Valuation class for different services

Hello Experts,
In one of the business requirements, they have around 40-50 different services and each service has to be accounted under different GL codes.
In such cases, when we create service masters, can we have the standard val class 3200 (For services) or do we need to create multiple val. classes. If yes, how many needs to be created for those 40-50 different services .
Regards
Mahesh

Hi,
Just keep one val class 3200 (For services) & create different material groups(40-50)in OMSF t.code to cater your different services(40-50 ) & assign G/Lu2019 with respective material group in t.code OMQW
For more check the links:
Re: material group with vluation class
Re: Material group link with GL account
Regards,
Biju K

Similar Messages

Different Valuation Class for Valuation category C1,C2,C3

Hi All,
I created a material with valuation category C. The material had valuation class 3042 which I created as per requirement of client. Now when I am extending the same material for valuation category C1, C2, C3 the system is only allowing me to choose valuation class 3040 which is standard sap valuation class for spare parts. Can anyone suggest if I need to create separate valuation class for C1, C2 & C3. I have split valuation also activated in the system.

Go to MMAM and then give the material and give the new valuation class and execute it. That material have change from old valuation class to new valuation class.
Example: You create material No: 678 under the Finished goods. Finished goods valuation class is 7920 is assigned in Accounting Tab 1. You want to change "678" material to Raw Material.
Go to T.Code : MMAM
Material                                : 678
New Valuation Class             : Raw Material ( Select from F4)
                                               Which Valuation area you want
Old Valuation Class              : Finished goods ( its under gray mode
                                                                          i.e can not change)
Edited by: Ganti on Dec 4, 2010 9:08 AM

Valuation class for imports and domestic material

Hi,
We wanted to hit different GLs for domestic and Imported materials inventory and therefore we have defined two valuation classes for Domestic and Imported material and these valuation classes are attached to respective materials in account view 1.
But now our problem is , we have few materials which are procured from domestic market as well as Aboard market.
Therefore now we are facing problem how to hit correct GLs based on the nature of procurement.
Thx in advance...
Regards
Sandeep marwha

use split valuation , since materail details is a master record we cant dupoicate .
so use split valuation and give a diffrent valuation class which correcponds to a diff gl account .
so when ver u create a Po givethe valuation type also , so that at Gr doing time , the stock will hit that gl act only. other wise will create issue , it will be grayed out while doin Gr .

Invalid Valuation Class for Plant

Hello,
I'm creating a material using t-code MM01, and when I enter a valuation class in the Accounting 1 view, I get error message ZA 038 "Invalid valuation class for this plant". This valuation class was working before, so I want to look into the configuration to see what may have been changed. Can anyone point me in the right direction?
Thanks,
Cynthia

Hi,
the message u got is custom defined message.
The reason for the designing the message may be that the material that u want to create is not to be meant for the plant u used.
i hope this will solve the issue.
Thank You,
Purnachandra RM

Valuation Basis for Different Payment (BWGRL) not working in 2010

Hi
We have a commission wagetype which we entered in IT 2010 in Number/Unit field.
Since we don't have premium id available, we used "Valuation Basis for Different Payment (BWGRL)" to enter the RATE.
This RATE is not working during our payroll run, however when we are using the wagetype with premium ID it is working fine.
My question is- What could be the reason that the Valuation Basis for different payment is not working ?
I checked the wagetype in V_512W_B table and it has the following configuration-
Current wage type
Valuation Basis = BLANK
Statement/WT = BLANK
%Rate = 100
1st derived wage type
Valuation Basis = BLANK
Statement/WT = BLANK
%Rate = BLANK
2nd derived wage type
Valuation Basis = BLANK
Statement/WT = BLANK
%Rate = BLANK
Would appreciate if the the fix could be provided.
Saurabh Garg

Hello,
I think in your case for commision wagetype you need to modify rule $930 to process the override rate from Infotype 2010 BWGRL field in case you are using the US standard schema.
The valuation basis table V_512W_D and rule $930 together will determine the valuation basis.
The default valuation basis comes from table V_512W_D.In case you want to override the valuation basis rate defined in this table,you need to maintain override rate in It2010 and accordingly have the logic defined in rule $930 for that particular wagetype .
Following is the sample rule definition for a similar scenario.
****(commision wagetype)
NUM= ANZHL Set
RTE= BWGRL Set
RTE?0      Comparison
      MULTI NRA Multipl.amt/no/rate
      SETIN X=NX Set variable split
      ADDWT *    OT   Output table
    =
      VALBS0     Eval.0.WT in 512W
      MULTI NRA Multipl.amt/no/rate
      SETIN X=NX Set variable split
      ADDWT *    OT   Output table
Regards,
Malathi V.

Sample CLASSES for different types of OIM components!!!

Hi Experts
Can any one provide me sample classes for different types of OIM components, adapters, scheduled tasks, etc. with your best practices for OIM java development and documentation? It would Help me lot.
Please let us know Links/Documentations.
Thanks
\oim_user

for schedulers
1. Create a java class that extends the SchedulerBaseTask (see example below)
2. Write your business logic
3. Compile and jar
4. Place the jar in the ScheduleTask directory in your OIM install
5. Create a new scheduled task using the OIM developer console
6. link in the new class into your new scheduled task.
7. Done!
Example code for a scheduled task:
import com.thortech.xl.scheduler.tasks.SchedulerBaseTask;
public class ScheduledtaskExample extends SchedulerBaseTask {
public void init()
//this method is run before execute by the scheduler
public void execute() {
//is executed by the scheduler
runMyBusinessLogic();
private void runMyBusinessLogic(){
//place your business logic here
}

Error in Valuation class for a material

Dear Friends,
While assigning Valuation class for a material, system is throwing an error message " Enter the valuation class for the previous period/year".
Please give me a solution.
Thanks in advance.
Bye,
Varun Siddharth

Dear All,
My problem is solved.
Thank you all once again.
Bye,
Varun Siddharth

Using several UMTS access points (APN) for different services

Hello,
I wonder if it is possible to use several UMTS access points (APN) for different services.
situation:
1) The iPhone is used for business AND private purposes.
2) The company's mobile telephone contract includes a APN, which is only usable by the employees' mobile phones.
problem / question:
Is it possible to define two access points in the iPhone, that for example the exchange account uses the company's APN, while all the other apps use the standard APN of the carrier?
Problem is, that some iPhone's benefits like Push-Messages are blocked by the carrier's APN. Now, I have to switch the access point by installing the appropriate profile every time I want to check my e-mails or vice versa for using "normal" apps.
I hope you can hep me.
Greets from Germany
Mitch

Thanks for your help! This really helps a lot! We actually only want to replace the autonmous access point with the controller solution and make one WLAN available at another site. From what I can see, this is possible with our current solution - we just need to switch from Layer 2 to Layer 3 and purchase the corresponding amount of supported Access Points (I think we should be able to get some refurbished ones).
Am I correct in assuming that the Access Points we want to replace (AIR-AP1230B-E-K9 with 802.11b radio only) cannot be upgraded to lightweight ones? Since if I understood document http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html correctly, this is not possible with access points that only have 802.11b radios.
Regarding the switch from Layer 2 to Layer 3: Do we really only need to perform the steps I described in my first post?
And one last question regarding REAP. As far as I understood this is only needed when local traffic needs to be maintained in case the connection to the WLC becomes unavailable. So we really don't need it if we want to access resources that are only available over the WLC?
Thanks again for your help!
Michael

Valuation class for service master

Hi Guys,
I am trying for automatic G/L account determination for Service PO's. My issue i have to enter g/l code for each line item in the PO. I am not sure how the g/l account determination based on valuation class works for Service PO's
I have assigned the account category reference to the service category and to the valuation class 3200 i have assigned a g/l account for the key FRL.
Please let me know what I am missing?
Thanks and regards,
Siddharth M

Hi Sidmi
The account assignment settings made for materials consumption will work for services also .
You do not need FRL for services (it's for sub-contracting)
Account category reference decides which all valuation classes can be used for a service category. It does not determine valuation class in a transaction (it's only checks with this setting).
If you want to determine GL account automatically in your txns, then you have following options:
1) Spro>Material management>Purchasing>material master->entry aids for items without material master
For all the material groups you want to use for services , assign a valuation class here.
2) If you maintain service masters, then you can assign valuation class in service master.
Best regards
Ramki

Best Practice for WSDL Generate Proxy Class for Web Service with Two Versions

Dear All
Thank you in advance for you help.
I would like to generate proxy classes for same function but with two versions.
Old version web service (v23.2) is used for stable modules in a project which is not going to modify.
However, enhancement is added in new version web service (v24) and is going to use in any future modules.
For example,
wsdl.exe -o="TestProxy.cs" -l:CS -n:Test -sharetypes https://community.workday.com/custom/developer/API/Notification/v23.2/Notification.wsdl https://community.workday.com/custom/developer/API/Notification/v24.0/Notification.wsdl
It generates similar classes with an '1' added at the end of the class name.
ublic partial class Event_TargetObjectType {
private Event_TargetObjectIDType[] idField;
public partial class Event_TargetObjectType1 {
private Event_TargetObjectIDType1[] idField; ...}
Since the function inside some class is the same, is it possible for WSDL.exe to generate proxy classes automatically that if the class is the same, then generate one class only (sameFunction()) but if it detects the class is different, then add '1'
to the end of class name (differentFunction() and differentFunction1())
i.e.
public class sameFunction()
public class differentFunction()
private int a;}
public class differentFunction1()
{ private int b;
Best Regards
mintssoul

Hi mintssoul,
As per this case, I have shared corresponding details below :
1.As far as I know, WCF doesn’t support method overloading directly
2.Because WSDL doesn’t support method overloading (not OOPs).
3.WCF generates WSDL which specifies the location of the service and the operation or methods the service exposes.
4.WCF use Document/Literal WSDL Style : Microsoft proposed this standard where the soap body element will contain the web method name.
5.By default all the WCF services conform to the document literal standard where the soap body should include the method name.
6.but you can differ the method in the same manually by using Name attribute like below
For example:
    [OperationContract(Name="Integers")]
    int Display(int a,int b)
    [OperationContract(Name="Doubles")]
double Display(double a,double b)
7. Or I suggest you that can use svcutil to map multiple namespaces for generating wcf service proxies .
    for more information about this, refer here :
http://stackoverflow.com/questions/1103686/use-svcutil-to-map-multiple-namespaces-for-generating-wcf-service-proxies

JNDI returns a different class for different applications

Hello,
I have a WebSphere server that runs a JNDI service, in which I defined an entry for a ConnectionFactory declared on a remote server. On the server I run an EJB application which connects the JNDI and gets the ConnectionFactory. I also have a stand-alone Java application which gets the ConnectionFactory from the JNDI on the server.
The problem is that the implementation class for the ConnectionFactory I get is different between the EJB and the stand-alone applications. The stand-alone application recieves a MQXAQueueConnectionFactory, which is just fine because I want to use XA transactions, but the EJB application receives a JMSQueueConnectionFactoryHandle!
What can be the reason for that? How does the JNDI service determine which implementation class to return?
(I suppose that is a specific behavior for Websphere...) How can I control that, if at all?
Thanks!

I have a similar situation occurring. Was therre any resolution found?

Different Class for Different Release Group

Dear All,
I want to use different release class for a new group i am creating for Purchase Order Release.
But it is not allowing me to save the same as the explanation given the overall release should not be there in one of the group created, but i am not able to find the overall release column while creating new release group.
please help
regards,
Darshan

Hi Darshan
Can you please guide me ..
I am facing the same problem assigning new class to new PO rel. Grp. and does not let me save...
wht must have gone wrong...
FYI: I am using sharing the charatersitics in both classes.
Thanks
Hiren

Change of Valuation Class for the existing material

Hello,
I am facing the issue while trying to change the valuation class of the existing material.
The material type is 'NLAG' which is non stockable material. However, all the PO are account assigned to the G/L account & cost center. Hence there is no stock of the material exists to any plant/ SLOC.
There is no open PO/ schedule lines/ Production orders are exists for the material. Also there is no stock exists at any plant. Even then system is throwing the message as 'The valuation class cannot be changed' (Message no. M3 368).
After debugging could see that it fetch the PO that are logically closed (has GR, IR, vendor payment has been made).
We do not want to have the split valuation for that material.
The material is in existance for quite a long time, so could you please help me to change the valuation class?
Thanks in advance,
Samip Patil.

Hi Raju,
To resolve SAP error message M3 368 I would suggest that you refer to SAP note number 1967543. This note outlines the issue and a resolution to it:
Please have a look at the description of the error M3 368. This error may occur if one or more of the following already exist for the material:
1. Valuated stocks in the current period or in the previous period
2. Open purchase orders or delivery schedule lines
3. Production orders for which a goods movement has already taken place
Resolution:
If you have valuated stocks in the current period or in the previous period, you will get message "Stocks already exist.". You have to clear all the stocks both in current period and previous period. Please have a look at SAP Note 30656, it shows an example on how to clear the stocks in
previous period. You can use transaction MIGO to execute this step.
If you have open purchase orders or delivery schedule lines, you will get message "Purchase orders already exist.". You can find related purchase orders after you click 'Display Error' button. Please delete them in transaction ME22N.
If you have production orders for which a goods movement has already taken place, you will get message "Production orders already exist.". Please archive these production orders. You need to set deletion flag for these orders firstly and go to SARA, use archiving object PP_ORDER to archive
these orders.
Kind regards,
James

FM/Class for creating service confirmation from service order

Hello Gurus,
Does anyone know a FM/BAPI/Class to create service confirmation from service order ?
With warm regards,
Kallol Bhowmick

Hello Kallol
You can trigger a confirmation from service order using action profile.
Here is how to define action profile:
IMG > CRM > Basic Functions > Actions > Actions in Transaction
Dialog Stucture> Action profile:
Object type = BUS2000116
Context class = CL_DOC_CONTEXT_CRM_ORDER
Dialog Stucture> Action Definition:
Processing time: Processing using selection report
Check box schedule automatically, Changeable in dialog and executable in dialog.
Dialog Stucture> Processing types
Permitted processing types of actions: Select - Method Call
Settings method call: Method - COPY_DOCUMENT (you can also try COPY_DEF_ITEMS)
Processing Parameter:
-Select change icon a new window opens - container editor
-select create icon another window opens - display container editor
Here enter following:
Element = PROCESS_TYPE
Name = PROCESS_TYPE
short desp = PROCESS_TYPE
Tab > Dtype:
Structure = CRMC_PROC_TYPE
Field = PROCESS_TYPE
Tab> initial value
Here maintain the transaction type of your confirmation.
save your action profile. Now assign action profile to Service oder transaction type.
I hope this info helps.
Regards
Rupesh Patil

How to assign a class for different colored links

Hi. I'm new to CSS and HTML and Dreamweaver. I'm trying to
get links to be different colors within the same page. I have a
navbar with a CSS style that I've assigned colors to all my links
there. They work. But if I attempt to change the links in the main
content it screws up the navbar links.
So, now, I'm trying to assign the different colors to the
links in the main content. I have the link color down but I can't
seem to get the visited, hover, active to work.
So, I read somewhere you have to assign a class to be able to
have different colors for your links on the same page. There is a
class assigned to the links I want to change but it only assigns
the link color, not the visit,hover,active colors. I don't know
where I am supposed to put the code so that only the main content
links are changed. Here is what I came up with from reading and
studying. Can somebody tell me what's wrong with it and where I am
supposed to put what in each page? This is just a CSS style page I
made and I have no idea if I even did that right. Then, I can't
figure out how to tell each page to include it for that class only.
Thanks.
@charset "utf-8";
/* CSS Document */
<class="style49"
<style type="text/css">
a:link {color: #3333FF}
a:visited {color: #009900}
a:hover {color: #6600CC}
a:active {color: #FF0000}
</style> </class>

Pseudo-classes and container styles are what you need - here
are some
tutorials.
http://www.thepattysite.com/linkstyles1.cfm
http://www.projectseven.com/tutorials/pseudoclasses/index.htm
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Newbie744" <[email protected]> wrote in
message
news:fn3***$m6q$[email protected]..
> Hi. I'm new to CSS and HTML and Dreamweaver. I'm trying
to get links to
> be
> different colors within the same page. I have a navbar
with a CSS style
> that
> I've assigned colors to all my links there. They work.
But if I attempt
> to
> change the links in the main content it screws up the
navbar links.
>
> So, now, I'm trying to assign the different colors to
the links in the
> main
> content. I have the link color down but I can't seem to
get the visited,
> hover,
> active to work.
>
> So, I read somewhere you have to assign a class to be
able to have
> different
> colors for your links on the same page. There is a class
assigned to the
> links
> I want to change but it only assigns the link color, not
the
> visit,hover,active
> colors. I don't know where I am supposed to put the code
so that only
> the
> main content links are changed. Here is what I came up
with from reading
> and
> studying. Can somebody tell me what's wrong with it and
where I am
> supposed to
> put what in each page? This is just a CSS style page I
made and I have no
> idea
> if I even did that right. Then, I can't figure out how
to tell each page
> to
> include it for that class only.
>
> Thanks.
>
> @charset "utf-8";
> /* CSS Document */
> <class="style49"
> <style type="text/css">
> a:link {color: #3333FF}
> a:visited {color: #009900}
> a:hover {color: #6600CC}
> a:active {color: #FF0000}
> </style> </class>
>
>
>

Valuation class for different services

Similar Messages

Maybe you are looking for