ValuationType(VT) Auto Picked at GRN after keeping the VT filed blank at PO

Dear Gurus,
I need to trace my FOC items seperately.
For that i am using split valuation and created a valuation type as FOC.
I have created a PO for the same material in two line items. One with valuation type blank and other with valuation type FOC. When i do GRN, system automatically pic the valuation type as FOC for both line items.
Cant i trace the normal stocks without a valuation type?
Do i need to craete 02 valuation types as NORMAL and FOC?
Why does the system pick the FOC valuation type automatically even the PO valuation type is blank?
Please guide
Regds,
Nalindar
Edited by: Nalinda Ratnayaka on Dec 3, 2010 1:26 PM

Hi,
1)If you want to use same material with using split valuation, you should create two valuation type with NORMAL & FOC.
2)System picks default valuation type -FOC, because you have only one valution type for material.
3) Alternatively you can create other material code with material type-UNBW (Non -Valuated material).
I hope you got all answers.
YB

Similar Messages

  • Requirement of keeping the Path field BLANK of HTTP_AAE Channel in NW PO 7.31

    Hi ,
    We are in a phase of migrating Interfaces from PI 7.1 to PO 7.31(Java Only).
    For one of the Interface in PI 7.1 there is a RFC Destination for vendor communication through HTTPS connectivity  :
    Target-Host: IP Address
    Post: value
    Path Prefix: Blank
    During migration  requirement is to keep the Path field BLANK of the Communication Channel,however since  PO has mandatory path field   a "/" is been provided, because of which data post fails.
    PI:  https://IP:9443
    PO:  https://IP:9443/  (Since Path Prefix is mandatory)
    As per my understanding The data is supposed to be posted directly to the IP (https://IP:9443) however it is getting posted to (https://IP:9443/) where the service is not available.  For reference have attached relevant screenshots.
    Is there any way to provide Blank value,omit the Path Field of HTTP_AAE Receiver adapter. Need ardent support and suggestions
    regarding this.

    Komal,
    I tried the regular expression on my system which is PI 7.30 SP 8 Patch Level 45. And it worked for me.
    I have used a simple check for alphabets.
    Regards
    Abhishek

  • How to archive my photos from IPhoto to keep the same filing structure

    I need to empty my iphoto files as there is too much memory being taken up.  i want to export to external hard drive but keep the same filing system so i can access my photos rapidly.  every attempt I have made to date mixes all the photos up so there is no structure. help please.

    I need to empty my iphoto files as there is too much memory being taken up.
    No, iPhoto files take up disk space, not memory. So if you think you're going to save memory be getting rid of them, you need to reconsider that idea.
    You can move your entire iPhoto Library to an external drive and import new photos into it on that drive, so if that's what you want to do, these are the steps:
    1. Format the external drive as Mac OS Extended (Journaled)
    2. Quit iPhoto
    3. Copy the iPhoto Library from your Pictures Folder to the External Disk.
    4. Hold down the option key while launching iPhoto. From the menu select 'Choose Library' and navigate to the new location. From that point on itl be the default location of your library.
    5. Test the new library destination and when you're sure everything is as it should be, delete it on your Macintosh HD.

  • Auto Drag-and-Drop after execute the exteral program

    I execute a program and provide the pathname.
    The external program support Drag-and-Drop and also Open files by clicking Menu.
    I have to open file after executing the program.
    Is it possible to do that?

    >
    What actually happens when you browse to a file of type 'TS video' (e.g. using Windows Explorer) and double click on it?>It* opens in VLC media player here, my default player for AVI's.
    >
    Does it open in the 'software that find the TV station information'?
    If not, it probably means that filetype is not 'associated' with that program. If that is the case, it will not work using the Desktop class (as I understand the Desktop class).
    What happens when you try to Desktop.browse(URI) to the video?>
    >
    [http://lmc4b5b.com/temp_stop/123322113213.avi] >
    * this file..
    >
    It seems to be no response.....>That seemed odd, since Desktop.browse() throws a whole mess of exceptions if it cannot do what you ask for. This is the output I got here, for both browse() and open().
    Exception in thread "main" java.io.IOException:
      Failed to open file:/C:/.../123322113213.avi.
      Error message: The parameter is incorrect.
      at sun.awt.windows.WDesktopPeer.ShellExecute(WDesktopPeer.java:59)
      at sun.awt.windows.WDesktopPeer.open(WDesktopPeer.java:36)
      at java.awt.Desktop.open(Desktop.java:254)
    ...So - I was wrong in thinking any double clickable file would open in the correct program using Desktop. That is a pity.
    On a side noted, related to exec().
    Can you ..
    a) launch the program from the command line?
    b) launch the program form the command line, specifying a file to work with?
    e.g.
    C:>program path/to/the.avi
    If so, why not simply add the file name as an argument to exec()? Or indeed (since I notice you are willing to use 1.6) swap the 'exec()' for ProcessBuilder - introduced in 1.5.

  • Php web site problem - after loding the web site  blank white page

    Hi Guys
    i've set up Mac server with 10.6.2 its running 3 web sites . the problem is when i upload the web files in to my Mac server and start to browsing from my laptop via internet, web site is not loading. So i upload the sample web page just as a simple html file. its working fine , But when i upload this php web site problem agin . problem : site is loading from loading bar, But i can not see anything from browser just white page , no page source nothing ......
    any suggestions ?

    This is the Error from Server Admin
    ing: date(): It is not safe to rely on the system's timezone settings. You are required to use the date.timezone setting or the datedefault_timezoneset() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Berlin' for 'CEST/2.0/DST' instead in /Library/WebServer/Documents/kortxpress/libraries/joomla/utilities/date.php on line 184
    [Mon Apr 12 14:51:38 2010] [error] [client 91.127.146.71] PHP Notice: A session had already been started - ignoring session_start() in /Library/WebServer/Documents/discard/config.php on line 2
    [Mon Apr 12 14:51:38 2010] [error] [client 91.127.146.71] PHP Warning: require_once(/Library/WebServer/Documents/discardclasses/mysql/DBConnection.php ): failed to open stream: No such file or directory in /Library/WebServer/Documents/discard/index.php on line 5
    [Mon Apr 12 14:51:38 2010] [error] [client 91.127.146.71] PHP Fatal error: require_once(): Failed opening required '/Library/WebServer/Documents/discardclasses/mysql/DBConnection.php' (include_path='.:/usr/lib/php') in /Library/WebServer/Documents/discard/index.php on line 5
    [Mon Apr 12 14:51:41 2010] [error] [client 91.127.146.71] PHP Notice: A session had already been started - ignoring session_start() in /Library/WebServer/Documents/discard/config.php on line 2
    [Mon Apr 12 14:51:41 2010] [error] [client 91.127.146.71] PHP Warning: require_once(/Library/WebServer/Documents/discardclasses/mysql/DBConnection.php ): failed to open stream: No such file or directory in /Library/WebServer/Documents/discard/index.php on line 5
    [Mon Apr 12 14:51:41 2010] [error] [client 91.127.146.71] PHP Fatal error: require_once(): Failed opening required '/Library/WebServer/Documents/discardclasses/mysql/DBConnection.php' (include_path='.:/usr/lib/php') in /Library/WebServer/Documents/discard/index.php on line 5
    [Mon Apr 12 14:51:42 2010] [error] [client 91.127.146.71] PHP Notice: A session had already been started - ignoring session_start() in /Library/WebServer/Documents/discard/config.php on line 2
    [Mon Apr 12 14:51:42 2010] [error] [client 91.127.146.71] PHP Warning: require_once(/Library/WebServer/Documents/discardclasses/mysql/DBConnection.php ): failed to open stream: No such file or directory in /Library/WebServer/Documents/discard/index.php on line 5
    [Mon Apr 12 14:51:42 2010] [error] [client 91.127.146.71] PHP Fatal error: require_once(): Failed opening required '/Library/WebServer/Documents/discardclasses/mysql/DBConnection.php' (include_path='.:/usr/lib/php') in /Library/WebServer/Documents/discard/index.php on line 5
    [Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Deprecated: Assigning the return value of new by reference is deprecated in /Library/WebServer/Documents/kortxpress/administrator/components/com_joomfish/c lasses/JoomfishManager.class.php on line 184
    [Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Deprecated: Assigning the return value of new by reference is deprecated in /Library/WebServer/Documents/kortxpress/administrator/components/com_joomfish/c lasses/JoomfishManager.class.php on line 193
    [Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Deprecated: Assigning the return value of new by reference is deprecated in /Library/WebServer/Documents/kortxpress/administrator/components/com_joomfish/c lasses/JoomfishManager.class.php on line 217
    [Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Deprecated: Assigning the return value of new by reference is deprecated in /Library/WebServer/Documents/kortxpress/administrator/components/com_joomfish/c lasses/JoomfishManager.class.php on line 226
    [Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Deprecated: Function eregi() is deprecated in /Library/WebServer/Documents/kortxpress/plugins/system/jfrouter.php on line 188
    [Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Deprecated: Function split() is deprecated in /Library/WebServer/Documents/kortxpress/plugins/system/jfrouter.php on line 189
    [Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Warning: strtotime(): It is not safe to rely on the system's timezone settings. You are required to use the date.timezone setting or the datedefault_timezoneset() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Berlin' for 'CEST/2.0/DST' instead in /Library/WebServer/Documents/kortxpress/libraries/joomla/utilities/date.php on line 56
    [Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Warning: date(): It is not safe to rely on the system's timezone settings. You are required to use the date.timezone setting or the datedefault_timezoneset() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Berlin' for 'CEST/2.0/DST' instead in /Library/WebServer/Documents/kortxpress/libraries/joomla/utilities/date.php on line 198
    [Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Warning: date(): It is not safe to rely on the system's timezone settings. You are required to use the date.timezone setting or the datedefault_timezoneset() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Berlin' for 'CEST/2.0/DST' instead in /Library/WebServer/Documents/kortxpress/libraries/joomla/utilities/date.php on line 198
    [Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Deprecated: Function split() is deprecated in /Library/WebServer/Documents/kortxpress/plugins/system/jfrouter.php on line 594
    [Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Deprecated: Function split() is deprecated in /Library/WebServer/Documents/kortxpress/plugins/system/jfrouter.php on line 594
    [Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Warning: copy(/Library/WebServer/Documents/kortxpress/modules/mod_jlivechat/livechat-onl ine.jpg): failed to open stream: No such file or directory in /Library/WebServer/Documents/kortxpress/modules/mod_jlivechat/helper.php on line 47
    [Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Warning: copy(/Library/WebServer/Documents/kortxpress/modules/mod_jlivechat/livechat-off line.jpg): failed to open stream: No such file or directory in /Library/WebServer/Documents/kortxpress/modules/mod_jlivechat/helper.php on line 52
    [Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Warning: copy(/Library/WebServer/Documents/kortxpress/modules/mod_jlivechat/livechat-lar ge-online.jpg): failed to open stream: No such file or directory in /Library/WebServer/Documents/kortxpress/modules/mod_jlivechat/helper.php on line 57
    [Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Warning: copy(/Library/WebServer/Documents/kortxpress/modules/mod_jlivechat/livechat-lar ge-offline.jpg): failed to open stream: No such file or directory in /Library/WebServer/Documents/kortxpress/modules/mod_jlivechat/helper.php on line 62
    [Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Deprecated: Function split() is deprecated in /Library/WebServer/Documents/kortxpress/plugins/system/jfrouter.php on line 594
    [Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Deprecated: Function split() is deprecated in /Library/WebServer/Documents/kortxpress/plugins/system/jfrouter.php on line 594
    [Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Deprecated: Function split() is deprecated in /Library/WebServer/Documents/kortxpress/plugins/system/jfrouter.php on line 594
    [Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Deprecated: Function split() is deprecated in /Library/WebServer/Documents/kortxpress/plugins/system/jfrouter.php on line 594
    [Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Deprecated: Function split() is deprecated in /Library/WebServer/Documents/kortxpress/plugins/system/jfrouter.php on line 594
    [Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Deprecated: Function split() is deprecated in /Library/WebServer/Documents/kortxpress/plugins/system/jfrouter.php on line 594
    [Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Deprecated: Function split() is deprecated in /Library/WebServer/Documents/kortxpress/plugins/system/jfrouter.php on line 594
    [Mon Apr 12 14:57:23 2010] [notice] caught SIGTERM, shutting down
    [Mon Apr 12 14:57:56 2010] [warn] module php5_module is already loaded, skipping
    [Mon Apr 12 14:57:57 2010] [notice] Apache/2.2.13 (Unix) PHP/5.3.0 configured -- resuming normal operations
    [Mon Apr 12 14:58:46 2010] [error] [client 91.127.146.71] PHP Notice: A session had already been started - ignoring session_start() in /Library/WebServer/Documents/discard/config.php on line 2
    [Mon Apr 12 14:58:46 2010] [error] [client 91.127.146.71] PHP Warning: require_once(/Library/WebServer/Documents/discardclasses/mysql/DBConnection.php ): failed to open stream: No such file or directory in /Library/WebServer/Documents/discard/index.php on line 5
    [Mon Apr 12 14:58:46 2010] [error] [client 91.127.146.71] PHP Fatal error: require_once(): Failed opening required '/Library/WebServer/Documents/discardclasses/mysql/DBConnection.php' (include_path='.:/usr/lib/php') in /Library/WebServer/Documents/discard/index.php on line 5
    [Mon Apr 12 14:58:48 2010] [error] [client 91.127.146.71] PHP Notice: A session had already been started - ignoring session_start() in /Library/WebServer/Documents/discard/config.php on line 2
    [Mon Apr 12 14:58:48 2010] [error] [client 91.127.146.71] PHP Warning: require_once(/Library/WebServer/Documents/discardclasses/mysql/DBConnection.php ): failed to open stream: No such file or directory in /Library/WebServer/Documents/discard/index.php on line 5
    [Mon Apr 12 14:58:48 2010] [error] [client 91.127.146.71] PHP Fatal error: require_once(): Failed opening required '/Library/WebServer/Documents/discardclasses/mysql/DBConnection.php' (include_path='.:/usr/lib/php') in /Library/WebServer/Documents/discard/index.php on line 5

  • Is there a way to keep the Nano from auto shutting off?

    This is probably a weird question because it doesn't really involve a problem per se. I am a drummer in a band. I am using my iPod 1 GB Nano to play an intro during our live shows and also play segways between songs because it is more reliable than a laptop. Basically each of my sound clips are in their own playlist so that once the clip ends it stops and doesn't go to the next song and I'm not trying stop it while I'm also playing the drums. But within a minute or so of finishing the sound clip the Nano shuts off. When I turn it back on it causes a small popping sound in the PA (which is undesireable). I'm wondering if there is a way to keep the iPOD from shutting off automatically. I haven't been able to find any settings that allow me to prevent it from auto shut off. Any suggestions? And just to clarify, it is not shutting off while playing the sound clip, but usually a minute or so after. So It's not like it is malfunctioning. But there must be some way to keep it from shutting off automatically.
    Nano   Windows XP  
    Nano   Windows XP  

    Hi Jarame,
    Welcome to Apple Discussions
    Try putting your iPod on Hold. You might want to look at Knowledge Base Document #60951 and Knowledge Base Document #60945 goes over The iPods Different Sleep Modes.
    Jon

  • How do I keep the screen light from going out after a few seconds

    How do I keep the screen light from going out after a few seconds on my iphone

    Settings>General>Auto-Lock

  • Restrict Output type at the time of Picking and Print after PGI

    Hi All....
    My business requirement is to restirct certain Output types such as LD00, LD0F etc. at the time of Picking and Batch determination and to print after PGI.
    These output types are triggered Automatically via Batch job scheduled via third party tool. All the complete Delivery process is Auto.
    Once Sales order is created the below process takes place.
    Auto Delivery
    Auto Shipment
    Auto Picking and Batch determination (Now in this step I need to restrict)
    PGI (Manually vai some custom program)
    Once the Picking is done all the Output types appear in Delivery Header output which are processed with a Dispatch time of 4. (Appeared as Green tarrif.)
    For the Output type LD00 -> 911 routine is added .
    This routine is triggering at the time of Picking and Batch determination.
    At this Point of  Picking I can restirct the output type by using the Routine that not to display in Delivery Header,  but iam not able to retrieve again at the time of PGI. Is there any option  to get the data of Output type at the time of PGI.
    Or is there any option for LD00 output type to dynamically select the Routine Number to trigger at the time of PGI. ( If I use Routine no 1 it will trigger at the time of PGI, but I cannot change especially for this purpose since this output type is used for multiple purposes)
    Pls provide me the solution.

    Hi Brad
    I can copy the code from routine #1 into my routine #911 inorder to restirct the display of output type in delivery header. But as mentioned by you this routine is not triggered at the time of PGI. ( I checked at the time of PGI )
    If i link my output type LD00 with Requirement #1 routine then it will be triggered at the time of PGI, but here the o/p is linked with Requirement #911.
    Pls let me know if any thing wrong i mentioned...

  • LOV filter - Auto Submit not working after the value is made to VS.filter

    JDeveloper 11.1.1.4.0
    I have cascading LOV filters for a table with fields id, deptid, projectName. The filters are for deptid and projectName. When I select a deptid, the projectNames belonging to that deptid should be populated. I have set Auto submit for deptid filter and partial trigger for project Name. So if I select a deptid and when I navigate to Project Name filter I get the list of project Names in the Project LOV filter.This worked fine as long as I didnt change the value for LOV to Vs.filtercriteria.deptid. Once I changed it the LOV filter for Project Names only got refreshed once I hit ENTER key after changing the value of Deptid. But I have to keep the value for LOV to Vs.filtercriteria.deptid. Other wise the records in the table after applying the filter values didnt function properly. I dont know whether the AutoSubmit does not work when the value is changed to Vs.filtercriteria.deptid

    duplicate post.
    Frank

  • My iPod nano will go into the sleep mode while a song is playing a second after the screen goes blank; the song will stop and I will then have to press the sleep/awake button to pick up where the song left off.  How do I fix this?

    My iPod nano will go into the sleep mode while a song is playing a second after the screen goes blank; the song will stop and I will then have to press the sleep/awake button to pick up where the song left off.  How do I fix this?

    Your problem is that your iPod is not sensing that your headset is inserted. There is a pin inside the headphone port on the Nano that senses if it is inserted fully. If it does not sense anything, it will pause playback to save battery power when the screen dims. Here are the solutions:
    Insert it fully. This will fix it for most of you. Press that thing in there all the way. You should feel and hear a full click when it is fully seated. If you can see ANY silver of the headset jack, it is not fully inserted.
    Debris inside the headset port. If you are totally unable to push the headset jack all the way, the most likely problem is that you have crud inside your headphone jack. Try blowing it out or slapping it against your palm with the headset port facing your palm to try and get the stuff out. If you look into he jack with a light, you should be able to see to the bottom. The entire inside of the headset port is white, so if it looks dark at the bottom, that is the crud that is keeping your nano from working.
    Headset jack or plug issue. If you cannot solve the problem with 1 or 2, then there is likely something physically wrong with either the headset jack on your headphones or the headset port on the nano.
    If none of the above works, you need to take it to the Apple store or wherever you purchased it. I think they are still under warranty.
    i

  • Is it wise to keep the Nikon camera files "DSC's"  after downloading them and converting to DNG files via Adobe converter for lightroom use. In other words do the DNG files have all the raw data I would ever need in processing or should I save the camera'

    Is it wise to keep the Nikon camera files "DSC's"  after downloading them and converting to DNG files via Adobe converter for lightroom use. In other words do the DNG files have all the raw data I would ever need in processing or should I save the camera's DSC files?

    DNG files do not contain some metadata supplied by the camera, which can be used by the manufacturer's software. Thus, if you don't keep the original Raw photo, you will lose this information.
    If your 1000% sure you're never going to use the manufacturer's software, then this isn't a problem. But who can be sure what software you will be using 10 years from now?

  • My iPhoto keeps crashing after installing the latest update, can't do anything!

    My iPhoto keeps crashing after installing the latest update, can't do anything! It used to crash when importing but now I'm at the point where I open the software and after 2 seconds it crashes (nothing connected either). What to do? Can't access any photos

    Try this:  launch iPhoto with the Option key held down and create a new, test library.  Import some photos and check to see if the same problem persists. If you can create a new library and import some test photos then the problem lies with your original library. 
    If that's the case make a temporary, backup copy (if you don't already have a backup copy) of the library and apply the two fixes below in order as needed:
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Select the options identified in the screenshot. 
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download iPhoto Library Manager and launch.
    Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
    In the next  window name the new library and select the location you want it to be placed.
    Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    If iPhoto crashes while trying to create a new library then try this:
    Make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
         User/Home()/Library/ Preferences folder.
    2 - delete iPhoto's cache file, Cache.db, that is located in your
         User/Home()/Library/Caches/com.apple.iPhoto folder. 
    Click to view full size
    3 - launch iPhoto and try again.
    NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto.  You'll also have to reset the iPhoto's various preferences.
    If that fails to help a reinstall of iPhoto is indicated. To do so you'll have to delete the current application and all files with "iPhoto" in the file name with either a .PKG or .BOM extension that reside in the HD/Library/Receipts folder and from the /var/db/receipts/  folder,
    Click to view full size
    Then install iPhoto from the disk it came on originally and apply all relavant updaters.
    P.S.  If you're still running Tiger, 10.4.6, then the above may not apply.  If you're running a newer system you should update your profile so we have a better idea of where you're at.
    OT

  • I had a MobileMe account before... after upgrading to iOS 5, should I keep my account info under iCloud (settings) AND under mail, contacts and calendars (in Settings as well) or only keep the info under the new iCloud setting section?

    I had a MobileMe account before... after upgrading to iOS 5, should I keep my account info under iCloud (settings) AND under mail, contacts and calendars (in Settings as well) or only keep the info under the new iCloud setting section?

    That's not the correct port. It should be 993 for incoming.
    If you signed into iCloud from the System Preferences, it should automatically create the iCloud account for you in Mail. Sounds like it is an account you already had set up for MMe in Mail.
    Open Mail preferences, open the Accounts tab, disable that account in the advanced pane.
    Open Sys Prefs, open the iCloud tab, and sign out of iCloud. Then sign back in and see if a new iCloud account is automatically created.

  • Is it possible to keep the "Email me when someone replies" checkbox AFTER you make a posting?

    I'm not sure if I'm the only who does this, but sometimes I forget to check off this box before submitting a new post (i.e, starting a new message thread). Currently, this feature disappears after you submit a new message thread. It is real useful feature to have, and without it, makes your posting experience a lot less desirable.
    Is it technically possible to keep the check-off box available at all times during a posted thread?

    Hi SteveCT99,
    It is possible to automatically subscribe to topics you participate in:
    At the top of the page, click on the "My Settings" link, located after the "Sign Out" link by your name in the grey box.
    Click on the "Subscriptions and Bookmarks" tab
    Check box after "Notify me for my own posts and replies"
     - and/or - 
    Check box after "Automatically subscribe me to topics I participate in" to add the topics to your subscription list.
    Scroll down and Save changes
    You should now automatically get notices each time a new reply is added to the topic.
    Please let me know if this helps.  
    Thanks,
    SunshineF
    Clicking the "Kudos star" to the left is a great way to say thanks!
    When your problem has been solved, accept the solution by clicking the "Accept as Solution" button to help other members in the future!
    Rules of Participation

  • What will happen to the stuff in my keychain after today? I don't want iCloud. Can I keep the keychain? in my system?

    what will happen to the stuff in my keychain after today? I don't want iCloud. Can I keep the keychain in my system under lion? Can someone please help me?

    Thank you Sig. Well I keep all my passwords in my keychain. I'm concerned I'll lose them after today. I understand that keychain will be obsolete after today. I don't want icloud either, because I don't want all my personal info on a server. I want to keep my personal information in my system. Am I making any sense? Can you make any suggestions or offer any insights around this? 

Maybe you are looking for