Value Fields assignment. urgent!!!!!

< MODERATOR:  Message locked.  Please read the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] before posting next time. >
hi gurus,
we use costing based COPA. i have created a new value field and assign it to a  SD condition. but when billing, there is error, i check the system and found this value field has been actived but can not displayed in my operating concern. i want to transfer the value field to operating data structure with T-code KEA0. but failed. because it is actived in the column "Copy from". it is in our production system. very urgent. the following is the error message.
Operating concern 6000 does not contain value field VV150 
Message no. KE891 
Diagnosis 
Value field VV150 is not found in operating concern 6000. This value field is nevertheless assigned to condition type ZD69. 
System Response 
The billing document cannot be posted to Profitability Analysis. 
Procedure 
Delete the assignment to condition type ZD69 for operating concern 6000. You do this in Customizing for Profitability Analysis underFlows of Actual Values -> Transfer of Billing Documents -> Assign Value Fields.
your valuable point will be assigned.
thanks in advance.
Ivan

You have to declare the l_lotno and l_batno as global variables.
here they are local variables and their scope is withing the block in which they are defined.
Declare them outside the blocks(Performs etc)
Regards,
Ravi

Similar Messages

  • PA Value Field Assignment

    Hello,
    Can you please what PA Value Field Assignment is and how it is configured?
    Thank you very much.

    Hi Salman,
    Please refer notes: 52849 - INFO: Transfer of conditions with +/- signs
    Hope this helps

  • Value field  assigned to value category

    HI ALL,
    WHILE DOING GR I AM GETTING ERROR "Value field  assigned to value category".
    PLEASE HELP
    THANKS IN ADVANCE
    SRIDHAR

    HI ALL
    Message no. ZK001
    THANKS,
    SRIDHAR

  • Change the Condition type to Value Field Assignment in KE4I

    Hi All,
    I have a requirement where a condition type which has been assigned to a Value Field needs to be changed/re-assigned to a different value field.
    There are already some postings into the current value field.
    How can I handle these postings once I change the assignment in KE4I.
    Please help me.
    Thanks in advance,
    erp.warrior.

    Hi
    Once you change in KE4I - It would impact only the subsequent postings... Historical postings wont be impacted...
    If you want to impact them as well - Follow one of these 2 approaches
    a. Then reverse the billing documents which have posted to this Value Field.... Change KE4I and post them again...
    b. Do a KE21N upload i.e. a -ve amount on the Old value field and a +ve amount on the new value field
    Regards
    Ajay M

  • COPA - Value Field - Assignment to a G/L account

    Dear All,
    Could anyone kindly let us know what the relationship between the COPA value fields and G/L.???
    (We do not use Sales and Distrubution module in our company)
    Thank you Very much
    Gayani
    Moderator: Please, search SDN

    Hi,
    The configuration part looks to be ok !!  But just check the G/L account you have mentioned, the second one which does get booked, see if it configured in a way to accept the value returned by the condition.
    Check in the order item conditions,  the value returned by the z condition not getting booked.
    Hope it helps.
    Thanks & Regards
    Sadhu Kishore

  • Message No F5808 Field Assign. is a required field for G/L Account.

    Hi Guys,
    I have a problem when releasing a cancel credit memo billing document.
    It shows the following error message:
    Field Assign. is a required field for G/L Account.
    Message No. F5808
    Diagnosis,
    The value field "Assign." in the interface to Financial Accounting is an initial value but you are required to make an entry in the field selection for G/L Account XXXX in company code XXXX linked to the field selection for posting key "50".
    System Response
    Error
    Procedure
    It might be an error in the configuration of the G/L account field selection. The initial application, used to call up the interface must otherwise define a value for field "Assign.". If this is the case, contact the consultant responsible for the application.

    Hi,
    The Assignment Number BSEG-ZUONR (I suppose "Assign." means it here.) field status for posting key and GL is optional and mandatory.
    I think the GL Account SORT KEY in FS00 is the assignment selection for Billing to FI doc. Say if the SORT KEY is Posting Date, the assignment from Billing to FI Doc would be the date of posting.
    But if the SORT KEY is blank ( This is case for my G/L account), the system will select the assignment written in Billing document header (VBRK-ZUONR).
    I checked other billing documents, which are not in the same billing type as the one with error, and found it follow the above logic.
    So how come this time it shows the above error? Really confused.
    Emma
    Edited by: qun yang on Sep 22, 2011 9:12 AM

  • COPA Value Field +/- Error while releasing Billing Document for Return orde

    Hi,
    We have done Sale Order - PGI - Delivery and Billing for Quantity 10 and the customer returned 10 Qty due to some problem.
    When i am doing the return process billing, I am getting the below error...
    9000000892 000000 Check value field assignment for condition SGL1*
    When condition "OR01" (application "V") was transferred to the value field "ERLOS" in operating concern "OR01" in
    Profitability Analysis, the following became apparent:
    o   The condition can take both positive and negative
        values
    o   The flag "Transfer values with +/- signs" has not be
        set in Customizing for value field assignment.
    Inconsistencies in the data could occur as a consequence.
    Can any body help me on this issue
    Is there any consequences if i activate +/- sign in KE4I for the above value field Please suggest me
    Thanks
    KC

    Hi Kischow
    You shud tick the +/- indicator only if
    1. any One condition type repeats in the pricing procedure and can have +ve and -ve values
    2. Two cond types in pricing procedures are assigned to same Value Field and the cond types can have +ve and -ve values
    In COPA, all values are transferred as absolute values without + or - sign, with some exceptions ofcourse....
    So, if you dont check + / -  indicator in the cases mentioned above, say, +100 and -80 will be transferred as 100and 80 and the result will be 180 instead of 20
    Regards
    Ajay M

  • How to Change the Value Field Type of a Value Field

    Hi,
    How can I change the value field type from Currency to Quantity of a value field? I have tried to do it in KEA6. I can change the value field and its description, but not the value field type from currency to qty. If I change this config, is there any other changes that I need to make so there is no side issue of this change?

    Hi Prem,
    Once you created value field as quantity or currency, you can not change this nature of value field. Based on this, system creates lots of data and tables. For this reason system will not allow any changes in quantity or currency.
    Alternative way is to remove the old value field and  create a new value field assign to operating concern and put all your seetings.
    Please let me know if you require any clarifications.
    Thank you,
    Regards,
    Santosh
    Reward points if helpful.

  • COPA value field not getting complete SD condition value

    Hi Gurus,
    I find a strange issue when a billing document is transferred to COPA (well basically, after a billing document is released to accounting, all the controlling docs and COPA docs are generated). The issue is, I have a SD pricing condition which has been assigned to COPA value field. I also have the transfer +/- sign checked on this value field. Now consider the following 2 scenarios:
    Scenario 1: In VKOA, two different G/l accounts have been assigned to the corresponding pricing condition account key. These 2 G/L accounts have been defined as cost elements with category '12' (its related to sales deduct). and fall under the same cost element group. When a billing doc is posted to accounting and hence to COPA, I see that there is no value in the value field and the corresponding condition type. Then I ran a simulation using KE4ST and found that I have two lines with the same pricing condition type and value field but one carries a positive value and the other one carries a negative value. Then I came to a conclusion that may be these two lines are netting out and hence there is no value being posted on the value field.
    Scenario 2: In VKOA, I have assigned two different G/L accounts which fall under different cost element group and one is defined as category 12 and the other as category 1. This time I see that only 1 line of value field is brought into COPA corresponding to the pricing condition and hence I see a value in COPA value field. But business doesn't want to go with scenario 2 as they don't want to use two cost elements in different cost element group. Also one is sales deduct and the other is primary cost/ cost reducing revenue. So there is a balance getting accumulated in the primary cost/cost reducing revenue element.
    How do I resolve this issue to post a value to the COPA value field using scenario 1?  I have also tried to uncheck the transfer +/- sign but I am unable to even release a billing doc to accounting as it is giving me a error message,: "correct the value field assignment for the condition type".
    Please help me !!
    Regards,
    Sony

    Version of SAP?

  • Blank value in "Assignment" field in FBL3N transaction output

    Hi experts,
    When i exeucted FBL3N transaction, the assigment field gets displayed as blank in the output screen. 
    I have given input for GL Account, Company code and Posting date in FBL3N transaction input screen and executed. Iin the output, the "Assignment" field (field ZUONR) gets displayed with empty value.
    recently the system is upgraded from 4.6C to ECC 6.0.  When we checked in our 4.6C system, this FBL3N transaction displays value for Assignment field. But when we checked in ECC 6.0, this "Assignment" field gets displayed with blank value.
    Could anyone suggest the reason why the Assigment gets displayed with blank value..
    Is any OSS note to implemented for solving this issue?. If so, pls share the Note details..
    regards,
    Shanthi

    Hi,
    Yes, there is a SAP note. Check SAP note # 322910.
    You should have posted it in FI forums.
    Hope this helps.

  • Assign direct material cost to value field in copa while issue to Prod orde

    Dear All,
    My requirement is like this:
    There are some 16 material groups from A to P each containing some materials(finished goods).
    I want to allocate overhead to different material groups(Charecteristic in copa) in COPA using the periodic assesment cycles. I am able to allocate overhead(admin & sales cost) to different value fields in copa from different cost centers.
    I want to analyse the product cost and also the profitability of each material group in COPA using Report painter. Iam able to pull all the costs which i assign to value fields using assessment. But, i am NOT able to get the direct material cost which is issued to production orders using BOM.
    My question is whether we can assign the direct material cost to any user defined value field(material cost value field) while the material is being issued to production orders. Is there any automated way where we can directly assign the direct material cost to value field in copa while issuing the material to Production orders.
    Pls explain me whether we can do it. if yes how?
    Thank you very much in advance.
    Regards,
    Vishnu
    VST-IT.

    PA is a Profitability analysis tool. That means it gets updated when a sale is made, not before. (Except for settlements and assessment of overheads.)
    Goods issues for production gets updated in CO-PC, and needs to be analysed there. If you don't, you loose all the inbuilt tools for variance analysis, cost estimate comparisons, Wip Calculation etc. To the best of my knowledge, a Profitability Segment cannot be used as a cost object in Production Planning, because amongst others, you need to be able to capitalise the produced materials to stock at the end of the production run, or to WIP at the end of the Financial period,which is not possible with PS.
    Similarly, overheads are recorded in CCA and needs to be analysed there.
    If one goes against these big groupings in SAP, you always run into problems.

  • Screen value not assign in field symbol

    Hi gurus,
             I create a field symbol for module pool programming for assigning screen value. I create a tab in main screen and three subscreen for tab.  in first screen values perfectly asign in field symbol but second subscreen FS1,FS2,FS3 values not assign.
    Atthe time of save three subscreen values stored in internal table, then insert into ztable.
    PERFORM SAVE_DATA USING '15' 'GTAB-IO_CODE' 'GTAB-IO_PER' 'GATB-IO_VAL'.
    PERFORM SAVE_DATA USING '26' 'GTAB-IO_SCODE' 'GTAB-IO_SPER' 'GTAB-IO_SVAL'.
    FORM SAVE_DATA USING X TYPE I
                         FS1 TYPE STRING
                         FS2 TYPE STRING
                         FS3 TYPE STRING.
    *FORM SAVE_DATA USING X TYPE I FS1 TYPE STRING.
      CLEAR SNO.
      CLEAR C.
      ITAB-MANDT = SY-MANDT.
      ITAB-BUKRS = '1000'.
      ITAB-DOCNO = '0001000005'.
      ITAB-BUDAT = SY-DATUM.
      DO X TIMES.
      IF X EQ '15'.
        FS1 = 'GTAB-IO_CODE'.
        FS2 = 'GTAB-IO_PER'.
        FS3 = 'GTAB-IO_VAL'.
      ELSEIF X EQ '26'.
        FS1 = 'GTAB-IO_SCODE'.
        FS2 = 'GTAB-IO_SPER'.
        FS3 = 'GTAB-IO_SVAL'.
      ENDIF.
        C = C + 1.
        SNO = SNO + 10.
        ITAB-SLNO = SNO.
        ZCOMRP_ORTRN-SLNO = SNO.
        CONCATENATE FS1 C INTO FS1.
        ASSIGN  (FS1) TO <FS>.
        ZCOMRP_ORTRN-PRCOD = <FS>.
        ITAB-PRCOD = <FS>.
        CONCATENATE FS2 C INTO FS2.
        ASSIGN  (FS2) TO <FS>.
        ZCOMRP_ORTRN-KBETR = <FS>.
        ITAB-KBETR = <FS>.
        CONCATENATE FS3 C INTO FS3.
        ASSIGN  (FS3) TO <FS>.
        ZCOMRP_ORTRN-DMBTR = <FS>.
        ITAB-DMBTR = <FS>.
       INSERT ZCOMRP_ORTRN.
        APPEND ITAB.
        INSERT  ZCOMRP_ORTRN FROM ITAB.
        CLEAR FS1.
        CLEAR FS2.
        CLEAR FS3.
       CLEAR C.
      ENDDO.
      PERFORM CLEAR.
    ENDFORM.                    " SAVE_DATA

    solved

  • How to assign cost components to value fields

    Hi,
    Kindly provide me the path or Tcode to assign cost components to value fields.
    thanks
    Sunitha

    Hi Sunita,
    You can go to transaction KE4R. For menu, go to IMG, PA and then valuation, Set up valuation using Material Cost estimate and there you will find 'Assign Vlaue fields'.
    Trust this helps much!
    Cheers!

  • Assign Value Fields Error

    Dear All,
    When I was assigning the Cost Components to Value fields (KE4R),the system is not allowing to save the assignments and throwing the following message:
    When the assignments were saved, any incomplete entries were deleted
    Message no. KE0C215
    Diagnosis
    You have made entries without value field assignments. This means that the entries are incomplete. Only complete entries can be saved.
    System Response
    The entries without value field assignments could not be saved and have been deleted from the assignments."
    Please advise me as any thing is missed out from configuration point of view.
    Regards
    Su

    Hi Subbu
    Suppose your cost component structure has assignments like 10/20/30/40
    In KE4R - You need to specify PV=01, Cost Components as 10, 20, 30, 40 in One row each and specify the F/V indicator and the Value Field in Fld Name1 atleast
    With this, you wil be able to SAVE the entries
    br, Ajay M

  • Issue in Creation of new Value Field in CO-PA

    Hi,
    I have a query in CO-PA Value Field Linking.
    In my Development Client,
    1. Created a New Value Field (No Transport Request Generated)
    2. Linked to the above to new Conditon type created in SD. (Tranport request was generated) i.e. in Flow of Actual Values->Transfer of Billing Documents->Assign Value Fields
    However then i try creating a new Value Field in my Production Client it throws a message 'You have no authorization to change Fields".
    Is this an issue with authorization or i need to transport the Value field too from Development to Production client.
    Please Advise.
    Thanks in Advance,
    Safi

    Thanks Phaneendra for the response.
    The creation of Value field did not create any tranportation request. Will this too be transported if i transport the Operating Concern.
    Please Advise.
    Thanks,
    Safi

Maybe you are looking for