Valuation of charecterestics during after closing

HI,
I am facing this peculiar problem in some lots in 03 inspection recording.
after results recording we are valuating the charecterestics and then also closing them after valuation, but during saving the operation agiain the valuation window pops up and asks for valuation several times for each mic.
pls help what can be the problem.
A James

Hi,
Check following points.
1. What screen are you using for RR?
2. Just confirm once again, pop-up that comes for the same MIC of the same Operation or next operation in sequence?
3. Are you using any user exit?
4. Check the Recording configuration in SPRO in Settings for Plant Level.
Regards,
Tanuj Parikh

Similar Messages

With 7, both after closing and during, MS says FF has to close, twice, FF dosen't close and works just fine

Ok, With 7, BOTH during AND after closing, Windows pops up, FF has to close, would you like to report? Does this twice. This happen about half the time I use FF.
If it happens while in FF, it doesn't close, works fine after this, and closes OK
This did not happen with FF6 and has never happened before

But my question is: How does the software do that?
It scans the local network for computers trying to "share" software that is only supposed to be licensed for one computer. I can't give you a technical answer, I can just tell you that's what it's doing.
then what's preventing less ethical coders from deploying similar but more sinister malware with the same capability?
Nothing. Any vendor of any software, from a one person shareware or freeware app to a company the size of Apple, Microsoft or Adobe could sneak in damaging code. Any company that wants to stay in business though would never allow it.
In a typical software company (particularly larger ones), you have not only the people who write the code, but also system analysts who review the code looking for flaws or anything else that shouldn't be there.
Now I have the fear that if I'm using a wifi hotspot in a cafe or wherever, someone else with hacking skills on that same hotspot could basically see what I'm doing on my computer, without my knowledge.
The software to pry (they hope undetected) into other folks' computers on an open network like that has been around for years. That's why you at least need to have your firewall enabled when using a wifi hotspot.

Windows 8.1 desktop refresh required after closing mstsc

In Windows 8.1 Pro with Update (64-bit), in desktop mode, after closing the mstsc app (click X in title bar) during an mstsc session to a Window 7 Ent SP1 workstation, the contents of the mstsc window remain displayed and a desktop refresh (right-click->refresh
on the desktop) is required to refresh the desktop to clear the stale content from the display. This does not happen when using mstsc to connect to a legacy Win XP Pro workstation.
Video adapter is an integrated Intel P4600/P4700 with latest drivers provided my Microsoft Update (v10.18.10.3621) in multi-monitor (3 monitors) mode. The mstsc is only active on one monitor.
Anyone else seen this issue?

Monitor refresh rate (all 3 of them is set to 60hz). Only options on the primary display are 59 or 60Hz.
Setting the refresh rate to 59Hz produces same results. Setting back to 60Hz produces same results.
Sometimes part of the desktop on the monitor with the mstsc window needs to be refreshed, sometimes all of it under the mstsc windows needs to be refreshed, and sometimes, but rarely, the desktop never needs to be refreshed after closing mstsc to this specific
target.
The mstsc session is not a full screen session and is opened as per:
C:\Windows\System32\mstsc.exe "<path to rdp file>.rdp" /w:2560 /h:1530
on a 30" display set for 2560x1600, 32bpp, 60Hz
To clarify, the specific issue manifests when I disconnect the session -- ie. clicking the X in the title bar, then clicking OK in the dialog "Your remote session will be disconnected". The "Your remote session will be disconnected" dialog
disappears (sometimes), and the mstsc windows title bar disappears but some or all of everything else that was inside the mstsc windows (from the remote system) remains displayed (even the mstsc bottom window border) until the desktop is refreshed.
I do note that if I set the mstsc session to full screen and then close/disconnect the session while it is in full screen, that the refresh required after disconnect issue does not manifest.
I am not sure if this is a functional issue in the mstsc client in Windows 8.1 (file version 6.3.9600.16384) or is more generally display/explorer specific. If the issue is broader, I am only noticing it with mstsc.
I've also updated to the latest Intel HD Graphics driver (rel: 2014-08-29) and no difference.

Firefox claims that it is already running and will not let me start a new session after closing out

I've been having this problem intermittently on both my Dell XPS 8000 and my HP nx7400 laptop. The Dell is running the latest version of Windows 7 Pro and the HP is running XP Pro (fully updated). After closing out of a Firefox session and running other apps, Firefox will not let me initiate another session, saying that "Firefox is already running... Please close the session..." That's not an exact quote, but you get the idea. CTRL-ALT-DEL and all other conventional means don't work and I am forced to reboot the system. This is a royal pain.. and I need some pain relief! Any suggestions? I may revert to an earlier version of Firefox until I see a solution... can't hurt, but I really like 4.0 and I don't look at going backwards as "progress."
Thanks.
Tom

Sounds like it is hanging when you exit and later try to restart Firefox.
* How to stop the running Firefox process
** In Task Manager, does firefox.exe show in the '''Processes''' tab?
** See: http://kb.mozillazine.org/Kill_application
**Windows 7 users: http://www.techrepublic.com/blog/window-on-windows/reap-the-benefits-of-windows-7s-task-manager/2576
* What may cause Firefox to hang at exit
**Windows 7 Task Manager: http://www.techrepublic.com/blog/window-on-windows/reap-the-benefits-of-windows-7s-task-manager/2576
** http://support.mozilla.com/en-US/kb/Firefox+hangs
** http://kb.mozillazine.org/Firefox_hangs
** https://support.mozilla.com/en-US/kb/Firefox+is+already+running+but+is+not+responding
* You may need to try Firefox Safe Mode
** You may need to use '''Safe Mode''' to locate the problem:
***See: http://kb.mozillazine.org/Safe_Mode
***Firefox 4 users, hold the Shift key while clicking the Firefox 4 desktop icon to enter Safe Mode.
***Firefox Safe Mode is a diagnostic mode that disables Extensions and some other features of Firefox.
****In Firefox 4, Safe Mode also disables Plugins and Hardware Acceleration.
****If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes '''before''' starting Safe Mode (In Firefox 4, Tools > Add-ons > Appearance). See: http://support.mozilla.com/en-US/kb/Using%20themes%20with%20Firefox#w_managing-themes-and-personas
****When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode".
****Test to see if the problem you are experiencing is corrected.
*** If the problem does not occur in Safe-mode then disable all of your Extensions and Plug-ins and then try to find which is causing it
***#by enabling '''one at a time''' until the problem reappears.
***#You can also enable a few at a time (3-5), keeping track of what you just re-enabled to see if the problem re-occurs; this will help narrow down the possibilities if you have a large number of add-ons.
***#'''You MUST close and restart Firefox after EACH change''' via File > Restart Firefox (on Mac: Firefox > Quit).
***#You can use "Disable all add-ons" on the Safe Mode start window.
**See the following for more information
*** http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes
*** http://support.mozilla.com/en-US/kb/Troubleshooting+plugins
*** http://support.mozilla.com/en-US/kb/Basic+Troubleshooting
 
 
'''You need to update the following.''' The Plugin version(s) shown below was/were submitted with your question and is/are out of date. You should update to avoid known security issues with the version(s) you have installed. Click on "More system info..." to the right of your question to see what was included with your question.
*Next Generation Java Plug-in 1.6.0_24 for Mozilla browsers
#'''''Check your plugin versions''''' on either of the following links':
#*http://www.mozilla.com/en-US/plugincheck/
#*https://www-trunk.stage.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#*There are plugin specific testing links available from this page:
#**http://kb.mozillazine.org/Testing_plugins
#'''Update the [[Java]] plugin''' to the latest version.
#*Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)
#**'''''Be sure to un-check the Yahoo Toolbar option during the install if you do not want it installed.
#*Also see "Manual Update" in this article to update from the Java Control Panel in Windows Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
#* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
#* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org/Firefox_:_FAQs_:_Install_Java#Multiple_Java_Console_extensions
#*Java Test: http://www.java.com/en/download/help/testvm.xml

Adobe Premiere Pro.exe and Dynamiclinkmanager.exe *32 not stopping after closing PP CS6.03

PP 6.03 will not restart after closing program. When I try to re-start nothing happens when clicking on the PP6 icon. Looked in task manager and found that Adobe Premiere Pro.exe and Dynamiclinkmanager.exe *32 are not stopping after closing program. Once I manually stop the processes PP will restart as normal. This is on Win 7 Sp1, HP Elitebook 8760W Matrox MXO2 LE. Also Audio meters are not active during capture, can't change clip name during capture.

Hello Elcuad, and Canino video,
Please verify the following steps and report back your findings:
- uninstall the currently installed MXO2 effects and drivers
- go to control panel - user accounts - and locate the account you are using, then drop down the UAC level all the way, ok and reboot
- download our 7.02 driver with Internet Explorer, followed by our effects
- after the files are downloaded, right click each file, go to properties, and confirm they are not blocked, if they are click the unblock button
- reinstall the Matrox driver, again, the one we just downloaded, followed by the effects, reboot
- go to start, all programs and locate the premiere icon, hold shift and ctrl keys down, and launch this particular icon, keeping the keys down until the application opens up
- please build a new project and try it out

Laptop won't wake up after closing lid

The laptop won't wake up after closing the lid. It hasn't happened before. There have been no updates or changes for a day or two. The power button light and the fan are on, the caps lock key is flashing, and the wireless light is orange instead of white, like it is when powered up. I have tried ctrl-alt-del, every fn key, the esc key, the pause key, and every comination of keys that made any sense and many that didn't. I tried disconnecting the power, removing the battery and holding the power button for 30 seconds. I tried leaving the battery out while disconnected from power for 24 hours. I have looked at different forums for clues, but haven't found any help.
My next step will be to remove the hard drive to get the data, so any help would be GREATLY appreciated.

HI @tootall69
Thank you for your reply.
You can try this step as it will restore the power schemes back to the defaults.
Here is a link to Troubleshooting sleep and hibernate issues (Windows 7) that may help.
Next you can try this.
Go to start run
Type command prompt
Right click on it and run as administrator
Type powercfg -restoredefaultschemes and press enter.
You could also do a restore to before this started to happen. HP Notebook PCs - Using Microsoft System Restore
The next step would be to do a recovery back to factory.
Performing an HP system recovery (Windows 7)
During the recovery you will notice the option to backup your personal files to prevent data loss. If you have not already done one, now is a good time.
Restoring Files that were Backed Up Using HP Recovery Manager (Windows 7)
You also have the option to contact HP support for assistance. They can remotely access your sytem to find and resolvie issue for you.
Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
World Wide Phone Support
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Open Sale Order Value (FD33) not getting diminished even after closing SO?

Hi,
Upon Executing FD33 and clicking the status view for a Customer say XYZ , and then choosing EXTRAS-Open Sale Order . Say the value of open sale orders being shown is 75000. Even after closing the open sale orders (By Selecting VA05 and Putting reason for Rejection), and then also the Open Sales Order value is not getting diminished.
What could be the reason ?
Pls help.
Regrds,
Binayak

Hi Binayak,
As mentioned by you, running of Credit re-org program 'RVKRED77' is the only solution for this problem and it is known problem in SAP.
Some precautions
1. Always run the program in background by scheduling a job.
2. The idle time is around midnight when no user is working on SAP.
3. Some time the job fails as some other program may be updating same tables as this program. In such cases re-schedule the job at different time.
4. You may run the program 'RVKRED88' which will simulate without actual updation of credit values.
Hope this clarifies..
Regards,
Madhu.

FIrefox 4 beta does not work anymore. Directly after start-up (my homepage is showing) is firefox hanging, showing an hour glass. No button, URL or whatever can be used, except for the close button. But even after closing firefox, it keeps on running.

Even after closing down the application, the firefox task remains running in the background and must be killed with Windows Task Control.
Even deinstalling and installing the latest beta version does not solve it. Unfortunately I have to use Google Chrome Now.

Ok. I disabled hardware acceleration. The only extension is the McAfee Scriptscan for Firefox 15.1.0, which was already disabled. I then disabled all plugins (Acrobat, Google Update, Intel Identity Protection (2x), Java Deployment Toolkit, Java Platform, MS Office 2013, Quicktime, Shockwave, Silverlight), which were all up to date.
Normal or safe mode still has same result. No startup, no option button and no customize.
Thanks for your help. Got any other suggestions?

After closing request plan data are not longer displayed

Hello all,
guess it's a standard problem but can't find a solution in the forum.
Scenario:
I created a planning cube and an aggregation level with two key figures, a workbook
based on the planning cube and a cube with actual data. The workbook showed the
the actual data and the so far entered plan data, so everything worked fine, but after closing the request
in the plan cube manually by switching to loading and back, the workbook doesn't show the plan data anymore.
Planning is not finished, so its necessary to see the already planned values.
Thanks
jg

Hi,
I think this is an inconsistency of the OLAP cache used in the plan buffer. Clear the cache of the plan buffer query via RSRT or RSR_CACHE. The plan buffer query has the following technical name
- IC/!!1IC if the input ready query is defined on an aggregation level on the InfoCube or on a multiprovder that contains an aggregation level as partprovider that is defined on InfoCube IC
- MPRO/!!1MPRO if the input ready query is defined on an aggregation level on the multiprovider MPRO
For a final solution earch for notes in the area of OLAP and OLAP cache in connection with planning.
Regards
Gregor

After closing serversocket, process remains

Hi everyone,
I'm trying to learn to write a client/server program. I begin by creating a serversocket and waiting for data. When I close the program, the serversocket still remains even when I create handlers that try to close the socket after the GUI has been closed.
The server is as follows:
try
               ServerSocket myServerSocket = new ServerSocket(6666);
               myServerSocket.setReuseAddress(true);
               writeToDebugger("Server successfully created. Listening on port 6666\n");
               //     open a socket for listening for multiple requests
               while(listening)
                         clientSocket = myServerSocket.accept();
                         //clientSocket.setReuseAddress(true);
                         writeToDebugger("Client " + clientSocket.getInetAddress().toString() + " accepted.");
                         //store clientSocket information
                         out = new PrintWriter(
                                clientSocket.getOutputStream(), true);
                         in = new BufferedReader(
                                  new InputStreamReader(
                                      clientSocket.getInputStream()));
                         while ((inputLine = in.readLine()) != null && inputLine != "")
                              writeToDebugger(inputLine);
                         //breaker = inputLine.indexOf(',');
                         //store the incoming request's information --- username of requestor is first param, requested username is second param
                         //database.put(inputLine.substring(0, breaker), clientSocket.getInetAddress());
                         //return the IP address of the username lookup
                         //out.print(database.get(inputLine.substring(breaker+1)));
          }Here is my closing handler:
public void windowClosed(WindowEvent arg0) {
          listening=false;
          try
               System.out.println("CLOSING FOR REAL");
               if(clientSocket!=null)
                    clientSocket.close();
                    clientSocket.shutdownInput();
                    clientSocket.shutdownOutput();
               if(myServerSocket!=null)
                    myServerSocket.close();
               if(out!=null)
                    out.flush();
                    out.close();
               if(in!=null)
                    in.close();
               System.out.println("DONE CLOSING");
          catch(Exception e)
               System.out.println(e.getMessage());
     }If someone could please tell me why I have to go into the task manager to close the process after I have already closed the GUI, I'd really appreciate it.
Thanks in advance,
Julian

And you're doing all these closes in the wrong order, and redundantly.
Just close 'out' and the ServerSocket, doesn't matter in what order here.
All the other closes and shutdowns are redundant. Calling shutdownXXX after closing the socket does nothing (and calling them just before closing the socket would add nothing to what close() already does). Closing the client socket before closing the output stream built around the socket output stream denies the output stream the chance to flush.

Changes in stock value of the material even after closing period

The client closes the accounts every month end. Say they close the books of accounts for the month of Jan07 on 31st Jan 2007. After closing the account they are running MC.9 to know the stock value of different plants for the previous month. i.e. for the month of Jan07. But every day when the client runs the MC.9 they found some differences in the stock price & quantity.
For better understanding, consider they close the period on 31st Jan. When they run the MC.9 on 2nd Feb it shows the value say 100$ and qty of 100. When we run the same report on 4th Feb the value got changed to say 98$ and qty remain same. Again when we run on 6th Feb the value is changed again to say 102$ and stock is 100.
We checked the MB51 with posting date & entered date. We could not find any back posting.
What could be the reason for the variation in the stock price & qty ? Any pointers will be highly appricated.

Hi Venkat,
Your previous posting talked about variation in stock value and now you are saying that there are changes in stock qty also. So the better option would be to check those material which has variation and compare them with other standard reports to get a solution. Export the list of material to an excel sheet and compare them with that of the other reports. This would help you to find the materials which has changes and you can narrow down to the root cause. Once you get the material then u can go by posting date and find the movements.
Hope this helps. Reward if u find it useful.
regards
Anand.C

Project commitment shows even after closing PO

Hi,
I have developed a program to short close PO (in mass). This program marks Delivery indicator and sets Latest GR Date.
After running this program POs are short closed and To be delivered qty/value shows zero in MM reports such as ME2N.
The problem is that this does not close commitments in Project. When I run PS report (say CJI5), I get those POs as open and the remaining values are still shown as open commitment in PS.
Please help me understand how to close this project commitment.
Regards,
UT

I think this will work. I ran RKANBU01 program after closing PO through my program and it successfully closed open commitments.
I will confirm once I'm done with my testings...
Thanks a lot!
Regards,
UT

After closing the Firefox browser, a message appears "Severe error: Cannot load resource file; can not run". What could be wrong?

The message: "Severe Error; Can 't load resourse file; can not run" appears after closing Firefox4. All other applications on my pc do not have this problem.

I've found text of this error in npdjvu.dll plugin, remove it and error seems to disappear.

Returning to the parameter form in a report after closing the report page

hi all,
tell me a way to get the following solution
how can we return back to the parameter form of a "parameterised
report" after closing to the report window.
i ve tried a little bit with "srw_run_report"
reply me as quick as possible
prabhakaran

Try using menu options
Tools\Parameter Form Builder
you can either select/deselect any parameter from the list

Window Memory usage even after closing windows

I've included links to a test app that does nothing but
launch a window, play a sound, close window / repeat.
When application launches it uses about 20mb of memory. When
you click on the only button, it will launch a secondary window
that will simply play a wav file. (I set the volume low but you may
want to mute it :D)
After launching and closing the window several times the
memory usage goes up considerably and *never* falls back a
significant %. (I got it to about 100MB before I decided to quit
trying to increase the memory usage. Right now it's been running
w/o any user interaction since opening about 10 windows and it's
fairly stable at around 61MB (although that appears to be
increasing w/o user interaction).
Does anyone know of any methods I can use to ensure that the
memory consumed by secondary windows does not just persist forever
even after closing the window? Is there something I'm doing wrong
here?
Example Code:
http://www.vf-server.com/air/memorytest.air
(AIR)
http://www.vf-server.com/air/memorytest.zip
(source ZIP)
Note: When I *minimize* the window it looks like garbage
collection is forced and app drops back to 11MB (on restore back to
19mb).
Edit: note in your task manager, application appears as
JBTest.exe

You can call System.gc() to force the garbage collector to
run.
Try removing the event listeners when they aren't needed
anymore. I think it is more difficult for the gc to cleanup objects
when there are host objects (like Sound) refering to JavaScript
objects and JavaScript objects refering to host objects, so you
need to be especially careful about those. It SHOULD clean them up
eventually, but it may take longer for it to figure out that those
objects are no longer in use.
You might also clear the secondaryWindow reference in the
parent document when the window closes. That reference might retard
garbage collection, too.

Valuation of charecterestics during after closing

Similar Messages

Maybe you are looking for