Value field in not available to input in F-02.

Hi,
I want to enter the value field sales amount & qty in CO-PA. After entering the characteristics when i post the document only sale amount get captured in COPA.
But i want to enter the qty also in COPA. Pls suggest how to enter the qty in COPA.
Regards,
Rohidas Shinde

Hi,
I want to enter the value field sales amount & qty in CO-PA. After entering the characteristics when i post the document only sale amount get captured in COPA.
But i want to enter the qty also in COPA. Pls suggest how to enter the qty in COPA.
I have maintained below configuration in PA transfer for Direct revenue posting from FI. But not able to update the Quantity field.
Regards,
Rohidas Shinde

Similar Messages

  • Contract Currency Field not available for input

    Dear experts,
    I am configuring RE-FX in SAP ECC 6.0 and when i try to create a contract with a currency different from the company code local currency, the contract currency field is not available for input even though in the field status, it is checked as available for input. I want to be able to use a currency for my contracts different from my local currency. Also, havent yet made any changes to the standard field status settings.
    Any kind of advice would be appreciated
    Many thanks

    Hi Severina,
    different currencies for RE-FX are introduced with Enhancement Package 2. Therefore you have to implement this enhancement package and activate the business function for Real Estate and the appropriate subfunction to be able to use different currencies.
    Hope that this information is helpful for you.
    Regards, Franz

  • New DSO data fields are not available for transformations in the upwardflow

    Hello,
    There are data flow from
        many source DSOs -> Target DSO -> Final DSO.
    Different transformations are defined and activated with DTPs. This works fine and provides the desired results.
    now new fields are added to the target DSO, final DSO and one of the source DSO.
    When I now try to edit the transformations, the new fields are not part of the sources at the different stage.
    The fields are available in the Data Source created out of a DSO but not directly when using a DSO as a data source.
    Have anyone faced such a problem?
    any solutions to this?
       - I cannot delete all the other transformations as this is too much work to do and there is no time for it.
    Regards
    Kannan

    We created ZMD_BS_MAT_OVP_LAYOUT. But the situation has not changed - the fields are not available for edit.

  • Appended field is not available in BI

    Hi Gurus,
    I have appended a field in the datasource, removed a hidden tick so that it will be available in BI system but after replication of datasource I still could  not get this field in transfer structure. When I was checking I found that in display datasource window under "Fields" tab for that particular field "Transfer" column is uncheck, due to which the field is not available.
    Now my concern is that how should I make this available in BI.
    any Help will be heavily appreciated.
    Thanks,
    Saurabh.

    Hi,
    I am on BI 3.5 system.
    and I didn't mean that my datasource is not in ROOSFIELD table, it is there but what you are saying is not applicable in my case. in ROOSFIELD, for the appended field  the OLPTSrc version is "A" and Field Attribute is "P" which is what the ABAP program stated above will do and I was very well aware of the program.
    My, ROOSFIELD output is,
    2LIS_XX_XXX                      A               ZZXXXX                      P
    This field was not hidden earlier as well, i could get this field for selection in RSA3 and even in infopackage also.
    But, the only concern is what I posted in my 1st question.
    How will I get that checkbox ticked?
    Thanks,
    Saurabh

  • Field 'Version' not available as a source field in COPA derivation

    HI,
    I don't see the field 'Version' as a source field in CO-PA derivations (KEDR). Wondering why it is not available for derivation when I can see it as one of the fixed characteristics. Am I missing something in configuration?
    Thanks in advance.

    HI Pradeep,
    I am sorry for the delayed response. Please go through note 134889 for your query.
    Best Regards,
    Abhisek

  • AR Invoice Commission field is not available in XL Reporter

    Hello All,
    I am trying to create a commission report in XL Reporter.
    I have a 'Commission %' field in INV1 table of SAP B1 (AR invoice) which is not available when I try to pick it up from the formula builder in XL Reporter.
    It is not a User-Defined Field, so my understanding was it should be in the Sales - A/R section of Formula Builder along with the other A/R Invoice line items. However, it is not there...
    I was wondering if there is a way to add it to the list?
    Thank you!

    The following is a FMS query we use to select the part no from a row and put it to a UDF.
    Select
    $[$38.1.0]
    The number 38 refers to the item no when looking at the system information (use View>System information) for the field you want to select.
    Use this query (updated to reflect the commission field item no) and link it to a FMS on the UDF you have created.

  • Sql expressions field option not available in field explorer

    Hello:
    I would like to create a sql expression field in my report. however when I go to the field explorer panel, a sql expression fields node is not available to create one. Does anybody know why is this not an option?
    Thank You Very Much

    Also if you are creating based off any stored procedure or View you can't see Sql Exprn under field explorer.  I think it is also databse specific.  What is the databse you are using ? also what is your datasource ?
    Thanks,
    Sastry

  • Value Ranges option not available in Query

    Hi ,
    I am trying to hardcode some GL ranges in Query global filter in prodution environment.
    But i feel strange the option is not available.
    I dev while creating new Query i have the option.
    Did any one face this kind of strange problem.
    Please adivce.
    Thank

    HI Kiran,
    You don't have authorization to see the value ranges.
    Login with other id which have the full permissions and check.It it is problem with authorization.
    Hope it helps.
    Thanks & Regards,
    Ramnaresh.P.

  • Value field does not updated in COPA Billing

        Hi,
    We are facing one issue in COPA.
    We are created one Condition type ABC, this condition type we have selected the check box for Accruals in control data 2 ,then we are created one Account key 123 , in pricing procedure we have assigned this one ABC condition type to accrual account key 123.Then Vkoa setting in TAble one customer/mat/ acckey combination we have assign one g/l like transfer cost with (11 cost element) in provision for accrual column.
    COPA side setting as been done :
    step 1: user defined value field like NMR and this value field is assign in ke4i with respective condition type ABC  value filedNMR.
    We are generated the billing document.in a/c document is below entry.
    Customer a/c dr 10
    Trasnfer Cost a/c dr 1
       To Cost on sales a/c 11-
    Above one 1 rs in coming in condition records in billing document.But In COpa document  my revunue is 10 rs with value filed, NMR  value filed  amount "1" is not updated.
    Note :above condition type ABC  we are not selecting the statistical check box  in Pricing procedure
    Please give me suggestion.
    Regards
    Reddyrrreddr

    Hi Reddy
    As far as I understand, any GL Account maintained in VKOA under provision column will not flow to COPA, be it B/S 8754 or P/L 4567.
    The GL mapped under G/L Account column would essentially flow to COPA. Therefore in your case, values posted to GL 1234 should flow to NMR Value field through SD Condition type ABC.
    I dont have access to system so can you check below options:
    1) Once you had done KOFK, did you create the cycle from scratch to evaluate the results. If so and if its still not working, can you please share with us the output of the KEAT and / or KE4ST report for the billing document, posted to accounts.
    2) Also check in the pricing procedure, if you set an account key under accruals column, then in VKOA, you need not have to mention seperate GL under Provision Column. Just maintain the GL account under "G/L account" column for each Account keys (4 records with KOFI & KOFK)
    3) If above also doesnt help, test if removing the check from Accruals in the ABC Condition type configurations really helps, in which case you may need to maintain GL under provision column.
    Will explore more options and will revert back hopefully by tuesday.
    Hope it helps
    Regards

  • TIMESTAMP field is not available in BW for the datasource 3FI_GL_P1_SI

    Hello,
    We have created a datasource 3FI_GL_P1_SI using transaction FAGLBW03 for the Regulatory Ledger i.e. P1.
    Now, when we check data in RSA3, we see that the TIMESTAMP field is available. This field is not hidden. When we replicated this datasource in BW, the TIMESTAMP field is not present. Has anyone faced such issue before?
    One more issue with this datasource is that, though the TIMESTAMP field is present in R/3, its data is not correctly populated.This field should store the data in the format (YYYYMMDDHHMMSS) but it stores the hexadecimal data. However, when we check the data of the datasource 0FI_GL_14, the data is correctly populated. Could you please let us know how to overcome these issues?
    Thanks and Regards,
    Nitin Chopade.

    Hi,
    In RSA6 check the selection option then try to replicate and Activate....
    Regards,
    Satya

  • Adding new field to the page when the field source not available

    Hi,
    I have a requirement to add vendor_serial_number (manufacturer's serial number) to the page /oracle/apps/csi/instance/general/webui/InstanceDetailsPG. This column is available in mtl_serial_numbers_all_v table. I don't see any VO in that page has access to this. What is the best approach to add this field in the page.
    Create a new VO with the query to get the vendor_serail_number based on the item_number, serial_number.
    Attach the VO to the AM InstanceDetailsAM or create a new custom AM as we can't attach the new VO to the seeded AM.
    Add a item to the page that gets the column value from this new VO.
    Please suggest.
    Thanks,
    HC

    1. Create the textfield item using personalization.
    2. Create a View Object to get the field
    3. Extend the InstanceDetailsCO and attach the VO to AM programatically in the extended CO.
    Any suggestions.
    Thanks,
    HC

  • Values Set does not appear in Input Element Entry (Com. and benefits)

    Hi all
    I have created one values set, but it does not shown, wenn i selecting this values set in Element Entry. Pls. give me some advices.
    Thanks

    Hi JIGAR BHATT,
    Please have a look at below SPRO paths and verify it...
    IMG menu path
    SPRO->Financial Accounting->Financial Accounting Global Setting->Tax on Sales/Purchase->Basic Setting->Define Tax Juridiction
    SPRO->Materials Management->Logistics Invoice Verification->Incoming Invoice->Maintain Default Values for Tax Codes.
    Also have a look on Documentation which is available at the above path of SPRO
    And also ask to BASIS and Functional Consultant if they can help you out for it.
    Hope it will solve your problem..
    Thanks & Regards
    ilesh 24x7

  • Item Category Grayed Out (Not Available for Input)

    Hi Experts,
    I want to know SAPs logic for graying out it. cat. field (PSTYV) when entering an Order. Item category  cannot be changed while creating an order once its determined. How & why does SAP grays out it. cat. field and under which circumstances.
    My case: I have a configurable item and based on this item subsequent item and its it. cat. is determined, once SAP determines second item it is graying out it. cat fields on both items. Though in configuration I have manual it. cat. maintained for both items along with dependancies. Any info on this matter will be greatly appreciated.
    Thanks

    Hi Ron,
    Please refer to note 208245 as it has the answer of what you are looking for & possible workaround solution to meet your business requirement. Otherwise, please do not hesitate to update this forum.
    Thank you.
    Best regards,
    Huey Chin

  • Fields in Field Catalog not available when creating condition table

    I  see that field HIEBO01 to HIEBO12 are available in Field Catalog, but I don't see these fields when creating condition table
    Please let me know what I am missing here.
    Any insight on this would be really helpful.  Thanks guys!

    you need to get them added to the pricing structure KOMKAZ or KOMPAZ based on whether you need @ header level or @ item level respectively.
    and then add the logic in the sales order user exit for these added field in the pricing_prepare_TKOMK or pricing_prepare_TKOMP...again based on header level or item level.....
    Then go back to the field catalog and select from the respective structure and add them, Then you can see them when creating cond tables.
    Hope this helps. Hope i havent misunderstood your query.,
    Regards
    Sai

  • Some notification fields are not available at

    Hello,
    I am customizing PM notification/
    I tried to change field selection  of several notification fields.
    I have suceeded to change most of the fields But I fopund no way of changing field selection for some fields such as:
        ILOA-MSGRP (ROOM)
        ILOA-PROID (WBS ELEMENT)
    Ther are more fields.
    Does anyone know if there is a way to control these fields?
    Best regards
    Shlomo Assouline

    Hi,
    These Location and Account Assignment fields can be customized using transaction OIAZ. The customizing you make will affect notifications and orders. Use a influencing field (call program, order type, notification type) to restrict customizing to just notifications if that is what you want.
    -Paul

Maybe you are looking for