Valuation Price issue in PR Approval form

Hi,
We have a PR with multiple line items and different valuation price.
But in the PR approval form, the valuation price is showing only the line item 1's valuation price, not
total valuation price of the all items.
Can any one help me how to show the valuation price as sum of the all line items values.
Thanks in advance
Rajeev

Dear Rajeev,
Please check in spro whether system is configured for Item level or Header level release.
check the tick sign at Release group.
For item level release system considers the value of line item and for header level release system takes the total value of line items.
please go through this link
https://www.sdn.sap.com/irj/scn/wiki?path=/display/erplo/releaseprocedureforPurchaseRequisitioninMM
Release procedure for Purchase Requisition in MM
Best regards,
Maverick
Edited by: Maverick 331 on Jun 16, 2009 7:34 PM

Similar Messages

Inter company PO is not pulling the valuation price from Material Master

Hi Experts,
We have a scenario, Inter-company PO with pricing procedure which pulls Material Price from Material Master (Std Price), similar to intra company PO
Even after maintaining the std price in the supplying plant , system is not pulling the Valuation price from Material master only for a particular Material
I checked the Plant level attributes ( for ex: Plant Mat status, client level status and everything looks fine )
Could you guys please mention what would be the issue ?
Thanks in advance
Illayaraja

Hi,
Is there a routine which pulls the value? then you need debug with ABAP help for that routine where its failing to pull
Thanks
Diwakar

Valuation price with user exit/BADI/Enhancement Spot (In valuation variant)

Hi all,
i am facing problem finding enhancement when creation of sales order of Valuation price with user exit/BADI/Enhancement Spot (In valuation variant)
For refferenece:
When going to t.code VA03, select one item and go to extras in the menu bar and select costing then you find some amounts calculation i.e valuation price automatically.
So when creation of sales order i am giving material and that material price automatically takes from material master and creating sales order.
My customer requirement is to get the valuation price of the input material from Z-table during the sales order cost estimate.
This Z-table contains the material code, plant , grade of the material.
Ex:
Material         Plant   Grade Price
A                1000    XYZ     25000
A                1000    PQR     35000
A                1000    BCD     45000
Suppose it depends on sales document type and which grade price i have to take.
So first of all i am unable to find enhancement where to change this code to get change the valuation price.
Does anybody have any idea , is there any user exit/BADI/enhancement for this.
So please help me in this issue.
Thanks & Regards,
lokeshgoud

pls allow me to post the questions

In which field is the current valuation price (FIFO) stored?

We need the current valuation price of FIFO-related items
Previously, the valuation price was stored in oitm.avgprice or oitw.avgprice. In the current version these fields are not filled.
How can you determine the current price of a FIFO-related item?
Valuation Price = (sum of single FIFO prices of the items in stock) : (inventory)
A similar problem occurs with charge-off. So far, the total booking price was stored in ige1.stocksum, but in SAP8.8 it is not. For a recalculation we need the value actually posted at the item level. This is the reason why the price cannot be determined from the posting journal jdt1, because there, a sum of all entries calculated.
Is there a reliable way, which works with both SAP2007 and SAP8.8?
regards
M.Heigl

Hello János
Thanks a lot for your advice, this helps me to advance
Unfortunately, the calcprice is not filled correctly.
Example:
Number of decimals in Price = 2
Posting in 1 piece
Factor = 1000 (1000 pc are posted),
Total price 0.05 u20AC,
Single Price = 0.00005,
now in oitm.calcprice is stored : 0, in oinm.openvalue=0.05u20AC, in the jounrnal (jdt1) 0.05u20AC
Alternatively, the field u201Copenvalueu201D may be used?
To get out the correct average inventory value, the following SQL statement would be correct:
select sum (openvalue / openqty) from where oinm itemcode = N'test_fifo 'and openqty! = 0
At charge off, the total value is determined via
select sum (-1 * transvalue) from where oinm transtype=60 and createdby=164 and itemcode = N'test_fifo'
In this test, I have also found an error:
If the single price (oinm.calcprice) = 0, for example because it was posted with a large factor, the item cannot be issued anymore.
Error message "acquisition price" is missing (...)
Tested with 2007ASP1PL9 and SAP 8.8 (8.80.230) SP0PL12
I assume that for FIFO evaluation SAP uses the calcprice and not the total price, the single price is determined, which in this case is 0 because of rounding.
Apart from this error: Are my assumptions and SQL statements correct?
Regards,

Report Custom Valuation Price on Material

Hi
I want to have a custom valuation price for material.
I have Load Valuation Price in ODS.
Now I want This Values (Valuation Price) available in every level of drill down (Characteristic).
Which is the best way to do that?

Dear Gordon,
Thanks for your resonance, basically my requirement is at the time of issue materials from stock, Material cost should be calculated based up on invoice price, not based on MAP or Standard price.
Thanks
Venkat

Valuation price with user Exit on activity types

Hi All,
Our customer could have different activity cost for different products even if they are processed on the same cost center, same activity type and same activity time. So I wonder whether SAP has valuation price with user Exit on activity types as what on material valuation, when we select "U" in the relevant valuation variant. Could anyone knows advise please?
Regards
Walter

Hi Walter,
an idea might be to include an ABC template into the costing. ABC tempaltes allow a big degree of freedom in determinin which processes to use and in which quantities. To use the product as a cost driver is certainly not an issue. I doubt that you can directly influence the process 'price' to be applied, but to change the quantity could bring the same result.
See the docu for more info:
[http://help.sap.com/saphelp_erp60_sp/helpdata/en/7e/cb7d1443a311d189ee0000e81ddfac/frameset.htm]
best regards,
Udo

Valuation price cant be changed in PR

Hi,
after creating an Purchase Requisition we like to grant the possibility to change the valuation price.
However, once the PR is created and is in the process of getting released we have no chance to change that field in ME52N. I already checked many authorizations (also by tracing) but could find any. But if I assign SAP_ALL the valuation price becomes changeable.
Any Idea what could be the solution to my problem,
regards
Torsten

Frist check your customizing setting for the relevant Field Selection
Keys in transaction OMF2 step by step and carefully, please do not
miss the Keys special for text item or sevice item.
For help to find the relevant keys, please see attached note 30316.
The possible reason of such system behavior is indicator 'Purchase order
price' (EBAN-BPUEB). Please see note 603630 for more information.
You have to assign/maintain the correct authorizations for your users.
(Parameter id EFB)
Hope above information could help to solve the issue.

Approval Form Display as ITS Service

Hi,
I have been using SAP 4.7 which has external ITS.I am workflow consulatant.We have been implementing ESS for Customer.I have a customized workflow were an Approval form has to be sent to manager.The approval form has to be displayed as an service.Normally we use form for approval in r/3.
Please help me in this issue.Its urgent

Hi,
The issue is solved with note 1228297.
Thanks,
Manuel

Defaulting valuation price in Purchase requisition(ME51N)

Hi SDN's,
Can you tell me how to default valuation price in Purchase requisition (Tcode ME51N)? Right now it is defaulting the standard price, we need to default the valuation price with the Planned Price instead of standard price. How to achieve this.
We found the user-exit, but it is not permitting to change the default valuation price. Is there any other method to achieve this.
Thanks in advance.
Regards,
Rahul

Hi Deepa,
Plz follow the below steps to make sure alternative UOM to work:
1. In the material master record, maintain the alternative UOM that you wish to
    use, with conversion factor, in Units of Measure tab under additional
    data.
2. Then, in the purchasing view, maintain the indicator 1 - Active for the field,
    Var. OUnit,
3 .Maintain the UOM conversion and and also activate the variable order unit in
    the corresponding inforecord.
Let me know if you have any issue.
Reward if it works.
Thanks,
PNR.

Valuation Price for Material not updating in ME5J

Dear All,
I am getting one problem.
If PR is created from Project while assigning material to activity it is not getting updated in ME5J.
For service activities, value of service PR is getting updated in ME5J.
Table EBKN having Field-NETWR-Netprice which is updating in Service PR but not in the case of Material.
Table EBAN having Field-PREIS-Valuation price which is updating in for the case of material as well as pervice.
Our Report for PR ME5J having filed NETWR which is updating in case of service only.
How to see value of Material also in ME5J?
It is critical issue and any input will be helpful for me to resolve the issue.
Thanks & Regards,
Sukhveer.

Hi Krishnendu,
Thanks for the reply , FI document is not getting generated.
What could be the reason for it, as before it was working fine.
Thanks
Vivek Varun

Valuation Price in Stock Transport purchase requisition

Hello All,
We have a scenario in which we create intercompany STPR i.e between two plants belonging to different company codes.
Plant X - Material A - with standard price as 100 AUD
Plant Y - Material A - with standard price as 102 KRW
If plant X creates STPR on Plant then under the valuation tab it shows the price as 102 KRW i.e for supplying plant. Could you please help to understand why it takes the price from the supplying plant material master and not from the receiving plant material master ? Due to this my release strategy and other things get disturbed.
Thanks and Regards,
Deepak Gupta

Hi,
Please see the below scenario. It will clear your doubts:
The account movements that result from a cross-company-code stock transport order with billing document can be seen from the following example:
Plant 0002 orders 10 kg of a material from plant 0001. The following prices apply:
Valuation price of material (plant 0001): 10 $/kg
Price for intercompany billing (plant 0001): 12 $/kg
Order price (plant 0002): 11 $/kg
The following postings are made for the individual transactions
Plant        Transaction      Value     Account
0001     Goods issue      100 -     Stock account
                                    100 +     Change involving stocks
0001     Billing              120 -      Sales revenue account
                                    120 +      Customer account
0002     Goods receipt       110 -     GR/IR clearing
                                     110 +     Stock account
0002     Invoice receipt        120 -     Vendor account
                                     110 +     GR/IR clearing
                                      10 +     Price difference account or stock account
Regards,
Atal
Edited by: atal sharma on Oct 16, 2011 12:10 AM
The billing will be done as per the price in the receiving plant.
Refer this link http://help.sap.com/saphelp_erp60_sp/helpdata/en/4d/4b9036dfe4b703e10000009b38f889/frameset.htm

Valuation price for STO Purchase Requisition

Hi Gurus,
How do system fetches the Valuation price in case of STO purchase Requisitions. The prices is no doubt picked from material master but I suppose it picks the price from Supplying plant's material master price. Pls throw some light on the issue.
Regards
Shashidhar

Hi.
I suppose, it is picking from Receiving plant material master.
Please let me know if you need further in put on this.
Hope this helps.

Valuation Price Change in Purchase Requisition

Hello,
I have a business requirement to go for financial approval at the purchase requisition stage. However many purchase requsisitions will be created from work orders via plant maintanence. For work orders created in this way the valuation price on a purchase requisition is greyed out.
I need to be able to change this price per business requirement. Any input or help would be greatly appreciated.

Hi
For the the approval there is release strategy in purchase requistion ( with classifiaction .You can make use of this to put the approval .Now coming to ur Purchase requistion which are cretaed thru Mainatnace odere you need to cjheck the Field status for the document there you will the field valution price i just forgot the field status group.
you can try this way
regards
sunny

Time - based valuation price according to price control

Dear All,
Please let me know the impact of using Time - based valuation price according to price control in Strategy Sequence in valuation variants (OKK4)
As i try to put Time - based valuation price according to price control in priority 1 and remove other priority but system is still picking moving price maintain in Material master.
Regards
Shayam

Dear All,
Any input on this issue.
Regards
Shayam

How can we get the Latest Resource Assigned in the Approval Form

I was wondering if there is any way to get the Latest Assigned Resources to a User in my Approval Form.
I tried this <ref>waveset.resourceAssignments</ref> but it returned all the Resources assigned to a User. While creating a User with Resource Assigned it won�t be problem. While Update when a User is assigned a Resource & it comes for Approval to the owner, all the Previously assigned resources shows up. How can I get only the Latest Resource Assigned.
Can anyone provide some hints on this..

idm_guy, if you could elaborate more on what you mean with latest resource assigned it would help - but there are a number of options (if i interprent you correctly to solvethis). My guess is that the easiest way would be to determine if:
waveset.accounts[<iterate through resources>].created = true or false
and if
waveset.accounts[<resource>].lastPasswordUpdate = <last updated date>
The latter is of course only applicable to resource where you set a password. This value will be updated whenever you set the password and could be a possible value to check against.
If the account is not created yet but assigned it might be another possibility to check, but again - clairfy a bit about what you mean with "Latest Resource Assigned".
/Anders

Valuation Price issue in PR Approval form

Similar Messages

Maybe you are looking for