Valuation of multiple specification is not happening

Hi All,
I am doing the result recording for an inspection lot with manual valuation. Valuation is happening for this but this valuation is not getting updated to multiple specification tab. Where I am getting lightning symbol against each country object. Please let me know the possible reason for this. Why this is happening? Thanks in advance..
Regards,Kundan

Closing This Thread....

Similar Messages

QE71 - automatic valuation is not happening

Hi,
We have created a quality plan with free inspection points,
Sample size is given as 1 and we would like to record results for 12 times for this sample.
We use QE71 for recording results but automatic valuation is not happening.
So, we are navigating to manual processing and evaluating and closing the characteristics one by one ( System takes you to QE11 screen )
How can we automate the chracteristics evaluation and closing them for 1 sample and 12 recordings - in one step with QE71 ?
Rgds,
Manohar

Hello Manohar,
Try this if works for you,
goto SPRO>QM> Basic Settting >setting at Plant Level > Plant> Result Recording > Recording Configuration > Automatic Close.
Will you please kindly mention what settings you are using in sampling procedure if any?
Best Regards,
Anand Rao

Red Hat Enterprise Linux Test Page - why am I directed to this page when I go to a specific website. It does not happen when I use other browsers so there is not a problem with the website.

Red Hat Enterprise Linux Test Page - why am I directed to this page when I go to a specific website. It does not happen when I use other browsers so there is not a problem with the website.
Just started happening yesterday.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Do you see any prefs related to that <b>knoxnews<i></i>.com</b> site on the <b>about:config</b> page if you enter that URL in the Filter?
*http://kb.mozillazine.org/about:config
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

Since I updated to firefox 3.6 I keep gettin multiple popup windows. This did not happen until after the update. The popups appear as regular windows so popup blockers can not stop them.

Since I updated to firefox 3.6 I keep gettin multiple pop up windows. This did not happen until after the update. The pop ups appear as regular windows so pop up blockers can not stop them. Why has the new update made my laptop more vulnerable. updates are supposed to be improvements!
== This happened ==
Every time Firefox opened
== as soon as I updated to ver 3.6

Im having the same problem, I updated my Iphone 4S to 6.1.3, shortly after that my phone had no audio. It was working fine one minute and then stopped. Was listening to music when sound gave out on me. It wont ring, phone just vibrates even after turning off vibration option. I've tried all the options listed and nothing. My phone has never been jailbroken either. If I connect the earphones is works perfectly. On one of my last calls received, phone's ringtone was heard for about 2 seconds before muting and just vibrating. Ringtone sounded perfect, speakers did not sound damaged.
What else could be done? I've read several post regarding this and it seems like Apple has no solution to this yet. Very dissappointed.

My iPod Touch keeps displaying the message 'This accessory not supported by iPod touch.' When I've used it w/this device multiple times, it's happening more and more frequently now. Anyway to dismiss this message for good? Because the iPod still plays .

My iPod Touch keeps displaying the message 'This accessory not supported by iPod touch.' When I've used it w/this device multiple times, it's happening more and more frequently now. Anyway to dismiss this message for good? Because the iPod still plays thru my radio and system.

That message is usually due to a bad cable.
Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
If you can’t charge your iPhone, iPad, or iPod touch
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
or send it in to Apple. See:
Service Answer Center - iPod

In printing only a specific selected section, the top line or 2 of the printout is not printing. This only happened since the last update. It does not happen when I use internet explorer.

I read many financial documents during the day. I sometimes print only a selected segment of an article or a financial statement. When I print selected only, the top line or 2 lines is omitted from the print document. It does not happen in explorer.
I used Firefox for years, and this just started in the last 3 weeks or so. I can get around it by just selecting 2 lines above what I want to print. But, it is annoying.

* [[Printing a web page]]
* [[Firefox prints incorrectly]]
Check and tell if its working.

HP7680 inkjet printer prints narrow blank (white) lines in multiple specific parts of page

My HP7680 inkjet printer prints narrow blank (white) lines in multiple specific parts of each printed page. It appears to happen in the same parts of each page printed.
- I installed new ink cartridges
- I verified that the paper I’m using is the standard inkjet paper that I always use
- In the tools section of the printer setup menu, I ran the “Clean Printhead”, “Align Printer”, and “Calibrate Linefeed” options
- In reading the printer’s manual, it seems to imply that the printheads could be the problem.
- So, I manually cleaned the printhead contacts
- When I print the self-test diagnostics page, it shows printhead health to be “Good” for both. One of them was installed in January of 2009, and the other was installed March of 2008.
- With a Q-tip, I even cleaned the clear plastic band that runs parallel to the carriage rod. (It was pretty dirty.)
Here's a scan of the printed output.
Thanks for your help!

After a 2hr phone call with tech support, here is the solution; the L7600 Series printer have a firmware update (file name: OfficejetProK7600_R2011PxN.exe) my printer was bought in 2008 thus my print head is a 2008 model, and new print heads are a 2011 modem, they don’t work right in a 2008 model this is PER the tech rep and his name was John unless you upgrade the firmware.
So I upgraded the firmware from a 2004NxN to the 2011PxN and now my printer says damaged or missing print head, I place the original print head from 2008 back in the machine and it’s fine, so I bought a 3rd print head for 2011 and it says the print head is damaged.
After another 30min or so I was told I have a bad printer and sorry the warranty is out, but the old print head works but any new print heads do not, this sounds like a HP Error firmware / hardware compatibility issue, not my issue, but HP will not repair.
HP has no fix nor will they repair the printer.

Void multiple PY checks not through off cycle work bench

Hello,
We had a scenario where we had to void nearly 60 regular PY checks in our previous period. The postings to FI did not happen yet. We went to off cycle work bench and voided 60 checks one after the other.
Is there any quicker way to void multiple PY checks (If we know the check number to void). What if we run into a scenario where we need to void few hundreds.
Any advice is greatly appreciated.

Hi Priya,
I feel you have got answer of this query.... as it was processed through another thread. I will request you to close this thread as for a question 2 threads are there. And if moderator will see it then they may block the thread.
- Praveen

Overhead calculation not happening after using Overhead key and orgin group

overhead calculation not happening after using Overhead key and orgin group.
There was a runtime error earlier related to u201Cdefine credit u201C IMG node under costing sheet component and we have applied SAP note 769946 and that error was gone out of the way
We want to apply/add Overhead to SFG/FG materials.
We are using PP order with PCC(product cost collector) as the cost object , i.e costing by period.(system ECC 6)
But our problem is with material standard cost estimate process.
We have assigned overhead keys to the percentage rates in costing sheet for material standard costing and assigned the origin groups to the credits of costing sheet. But after running the cost estimate overhead is not taking into account for standard cost calculation.
In the define credit entry table key field is valid to date strangly and actually system should allow one than one entry with same valid to date and same sec.Cost element(type-41) for different cost centers.
But if we without using overhead key and origin group, the entire cost in that supporting cost center will come to all materials (SFG/FG) and we can not distinguish between different product materials(SFG /FG).
We have checked all things as mentined below.
Firstly that the correct costing sheet is assigned to the valuation
variant.
That the costing sheet is entered for the appropriate material type:
Finished and semi finished or material components.
All of the above can be checked and verified via transaction OKKN.
In addition make sure that the base value maintained is present in the
costing, for example the base may include an Origin group, is that
origin group part of the materials being costed?
Similarly if the base is found and values exist how is the overhead
rate of the costing sheet set up, is it valid etc.
And finally do a similar check for the credit.
we doubt this as a programm error...
So, request all experts to have ur feedback..

Dear,
Check your origin group & material unit of mesaurement is same.
some time in costing sheet origin group is maintain in different unit & for materail it's maitain in other unit of mesaurement.
You can see unit of measure for material in Additional data - unit of measure.
Check BOM component material unit also.
Check same unit of measure is maintain in KZS2
I hope above will useful.
GOPAN

Overhead calculation not happening after using orgin group.

overhead calculation not happening after using orgin group.
There was a runtime error earlier related to u201Cdefine credit u201C IMG node under costing sheet component and we have applied SAP note 769946 and that error was gone out of the way
We want to apply/add Overhead to SFG/FG materials.
We are using PP order with PCC(product cost collector) as the cost object , i.e costing by period.(system ECC 6)
But our problem is with material standard cost estimate process.
We have assigned overhead keys to the percentage rates in costing sheet for material standard costing and assigned the origin groups to the credits of costing sheet. But after running the cost estimate overhead is not taking into account for standard cost calculation.
In the define credit entry table key field is valid to date strangly and actually system should allow one than one entry with same valid to date and same sec.Cost element(type-41) for different cost centers.
But if we without using overhead key and origin group, the entire cost in that supporting cost center will come to all materials (SFG/FG) and we can not distinguish between different product materials(SFG /FG).
We have checked all things as mentined below.
Firstly that the correct costing sheet is assigned to the valuation
variant.
That the costing sheet is entered for the appropriate material type:
Finished and semi finished or material components.
All of the above can be checked and verified via transaction OKKN.
In addition make sure that the base value maintained is present in the
costing, for example the base may include an Origin group, is that
origin group part of the materials being costed?
Similarly if the base is found and values exist how is the overhead
rate of the costing sheet set up, is it valid etc.
And finally do a similar check for the credit.
we doubt this as a programm error...
So, request all experts to have ur feedback..

Dear,
Check your origin group & material unit of mesaurement is same.
some time in costing sheet origin group is maintain in different unit & for materail it's maitain in other unit of mesaurement.
You can see unit of measure for material in Additional data - unit of measure.
Check BOM component material unit also.
Check same unit of measure is maintain in KZS2
I hope above will useful.
GOPAN

Partner functions for a specific customer not seen in XD03 but appears in XD02

Hello SAP Gurus,
I have a situation where a partner functions for a specific customer not seen in XD03 but appears in XD02, In XD03 only one partner function (Ship to) appears but in XD02 (Sold to, Ship to, Bill to and payer appears), from the customer master I can see that account group for this customer has been changes to Sold to (Z001) from Ship to (Z002).
I checked in settings for OB20 transaction for display customer centrally, it is in Display mode as required and not suprresed would like your inputs as to why this is happening and what can be done to fix this.
Thanks and Regards
Mohammed Roshan

Hi ROshan,
Open customer master in XD02 sales view and save it then check in XD03 it should display the partner functions.
As you said the account group has been changed I think the records needs to be saved again.

Output determination does not happen during Sales Document creation

Hello All,
I am facing an issue where the automatic output determination does not happen when the Sales Order is created. Let me explain a bit on the background.
Output type ZDL2 has been defined as a special function (TNAPR-NACHA = 8) attached to a custom program and Form routine to create Outbound delivery after successful posting of the sales order.
Condition records are maintained to trigger this output for the Key Combination of Sales Org/Distrib Channel/Division/Route. Access sequence has also been correctly maintained for the above fields.
When the Sales order is saved, the output is supposed to be triggered but out of several sales orders created, it triggered for just one document. We have no clues on what could be the issue.
One question here is, can we have the access sequence maintained for the fields from both header and item level (ie KOMKBV1 and KOMPBV1). Please be reminded that, in our case, the field ROUTE comes from the field catalog KOMPBV1.
Another point which we noticed is that, the Function Module COMMUNICATION_AREA_KOMPBV1 which is supposed to fill the Item data Communication structure for output determination was never called.
Has anyone came across such situations. Comments or suggestions are really appreciated.
Kind Regards
Sabu Kuriakose

Sabu Kuriakose,
Since you are using ROUTE as one parameter for the condition table, and it is at the item level.
the output is triggered at the header level.
So a sales order can contain multiple items with different routes. so at header level how will u identify the route ?
the fields might be available for creatign the condition table but the problem is the fields should get the value during order processing.
in the analsysis screen you will know that the field is getting the value of the ROUTE or not ?
also for creating a delivery you need a shipping point. same as above you can hae multiple items with different shipping points. how will u consider that scenario.
If you can explain that, then that will be helpful to answer your problem.

Reclassification of Debit & Credit balances TC:-FAGLF101 is not happening

Hi
We are trying to run the transction FAGLF101 for reclassification of debit and credit balances
under one company we are have 4 company codes , we are able to post and generate entries for 3 company codes and not happening for one company code alone
we have checked the setting in OBBU/OBBV/OBBW all are correct, kindly let me know
1.Is there any particularly settings we have to make on company code basis ,
2.what all the config in need to check out
3. any config changes i need to make
kindly do the needful
thanks & regards
salva bindu

Hello Suresh
Could you help me with these questions on the configuration of valuation method assigned to valuation area:-
1. Significance of "determine exchange rate type from act bal" and "determine exchange rate type from invoice reference". How is exchange rate type determined at account balance? Is it that for regrouping of customer / vendor accounts it is required to detrmine exchange rate type from account balance?
2. What is the significance of valuation area in regrouping? Can i not use the same valuation method mapped to valuation area as configured for foreign currency valuation i.e EVR (standard SAP)?
3. What are the valuation method settings for US GAAP and IFRS for regrouping?
Thanks
Anisha

JWSDP1.5: wscompile error: "(should not happen): tie.generator.002

Hi all,
I'm working with a doc/lit webservice; I have a WSDL and I'm attempting to generate Java artefacts with wscompile. I'm using JWSDP1.5. I've had a range of errors (I'm updating an old WSDL for the Tentative Hold Protocol, see http://www.w3.org/TR/tenthold-2/). The latest, though, is problematic. The final error message is:
error: generator error: internal error (should not happen): tie.generator.002I have included the full output from wscompile at the end of this posting; I'll post the full WSDL in a reply. Any advice would be much appreciated!
Cheers,
--Tim West
Full output (from wscompile Ant task) - added linebreaks for readability
Buildfile: C:\common\eclipse-projects\thp\build.xml
wscompile-init:
ANEW-generate-server-binding:
[wscompile] command line: wscompile -d C:\common\eclipse-projects\thp\zant-build \
-features:documentliteral,wsi -g -gen:server -keep -verbose \
C:\common\eclipse-projects\thp\server-wscompile-config.xml -classpath (path omitted for readability)
[wscompile] [CustomClassGenerator: generating JavaClass for: userDefinedBody]
[wscompile] [CustomClassGenerator: generating JavaClass for: holdRequestHdr]
[wscompile] [CustomClassGenerator: generating JavaClass for: holdHeader]
[wscompile] [CustomClassGenerator: generating JavaClass for: holdRequestAckHdr]
[wscompile] [CustomClassGenerator: generating JavaClass for: holdModifyRequestHdr]
[wscompile] [CustomClassGenerator: generating JavaClass for: holdModifyResponseChoiceHdr]
[wscompile] [CustomClassGenerator: generating JavaClass for: holdModifyGrantHdr]
[wscompile] [CustomClassGenerator: generating JavaClass for: holdGrantHdr]
[wscompile] [CustomClassGenerator: generating JavaClass for: holdModifyDenialHdr]
[wscompile] [CustomClassGenerator: generating JavaClass for: holdDenialHdr]
[wscompile] [CustomClassGenerator: generating JavaClass for: holdCancellationRequestHdr]
[wscompile] [CustomClassGenerator: generating JavaClass for: holdCancellationResponseHdr]
[wscompile] [CustomClassGenerator: generating JavaClass for: holdStatusQueryHdr]
[wscompile] [CustomClassGenerator: generating JavaClass for: holdStatusResponseBody]
[wscompile] [CustomClassGenerator: generating JavaClass for: statusStructure]
[wscompile] [CustomClassGenerator: generating JavaClass for: holdStatusResponseHdr]
[wscompile] [LiteralObjectSerializerGenerator: writing serializer/deserializer for: userDefinedBody]
[wscompile] [LiteralObjectSerializerGenerator: writing serializer/deserializer for: holdHeader]
[wscompile] [LiteralObjectSerializerGenerator: writing serializer/deserializer for: holdRequestHdr]
[wscompile] [LiteralObjectSerializerGenerator: writing serializer/deserializer for: holdRequestAckHdr]
[wscompile] [LiteralObjectSerializerGenerator: writing serializer/deserializer for: holdModifyRequestHdr]
[wscompile] [LiteralObjectSerializerGenerator: writing serializer/deserializer for: holdGrantHdr]
[wscompile] [LiteralObjectSerializerGenerator: writing serializer/deserializer for: holdModifyGrantHdr]
[wscompile] [LiteralObjectSerializerGenerator: writing serializer/deserializer for: holdDenialHdr]
[wscompile] [LiteralObjectSerializerGenerator: writing serializer/deserializer for: holdModifyDenialHdr]
[wscompile] [LiteralObjectSerializerGenerator: writing serializer/deserializer for: holdModifyResponseChoiceHdr]
[wscompile] [LiteralObjectSerializerGenerator: writing serializer/deserializer for: holdCancellationRequestHdr]
[wscompile] [LiteralObjectSerializerGenerator: writing serializer/deserializer for: holdCancellationResponseHdr]
[wscompile] [LiteralObjectSerializerGenerator: writing serializer/deserializer for: holdStatusQueryHdr]
[wscompile] [LiteralObjectSerializerGenerator: writing serializer/deserializer for: statusStructure]
[wscompile] [LiteralObjectSerializerGenerator: writing serializer/deserializer for: holdStatusResponseBody]
[wscompile] [LiteralObjectSerializerGenerator: writing serializer/deserializer for: holdStatusResponseHdr]
[wscompile] error: generator error: internal error (should not happen): tie.generator.002
BUILD FAILED: C:\common\eclipse-projects\thp\build.xml:342: wscompile failed
Total time: 2 seconds

Hi again,
The offending WSDL is below. I should add that I Googled this and couldn't find anything useful. Axis is happy with the WSDL, as is the validator at http://www.soapclient.com/SoapTools.html (though I'm not sure of its quality). I'm now downloading IBM Websphere 6 to see how that goes.
Thanks again,
-Tim West
<?xml version="1.0" encoding="UTF-8"?>
<definitions
    name="TentativeHold"
    targetNamespace="http://www.w3.org/2001/08/thp/definitions"
    xmlns:tns="http://www.w3.org/2001/08/thp/definitions"
    xmlns:holdSchema="http://www.w3.org/2001/08/thp/schemas"
    xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
    xmlns="http://schemas.xmlsoap.org/wsdl/">
<types>
    <schema xmlns="http://www.w3.org/2001/XMLSchema"
        xmlns:holdSchema="http://www.w3.org/2001/08/thp/schemas"
        targetNamespace="http://www.w3.org/2001/08/thp/schemas">
      
      
      
      
      
      
      
      
      <complexType name="holdHeader">
        <sequence>
          <element name="holdID" type="int"/>
          <element name="customerID" type="string"/>
          <element name="replyTo" type="string"/>
          <element name="comment" type="string"/>
        </sequence>
      </complexType>
      
      
      
      
      
        
      <complexType name="userDefinedBody">
        <sequence>
          <element name="someRequestField" type="string"/>
        </sequence>
      </complexType>
      
      
      
      
      
      <complexType name="holdRequestHdr">
        <sequence>
          <element name="baseHeader" type="holdSchema:holdHeader"/>
        </sequence>
      </complexType>
      
      
      
      
      
      <complexType name="holdRequestAckHdr">
        <sequence>
          <element name="baseHeader" type="holdSchema:holdHeader"/>
          <element name="timeUntilResponse" type="duration"/>
        </sequence>
      </complexType>
      
      
      
      
      
      <complexType name="holdGrantHdr">
        <sequence>
          <element name="baseHeader" type="holdSchema:holdHeader"/>
          <element name="holdDuration" type="duration"/>
        </sequence>
      </complexType>
      
      
      
      
      
      <complexType name="holdDenialHdr">
        <sequence>
          <element name="baseHeader" type="holdSchema:holdHeader"/>
          <element name="reason" type="string"/>
        </sequence>
      </complexType>
      
      
      
      
      
      <complexType name="holdModifyRequestHdr">
        <sequence>
          <element name="modifiedHoldRequest" type="holdSchema:holdHeader"/>
        </sequence>
      </complexType>
      
      
      
      
      
      <complexType name="holdModifyGrantHdr">
        <sequence>
          <element name="modifiedHoldRequest" type="holdSchema:holdGrantHdr"/>
        </sequence>
      </complexType>
      
      
      
      
      
      <complexType name="holdModifyDenialHdr">
        <sequence>
          <element name="modifiedHoldRequest" type="holdSchema:holdDenialHdr"/>
        </sequence>
      </complexType>
      
      
      
      
      
      
      <complexType name="holdModifyResponseChoiceHdr">
        <sequence>
          <element name="grant" type="holdSchema:holdModifyGrantHdr"/>
          <element name="deny" type="holdSchema:holdModifyDenialHdr"/>
        </sequence>
      </complexType>
      
      
      
      
      
      <complexType name="holdCancellationRequestHdr">
        <sequence>
          <element name="customerHold" type="holdSchema:holdHeader"/>
          <element name="customerReason" type="string"/>
        </sequence>
      </complexType>
      
      
      
      
      
      <complexType name="holdCancellationResponseHdr">
        <sequence>
          <element name="customerHold" type="holdSchema:holdHeader"/>
        </sequence>
      </complexType>
      
      
      
      
      
      <complexType name="holdCancellationNotificationHdr">
        <sequence>
          <element name="customerHold" type="holdSchema:holdHeader"/>
          <element name="cancellationReason" type="string"/>
        </sequence>
      </complexType>
      
      
      
      
      
      <complexType name="holdStatusQueryHdr">
        <sequence>
          <element name="customerHold" type="holdSchema:holdHeader"/>
        </sequence>
      </complexType>
      
      
      
      
      
      <complexType name="holdStatusResponseHdr">
        <sequence>
          <element name="baseHeader" type="holdSchema:holdHeader"/>
        </sequence>
      </complexType>
      
      
      
      
      
      <complexType name="statusStructure">
        <sequence>
          <element name="itemHeader" type="holdSchema:holdHeader"/>
          <element name="holdState" type="string"/>
        </sequence>
      </complexType>
      
      
      
      
      
      
      <complexType name="holdStatusResponseBody">
        <sequence>
          <element name="holdItemsCount" type="int"/>
          <element name="itemList" type="holdSchema:statusStructure" minOccurs="0" maxOccurs="unbounded"/>
        </sequence>
      </complexType>
      
      
      
      
      
      
      <complexType name="holdError">
        <sequence>
          <element name="baseHeader" type="holdSchema:holdHeader"/>
          <element name="holdErrorType" type="int"/>
          <element name="holdErrorDesc" type="string"/>
        </sequence>
      </complexType>
      
      <element name="userDefinedBody" type="holdSchema:userDefinedBody"/>
      <element name="holdRequestHdr" type="holdSchema:holdRequestHdr"/>
      <element name="holdRequestAckHdr" type="holdSchema:holdRequestAckHdr"/>
      <element name="holdGrantHdr" type="holdSchema:holdGrantHdr"/>
      <element name="holdDenialHdr" type="holdSchema:holdDenialHdr"/>
      <element name="holdModifyRequestHdr" type="holdSchema:holdModifyRequestHdr"/>
      <element name="holdModifyGrantHdr" type="holdSchema:holdModifyGrantHdr"/>
      <element name="holdModifyDenialHdr" type="holdSchema:holdModifyDenialHdr"/>
      <element name="holdModifyResponseChoiceHdr" type="holdSchema:holdModifyResponseChoiceHdr"/>
      <element name="holdCancellationRequestHdr" type="holdSchema:holdCancellationRequestHdr"/>
      <element name="holdCancellationResponseHdr" type="holdSchema:holdCancellationResponseHdr"/>
      <element name="holdCancellationNotificationHdr" type="holdSchema:holdCancellationNotificationHdr"/>
      <element name="holdStatusQueryHdr" type="holdSchema:holdStatusQueryHdr"/>
      <element name="holdStatusResponseHdr" type="holdSchema:holdStatusResponseHdr"/>
      <element name="holdStatusResponseBody" type="holdSchema:holdStatusResponseBody"/>
      <element name="holdError" type="holdSchema:holdError"/>
    </schema>
</types>
<message name="HoldRequest">
    <part name="headerHoldRequest" element="holdSchema:holdRequestHdr"/>
    <part name="bodyHoldRequest" element="holdSchema:userDefinedBody"/>
</message>
<message name="HoldRequestAck">
    <part name="headerHoldRequestAck" element="holdSchema:holdRequestAckHdr"/>
    <part name="bodyHoldRequestAck" element="holdSchema:userDefinedBody"/>
</message>
<message name="HoldGrantResponse">
    <part name="headerHoldGrantResponse" element="holdSchema:holdGrantHdr"/>
    <part name="bodyHoldGrantResponse" element="holdSchema:userDefinedBody"/>
</message>
<message name="HoldDenialResponse">
    <part name="headerHoldDenialResponse" element="holdSchema:holdDenialHdr"/>
    <part name="bodyHoldDenialResponse" element="holdSchema:userDefinedBody"/>
</message>
<message name="HoldModifyRequest">
    <part name="headerHoldModifyRequest" element="holdSchema:holdModifyRequestHdr"/>
    <part name="bodyHoldModifyRequest" element="holdSchema:userDefinedBody"/>
</message>
<message name="HoldModifyResponse">
    <part name="headerHoldModifyResponse" element="holdSchema:holdModifyResponseChoiceHdr"/>
    <part name="bodyHoldModifyResponse" element="holdSchema:userDefinedBody"/>
</message>
<message name="HoldCancellationRequest">
    <part name="headerHoldCancellationRequest" element="holdSchema:holdCancellationRequestHdr"/>
    <part name="bodyHoldCancellationRequest" element="holdSchema:userDefinedBody"/>
</message>
<message name="HoldCancellationResponse">
    <part name="headerHoldCancellationResponse" element="holdSchema:holdCancellationResponseHdr"/>
    <part name="bodyHoldCancellationResponse" element="holdSchema:userDefinedBody"/>
</message>
<message name="HoldCancellationNotification">
    <part name="header" element="holdSchema:holdCancellationNotificationHdr"/>
    <part name="body" element="holdSchema:userDefinedBody"/>
</message>
<message name="HoldStatusQueryRequest">
    <part name="headerHoldStatusQueryRequest" element="holdSchema:holdStatusQueryHdr"/>
    <part name="bodyHoldStatusQueryRequest" element="holdSchema:userDefinedBody"/>
</message>
<message name="HoldStatusResponse">
    <part name="headerHoldStatusResponse" element="holdSchema:holdStatusResponseHdr"/>
    <part name="bodyHoldStatusResponse" element="holdSchema:holdStatusResponseBody"/>
</message>
<message name="HoldErrorResponse">
    
    <part name="bodyHoldErrorResponse" element="holdSchema:holdError"/>
</message>
<portType name="TentativeHoldServicePortType">
    <operation name="InitiateHold">
      <input message="tns:HoldRequest"/>
      <output message="tns:HoldRequestAck"/>
      
    </operation>
    <operation name="InitiateHoldModify">
      <input message="tns:HoldModifyRequest"/>
      <output message="tns:HoldModifyResponse"/>
      
    </operation>
    <operation name="InitiateHoldCancellation">
      <input message="tns:HoldCancellationRequest"/>
      <output message="tns:HoldCancellationResponse"/>
      
    </operation>
    <operation name="InitiateStatusQuery">
      <input message="tns:HoldStatusQueryRequest"/>
      <output message="tns:HoldStatusResponse"/>
      
    </operation>
</portType>
<portType name="TentativeHoldNotificationServicePortType">
    <operation name="NotifyHoldGranted">
      <output message="tns:HoldGrantResponse"/>
    </operation>
    <operation name="NotifyHoldDenied">
      <output message="tns:HoldDenialResponse"/>
    </operation>
    <operation name="NotifyServerHoldCancellation">
      <output message="tns:HoldCancellationNotification"/>
    </operation>
</portType>
<binding name="TentativeHoldSoapBinding" type="tns:TentativeHoldServicePortType">
    <soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document"/>
      <operation name="InitiateHold">
        <soap:operation soapAction="http://www.w3.org/2001/08/thp/InitiateHold"/>
        <input>
          <soap:body use="literal"/>
        </input>
        <output>
          <soap:body use="literal"/>
        </output>
        
      </operation>
      <operation name="InitiateHoldModify">
        <soap:operation soapAction="http://www.w3.org/2001/08/thp/InitiateHoldModify"/>
        <input>
          <soap:body use="literal"/>
        </input>
        <output>
          <soap:body use="literal"/>
        </output>
        
      </operation>
      <operation name="InitiateHoldCancellation">
        <soap:operation soapAction="http://www.w3.org/2001/08/thp/InitiateHoldCancellation"/>
        <input>
          <soap:body use="literal"/>
        </input>
        <output>
          <soap:body use="literal"/>
        </output>
        
      </operation>
      <operation name="InitiateStatusQuery">
        <soap:operation soapAction="http://www.w3.org/2001/08/thp/InitiateStatusQuery"/>
        <input>
          <soap:body use="literal"/>
        </input>
        <output>
          <soap:body use="literal"/>
        </output>
        
      </operation>
</binding>
<service name="TentativeHoldService">
    <documentation> Mythical Tentative Hold Web service</documentation>
    <port name="TentativeHoldPort" binding="tns:TentativeHoldSoapBinding">
      <soap:address location="http://xyz.com/tentativeHold/"/>
    </port>
</service>
<service name="TentativeHoldNotificationService">
    <port name="NotificationPort" binding="tns:TentativeHoldSoapBinding">
      <soap:address location="http://xyz.com/tentativeHoldNotification"/>
    </port>
</service>
</definitions>

Inspection plan with multiple specifications

I have to maintain 1 inspection plan for 2 vendors for incoming inspection.
Eg: Vendor A & B
Vendor A, I have to check parameter Fe, Mn, Si
Vendor B, I have to check parameters Fe, Moisture (For B, no need to check Mn, Si. Also Fe specification will vary for A and B vendors)
How can we do this in SAP. I cannot maintain 2 inspection plans.
Vineeth

Dear Vineeth
1) Dependent characteristic
For MIC 1000 - Vendor A specification 10 to 20, For Vendor B spec is 30 to 50
Suppose we receive 10 pc from vendor A , after GR inspection lot will be created from the 10 pc and the specification for MIC (1000) will be automaticaly assgined to the inspection lot ie 10 to 20. If the vendor was B then the specification would be 30 to 50.
In inspection lot there will be only one specificaton either it will be of Vendor A or that of B
2) In multiple specification is normaly used for Customer, country etc.
you have customer A , B , C & D with differnet specs for one single mic and you want to valuate the mic with all specification seperately at one time
In this multiple specification is used. here we can valuate the mic with all the specification of A, B , C & D and results in a seperate window in the result recording tab. accordingly you can check wehter the mic has passed as ok with all cusomter specification
Regards
Gajesh

Valuation of multiple specification is not happening

Similar Messages

Maybe you are looking for