Valuation type is not defined for delivery item 000010 (help me)

hi
    when i  post goods issue in delivery it is  giving error "Valuation type is not defined for delivery item 000010"
even i have assigned material to valuation class and valuation category , but till it is giving error . plz helm  out

Hi,
you need to assign proper G/L accounts in OBYC for your plant/gen modification key/valuation class
Go to your material master..check the accounting view.See whats the valuation class.
Now go to OBYC - GBB
here for the combination of your plant & modification key VAX, VAY & VKA & your valuation class give the resepective G/L accounts.
this should solve your problem.
thanks

Similar Messages

  • Goods Issue error - batches not defined for delivery item

    Hi,
    We are getting a Goods Issue error  u201CThe batches are not defined for delivery item 000010u201D.   We are only getting this error for a material that is being shipped against a particular third party sales scheduling agreement.  We went live in 2007 and we had no issues, but when we had to create a new Sched Agreement this year, for third party sales, we started to get this error.  However, if we re-activate the old scheduling agreement we do not get the error.  We have a batch job that executes the following steps:
    1.     VL06IG (collective goods receipt)
    2.     VL10 (collective delivery)
    3.     VL06O (collective GI)
    We have compared the 2 scheduling agreements and see no difference.  We are assuming it has something to do with how the scheduling agreement was setup, but are not sure.  Any suggestions on how to correct this problem would be much appreciated.
    Thanks in advance,
    Helen

    Dear Murali,
    The material has not changed at all.  I'm not sure what you mean by maintaining batches while receipt of the material.
    If I re-open the old scheduling agreement, we do not get the error message.  However, as soon as we use the new SD scheduling agreement, we get the error.  We are using the same material master on both scheduling agreements.
    Thanks,
    Helen

  • Item category RENN is not defined for this item

    Hey SD experts,
    I've created a sales order with free of charge and standard items.
    Now, I'm trying to create a return order with reference to this sales order.
    I got this error message: Item category RENN is not defined for this item.
    I've checked in VOV4 : the combination Sales document type + Itemcategory group =>Itemcategory seems to be correct.
    Why am I getting this error message then ?
    Regards,
    Bahia.

    Dear Bahia,
    Check item level copy control settings between Sales order free of charge and Return sales order i.e copy control settings between free of charge order item category and returns order itemcategory.
    Once again check item category determination through VOV4 transaction for the combination of
    Your returns order document type+Itemcategory group-->RENN.
    I hope this will help you,
    Regards,
    Murali.

  • How to make valuation type field not changeable  in delivery tab of PO

    Hai friends,
                    I am new to badis..please guide me to solve the issue...
    how to make valuation type field not changeable  in delivery tab of PO...
    The field shd be in display mode only ...actually...there  a badi has been used before
    to get valuation type from a ztable depending on material and plant...
    Now ..my requirement is that the user shd not change the default value brought from the ztable...

    Hi SRINIVAS,
    You can achieve this from BADI only if BADI is allows you to do this. You cannot achieve everything from a BADI. Check if there is any expoting field in the methods that can be ticked for making the field in display mode. If not then you cannot achieve this from BADI.
    The field you want to default to display is a standard or zfield. If z, then you can changethe attribute of the screen field to Output only.
    Regards,
    Manish

  • Message no. V1321 - Item category ALES is not defined for this item

    Hi,
    I am trying to use ALES - Item Category for creation of the Sales Order. But i am getting this eerror message as Item category ALES is not defined for this item. Please let me know the config changes that i need to do to use this Item Category.
    Thanks in Advance !!

    To maintain the item category for a sales order type first you have to assign the item category in SPRO.
    SPRO>Sales & Distribution>Sales>Sales Documents>Sales Document Item>Assign item categories.
    In the screen Change view Item category assignement:overview screen
    select your sales document type + ItemcategorygroupUsageHigherLevel Item category
    Then you have to maintain Default item category and Manual item category.
    Default item category will be proposed by the system when you enter a material in sales order. You can change the item category to any one of the manual item category maintained above.
    For e.g.: You are creating a thrid party sales order. Default item category is TAN, if manual item category is maintained as TAS for this combination of sales document type + ItemcategorygroupUsageHigherLevel Item category and then system will allow you to change item category to TAS. If this is not maintained then system will give you an error as"Item category TAS is not defined for this item".
    Again depending the item category further acitivites will be carried in SAP, like in third party item (TAS) PR screen will be displayed.
    Thanks,
    Sarvesh Desai
    Edited by: Sarvesh DeSai on Jan 11, 2012 7:08 AM

  • 'Item category SUBC is not defined for this item'

    Hi,
    When i tried to create an SO with item category SUBC, the system pop-up this error msg: 'Item cateogry SUBC is not defined for this item'
    Please let me know what should i do?  Thank you.
    I've maintained the item category assignment with same item category group maintained in material master data..But it still not work...

    Dear Laa,
    This is due to not done the itemcategory definition and determination.So
    First you define the itemcategory  SUBC through VOV7 transaction (By copying standard TAN)
    Then do the itemcategory determination through VOV4 transaction for this combination
    Sales document type+Itemcategory group--->Itemcategory
    Itemcategory group is different from itemcategory.
    Itemcategory group maintained in the Material master data
    The item categroy will get determine in the sales order based on Sales document type+Itemcategory group
    I hope this will help you,
    Regards,
    Murali.

  • ERROR in MIRO : An exchange rate type is not defined for country IN

    Experts:
    When I try to enter the invoice received from the vendor, I am getting the following message.
    An exchange rate type is not defined for country IN
    Message no. FF802
    Can anyone provide me a solution for this?
    Thanks,
    Vijai

    This is the explanation given in note 974619 for the above error message
    Summary
    Symptom
    When you post an FI document, the system issues error message FF 801 or FF 802.
    Other terms
    Plants abroad, FF 801, FF802
    Reason and Prerequisites
    You use the 'Plants abroad' function.
    See Note 882132 for more information about this.
    Solution
    If the 'Plants abroad' function is active, additional fields appear when you maintain the country global parameters (transaction OY01, table T005):
    - Country currency       (Field WAERS)
    - Exchange rate type     (Field KURST)
    - Net discount base      (Field XSKFN)
    - Net tax base           (Field XMWSN)
    You must maintain the fields 'Country currency' and 'Exchange rate type'.
    Otherwise, the system issues error message FF 801 or FF 802.
    thanks
    G. Lakshmipathi

  • Error in RFx : Item type 'Service' not allowed for this Item

    hi , experts,
      We use SRM7.0 in Standalone scenario .
      i get an error when i transfer SC to RFx :     Line 0001: Item type 'Service' not allowed for this Item .
    if someone kindly tell me how to correct this Error.
      another question is ,in the Standalone scenario , can we create Service Master with multiple level(hierarchy) use Tcode 'COMMPR01 ' ?
       reagrds
               claud

    Hi Claud,
    SRM does not support hierarchy in service for operational documents like PO, contract, confirmation and invoice in SRM 7. It does support hierarchy in service only for RFx doucments. You need to activate the hierarchy template for SRM for that.
    Thanks and regards,
    Ranjan

  • Item Conversion to GMD YIELD TYPE does not exist for  the item/items in this Recipe/Batch.

    Item Conversion to GMD YIELD TYPE does not exist for  the item/items in this Recipe/Batch. Cannot
    scale/create batch.
    While auto shipping the above error i am getting. Please somebody help on this.
    Thanks.

    Hi,
    Could you please let us know which Oracle Product was installed and it complete 5 digit version.
    Regards,
    Prakash.

  • Sales document type is not defined for(sales org/division/distribution chan

    Hi Friends,
    I am getting the error that sales document type is not defined for x/y/z(sales organisation/division/distribution channel). while creating sales order.
    Any pointers will be rewarded.
    Regards

    Hi there,
    When you define a sales doc type in VOV8, you also should assign that to the sales area SA (sales org / dist channel / division).
    Only then you will be log a sales order for a sales area.
    Check if you have done it. You will find it in SPRO --> Sales & Distribution --> Sales --> Sales doc header --> Assign sales doc type to SA.
    Regards,
    Sivanand

  • Item category IRIN is not defined for this material

    Hi,
    When creating Sales Order, I assign a service material with Material Type DIEN , System gives me error as
    "Item category IRIN is not defined for this item."
    I want to know where and how is the link between Item Category and Material is maintained
    Thanks in advance.
    Regards,
    Nitin

    hi
    i am not a expert , based on my knowledge system will determine the item category for line item , based on  vov4 , here you will give the
    sales document typeitem category groupusage+higher level item= default item category
                  or                +            leis               +  sein  + enter over item= irin
    this is for determination ,
    in the material master  you will check the item category group , sale view tab 1, 2,  and also basic data.
    based on this will take , line item , item category . so sales view and basic data view item category group are same , other wise system sows this is error message ,
    please check this
    regards
    sankar

  • Exchange rate type not defined for country

    Hi All,
    I have noticed an error message during testing of postings using tax codes. The error message nbr is FF802 (Exchange rate type is not defined for country XX). When we are testing postings on accounts for which tax code is ignored (not relevant) it is ok. Could you please let me know where exactly we have settings and how it is related to the tax codes ? I have never seen that connection previously.
    Thanks,
    Points will be rewarded afterwards.
    Tomasz

    Hi Tomasz,
    The exchange rate types are defined at country level in General Settings and the company codes with that country can access that. Normally the exchange rate types are defined as M, P, B and G. M is for average rate and is used in FI,  while P is for planning in CO.
    Regd
    Bharat

  • With hoding Tax type is not defined while running he TDS inconsistency

    Dear Experts
    While running the TDS inconsistency program (RFWT0010) for a vendor group ranging from 1 to zzzzzzzzzzz in company code , I am getting an error that "Withholding tax type is not defined".
    Can anybody please help me how to solve this issue.
    Thanks in advance.
    Points will be awraded.
    Regards.
    skpatra

    Hello Surendra,
    For TDS calculation WHT Code and Type are plays a major role in TDS.
    In your case, you are not defined wht type in your system without this how system calculates tds. So, you should create type and code and assigned the same to concerned vendor master. For wht type path is
    Spro>FA>****>wht>ewht>calculation>wht type for paymentj and inovice posting
    If you want to more on this pl feel free to ask us
    Thanks
    Para

  • LSMW Sales unit ****** 1 is not defined for item 000000 2

    Hi, all,
    I am trying to create order using LSMW with
    Object 0090 Sales documents
    Method 0000
    Program Name RVINVB10
    Program Type D Direct Input
    The issue is at the Sales Unit.
    I prepared the unit as PC in the folloiwng 3 fields
    ZIEME      Target quantity UoM
    VRKME      Sales unit
    MEINS      Base Unit of Measure
    But get the following error, any thoughts?
                                   Start of processing
                                   V1                   384
    Sales unit ****** 1 is not defined for item 000000 2
    Data from this document has not been saved ***

    Alright Koffer,
    I'll give U the place, from where this error can occur, check which is applicable to you:
    1) In FV45PF0M_MARM_SELECT, after calling the FM MATERIAL_READ.
    2) In Include, FV45PF0V_VBAP-UMVKZ_ERMITTELN, after calling the FM : MATERIAL_UNIT_CONVERSION.
    3) In Include FV45PF0V_VBAP-VRKME_PRUEFEN, after material unit conversion.
    4) In Incl. FV45PFAP_VBAP_FUELLEN_MAAPV, after call to the FM : F4_ALLOWED_QUANTITY_UNIT.
    If U understand German( Ich Keine Deutsch lernen ), U might go to these programs and check the description.
    However, all these point to the Sales Unit as U already know.. check all the data related to the Sales Unit and whether this unit is allowed for the material being used.
    Rgds,
    Raghu.

  • Exception '1003' is not defined for method 'SENDTASKDESCRIPTION' object type 'SELFITEM'

    Hi All,
    Please help me in this. I am trying to send a mail when user rejected the item in his inbox. I am getting error like
    Exception '1003' is not defined for method 'SENDTASKDESCRIPTION' object type 'SELFITEM'. I tried so  many ways like no attachments,send express ,siganture,encryption all disabled but still the same error from user outbox who ever rejects it.
    Regards,
    Madhu.

    Hi Madhu,
    This exception is raised means you have checked the Signature check-box  and encrypt check box.
    Now you have unchecked that the issue should be solved , but if it is still giving the same exception synchronize your run time buffer using the t-code SWU_OBUF .
    Let me know if the issue is still there.
    Regards
    Bikas

Maybe you are looking for