Value contract warning message

hi,
Looking for a basic help on value contracts (ME31K). when i try to create the contract referring for a PR, i get a warning message "FICUSTOM000". can some one please elaborate on this.
cheers
wiz

Dear,
FICUSTOM000 - Item XXXXX contains commitment item with financial transaction other than XX
Re: Commitment item for down payment and bank clearing account
Contact FI Side.
Regards,
Syed Hussain.

Similar Messages

  • Price value zero warning message

    Hi Experts,
    End-user created Sales Order without noticing that the net price of material in it was 0.
      In this situation, end-user created "out bound delivery" and Post Good Issuing.
      These steps affected FI module.
    So, first, we'd like to know  wether there is T-Code to list up Sale Orders of which net price has zero.
    second,we'd like to set warning message when net price of material is zero when create Sales Order for company code
    Pls advsie
    Thanks

    1)  Execute VA05 where you can see a tab Net Value.  Wherever it is zero, you have to redo pricing
    2)  Go to OVA2, select "B - Sales - Item", double click Procedures.  Again select "20 - Standard Item" and double click on Fields.  There maintain as under:-
    Table:::Fldname::::Description::::Scr.:::Status:::
    VBAP:::::PRSOK::::::Pricing:::::::PKON:::::06
    Assign the above incomplete procedure to your item category in VOV7 followed by tick to the field "Incomplet.messages" to your sale order type in VOV8
    G. Lakshmipathi

  • Could not find selected item matching value "New" warning message in ADF

    Hi,
    I have a selectOneChoice1 for a field which has the following fixed values in it. And while creating it, I selected the 'SelctionRequired' option so that this field will always have a value.
    New
    Pending
    Completed.
    While navigating to this page, I am trying to set the value to 'New' (Retrieved from the DB) in the backing bean. But when the page is rendered, the above field is empty with the above options in the list and jdev has the follwing error message in its log.
    WARNING: Could not find selected item matching value "New" in CoreSelectOneChoice[UIXEditableFacesBeanImpl, id=selectOneChoice1]
    Can any one help me with this issue?
    Thanks,
    Priya

    The value of a list binding is the zero-based integer position in the list that is selected, not the actual underlying value.
    The simplest way to set the value of an attribute is to use an attribute binding (which can be bound to the same attribute as the list binding). When you set the value of an attribute binding, it sets the value as you supply it. Otherwise, you'd need to set the list binding's value to the numerical "slot" number of the one you want to change the value to.

  • SRM-Contract Management-Switching off Warning Message

    Hello Experts,
    We would like switch it off message " contract can not be used : Target value XXXX exceeds contract value XXXX"
    I have noticed this message is triggering from BBP_PD 560 and 561. I have switched off in maintaince view BBPV_PDMSG and as well as message control in SPRO but still I am getting warning message during PO creation.
    We don't want to get warning message during PO creation even though contract value exceeded.
    Please let me know your thoughts.
    Thanks and Regards,
    Ravi

    Hi Lisa,
    Thanks for your quick resopnse. I had tried as per your suggestion.
    Based on the message which I am getting  and find that this message is trigeering from bbp_pd 560 and 561. Can you please confirm whether it is triggering from there or any different message.
    Thanks
    Ravi

  • Error message in sales order against target value contract

    Hi experts
    I have value contracts scenario, when I create a Release Orders thatu2019s exceeds the value of the contract the system raise a message error, but in this case the decimal expression in wrong.
    The decimal expression of the country is 1.234.567,89
    The decimal expression of my user is 1.234.567,89
    Example:
    The contract value is 10.000
    I create a release order for 15.000
    The message error is "Target value in contract &1, item &2 is exceeded by 50.00", the correct messages should be: "Target value in contract &1, item &2 is exceeded by 5.000,00"
    I release two errors, the decimal expression according to my user and country doesn't match or the validation is doing some conversion.
    Do you have any idea was wrong??
    Thanks in advanced any input is really appreciated
    Susana

    Hi Susan.
    Just select the error message in the log  and click technical info . In the performance assistant it will show like :
    Technical Data
    Message type__________ E (Error)
    Message class_________ ZCRM_CSI_UI (Messages for UI of Leasing)
    Message number________ 022
    Message variable 1____ 
    Message variable 2____ RK78
    Message variable 3____ 0000001000
    Message variable 4____ 185124 020(Task:0000003105)
    Message Attributes
    Level of detail_______ 
    Problem class_________ 1 (very important)
    Sort criterion________ 
    Number________________ 1
    Environment Information
    Object Type___________ 15
    Logical Key___________ 
    Object GUID___________ DE3B1C475098F9F187E4002264F648B2
    Object Type___________ A
    Message class_________ 
    Save message__________ X
    Message no longer erro
    This will give you details of what  internal values are getting used for calculation . If you can give the error message class and error message number probably i can help u out.
    Regards
    Apoorva

  • Undo drills and view prompt values warning message

    H,
    I have a dashboard with a few simple pie charts. I also have a dashboard prompt which helps me select a month and also an other criteria common to all charts in the dashboard. But after i added the dahboard prompt whenever I log into this dashboard i get the warning message saying "The layout of this view combined with data, selction or prompts chosen has resulted in no data" "undo drills and view prompt values", Only once I click on "undo drills and view prompt values" my charts are displayed. Is this like a know bug or does something need to be changed for this.
    Thanks

    Hi, this is because there's no data for the values pre-selected. You should add a Deafult value for each of the column of your prompt. Make sure that default value has data to show.
    J.-

  • Can we change warning message appearing in contract to error message

    Hai Guys,
    One of our clients' requirement is to make the warning message which appear as "Date 31.07.2011 is in the past
        Message no. V1437" while giving a past date in valid from field of contract creation (VA41). I would like to know if there is any standard setting for this.
    Thanks in advance
    Sidhu
    Edited by: Gino12 on Aug 2, 2011 4:51 PM
    Edited by: Sidhu12 on Aug 2, 2011 4:51 PM

    Hi,
    Since this message begins with 'V1..', there is no standard way to change it. The only way to do so is:
    Go to SE91
    u2022     input V1 in Message Class
    u2022     input 437 in Number and execute.
    u2022     select the message number and click on "Where-Used List"
    u2022     Only select 'programs'
    u2022     Open the program
    u2022     You can see the codings written for the error message as W437 which may be changed to E437.
    This is not recommended by SAP

  • How to get message Target value exceeded for value contract in consignment

    Hi Gurus,
    I have created a value contract in consignment process.
    When the TOTAL VALUE of the release orders exceed the TARGET value of the value contract, system is NOT alerting me with message "Target Value Exceedded".
    In normal value contracts, system throws error message while creating release order if target value is exceeded.
    How such message can be generated in case of consignment process?
    Is there is any configuration involved for item category 'K' for this requirement?
    Thanks in advance,
    Regards,
    Sastry

    Hi,
    Thanks for the reply.
    Those messages are already configured and they are working fine for my normal contracts.
    I need such messages for value contracts in consignment process (item category 'K').
    As there is  no net price in consignment PO, such messages are not generated even though required messages are already configured.
    Is there any other thing I need to do for CONSIGNMENT process
    Regards,
    Sastry

  • Release orders for value contract

    Hi Folks,
    I have question on value contract.
    Customer contract is fullfilled by issuing orders against the contract. When a release order is created for the contract, the system automatically updates the released values in the contract. The release order value is calculated from the total of the open order and delivery values, plus the value that has already been billed to the value contract. System checks this value with "Outline agreement target value" in value contract and issues warning or error message depends on configuration settings in value contract item catagory.
    We have business scenario where system has to check net value of value contract rather than checking "Outline agrrement target value" in value contract. Because we offer some discounts to customer in value contract thus net value of the contract differs from agreement value. So that system will issue error message when release order value exceeds net value of value contract.
    Is there any customizing settings available to meet the requirement?
    Awaiting for your inputs.
    Regards,
    Prabhaharan

    Hi,
    In transcation VTAA at item level have your own cory requirment code which will calcullate net value of the doc, hope this works out
    regards
    sriky

  • Warning messages for purchage order date?

    Hi Friends,
      I am ABAP developer, and I am developing one webservice to create value contract from dotnet front end,
    So user can enter inputs from that front end and he will get SAP generated value contract id.
       Here I did validations for all the fields and giving error messages to restrict user to dont give incorrect values.
    Now coming to my issue..,
    While entering the PO Date in the initial screen of contract creation,
    If I enter future date,
    > The purchase order date lies in the future. Please check
    If I enter the past date.,
    > The purchase order date is in the past. Please check
    I will get warning messages like this, so what should i do, I can enter, today's date to avoid these messages,
    And I can neglect these two messages to proceed, as they are warings only.
    But in my case , Can i process these messages to front end, Is it mandatory.
    I want to know the intention of these messages, then i can proceed.
    Thanks,
    Naveen.I

    Hi,
    It is telling an information about the date status and n=it is not an error message.
    so you can go ahead with this message.
    If you want the same message in front end then you can write the logic in the dotnet prog.
    Regards,
    Sumith

  • Warning message in BW Report  through Portal

    Friends,
    I really need your help to remove the waring message.
    For the purpose of changing the description on the Selection screen from “Cost Cetnters (Authorised Values)” to “Funds Centers” I had changed the ZCCTRATI variable description to Funds Centers
    Issue:
    When we open the old report we see the following information message.
    " Value if variable ZCCTRAT1 is automatically converted
    I did go to TC RSRT as of Dinesh,Vijay advice ,Just want to know that what message i need to Click .because i could nt find the relevant message
    Can u help me how to remove this ?

    Hi Manohar,
    Edit to add: Here I assume you have a Web Application Designer (WAD) report.
    You can suppress system and warning messages in WAD. Try this and see if it helps.
    - Go to your WAD report
    - In the top part of the properties window there is a drop down box. Open this box and select the top level entry there. This should be the name of your report.
    - Click Web Item
    - Check the following two checkboxes: "Do not Display System Messages" and "Do not Display Warnings".
    Hope this helps,
    Regards,
    Petter
    Message was edited by: M Petter

  • Error message into warning message KO450

    Hi,
    There are  unsettle RA  value in project PAD-9114. Because of  this unsettle RA  value in  the project  we are not able to  close the project and receiving error message like below:
    1.There is still WIP for wbs
    2.Balance of  wbs is not zero.
    There is still WIP for WBS PAD-9114
    Message no. KO450
    Diagnosis
    The WIP for WBS PAD-9114 has not been cleared.
    System Response
    WBS PAD-9114 cannot be deleted.
    Procedure
    Calculate the WIP for WBS PAD-9114 so that it can be cleared.  Then settle WBS PAD-9114, including the cleared WIP in the settlement.
    How  to change  above  error message   into warning message so that   it will allow us to  close  the project.
    With regards,
    V.krishnamoorthy

    Hi,
    Thanks  for your answer. But still i am receiving the same error
    There is still WIP for WBS PAD-9114
    Message no. KO450
    Diagnosis
    The WIP for WBS PAD-9114 has not been cleared.
    System Response
    WBS PAD-9114 cannot be deleted.
    Procedure
    Calculate the WIP for WBS PAD-9114 so that it can be cleared.  Then settle WBS PAD-9114, including the cleared WIP in the settlement.
    With regards,
    V.krishnamoorthy

  • Removing std warning message in SRM 7.1

    HI,
    We are on SRM 7.1 ECS.
    Whenever account assignment category is changed before ordering a cart,a std warning message is displayed "Enter a value in the mandatory field in account assignment" which is very annoying.Is there any way this message can be stopped to be displayed in the SC screen?
    Pls advise.
    Thanks in advance.

    Thanks Ricardo.
    We are on SP SAPK-70105 for SRM SERVER 701 .I dont undsratnd how this correction came in to our system.
    I'm assuming the corrections of note 1607395 are in the system and hence this message.How do I avoid this message?I tried adding it to table BBPV_PDMSG but that didnt help.
    Pls help.

  • Value contract - Need restrcition of amount in PO for contract line item

    Hello Guru,
    I want to create a single value contract (WK) for multiple years .. say 3 years with target value as 450K USD with three line items for each year of value 150K USD.  I would like that when buyers create a PO system should not allow them to create release purchase order for each line item more than 150 K for the year. Can somebody tell me how to configure that?
    Here is my current config example :
    Contract #ABC - Target value 450 with validity date 1/1/11 until 12/31/13
    Line item 1 - 150 K
    Line item 2 - 150 K
    Line item 3 -  150 K
    Now when I create PO with respect to contract#ABC line item 1 - system allows me to create PO with more than 150 K but gives me error message only if I exceed more than 450 K (because message 06/042 is error in config).
    The requirement is to create a single contract for the vendor. Can somebody help me to figure out the way to restrict PO amount by each year limit by standard or custom configuration?
    Thanks, Sachin
    Edited by: sachindubey on Feb 29, 2012 10:15 PM

    Hi,
    As far as I remember it was simple logic!
    Something like
    Goto EKPO select KONNR ;
    If  KONNR != blank (Not equal to blank)
    Do not allow to change condition type u201CPB00u201D
    Also incorporate addition date check for your need

  • Release Order for Value Contract WK1

    i dont want to create sales order with referance to contract.
    i have done below.
    1. i created assortment module in wsv2 tcode for value contract
    2. i created value conract (type WK1) in va41 tcode
    3. i created (messages about outline agreement) "check at item level and copy if unique" sales doc type OR in tcode vov8
    so, when i created a sales order (OR) without referance to value contract, i want the sales order to find the related contract at item level and copy
    but sales order cant find the material in the assortment module that i created in contract type wk1.
    where am i doing wrong?
    Edited by: manas han on Jul 6, 2010 11:14 PM

    Hi,
    Firstly, I assume you have properly setup all the copy control of of the document types you want to use and also properly defined the document types and item categories you want to use.
    Maybe you want to check/try the following: -
    1. Check the validity of the assortment module you have created.
    2. Try to create the assortment module again using tcode WSO1.
    3. In your Order Type "WK1" and under the "Contract", maybe include the subsequent Order = OR
    4. Check that your material has the product hierarchy properly setup?
    5. Finally, try to use indicator "B: check at item level" instead of "D: check at item level and copy if unique". You would not get a dialog box in OR if you use indicator D as it will automatically copy to the OR if there is exactly one reference document created.
    Hope this helps.
    Thanks.

Maybe you are looking for

  • Is there a way of blocking websites on a ipod touch

    wierd websites keep apearing on my safari pade i keep going back to the history folder to try and block them bt its no use. is there a way to block pages on safari if know PLEASE TELL ME NOW!!!!!

  • Row and column heading in cross tab report

    Hi Gurus, Is it possible to leave column headings and row headings in a crosstab report blank? Pooja

  • Bank Account

    I want to do a program that allow me to register my income and my expenditures. The problem is: everytime the program is started I want to see the variations that step by step I will put. For example: the first time the program is started my count is

  • Missing TV season after downloading all 6 seasons

    Hi all, I recently downloaded a TV series that has 6 seasons. All seasons are in my Itunes except season 3. when I go to the Itunes page where I purchased it, and it says I already purchased it. Where do I locarte the missing season and where can I r

  • How does one create product keys when developing 3rd party Addons

    HI DOes anyone have experience in developing 3rd party addons? How do you manage liscense keys, is there a function module which can generate the key? and buildingin a expiry date so that a customer can note hack a table entry to continue? Thanks Hen