Valuation Data for Article Locked by user (xyz) while processing IDOC's

Prior to getting these errors, we were getting Article Data locked for goods movements errors. I changed an MM config item from "Exclusively Lock" to "Late Lock" for goods movement and it helped.
We are getting majority of these errors. Any help. SM12 does not show that the users are locking.

Hi Agarwal
Looks like your issue related to transaction, i hope any document is existed for this artilce like, PO, outbound delivery, or GR, are all may in Open status, which not processed completly, so its not allowing for movement of stock.
in which transaction your facing this error
regards
Satish

Similar Messages

  • Default data for article master -Purchasing/Logistics view

    Hello,
    What is the difference between below configuration settings:
    1. Logistics general --> Basic data retail --> General control, retail master data --> tab Control parameters for article master --> field 'vendor default data'
    2. Logistics general --> Business Partner --> Vendor --> controls --> Define account groups --> go to details --> tab default values
    Are these settings intended for same purpose ( e.g. copy default data from vendor master to article master) ?
    Thanks,
    Pat.

    Found the answer
    Copying of Data from the Vendor Master to Purchasing Data
    All changes that you make to the reference data in the vendor master record are copied to the purchasing data in the article master record if the system is configured accordingly in Customizing for Business Partners in Define Account Groups and Field Selection for Vendors.
    Copying of Data from the Vendor Master to Logistics Data
    The changes are also copied to the site-specific logistics data if the vendor is either the sole vendor or the regular vendor and if the system is configured accordingly in Customizing for Logistics Basic Data: Retail in General Control, Retail Master Data. For more information, see Vendors: Copying Changes to Other Data Records.

  • Need to get data for month entered in  user prompt to prior 12months.

    Hi,
    I have a report where i need to display total amount for current month  to prior  12 months data...first column will be current month, second column is (current month-1),3rd col: (current month-2)....( current month-12).
    Is there any way I could use current date to get previous 12 months in  variables?
    For example: if  current date is 02/15/2010, I need get  data for 01/2010, 12/2009, 11/2009,....01/2009.
    For example: if I entered Month: 03  and year:2010 in prompt , then I need to get data for prior 12 months to that in the prompt for month:03?.

    The only way to do this is using restrictions on Universe... here you can have the restrictions for every month or a range using the user prompt and the system date.
    Regards

  • Document date for time zone of user

    We have modeled the date of documents 0CREATEDON (document header and item details) to time dimensions of InfoCubes. The 0CREATEDON date reflects the system date i.e. CST. The report user wants sales document based reporting to reflect his/her time zone date.
    We have added an additional field to the sales document header extractor that records time zone date of where document was created. This does not exist for document details extractor.
    Has anyone come up against this problem? How have you modeled the data to provide such a reporting capability? Is there date conversion routines for reporting that would convert time zone dates?

    With ABAP you can use the function "CONVERT TIME ZONE". If you type this in a test-program with se38 and then press F1 while the cursos is on the wordt CONVERT you will get all necessary explanation.
    Note: I think that the timezone of the user is available in one of the sy-fields. The daylight savings indicator is available as a sy-field for sure.

  • Material valuation data lock causing failure in PGI

    Greetings experts,
    I am running into an issue where a material valuation lock is causing deliveries to fail goods issue when PGI is triggered from the shipment. These shipments contain many deliveries and are sometimes processed in mass (VT12). This is causing issues since the operator is not immediately aware an error occurred as the shipment completes normally and all attached deliveries not containing the affected material are posted. The lock appears to be originating from MIRO during AP invoice creation.  Late exclusive block (OMJI) has been activated and set to 30 seconds however this has not eliminated the issue. This supports the MIRO theory since any other posting conflict (other PGIs) should have completed and released the lock within the 30 seconds.
    Has anyone ever run into this issue before or found a work around? Custom logic to create a lock record for every material on the delivery seems excessive but may be the only way to notify the users of VT02 and MIRO that the corresponding material valuation data is already locked.
    Thanks,
    Dom

    Hi Paresh,
    Are you the person - who worked with for in Heineken? How do you do? No update from you..
    We can not change the values in the material master because of that issue..
    I have checked for the OSS notes.. but the issue had reassigned to FI team - they had raised it to SAP.
    If we create new material, there won't be a problem at all..
    Paresh - really we are all missing you..
    waiting for your reply Paresh..
    Thanks,
    Venkatesh.S.P
    Edited by: venkatesh paulraj on Mar 17, 2009 1:00 PM
    Edited by: venkatesh paulraj on Mar 17, 2009 1:01 PM

  • View RSOP data for logged on user that is not administrator

    When troubleshooting group policies I use GPResult and RSOP.msc a LOT!  Since we started deploying Windows 7 I've been having the worst time trying to use these utilities.
    Normally when a user is not getting policies I can just run rsop.msc and see if there is any error information as well as which policies have and have not applied.  In Windows 7 I am prompted for an Admin password when I run rsop.  Well that would
    be fine but now RSOP attempts to gather data for the administrator; I need to see the data for the logged on user.  The only way I've been able to work around this so far is to add the user to the local admin group then I can run rsop and gpresult.  When
    I'm done I have to remove them from the admin group.
    This seems silly to me.  Can anyone tell me how to see RSOP and GPResult data as the USER instead of the Admin.
    Also please do not chime in telling me to run rsop in planning mode as that only tells me what is supposed to happen, not what is actually happening on the system.

    Hi,
    Base on my test and research, there’s impossible to use RSOP.msc with user, and run as administrator when you login with user still doesn’t work.
    That’s necessary to login with administrator and run rsop.msc. It’s a by design feature.
    Thank you for your understanding.
    Regards,
    Leo  
    Huang
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Error-valuation data does not exist.

    hello all
    during conversion of planned order to production order system giving error-valuation data for material XXXX does not exisst. what may be the reason?
    regards

    Dear,
    Did you check that notes?
    Check the Value update indicator for the Material Type in OMS2 trxn ..
    if not put tick for Qty & Value update for your plant for that Material Type..
    Also check the accounting view 1 in ur material master record.More specifically it should be with ur valuation class,valuation type.Check also the value update indicator of the material type u r using.be sure abut ur valuation type and see whether the valuation class u have maintained is proper with all the accounting settings.
    Regards,
    R.Brahmankar

  • No batch input data for screen sapmf05A 0700 during BD20

    Hi,
    In BD20, when there are multiple idocs, after the first idoc is succesfully processd, the other idocs fail, as the first one has locked the screen and we get the message No batch input data for screen sapmf05A 0700. Then the other idocs end in error.
    Any pointers to solve this?

    There are no errors...It is because the first idoc has locked the screen, This error is appearing.

  • Gahering Data for Random Array

    I've searched the boards for help on this and doing so has
    taught me SOME of what I need to do, but not all.
    I think I can construct an array now, but what I need to know
    how to do is GATHER the data for the array from user-inputted text,
    then have Flash return a # of those inputs at random.
    It's for drug screening. I need to be able to input Employee
    names (collected by the array) and then enter the # of employees I
    want to have tested (say 6 out of 20 names entered). Then I want
    Flash to give me 6 of those names at random without duplicating.
    Like I said, from searching here, I think I learned how to
    build the array using the dynamic text boxes. What I haven't seen
    is how to return X # of that data to the user at random.
    Any ideas?

    Once you have an array, you can shuffle it and then just
    count off however many elements you need.
    http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=15&catid=288&threadid =1170742&highlight_key=y&keyword1=shuffle
    Obviously I am partial to the one that I have posted about
    halfway down. :)
    And it looks like blemmo has improved it at the end of this
    thread.
    http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=15&catid=288&threadid =1039424&highlight_key=y&keyword1=shuffle
    But I would still recommend including the ASSetPropFlag line
    from my post.

  • The transaction is locked by user...

    Hi,
    I am getting error The transaction is locked by user abcd while validating or submit the time sheet application.
    In ECC, I see a lock created for CATS_ENQUE table. We have deleted the lock entries few times but even we are getting same error.
    We are in ECC 6.0 and WAS is in 6.4.
    Please share your inputs to fix the issue.
    Thanks,
    Ajay

    Hi
    Looks like SAP standard issue, Check for SAP KBA # http://service.sap.com/sap/support/notes/1693880
    This note also has other OSS note for reference, if it is WAS 640, worth to look into 625877 - Locks remain, for kernel version.
    regards
    Swami

  • Error while processing XML for more than 5 serial no of a material

    Dear Expert
    While processing Idoc through some third party system we are getting foloowing error
    " No Batch input data for screen RIEQUI21 1000"
    As this error is related with serial no. But this happening only when we are using more than 5 Quantity for a material in a sales order and all having different Serial No. and orders having less than 5 quantity of material is running properly.
    We are using order type "ORDER 05" in Idoc config in SAP.
    Is there any note available in SAP  so that we can take more than 5 serial no for a material.
    Please revert with your valuable concern.
    Regards,
    Surendra

    Hi Gurus,
    Please revert with your responses. If you need any input from my side. please let me know.
    Its an issue of high priority.
    Thanks
    Surendra

  • When I try to edit preferences iTunes for Windows locks up.  I have only one user.  This is true even after a reboot.

    When I try to edit preferences iTunes for Windows locks up.  I have only one user.  This is true even after a reboot.

    Hello MF7642,
    Thank you for contacting Apple Support Communities.
    You can use this article to troubleshoot your issues with iTunes.
    iTunes: Missing folder or incorrect permissions may prevent authorization
    http://support.apple.com/kb/TS1277
    Regards,
    Jeff D.

  • Number Ranges-The data is locked by user ... and can be displayed only

    I wanted ti define number ranges - Transaction CXEG in Consolidation, and somehow i blocked the data (message: The data is locked by user ... and can be displayed only). How i can unlock the data so i can define new number ranges for this year. Please help

    Hi,
    Make sure you don't have any open sessions. If not, then go to SM12, and delete the relevant locked entry.
    Regards,
    Eli

  • The data form formname is currently in use and is locked by user username

    We run planning 931 on weblogic 91 and sometimes our administrators find our forms locked. So the are not able to edit them.
    The following message appears +“the data form <formname> is currently in use and is locked by user <username>”.+
    Off course it always happens with users who are not available themselves to unlock the form for others. ;-)
    Only a planning windows service restart unlockes this. In our case the form is not unlocked after 2 hours.
    I found this phrase via google. It suggests that there is a certain (time) propertie which unlockes the form after a given period.
    Does anyone know where to set this property? Or to solve this otherwise.
    Only one person at a time can use the Add a Row function on a particular form. When you have the form open, everyone else is locked out. If you close the form (using the X) instead of cancelling it, it will remain locked by you for the next two hours, even though it's not on your screen anymore. If this happens, you will be the only one who can reopen the form. You can unlock the form by reopening it and then clicking the Cancel button to exit properly.

    no solution found. A restart of the services did the job. Hopefully this is not necessary again.

  • Data in Infoprovider is locked by User - Integrated Planning

    Hello Gurus,
    My Users have different Authorizations based on Company Code. One User (BWCHECK) has the authorization for Company code 5400. The other User (BWCHECK1) has the authorization for Company code 6100. 0COMP_CODE is set as Authorization object
    Although we are working on IP we are working with the "old" authorization concept.
    If BWCHECK is working and BWCHECK1 tries also to work the message is "Data in Infoprovider is locked by User BWCHECK. Both have different company codes.
    Do you have a solution for this? Would be very helpful.
    Thank you in advance.
    Kind Regards
    Doris

    Hallo Doris,
    first check that you restrict 0COMP_CODE in your query as ment by Rodrigo.
    You can use the variable of the type "authorized values" in order to restrict the user to all values that are allowed through authorization.
    If this does not solve the problem, you can use rsplan / "Manage Lock Server" in order to check the lock settings.
    Regards,
    Kirill

Maybe you are looking for

  • Missing Index topics, links and .htm files

    I hope someone can help with this, as I am very frustrated right now. I normally use RoboHelpX5, but have also tried this in RoboHelp7. If I generate a Winhelp2000 version of our help system, everything appears normal. All of the specified index keyw

  • Updating to ios 6.1.5 leads to data loss in several apps (bento, teacher tool)

    After updating to ios 6.1.5 I have experienced severe data loss in several apps. Can I return to older version of ios to rescue data?

  • Hello, I need to know how to restore my Bookmarks that have disappeared .. Thank you

    Hello, I have noticed that my Firefox has been crashing quite often over the last 2 weeks. Now as of this morning my several Book Marks that I use daily have disappeared ... Please help me to restore this . Awaiting a response Thank you

  • No one knows what happened to my z3

    I used to live in IReland and i bought a new z3, later I traveled to Qatar where my z3 suddenly stopped working after using it in the the pool to check who missed called me and did not even submerge it , later at the same night phone stopped working,

  • PCA classic or New GL

    Hi Experts, My client has different co codes and on ECC and Classic PCA is activated but not using. Now they are going to implement ECC 6 in US company codes. The requirement for this co code is to use the PCA. Can you please suggest on the below: 1.