Value Added Package - What Button Control Utility do I need?

I downloaded the Value Added Package after extracting the zip file I was left with 3 folders marked ' For 2 Button Model, for 6 Button Model and for No Button Model' what if any do I install? Am I missing something here?
I feel very silly asking this question.
Toshiba sent me the email for this update for my machine but without any explanation of what to do.
Any help greatly recieved.

Please take a look here:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=28285&tstart=0
Note; Many questions was already asked in the forum. Use the Forum advanced search option!!

Similar Messages

Re: Qosmio F50-12J - FN key not working with new Value Added Package

Hi,
I have Toshiba Qosmio F50-12J and have trouble with Value Added Package v 1.2.28.
I can't get the flash cards to work. When I press FN key nothing happens. BTW, I installed VAP on freshly installed Windows 7 64 bit. With the previuos version of VAP that I tried on Windows 7, KeNotify.exe was crashing. Now there is no apparent crash, but nothing happens.
Also, there is a problem with the Button Support utility (touch sensitive controls). Whenever I reboot my system, all the white illumiation LEDs on my laptop are lit although I turned them off.
So, could someone confirm that they have a working Value Added Package v 1.2.28 on Windows 7 64bit ?

Hi buddy,
Your posting is a little bit confusing and in my opinion you make something wrong. My Qosmio F50 runs pretty good on Windows 7 and I dont have any problems with the FN keys, illumination buttons or other function.
First of all make sure that all drivers are installed!!! I mean chipset, graphic, sound, etc. Check the device manager and if you can find unknown devices or yellow exclamation marks download the missing drivers on the Toshiba page.
The Button Support Utility has nothing to do with Flash Cards support utility. So before you make something wrong, please uninstall Toshiba Value Added Package and Flash Card Supports Utility. Restart the notebook after uninstallation and clean the registry using CCleaner (http://www.ccleaner.com/). If you have clean the registry, restart the notebook again.
Now you should install newest Toshiba Value Added Package. Restart again.
Install Flash Cards Support Utility for Vista. Restart again.
Now you should check if it works or not.
Sorry but thats all what I can say. I dont have any problems on my Qosmio F50 and Windows 7.

Tecra A8 PTA83E - Value Added Package installation

Tosiba Tecra A8 PTA83E
Microsoft Windows Vista Ultimate X64
I've been unable to install the Toshiba Value Added Pack (vap-vista-1011btn-en) or any version before it. I have spoke to Tosh tech support on numerous occasions and they always promise Customer Support will respond to the query, they never do.
Toward the end of the installation, whilst it is running the "Computing space requirements" process an error dialogue box pops containing "ID_ERR_NOTINSTALLVALZ_MESSAGE". The only option available is "ok" and when this is selected the install rolls back and the finish screen says "The wizard was interrupted before TOSHIBA Value Added Package could be completely installed".
I am, as I am sure you can understand, VERY frustrated with this problem. I purchased (the very expensive) Vista Ultimate as Toshiba claim this Laptop is Vista ready, and it may well be, but the drivers and software provided are not. I am also having problems with:
Bluetooth
Config Free Utility
WinBIOS updater
Sound Driver
Graphics Driver
I will save these problems for another thread as I would like to deal with these problems one at a time.
Thanks in advance for any help given/offered.

Hi
You are running the 64bit version of Vista???
Im not very surprised that you are not able to install the Toshiba Vista Value Added Package.
All the drivers, tools and utilities are designed for Vista 32bit version!!
In my knowledge the 32bit drivers dont run on the 64bit Vista OS!
Regarding the ID ERR NOTINSTALLVALZ MESSAGE error message;
It seems the BIOS update could solve this issue.
This was reported in different threads here in the Toshiba forum!!!
For example:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=20471&messageID=75256
or
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=21232&messageID=78197
greetings

MS Outlook on O365 versus FingerPrint software or Value Added Package

Hello all, I have problem - after installing FingerPrint software or Value Added Package some functionality in MS Outlook 2010 on MS O365 system stops working like planning share meetings. I mean so problem in the Security - this application close some ports or something...
You have a solution or idea?
Alex

Removing old and installing new VAP is definitely not risky. I have done this many times without any problems.
The latest version is much better and the flash cards are shown much faster than with old version. I can really recommend you to remove preinstalled version and install the latest one.

Satellite Pro L300 PSLB1E - How to install the Value added package?

Hi there
I have tried updating the value added package on my machine I followed the instructions and removed my previous version and even cleaning the pc with ccleaner and running tune up utilites 2009 but every time i go to install the new value added package i get the same message remove previous version first in the add and remove programmes list.
I have removed this checked and double checked in add and remove and it is no where to be found but still no success installing the new software.
Can anyone help me resolve this matter?
Thanks

Hay
Have you restarted your notebook after removing VAP from the system?
I have updated VAP on several notebooks and have never noticed something like this.
After removing VAP from the system new version was always installed properly.
I can imagine something is still in registry.
You can check it and try to remove manually.
Search all entries for Toshiba Value and remove it.
If this will not work all you can do is to install OS again using recovery image. After clean installation remove VAP again, restart your notebook and install latest version.

Toshiba Value Added Package fails to install - ID ERR NOTINSTALLTVALZ MESSAGE

Hi there,
I am running Windows Vista Home Premium Upgrade on my Satellite A100 and the Value Added Package will not install. It gets toward the end of installing and then produces the error "ID_ERR_NOTINSTALLTVALZ_MESSAGE".
Could someone please help me... I don't have any idea why it is doing this.
Cheers.

Hi
I remembered this theme was already discussed here in the forum.
I searched a little bit and found this thread:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=20471&messageID=75256
There you can find the same case and the solution!!
The issue was solved by BIOS update.
But be careful; the BIOS update is risky. Be sure that you use the right BIOS and right update procedure!!!
greetings

Value Added Package on Satellite X200-212 (PSPBUE) - win7

Hi there!
I have done a clean install of windows 7 in my Satellite X200-212 (PSPBUE), but i don't know how to get the Value Added Package for Windows 7....
ps: already tried the windows vista driver on it
thanks
null

I HAVE A SOLUTION THAT WORKED FOR ME.
When u download the file - extract and open it - MAKE SURE U SAVE IT TO THE DESKTOP (Change it by opening Browser)
Then open the file TVAP > click on Setup. Be sure not to open twice or it will not work!
If it works 4 U please tell others.

What tool or utility do I need for FN keys functionality?

Hi,
when I press the combinaison of " FN" key and other other keys (i.e: F1, F2, F3....), nothing displays on the screen as usual. it's seems that it does not work. How can I resolve that or what driver to download?
Thank you for your help!

I dont know which notebook model and OS do you use so my answer will be pretty general.
Visit Toshiba download page on http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp , choose your notebook, OS that you use and download/install Toshiba Value added package. This package contains Flash cards utility.

Satellite P300 - Value Added package doesn't work after computer restart

Hi,
I have got Toshiba Satellite P300 PSPCCA running windows vista ultimate 64x. I can not get my soft touch button working. I downloaded latetest TVA Package and installed it. After installation it asks for restart but I dont restart my laptop and I just perform Restart Flash Card and my soft touch button works all good which is mute, media player,etc. but once I restart my laptop it stops working.
I have tryed uninstalling and reinstalling software but no luck. I have read in toshiba forum about running CCleaner and do fresh installation but still have same problem.
Does any of you know how to fix it.
BTW i have got AVG internet security software on my system but have have added toshiba folder to exclude from realtime scanning just in case if its causing problem but no luck. I have searched qurantine folder and its nothing in there.
Please help me to get my soft touch button working.
Thanks.
Regards,
Jay
Message was edited by: Jay Padia

Hello Jay
I agree with Akuma. All you can do is to remove preinstalled VAP from the system and install latest version again. Why you didnt follow instruction to restart notebook after VAP installation?
I have installed VAP several times on my Satellite P200 and Satellite A300 without any problems but after latest version installation I have restarted notebook immediately. The installations procedure was finished and needed processes started in the background. I presume this is the problem on your Satellite P300.
If nothing helps the last step is to install OS again using recovery installations DVD. After doing this you will have clean preinstalled OS and everything will work well again.

Can't install HWsetup or Value Added Package on Windows 7 64bit

I've upgrade to Windows 7 pro 64 bit, and I found FN (Function) key doesn't work, so I re-installed TVAP many times, but nothing.
then I checked HWSetup to enable FN Key, but couldn't find it in Control panel, I found it in Toshiba Folder in Start menu. and each time I enable Function Key, and close the tool, then re-open it. I found it didn't save the options I selected.
and now I can't use Hardware Setup tool at all, I can't enable Function key, I can't add password or anything. I uninstalled it many times & re-installed it. but nothing !!
it cant get the BIOS version even !
here's a screen shot :
http://img59.imageshack.us/img59/3655/hwsetup.jpg
any help ??

Maybe you have installed all this stuff in wrong installations order. I have installed Win7 32 bit on friends Satellite A500 following this installations order:
-Win7
-chipset driver
-storage manager
-display driver
-sound driver
-modem driver
-supervisor utility
-infrared
-patches
-configfree
-VAP
-toshiba hardware setup
-HDMI control
-WLAN driver
Added Vista stuff:
-Toshiba assist - work properly
-Card reader - installed properly
-Webcam driver for A500 - tested with Skype - works properly.
-Synaptics driver
Everything works perfectly including hardware setup. I don't know maybe you should install Win7 again following this installations order.
By the way: hardware setup was shown in control panel in WXP but since Vista not anymore. So I asked you this question because I know for sure it is not in control panel anymore.
Since Vista Toshiba packed all tools and utilities overview in Toshiba Assist.

Where to find Windows XP Value Added Package (VAP) for Portege R500

Where can I find the VAR software for Windows XP for the R500 (SSD, without optical drive)? Because otherwise the fn keys won't function...
I already tried to bypass the check in the Vista version.
Then I choose custom and select some options. Some fn keys work, others don't. And when one doesn't every function key stops working until I run reset flash (or something like that).
When can I suspect the VAR software for XP?

Toshiba Common Modules controls the FN buttons under Win XP.
So reinstall the Common Module.
Hotkey Utilities for Display Devices controls the FN+F5 button combination.
Touch Pad On/Off Utility controls the FN+F9
But as I said above; common Modules must be installed at first and are very important.
So my personal advice to you; before you will post some personal statements, check the available drivers!!
Just a hint for the future ;)

Satellite P200D - Value Added Package error on Windows 7 64bit

Satellite P200D-12F (PSPBQE) and Windows 7 64bit
TVAP ERROR!
I cant find any solution to this problem on the whole internet. can someone please contact Toshiba providers about this because this is really silly?
Noone wanna answer me!
PLZ!
help

> this has to be fixed. i just dont understand the Toshiba people. Why dont they TEST the drivers before they upload them for the rest of the world?
The Win 7 VAP 1.2.28 which you can download for P200D is the same package for all other notebook series and its working because Ive installed it on my U400 and A210 notebook series so its NOT VAP issue.
It must be your Win 7 installation issue
First of all check if your BIOS is up to date.
If not then update it.
The VAP must be unzipped firstly before you would start the installation
I did it many times and if worked!
If nothing will solve your issue then you should renew your Win 7 insatllation.

What is control error? Please need help.

Hi,
I am having some trouble getting my script to work. I just want to go to iw32 and pull any field out and put it in the textbox. But I keep getting the same error. "Control not found". Could this be something wrong with the system install? Also, a strange script line "SetTopNode".
Can anyone help me out? I would really appreciate it.
Thanks!

Sorry, I didn't look at the error closely enough. It says the problem is with step 2, long before you copy anything. You still need the refresh before the copy, so leave that there, but we need to do something at the top of the script.
I'm not sure what step 2 is trying to do - do you recognise it from what you did when recording? At a guess I would say it is spurious - try deleting it and see if that helps.
I'm actually not sure what your script is trying to do. I can see it runs IW32, but how does it select a service order? I see nothing in the script that does that. That could be be not knowing IW32 well enough....
Here's a script that takes an order number from a custom field on SMEN, runs IW33, copies the order description, comes back and pastes it into another field back on SMEN:
This sounds like what you are trying to achieve. Does that help you?
Steve.

Tecra R840 - need driver for Touchpad on-off button control

Which driver supports the on-off button for the touchpad ?

As far as I know this tool should be part of value added package.
Do you have some problems with it?
Try to reinstall Toshiba Value added package.
Latest version you can find on Toshiba download page http://www.toshiba.eu/innovation/download_drivers_bios.jsp

Assign values dynamically to radio button

I am creating an online test. I will need to display answer choices from the table. I created radio buttons for these answer choices and I could put the labels dynamically by using
Set_Radio_Button_Property('block_name.radio_group_name', 'radio_button1',LABEL,cursor_name.field_name);
Now I have problem to set radio button values dynamically. Should I use when_radio_changed event?
Any help would be appreciated.

I really appreciate your help.
My intention is to display the test on the screen.
That means I need to display all questions and answer
choices for each one dynamically. Based on the answer
choice type (radio button or checkbox or drop down
etc) I will need to assign the values to them and
display on the screen. So far I could display
questions and answer choices on the screen and set
the label property for each radio button.
Do you know what is the syntax to assign value to
each radio button? First I will need to store user's
answers in a table. For that I need to know what
answer they selected. I wasn't sure how to do that.
ThanksAs I said, the values cannot be assigned dynamically. Thus you will store the answers in code (perhaps in an array?) and your radio buttons will be 1,2,3,4 etc.
In WHEN-RADIO-CHANGED you can retrieve the value from the array using the radio button value. Then store that value.
e.g. Your screen shows
What is the sound of one hand clapping?
o Blue
o Yes
o 12
These labels will be set dynamically, but the values for the radio buttons will be 1,2,3. If they pick "Yes", your radio button will be 2. You then get the value you really want from answer_array(2), where you put it when you retrieved the question details. Then you insert that into your users_answers table.

Value Added Package - What Button Control Utility do I need?

Similar Messages

Maybe you are looking for