
    meir

    hi Raghu,
    i know that but this is not my qusition.
    which company code will be responsible to enter the bank account in the vendor master data? as i say the vendor bank accounts manage in centeral level and not in company code level and this is our problem and i like to know how other companies with the same situation handle with this issue
    and also after we have the bank accounts in the vendor master data what happend if for one vendor has several bank accounts one for every company code? how the payment program F110 could know automaticaly which bank account to take (i know that there is an optoin to use Partner bank type in the vendor master data, and enter this PBT when posting the invoice of the vednor, but this is not good because of we do not want the the accountant will be responsible from which bank the vendor get his money).
    regards,
    meir

  • Customer-based BP role, Company Code level data

    System ECC 5.0.
    May be somebody can help me in a problem with Company code level data for BP.
    I'm trying to create new BP in custom Z role (created by me), on company code data screen I cannot set "Company Code Is Valid for Customer" indicator on company code selection dialog box.
    I use custom Z role with assigned custom Z rolecategory (with active BP-customer syncronizaton), It seems that there is a missing setting in SPRO for rolecategory that activate possibility to enter company code data.....

    After some investigation.... the problem was not in customising, but in some requirements from code: BP role should have the same name as s BP rolecategory. After renaming it goes.

  • Budgeting at the company code level

    Hi Experts,
    My client is in Sales and Distribtuion company and they are having sales budget and procurement budget along with financial budget at the company code level down to the branches.And also they will budgeted the advertisement and sales promotion expenses based on sales value and quantity.
    And we are not using any Treasury and Cash Management,Fund Management modules but client is asking the above requirement so How we can do the same ?
    Guide me in this and I will award you the points.

    Ok

Maybe you are looking for