Valuation type while creating BOM

Hello Experts,
My requirement is that, I should be able to select valuation type of material in BOM. Please let me know, if there any setting where I can enter valuation type, while creating BOM.
We have two valuation types for my raw material - Local and Import. When we execute standard cost estimate, system picks up value appearing in material master (without valuation type). This value is average of both the valuation types. So we want that system should pick up valuation type, mentioned in BOM.
=
Deepak

Hello Deepak,
In go to CS01/CS02 select the line item and go to item overview and in that in the customer fields tab you can maintain the valuation type.
If customer field not available then with help of the user exit ''PCSD0002'' you add the customer filed in item.
It's not standard process, you have to do the development
I hope this information helpful to you,
Regards
Umesh Mali

Similar Messages

  • What are the sources system will pick the document type while creating invo

    hi
    I would like to know how system will pickup the doucment type while creating invoice in vf01.
    i have taken off the fields  f1, f2, from the document type. in billing sub tab.  so  The moment when am creating billing system automatically displaying F2 invoice doucment creation.  What are the sources for this.
    thanks & Regards
    Rack129

    Hi,
    Hope you have maintained u2018Delivery relevant billing type F2u2019 and u2018Order relevant billing type F1u2019 in the billing tab of the Sales document type in VOV8.
    If you create delivery related billing, the system will pick F2. This is controlled in Item category (VOV7). Billing relevance in Business data of Item category decides whether this is delivery related or order related. u2018Au2019 for delivery related billing; u2018Bu2019 for order related billing and so on.
    Item category is determined by this combination: Sales document type + Item cat group + usage + higher level item cat.
    Regards,
    K Bharathi

  • How to change the document type while creating a PO by ME59N

    Hi,
    I  have 2 groups of PR's, for group one the document type is picked as NB and PO is created and for the group 2 it should pick as XYZ and PO should be created using ME59N tcode.
    How to change the document type for group 2 in ME59N? Which user exists to use to change the document type while creating PO in ME59N? 
    Can any one suggest me.

    Hi,
    There a config area, where you can define default PO doc types for a particular Pr doc type. If you maintain the settings properly there, then your requirement can be fulfilled.
    SPRO->IMG->MM->Purchasing->Purchase requisation->Define doc types.
    This will serve your purpose.
    Thanks,
    Srinu

  • Jpr adapter not showing in adapter type while creating communication channe

    Hi all,
    I got error in JPR adapter type.Due to that its displaying in adapter type while creating communication channel.I checked in RWB in communication channel monitoring its showing
    Error getting JPR configuration from SLD. Exception: No entity of class SAP_BusinessSystem for EXI.SystemHome.hexsap found
    No access to get JPR configuration
    How to solve this issue,
    Regards
    Vijay

    Thanks guys for the response..
    I checked the IR and the SAP Basis has been added. Here are the details I got.
    Name:     SAP_BASIS
    Version:  700
    SWCV:     SAP BASIS 7.00
    Available Support Packages:  12
    Any more suggesions/feedback will be greatly appreciated.
    Thanks

  • SAP REx 3.2 Predefined list of activities for visit type while creating visit on iPad

    Colleagues, our customer wants to have a different predefined list of activities for different visit types while creating a visit on iPad. I have seen such functionality in SAP Demo for REx 3.2 on iPad. Could you tell me what I should do to have such functionality?

    Hello Viktor,
    There are no REx customisation available to mainatin the set of activities that can be assigned to a visit.
    In the REx iPAD & iPhone solution, all the surveys, journals and activities are shown together as activities.
    For example in the first screenshot provided by you, for the newly created visit the activities shown plannogram check, trade assets, store sales performance and promotion compliance are the surveys and journals assigned to the CRM transaction type of the REx visit Business Review. We can assign activities which are customised in the SPRO path mentioned by me in the previous post. In the device when we go to the details of the visits and activities then we can see that the surveys and journals assigned to these activities are grouped seperatly.
    So if want only specific activities (in iPAD & iPhone surveys and journals are activities) to be available for a visit then we should set the CRM customisation for surveys and journals accordingly.
    Regards
    Pramod

  • Exit/badi to restrict output types while creating PO

    Hi,
    Please let me know how to suppress output types while creating/saving a PO. I need to find an exit/badi where I can get all the output types with status vstat = 0. Before saving the PO, I need to manipulate the nast records/output types, so that only PO will be processed successfully for those output types which I need.
    Please help me on this...
    Regards,
    Vikram.

    Hi Vikram,
    Output types are normally handled in configuration. In the configuration you can determine which output types are valid for the object in question and for the function (create or change).
    Also in the configuration you will be able to maintain requirements (coding), i.e. specifiy conditions when an output type should be surpressed or not ->Tx OMFT.
    Discuss this with your MM consultant.
    KInd regards,
    Robert

  • BOM not exploding for CR doc. type while creating sales order.

    Hi Experts,
    I have a problem in BOM. When created the BOM with sales doc. type OR, then BOM exploding as usual and picking pricing for main item.. But when I tried for sales doc. type CR, then the BOM is not being exploding and also pricing is also not picking. Can any one help me for this problem.
    Thanks in advance,
    Raksha.

    Hi,
    Go to VTAF billing to sales document copy control and check below settings:
    Header:
    Data Transfer -052 Billing doc header  
    Data Transfer Buis - 103 Billing bus header data
    Data Transfer Part - Billing Header Partner
    Copying requirements - 021 Billing Header
    Check Copy item number
    Uncheck complete reference
    Item:
    Item Cat proposal G2N Request
    Item TAN - Standard item
    Data Transfer -153 item from Billing doc
    Data Transfer Buis - 104 Billing bus Item data
    Data Transfer Part - 004 Billing Item Partner
    bl.pl - Leave it blank
    Copying requirements - 303 Billing Header
    uncheck copy schedule lines and do not copy batch
    check update document flow
    Pricing type - D
    Leave blank - Campaign Deter.
    Points to add: If you create without reference to an invoice then it would not explode BOM in RE return order because the configuration not set in REN item category.
    As a standard business process return orders always create with reference to invoice.
    regards
    rc gopi

  • Error while creating BOM

    Hi
    iam facing error while creating, changing and display BOM.
    Error: Status MHCO of the user interface SAPLCSDI missing.
    rgads

    Dear,
    MHCO - BOM item screen GUI status..Are you using any Alternative item?
    Have you applied any new patch in the system?
    Contact ABAPer, can give more details
    In SAP service place serach for this interface program,,,you will get many notes on this.

  • Error while creating BOM using BAPI 'BAPI_BOM_UPLOAD_SAVE'

    Hi All,
    We are getting an error as 'Data is incomplete' while trying to create BoM using the bapi 'BAPI_BOM_UPLOAD_SAVE', if the item contains Item category as 'T'. But for other item category like 'L' or 'N', the bapi is sucessfull.
    The values that we pass to fill the item category 'T' are operation, item_cat, bom_itm_no, COMPON_QTY, FIXED_QTY as 'X', UNMEAS as 'ST', ITEM_TEXT1 and ITEM_TEXT2.
    Anyone who has faced same problem or has a solution to the problem, kindly provide a solution.
    Regards,
    Vijay

    The error you receive is because of different config for different Item Categories. Find out from the functional team what fields have they kept mandatory for the item category 'T'. You may not be passing one of those fields in the BAPI.
    Try creating a BOM manually for item category 'T' and you may figure our which field you are missing.

  • Error while creating BOM with FM CSAP_MAT_BOM_MAINTAIN

    Hi All,
    While creating the bom with the FM "CSAP_MAT_BOM_MAINTAIN" using change number i am getting the below error message.
    " Processing of this object is not supported with change number."
    Please help me out.
    Regards
    Suresh

    call function 'CSAP_MAT_BOM_MAINTAIN'
      exporting
        material                 = material
        plant                    = plant
        bom_usage                = usage
        alternative              = alternat
        valid_from               = y_date
    *   CHANGE_NO                =                   "<----Have u used this field for creating ?
    *   REVISION_LEVEL           =
        i_stko                   = l_stko
    *   FL_NO_CHANGE_DOC         = ' '
        fl_commit_and_wait       = 'X'
        fl_bom_create            = 'X'
        fl_new_item              = ' '
        fl_complete              = ' '
    * IMPORTING
    *   FL_WARNING               =
    *   O_STKO                   =
    CSAP_MAT_BOM_CREATE would be an ideal one for creation and CSAP_MAT_BOM_MAINTAIN for change
    Regards,
    Mithun Shetty.

  • Valuation Area while creating PR

    Hi,
    While creating PR(directly), I am getting error as "valuation area are not defined". How to solve this error?
    With Regards,
    jaheer

    HI
    I think valuation area has not been maintained go to IMG enterprise structure-logisticsgenerak-definition check for the valuation level , if its defined go to its assignment part and assign that to your area,.
    Hope this helps.
    Regards
    Vignesh

  • RESTRICT USER FROM USING SAME REQUIREMENT TYPE  WHILE CREATING SALES ORDER

    Hi Friends,
    I Have a requirement to in SD while creating any sales order i want the system sholud throw a error
    message when i am using line items having same requirement type more than one time
    i have tried some customer exits v45a0001 & v45a0003 . but was not successfull .
    kindly somebody help me with elaborated steps  .
    thanks in advance  .
    regards
    digvijay rai

    no reply and i am to close this thread so i am putting it as answered ;(

  • Automatic Selection of Default Valuation Type while GI

    Dear SD Gurus,
    Our company is having split valuation. I am having issue while doing Goods Issue. It is mandatory to enter valuation type of material before goods issue is posted.
    My users wants default valuation type to come in when material is having only one valuation type. Actually users does not want to enter the valuation type all the times when material has only one valuation type so that should come as a default value.
    Is there any way to achieve the same?
    Thanks.
    Warm regards,
    Rahul Mishra

    Hi,
    This can be possible by maintaining data transfer routines in VOFM for deliveries.Check with your ABAPER to develop the default valuation type routine for deliveries.
    Hari Challa.

  • Change Base unit of measurment while creating BOM-CS01

    Dear Experts,
    Base UoM in material master is in Metric Tonne "MT",While Creating the BOM of the Material My Base qunatity is also in MT by default but I want to change Base Uom to in KiloLiter "KL".But system is not allowing to change.
    In system there are many Transactions iof material in current period.
    Please suggest as it is in production server.
    Thanks,
    GBS

    Hi ,
    We are Using User Exists,
    If Production Order Header material's unit of entry is not same as base UOM then system will check conversion ratio maintained in material master-->additional data.
    Convert quantity in UOE to quantity in Base UOM for Header material i.e.101 movement.
    Calculate componenet quantity (261 movement) as per bom.
    Calculate 95% of component quantity for lower tolerance limit
    Calculate 105% of component quantity for upper tolerance limit
    If component quantity entered against 261 movement is not within lower and upper tolerance then system will give error message and will restrict to post entry.
    This for information part.But still my question is how can alt. Uom of Measurment can be used while creation of BOM instead of Base Uom at header level.
    GBS

  • Change in document type while creating billing document from sales order

    While creating billing document from Sales order it is creating with document type RV which is standerd one but i want to change Document type.
    How can i change it?
    Regards
    Raj

    Hi
    If you use another existing document type, check that it has a number range suitable to you.  Else create a new 'z' type and assign an entirely new number range, not used in the other doc types.
    It is useful to make the FI document number the same number.  If I understand from the forums, the FI number range must be external.  Search the forum for this.  It is very useful for the Finance people.
    Kind regards
    Dawn
    Edited by: Dawn Verrell on Sep 9, 2010 4:10 PM

Maybe you are looking for