Valuation type change to existing stock

Dear SAP friends,
   Is there any possibility to change Stock of one valuation type to another valuation type.
For example I want to change Raw material imported  stock to Raw material Indigenous ( Domestic).
Any answers will be appreciated.
Ram

Hi,
In this case you can use Tr. Code MMAM but provided the below conditions.
There should not be any stock for both materials(zero stock)
There should not be any pending PO's, PR's etc, for both materials.
Then try with Tr. code. MMAM.
Thanks and Regards,
Nagaraj

Similar Messages

  • Currency/Valuation type does not exist

    Hi,
    I am parking the documents through transaction FBV1 using a journal entry custom program.The documents are getting parked succesfully. I can see the documents in transaction FBV0.  I am explicitly providing the values for local currency/group currency in the upload file.
    But the issue here is when I try to post these documents, I get the error "Currency/Valuation type does not exist ".
    Please suggest how to avoid this error and post the documents successfully.
    Thanks,
    Ravindra

    Hi,
    You need look into the setting for the Plant in OMWC t-code
    OSS note 941082
    Regards,
    R.Brahmankar

  • Valuation type change

    Dear Gurus,
    I have a query.
    we purchase the FG from vendor by sending SFG to them.( subcontracting ) FG is subjected to split valuation.
    When take GR of the FG it is placed in quality inspection stock. Then after quality check we want to change the valuation type of the FG. Can this be achieved?
    Or i will have to enter the valuatin type while MIGO (GR) itself?
    Thanks

    Hi,
    After quality inspection, you keep the stock in the same val type. Then do transfer posting to another material with split valuation and batch using 309 mvt type and transfer the stock.
    Now your material will not have stock and open POs. Now you can change valuation type and make tranfer posting again using 309 mvt and create new batch and save.
    Please check it out.
    Regards
    Ram

  • Valuation type change in goods receipts

    Dear Experts,
    We are creating the stock transfer through out bound delivery.
    In out bound delivery we are changing the valuation type.. But while creating the GR system is asking the old valuation  type which is present in the PO.
    We want new valuation type in the GR.
    Flow is as -
    PO with valuation type- outbound delivery( in this val type is changed)- Then GR ( wrf PO)
    please suggest.
    Thank you in advance.

    Hi,
    During GR system will not allow to change valuation type. since ur doing GR wrt to PO, u need to change it in PO only.
    One more option u need to try it out is ,
    create inbound delivery wrt PO and see u can change it in inbound delivery if u dont want to change it in PO, then u can do GR wrt inbound delivery.

  • Valuation type in case of stock transport order

    Hi,
    We are spilt valuation.
    now we are doing stock transport order and it is asking for valuation type. while we dont want to enter valuation type in STO.
    as which material is to sent to plant, we know at that time of delivery.
    but during making STO system is asking for 'enter valuation  type'.
    How we can do the same.
    Regards,
    Santosh

    Hi,
    Since you have activated the split valuation for the material system is asking to enter the valuation type.
    Check the material master Accounting 1 view whether you have maintained valuation category?
    If you want Split valuation, maintain the valuation type in config settings in IMG & extend the material to the respective valuation type.
    Hope it helps.
    Thanks & Regards,

  • MSC2N - Accounting document is not created for valuation type change

    Dear All,
    I am trying to change valuation type in MSC2N. system is not generating accoutning document. It suppose to create a accounting document with 340 movement type.
    Please help
    R.S

    As said,
               I guess, you have given incorrect Tx code. MSC2N neither generates accounting documents nor you are able to enter any mov type.
            You need re-check your post & update
    Regards,
    Reazuddin MD
    Sorry , incorrect assumption.
    Just now checked,
    movement type 340 can be used in Tx:MSC2N. Will explore more & try to provide input.

  • Type change of existing step is not reflected in Type window

    If I add a step to a sequence, that step's type def (and an EditSubstep type def) appear in the Step Types section of the Types window for the sequence file.  But if in the sequence I change the Type of the step (in the General panel of the Properties tab for the step), the change doesn't get reflected in the Type window (the original type def is still there).  In fact, I can now delete the type definition (which should be legal since it is no longer in use by the sequence) and the EditSubstep type definition, leaving the Step Types section blank.
    This seems like a TestStand bug.  Everything else seems to behave fine, but is this likely to cause some sort of corruption down the line?

    This does appear to be a bug. I will add it to our tracking database.
    It's unlikely to cause any problems (which is probably why it's gone unnoticed for so long) because the types involved are also loaded by type palette files so they will still be in the global type list as long as those type palette files are loaded (which is usually for the life of the process). Also, when you save the file, the types that are actually used by the file will get added to the file's type usage list automatically if they weren't there already. You can see this if you save the file after doing what you've said, then go back to the type palette view for the file (NOTE: You will need to select a different file and then re-select the file to force the view to refresh if the file in question was already selected in the type palette's view).
    Because a user can programmatically edit a sequence file and might forget to or not know to call TypeUsageList.AddUsedTypes() when adding instances of previously unused types, this is somewhat of an expected case that TestStand tries to handle.
    Hope this helps. Let me know if you have any additional questions regarding this.
    -Doug

  • Material with different Valuation types in WM Stock status

    Hi
    If we are maintaining stocks of different valuation types in a Plant , and the Storage Location in the Plant is Warehouse Managed,  then how can we see the stocks in different valuation types in the Warehouse stock?
    thanks
    Raj

    Hi Keerthan,
    It will not be possible to change or add valuation type after the material movement is performed for the material. Only option is to create new materials.
    In case if the materials are not involved in any material movement, then you can change valuation type. Best thing will be executing via LSMW.
    Regards
    Terence

  • Change existing stock items from Non-Batch to Batch Management Method

    Hi,
    Any prerequisites before changing the existing stock items from Non-Batch to Batch Management method which have On hand stock qty? Please advise.
    Thanks & Regards,
    Priscilla

    Hi
    You can change the method only when, available Qty becomes zero.
    OR
    you can do one workaround :
    Make Goods Issue of that Item and take value of stock in any GL,
    and then change the method of that item, then make Goods Reciept by using that GL which was used in Goods Issue.
    Regards
    Manoj S

  • Error:storage location for material's valuation type does not exit

    create physical inventory document for material , it has a error message "Storage location X105 for material 0004AA00 plant 1151 valuation type **** does not exist", MMSC is ok, so i don't know what question?

    Hi Yan,
    If no previous goods movements have been posted yet for the combination  of the relevant material, plant, storage location and valuation type  the physical inventory cannot be done.                                                                               
    The table MCHB is used for both batch managed materials and materials  with split valuation. You can only create a physical inventory document for a material with   split valuation when both, a MARD and a MCHB segment are available.              
    When you create a valuation type in the material master, only the table  MBEW is updated - an entry is not created in the table MCHB. This is needed however to perform a physical inventory for this material.                
    This MCHB segment is created when you perform a goods receipt for the material, but (like with batches) a physical inventory posting cannot   create this entry in the table.                                                                               
    You will need to create a material posting for these materials if you wish to create a physical inventory for them. On the other hand, please,    consider that it is not necessary to create a physical inventory for those materials which have not suffered any goods movement at all.                                                                               
    If you want to make a physical inventory for a material valuated separately, you have to proceed as follows:                                                                               
    - make a goods receipt (561)==> then the stock segment will be created           
    - make the reversal of the goods receipt                                         
    - make the inventory.      
    Hope this can help
    Regards,
    Mauro

  • Valuation Type Error

    Dear Frndz,
    I have to create a PO for a material against a vendor. In my Material master I have given H (Orgin)  as my valuation category. I have assigned valuation types(which includes my vendor also) for this Valuation category. Now when I create a PR for this material  when I enter the valuation type assigned for this
    valuation category. System is showin an error 'valuation Data for material X,valuation type Y doesnt exist.'
    So please guide me abt how to maintain the same & further please provide me some details abt the split valuation concept as well as what are all the steps involved in configuring & testing the same.
    Thanks in advance!
    Rgds,
    SAP FC

    Hi,
    Check this Link for details:
    http://www.sap123.com/showthread.php?t=29
    Note:
    The Split Valuation settings are as follow:
    1.SPRO> MM>VALN AND ACC ASSIGNMENT> SPLIT VALUATION> Acitvate Split Valuation
    2.SPRO> MM>VALN AND ACC ASSIGNMENT> SPLIT VALUATION> Configure Split Valuation
    Click on Golbal type: create your own valuation types as Type 1, Type 2 etc
    Click on Global categories:create your own Valuation Category as Type(T) and
    Activate all valuation types(Type1, Type2 ) for your category(T)
    Goto MM01, enter materialu2026u2026u2026u20261st enter valuation category and save & again enter MM01 enter the Valuation type as Type 1 and maintain price for it and repeat the same for all the Types.
    When you create a PO for split valuated material it will ask for valuation type and you can enter your required valuation type and save.
    Regards,
    Biju K

  • Change of Valuation Class for the existing material

    Hello,
    I am facing the issue while trying to change the valuation class of the existing material.
    The material type is 'NLAG' which is non stockable material. However, all the PO are account assigned to the G/L account & cost center. Hence there is no stock of the material exists to any plant/ SLOC.
    There is no open PO/ schedule lines/ Production orders are exists for the material. Also there is no stock exists at any plant.  Even then system is throwing the message as 'The valuation class cannot be changed' (Message no. M3 368).
    After debugging could see that it fetch the PO that are logically closed (has GR, IR, vendor payment has been made). 
    We do not want to have the split valuation for that material.
    The material is in existance for quite a long time, so could you please help me to change the valuation class?
    Thanks in advance,
    Samip Patil.

    Hi Raju,
    To resolve SAP error message M3 368 I would suggest that you refer to SAP note number 1967543. This note outlines the issue and a resolution to it:
    Please have a look at the description of the error M3 368. This error may occur if one or more of the following already exist for the material:
    1. Valuated stocks in the current period or in the previous period
    2. Open purchase orders or delivery schedule lines
    3. Production orders for which a goods movement has already taken place
    Resolution:
    If you have valuated stocks in the current period or in the previous period, you will get message "Stocks already exist.". You have to clear all the stocks both in current period and previous period. Please have a look at SAP Note 30656, it shows an example on how to clear the stocks in
    previous period. You can use transaction MIGO to execute this step.
    If you have open purchase orders or delivery schedule lines, you will get message "Purchase orders already exist.". You can find related purchase orders after you click 'Display Error' button. Please delete them in transaction ME22N.
    If you have production orders for which a goods movement has already taken place, you will get message "Production orders already exist.". Please archive these production orders. You need to set deletion flag for these orders firstly and go to SARA, use archiving object PP_ORDER to archive
    these orders.
    Kind regards,
    James

  • How can we change the valuation type for a material created.

    How can we change the valuation type for a material created.
    Note : All open orders are closed for this material.3
    Please guide

    Hi,
    You can change valuation class, or you can set valuation category for your material master. If valuation category is set you can extend your material master and in this way creating records for different valuation types.
    Please try to set the desired changes in your mmr (MM02) > save > SAP will give you error message > push 'Display error' button and you will see what conditions must be eliminated to carry out the change.
    - you are not allowed to have open transactional data
    - no stock in the current and previous period (using proper posting date in MB1A + 201 you can reduce your stock level to 0, and after that you can set it back by MB1A + 202)
    - in case of valuation category setting batch archiving may be necessary
    BR
    Csaba

  • Valuation type Not Exist for Material

    Dear Experts
    Whenever i  Doing Manual posting of GR/IR through MR11 And In that case some of them Material is Showing the Error No Valuatiuon Type  Exist for the Material.
    No valuation type exists for material
    Rgds
    Pankaj Agarwal

    CKMLGRIR024
    Short Text
    No valuation type exists for material &
    Diagnosis
    You are trying to post to material  (). This material is subject to split valuation according to valuation type (valuation type = ). It was not possible to determine a valuation type for the posted operations.
    System Response
    The posting will not be accepted as a valuation type can not be found.
    Procedure
    Check which valuation type the GR/IR clearing account maintenance should post the balance to. The valuation type must be created before the GR/IR clearing account maintenance posting is made.
    You can either:
    *Post the goods receipt with reference to this order, enter the valuation type and then execute the GR/IR clearing account maintenance again.
    or
    Reverse the Invoice(s) that have led to this balance in the GR/IR account.*

  • Change valuation type in MIGO

    HI Everyone,
    While creating a GR with reference to PO it peak up the valuation type field bwtar from the EKPO table normally. In my scenario i'm getting BWTAR from table LIPS. I have used a BADI(MB_MIGO_BADI).
    But now when i post the goods in migo transaction it throws an error saying 'Material document data and PO data do not match (Valuation Type)' . That means it re-checks the entry from the PO which is different from the value which we got from LIPS and throws the error.
    The movement type is 101 for outbound delivery.
    The requirement is to allow the entry with different valuation type as that in PO.
    Could this be achieved?
    Any help would be great.
    Thanks & Regards,
    Satyam Bhardwaj

    It is not possible to change the valuation type in MIGO. Instead I restricted the user at the time of GI to enter different valuation type. If the valuation type he entered during GI is different than that in PO, i ammend the PO at database level and also note that mcha table also needs to be updated with same valuation type.
    Thanks for your replies.
    Regards,
    Satyam

Maybe you are looking for