Valuation class for imports and domestic material
Hi,
We wanted to hit different GLs for domestic and Imported materials inventory and therefore we have defined two valuation classes for Domestic and Imported material and these valuation classes are attached to respective materials in account view 1.
But now our problem is , we have few materials which are procured from domestic market as well as Aboard market.
Therefore now we are facing problem how to hit correct GLs based on the nature of procurement.
Thx in advance...
Regards
Sandeep marwha
use split valuation , since materail details is a master record we cant dupoicate .
so use split valuation and give a diffrent valuation class which correcponds to a diff gl account .
so when ver u create a Po givethe valuation type also , so that at Gr doing time , the stock will hit that gl act only. other wise will create issue , it will be grayed out while doin Gr .
Similar Messages
-
Different stock value for accepted and rejected material in quality
Hi,
when we send the final product in quality ,some material has accepted and some material has rejected
But system is showing the value of both accepted and rejected same.
But we want that the value for both should be different.
How we can get it
Regards
PremIt is not possible to valuate differently for accepted and rejected material.
The value for material in PO for total material. So it should be same value for both.
Regards
Ravi -
Error in Valuation class for a material
Dear Friends,
While assigning Valuation class for a material, system is throwing an error message " Enter the valuation class for the previous period/year".
Please give me a solution.
Thanks in advance.
Bye,
Varun SiddharthDear All,
My problem is solved.
Thank you all once again.
Bye,
Varun Siddharth -
Invalid Valuation Class for Plant
Hello,
I'm creating a material using t-code MM01, and when I enter a valuation class in the Accounting 1 view, I get error message ZA 038 "Invalid valuation class for this plant". This valuation class was working before, so I want to look into the configuration to see what may have been changed. Can anyone point me in the right direction?
Thanks,
CynthiaHi,
the message u got is custom defined message.
The reason for the designing the message may be that the material that u want to create is not to be meant for the plant u used.
i hope this will solve the issue.
Thank You,
Purnachandra RM -
Different Valuation Class for Valuation category C1,C2,C3
Hi All,
I created a material with valuation category C. The material had valuation class 3042 which I created as per requirement of client. Now when I am extending the same material for valuation category C1, C2, C3 the system is only allowing me to choose valuation class 3040 which is standard sap valuation class for spare parts. Can anyone suggest if I need to create separate valuation class for C1, C2 & C3. I have split valuation also activated in the system.Go to MMAM and then give the material and give the new valuation class and execute it. That material have change from old valuation class to new valuation class.
Example: You create material No: 678 under the Finished goods. Finished goods valuation class is 7920 is assigned in Accounting Tab 1. You want to change "678" material to Raw Material.
Go to T.Code : MMAM
Material : 678
New Valuation Class : Raw Material ( Select from F4)
Which Valuation area you want
Old Valuation Class : Finished goods ( its under gray mode
i.e can not change)
Edited by: Ganti on Dec 4, 2010 9:08 AM -
when i start up i tunes i get the message,"The registry settings used by the i Tunes drivers for importing and burning CD's and DVD's are missing. This can happen as a result of installing other CD burning software. Please reinstall i Tunes." I tried reinstalling and still get the same message. when I ran the i Tunes diagnostics is says that the high and low filters are missing.
when i was having trouble with my optical drive(before Dell sent me a new one) the dell tech support representative had me delete some reg. files to try to fix the problem. I was told this would not affect the new drive when i install it or any of my existing programs. here is what he had me do....
Agent (CLKsmb_RyanJose_224427): "Click on Start
Click on Run
Type in REGEDIT
Click on OK
Click on the plus sign next to HKEY_LOCAL_MACHINE
Click on the plus sign next to SYSTEM
Click on the plus sign next to CurrentControlSet
Click on the plus sign next to Control"
Click on the plus sign next to Class
Click on the plus sign next to {4D36E965-E325-11CE-BFC1-08002BE10318}
On the right pane, click to highlight Upperfilters
Right click on Upperfilters
Click on Delete
Click on OK
On the right pane, click t
o highlight Lowerfilters
Right click on Lowerfilters
Click on Delete
Click on OK
Right click on Silent Install
Click on Delete
Click on OK
Close the Registry Editor
Reboot the computer
how can i get this message box to stop poping up every time i open i tunes? otherwise i tunes works fine. it still rips cd's. I just keep getting this message even after reinstalling i tines.
thanks,
chrisRefer to this article to fix:
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299 -
InterMedia Java Classes for Servlets and JSPs and Netscape
I am using the interMedia Java Classes for Servlets and JSPs to upload and retrieve multimedia data. I have found that it is much more performant in Internet Explorer (5.5) than in Netscape Communicator (4.7). In fact, I cannot upload images larger than 10K at all using netscape. However, the same image can be uploaded into the same application using IE. Is this a known issue?
Thanks in advance.Hi,
We have successfully uploaded multimedia data in the giga-byte range (Quicktime and AVI files) at the same speed with both the Netscape (4.7n) and MS IE (4.n and 5.n) browsers. One thing we have noticed is that its very important to set the manual proxy settings correctly if you have an environment with a proxy server. If you don't, then uploads can go via the proxy server and, for some reason, that seems to take considerably longer. For example, suppose you are in the www.xyzco.com domain and are connecting to a host named webserver.www.xyzco.com, then specify webserver and webserver.www.xyzco.com (to cover both cases) in the "Do not use proxy servers for..." box in the manual proxy server configuration screen. Also, if you're using a tool such as JDeveloper that uses the host IP address in the debugger environment, then you also need to add the numeric-based (nnn.nnn.nnn.nnn) IP address to this list.
Hope this helps.
In order to better understand the variety of ways in which our customers are using interMedia, we'd be very interested in knowing a little more about your application, the interMedia functionality that you are using, and how you are developing and deploying your application. If you are able to help us, please send a short email message with some information about your application, together with any comments you may have, to the Oracle interMedia Product Manager, Joe Mauro, at [email protected] Thank you!
Regards,
Simon
null -
When I attempt to log on to I tunes I get the following message:
"The registry settings used by the I Tunes drivers for importing and burning CDs and DVDs are missing.
This can happen as a result of installing other CD burning software. Please re-install I Tunes."
To my knowledge no new software has been installed. I have tried un-installing and re-installing I Tunes but I still
get the same message.
Can anyone offer any suggestions? Do I need to download a new driver?
Bill MartinI can get down as far as step 11 but it shows nothing about upper filters and when I type on "If the Upper Filters entry is missing follow these instructions" nothing happens
Do you mean you can't see the instructions on what to do if there is no UpperFilters entry?
If so, here's the relevant instructions for that step:
On the right side of the Registry Editor window, right-click the UpperFilters entry and choose Modify from the shortcut menu.
Right-click the empty white space within the right-hand portion of the Registry Editor window. From the shortcut menu, choose New > Multi-String Value.
Name this new value "UpperFilters" (without the quotes). Then, right-click the newly created UpperFilters entry and choose Modify from the shortcut menu. -
Everytime I connect my iPod Touch (4th Gen) to my laptop, running Win 7 (64 bit) I get the message "The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes" I have reinstalled iTunes several times and it has not fixed the issue. I am running ver 10.2.2.12 of iTunes. I HAVE NOT installed any other burning software to my laptop either. I haven't tried uninstalling iTunes and then re-installing it yet. Would that perhaps fix the problem? I've read that many users have had issues with the new version of the software and I was wondering if that might be causing my issue. I'd like to point out that iTunes seems to work after getting rid of the message, but I haven't tried to burn any CDs or put music from a CD to my laptop. Any ideas on how to get rid of the annoying message?
I also am having trouble hooking up with our other computers using Homegroup. I noticed quite a lot of people are having the same issue and hopefully they come up with a fix for that soon.
Thanks in advance.I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes
If you're still getting the error message (especially when you plug in the Touch), I'd check for a device filter confusion on the PC. (They can affect the connection of USB devices to a PC, as well as burning and importing CDs.) For that one, see:
iTunes for Windows: Troubleshooting CD issues caused by device filters -
When starting iTunes I continually get an error message " The registry Settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes." I have unistalled and reinstalled iTunes several times and have cleaned up the registry using a 3rd party Windows utility. Any tips on removing this error message for good?
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes -
Received this error message when starting iTunes and reinstalling does not resolve it: The registry settings used by iTunes drivers for importing and burning CDs and DVDs is missing...
Can I uninstall existing iTunes without losing my media library? and then install fresh to fix this problem?Hi there kweitkamp,
You may find the troubleshooting steps in the article below helpful.
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299
-Griff W. -
I use an ipod classic 120G. When I try to launch itunes I first of all see a box stating "The registry settings used by itunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall itunes" This I have done. obviously I cannot burn CDs but worse still is my ipod is not being recognised by itunes and will not sync. I have not installed any new burning softeware. Any suggestions please?
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes -
Is anyone else having email problems such as apps exiting in the middle of an email? It may be a wireless issue. I use First Class for work and yahoo email for personal. I will be in the middle of typing a long email and the app just quits, all data lost.
Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off" -
When I click on itunes, I get a message that says, "the registry settings used by the itune drivers for importing and burning cds and dvds are missing. this can result from installing other cd burning software. Reinstall itunes." I am a really inexperienced computer user. My computer is a windows 7. Would someone please walk me through this or tell me where to find information on how to do this. Thanking in advance, Laurie
Check out this Apple article -> iTunes for Windows: "Registry settings" warning when opening iTunes
The article will walk you through reinstalling iTunes and then checking for or creating device filters. Did it help? Did you run into any problems? -
When plugging in my iPhone to my PC, I get message "The registry settings used by Itunes drivers for importing and burning CD'd and DVD's are missing..." Can I uninstall and reinstall the iTunes app without losing all the tunes I've purchased/loaded
many thanks.
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes
Maybe you are looking for
-
Hi, I have one sales order with 5 line items, system should allowe only full quantity deliveries each line item wise. we need to control partial deliveries each line item wise, so how can we control this. can you please guide me.. Rao
-
Is Adobe Media Encoder like Compressor?
Is it best to export a finished sequence in a lossless format and then encode for distribution through Media Encoder? Is AVI/UT a good choice for the initial export? Thanks, James
-
XML style sheet error at Validate step in FDM for few locations
Hi All, Users are facing the "XML page cannot be displayed - The style sheet doesnot contain a document element. The style sheet may be empty, or it may not be weel-formed XML document.." for very fre locations while validating the data. Please advis
-
Best settings in Quicktime Pro for highest quality Youtube results.
I recently purchased Quicktime Pro so I could post my videos created in Final Cut Express 3.5 to Youtube with higher quality results than any of the 'quicktime conversion' settings such as 'iPod' or 'Lan/Intranet'. None of the suggested settings I ha
-
WIP to cost of sales order to settlement
Dear Experts, Can you look at this issue What are the steps we need to do WIP to cost of sales order to settlement Thanks Bhaskar